Category: Energy

Collective Mining Drills 180.6 Metres Grading 2.43 g/t Gold Equivalent in the Newly Discovered Main Breccia at the Apollo Target

Post author By admin
Post date August 29, 2022

Figure 1

Plan View of the Guayabales Project Highlighting the Apollo Target

Figure 2

Plan View of the Apollo Target Area Outlining the Porphyry and Breccia Targets, their Related Soil Anomalies and Drill Holes Completed or Currently Underway

Figure 3

Plan View with Traces of drill holes completed to date in the Main Breccia Discovery at Apollo

Figure 4

Apollo Target Cross Section N-S with Core Photo Highlights for APC-5

APC-3 intersected a broad, high-grade zone of breccia mineralization with multiple, overprinting carbonate base metal veins beginning at 200 metres below surface and returned:
- 180.6 metres @ 2.43 g/t gold equivalent.
APC-5 also intersected the main breccia structure with some overprinting carbonate base metal veining beginning at 135 metres below surface and yielded:
- 268.00 metres @ 1.50 g/t gold equivalent.
Three rigs continue to actively drill at Apollo with four additional completed holes awaiting assay results in the near term.
- APC-6 and APC-8 were designed to test the main breccia target at Apollo and both holes intersected more than 265 metres of potentially favourable mineralization.
- APC-4 and APC-7 were NOT designed to test the main breccia target but rather two grassroot concept targets at Apollo. Both holes intersected potentially favorable mineralization with APC-4 cutting a 10-20-metre-thick zone of carbonate base metal veins with visible gold observed in one vein and APC-7 cutting 3 mineralized zones of favorable angular breccia down-hole between 20-40 metres thick.

https://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522ctopid%2522%253A%25221542500%253B1577000%2522%252C%2522hashtag%2522%253A%25221542500%253B1577000%2522%252C%2522wiki_topics%2522%253A%2522Target_Corporation%253BCompany%253BMetre%253BBorehole%253BBreccia%253BOverprinting%253BMultiview_orthographic_projection%2522%252C%2522lmsid%2522%253A%2522a0770000002m0AbAAI%2522%252C%2522revsp%2522%253A%2522globenewswire.com%2522%252C%2522lpstaid%2522%253A%25229f2d7481-3e03-3aa9-aac2-ea88995cde3b%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D

TORONTO, Aug. 29, 2022 (GLOBE NEWSWIRE) — Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from two additional holes completed at the Apollo target (“Apollo”) at the Company’s Guayabales project located in Caldas, Colombia. Apollo is a newly discovered high-grade copper-gold-silver porphyry-related breccia and is one of eight porphyry-related targets situated within a three-by-four-kilometre cluster area generated by the Company through grassroots exploration at the project. As part of its fully funded 20,000+ metre drill program for 2022, there are currently three diamond drill rigs operating at the Apollo target with an additional rig drilling from underground at the Olympus target.

“These latest drill intercepts demonstrate the remarkably continuous nature of this mineralized breccia and overprinting CBM vein system which is now expanding with every drill hole that we complete. With multiple overprinting events depositing mineralization into the system, the Apollo main breccia has all the right markers to evolve into a large-scale discovery. We will remain aggressive with drilling for the balance of 2022,” commented Ari Sussman, Executive Chairman.

A short video presented by David Reading discussing the results can be seen by clicking here.

Details (See Table 1 and Figures 1 – 4)

Five diamond drill holes with accompanying assay results have now been announced at Apollo and resulted in expansion of this main breccia and overprinting vein system with dimensions of up to 300 metres along strike by 100 metres across by 400 metres vertical. The target remains open in all directions and has the potential to evolve into a significant high-grade, bulk tonnage mineralized system.

Drill holes APC-3 and APC-5 were drilled in opposite directions from two separate drill pads (Pads 2 and 3) to the northeast and southwest respectively to test continuity of the mineralized breccia previously intersected in holes APC-1, APC-1W and APC-2 and to test the early working model of the geometry of the main breccia (see press releases dated April 27, 2022, June 22 and July 6, 2022). The following results are highlighted:

APC-3:
180.60 metres @ 2.43 g/t AuEq from 303.40 metres down hole (200 metres vertical) including:
21.10 metres @ 3.47g/t AuEq from 304.9 metres down hole, and
46.60 metres @ 5.13 g/t AuEq from 363.1 metres down hole.

APC-3 is the first hole drilled from a newly constructed pad (Pad 3) located approximately 400 metres to the south of Pad 1 (Holes APC-1 and 1W) and 300 metres to the southwest of Pad 2 (Hole APC-2 and APC-5).

APC-5:
268.00 metres @ 1.50 g/t AuEq from 210.5 metres down hole (135 metres vertical) including:
16.35 metres @ 2.55 g/t AuEq from 210.3 metres down hole,
19.20 metres @ 3.03 g/t AuEq from 252.6 metres down hole, and
22.25 metres @ 2.92 g/t AuEq from 456.6 metres down hole.

APC-5 was drilled from Pad 2 to the SW with a steeper inclination and a 200-metre vertical difference from the previous intercept reported in APC-2.

Mineralization is remarkably continuous along the axis of both intercepts and is hosted within an angular breccia with a sulphide matrix consisting of chalcopyrite (Cu), pyrite and pyrrhotite. Additionally, overprinting carbonate base metal porphyry veins flood the breccia matrix in various locations along the mineralized interval yielding the higher-grade intercepts in both holes. The breccia clasts are all quartz diorite and diorite in composition and this hydrothermal system is clearly linked to a porphyry system.
A further four holes (APC-4, APC-6, APC-7 and APC-8) have now been completed with APC-9, APC-10 and APC-11 now being drilled.
- APC-6 and APC-8 were designed to test the main breccia target at Apollo and both holes intersected more than 265 metres of potentially favourable mineralization.
- APC-4 and APC-7 were NOT designed to test the main breccia target but rather two grassroot concept targets at Apollo. Both holes intersected potentially favorable mineralization with APC-4 cutting a 10-20-metre-thick zone of carbonate base metal veins with visible gold observed in one vein and APC-7 cutting 3 mineralized zones of favorable angular breccia down-hole between 20-40 metres thick.
The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers an 800 metre X 700 metre area. The Apollo target area hosts the Company’s new grassroots main breccia discovery plus additional yet untested breccia, porphyry and vein targets. The Apollo target area also remains open for further expansion.

Table 1: Assays Results

HoleID	From (m)	To (m)	Intercept (m)	Au (g/t)	Ag (g/t)	Cu %	Zn %	Pb %	Mo %	AuEq (g/t)*
APC-3	303.40	484.00	180.60	1.52	39	0.16	0.13	0.11	0.001	2.43
Incl	304.90	326.00	21.10	2.86	24	0.04	0.28	0.28	0.001	3.47
	363.10	409.70	46.60	3.78	58	0.20	0.33	0.27	0.001	5.13
APC-5	210.25	478.25	268.00	0.89	22	0.13	0.11	0.07	0.002	1.50
Incl	210.25	226.60	16.35	1.95	20	0.04	0.308	0.23	0.001	2.55
	252.60	271.80	19.20	2.61	14	0.04	0.271	0.13	0.000	3.03
	456.00	478.25	22.25	2.30	21	0.04	0.332	0.24	0.002	2.92
and	496.80	510.65	13.85	0.71	9	0.02	0.144	0.11	0.001	1.00

*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.014 x 0.95) + (Cu (%) x 1.96 x 0.95) + (Mo (%) x 7.35 x 0.95)+(Zn(%)x 0.86 x 0.95)+ (Pb(%)x 0.44 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Mo – US$15.00/lb, Zn – US$1.75/lb, Pb – US$0.9/lb, Ag – $20/oz and Au – US$1,400/oz and recovery rates of 95% for Au, Ag, Cu, Mo, Zn and Mo. Recovery rate assumptions are speculative as no metallurgical work has been completed to date.
** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.

Figure 1: Plan View of the Guayabales Project Highlighting the Apollo Target
https://www.globenewswire.com/NewsRoom/AttachmentNg/eeb9e76f-a937-4682-a99b-ac6ab09f0c51

Figure 2: Plan View of the Apollo Target Area Outlining the Porphyry and Breccia Targets, their Related Soil Anomalies and Drill Holes Completed or Currently Underway
https://www.globenewswire.com/NewsRoom/AttachmentNg/7eca55ae-f68b-48d2-a2a9-cac7f26df452

Figure 3: Plan View with Traces of drill holes completed to date in the Main Breccia Discovery at Apollo
https://www.globenewswire.com/NewsRoom/AttachmentNg/b56c6abe-3941-438c-8374-c39142a568c3

Figure 4: Apollo Target Cross Section N-S with Core Photo Highlights for APC-5
https://www.globenewswire.com/NewsRoom/AttachmentNg/bb5d25f0-7fdc-4103-9370-fefd14b96872

Marketing Services Agreement

The Company is pleased to announce an agreement with Proven and Probable (“PP”) to provide investor relations services to the Company, subject to approval by the TSX Venture Exchange (the “TSX-V”). PP will provide investor relations services to increase exposure to and awareness of Collective. Services include, but not limited to:

Displaying Collective on its sponsor webpage.
Conduct interviews with management and advisors and publish them on their website and other virtual channels.
Publish third party media regarding Collective on their website and other virtual channels.

The agreement with PP has a term of one year, for which they will be paid an annual fee of USD $72,000. PP currently owns 3,250 common shares of Collective.

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Collective Mining is an exploration and development company focused on identifying and exploring prospective mineral projects in South America. Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, the mission of the Company is to repeat its past success in Colombia by making significant new mineral discoveries and advance the projects to production. Management, insiders and close family and friends own nearly 45% of the outstanding shares of the Company and as a result, are fully aligned with shareholders.

The Company currently holds an option to earn up to a 100% interest in two projects located in Colombia. As a result of an aggressive exploration program on both the Guayabales and San Antonio projects, a total of eight major targets have been defined. The Company has made significant grassroot discoveries at both projects with near-surface discovery holes at the Guayabales project yielding 302 metres at 1.11 g/t AuEq at the Olympus target, 163 metres at 1.3 g/t AuEq at the Donut target and recently, at the Apollo target, 207.15 metres at 2.68 g/t AuEq, 89.4 metres at 2.46 g/t AuEg and 87.8 metres at 2.49 g/t AuEg. At the San Antonio project, the Company intersected, from surface, 710 metres at 0.53 AuEq. (See related press releases on our website for AuEq calculations)

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Contact Information

Collective Mining Ltd.
Steven Gold, Vice President, Corporate Development and Investor Relations
Tel. (416) 648-4065

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

Tags #CNL, #CollectiveMining, #JuniorMining, #MauriceJackson, #ProvenAndProbable

Base Metals Energy Granite Creek Copper Junior Mining Metallic Group Precious Metals

Granite Creek Copper Acquires Copper-Nickel-PGM Project in British Columbia, Canada

Post author By admin
Post date August 24, 2022

Granite Creek Copper, Proven and Probable

VANCOUVER, BC / ACCESSWIRE / August 24, 2022 / Granite Creek Copper Ltd. (TSXV:GCX | OTCQB:GCXXF) (“Granite Creek” or the “Company“) is pleased to announce the acquisition of the Star Cu-Ni-Platinum Group Metal (“PGM”) project, located in the Omineca mineral belt of northern British Columbia.

Granite Creek will secure a 100% interest in the Star project, with no underlying royalty or further obligation, for a total consideration of $10,000 CDN and the issuance of 500,000 common shares of the Company to the estate of Ursula Mowat. The issued shares will have a hold period of 4 months plus one day from the date of issuance. The Company anticipates closing the transaction on or about the August 30, 2022, subject to TSX Venture approval.

Tim Johnson, CEO of Granite Creek Copper, stated, “I was saddened to hear of the passing of Ursula Mowat who had been a pioneer in prospecting for platinum group metals and associated nickel and copper mineralisation in the Omineca region of British Columbia. As one of the first geologists to recognize the potential for the native iron-nickel alloy awaruite to be a significant source of low-cost nickel in the Omineca area, she will be remembered for her ground-breaking work in the industry. To be able to acquire the Star project claims and continue the development work to unlock the potential that Ursula obviously saw is an honour. We look forward to completing our initial work on the claims and relaying to investors the potential for both precious and battery metals on the project.”

“Although Granite Creek’s primary focus remains our flagship Carmacks Copper-Gold-Silver project with the pending updated preliminary economic assessment expected in Q4 2022, the Star project increases our exposure to critical minerals at a time when the Canadian government is incentivizing exploration of listed critical commodities in Canada, as part of a broader push to secure supplies of the minerals in North America for national security and to support the development of carbon free energy sources.”

About the Star Project

The Star project is located 190 kilometers northeast of Smithers, BC and is within 5 kilometers of the Omineca Resource Road and powerline that served the Kemess Mine. The 2500-hectare project is underlain by ultramafic rocks that are prospective for copper, nickel, cobalt, PGMs and gold. Previous work identified multiple showings consisting of copper and nickel sulphide mineralisation with accompanying PGM and gold values. The showings are identified within six distinct zones spread over a 12-kilometer strike length including Queen Zone, GL Zone, HB Zone, HC Zone, Libra Zone, and Ridge Zone (see accompanying Figure 1 for Zone locations as well as additional areas identified for follow up).

Highlights of some of the best mineralised copper and nickel sulfide bearing rock sampled by Ms. Mowat from the various are identified below:

1.18% Cu, 0.17 g/t Au, 0.11 g/t Pd from the Queen Zone
0.78% Cu, 0.25% Ni, 833 ppm Co and 0.27% Cu from the GL Zone.
0.09 % Cu, 1.32 g/t Pt and 1.82 g/t Pd from the HB Zone.
0.87% Cu, 0.18 % Ni, 0.12 g/t Au, 0.41 g/t Pt and 0.83 g/t Pd from the HC Zone.
0.31% Cu Cu from Libra Zone
0.30% Cu, 0.28 g/t Pt, 0.25 g/t Pd from the Ridge Zone.

Granite Creek Copper Ltd., Wednesday, August 24, 2022, Press release picture — Figure 1 Claim Block and Zone Location

Qualified Persons

Ms. Debbie James, P.Geo., a qualified person for the purposes of National Instrument 43-101, has reviewed and approved the technical in this news release. Ms. James is a Senior Geologist with TruePoint Exploration and a Project Manager for Granite Creek Copper.

About Granite Creek Copper

Granite Creek, a member of the Metallic Group of Companies, is a Canadian exploration company focused on the 176-square-kilometer Carmacks project in the Minto copper district of Canada’s Yukon Territory. The project is on trend with the high-grade Minto copper-gold mine, operated by Minto Metals Corp., to the north, and features excellent access to infrastructure with the nearby paved Yukon Highway 2, along with grid power within 12 km. The project is located within the Traditional Territory of Little Salmon/Carmacks First Nation. More information about Granite Creek Copper can be viewed on the Company’s website at www.gcxcopper.com.

FOR FURTHER INFORMATION PLEASE CONTACT:

Timothy Johnson, President & CEO

Telephone: 1 (604) 235-1982

Toll-Free: 1 (888) 361-3494

E-mail: info@gcxcopper.com

Website: www.gcxcopper.com

Metallic Group: www.metallicgroup.ca

Twitter: @yukoncopper

Forward-Looking Statements

This news release includes certain statements that may be deemed “forward-looking statements”. All statements in this release, other than statements of historical facts including, without limitation, statements regarding potential mineralization, historic production, estimation of mineral resources, the realization of mineral resource estimates, interpretation of prior exploration and potential exploration results, the timing and success of exploration activities generally, the timing and results of future resource estimates, permitting time lines, metal prices and currency exchange rates, availability of capital, government regulation of exploration operations, environmental risks, reclamation, title, and future plans and objectives of the company are forward-looking statements that involve various risks and uncertainties. Although Granite Creek Copper believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the companies with securities regulators. Readers are cautioned that mineral resources that are not mineral reserves do not have demonstrated economic viability. Mineral exploration and development of mines is an inherently risky business. Accordingly, the actual events may differ materially from those projected in the forward-looking statements. For more information on Granite Creek Copper and the risks and challenges of their businesses, investors should review their annual filings that are available at www.sedar.com.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE: Granite Creek Copper Ltd.

View source version on accesswire.com:
https://www.accesswire.com/713412/Granite-Creek-Copper-Acquires-Copper-Nickel-PGM-Project-in-British-Columbia-Canada

Tags #InvestingInBatteryMetals, #JuniorMining, #MauriceJackson, #ProvenAndProbable, GCX, Granite Creek Copper, Metallic Group, Tim Johnson

Energy Junior Mining Precious Metals Silver Bullet Mines

Silver Bullet Mines Corp. Updates on Washington Mine in Idaho

Post author By admin
Post date August 23, 2022

Burlington, Ontario–(Newsfile Corp. – August 23, 2022) – Silver Bullet Mines Corp. (TSXV: SBMI) (OTCQB: SBMCF) (‘SBMI’ or ‘the Company’) is pleased to provide an update on its ongoing operations at its 100%-owned Washington Mine in Idaho. This mine is on patented lands.

Site work has commenced to prepare the property for rehabilitation and production. A local portable sawmill operator is on-site to prepare to mill timbers. A contractor has been scheduled to upgrade the access road and to establish site water, electricity and storage. Near-term surface work will focus on rock bolting, screening and shotcreting the historical portal face, as well as preparing timbers and insulation for mine entry support.

Contract terms have been negotiated with an underground mine contractor and, subject to completion of a federal agency filing and the approval of mine design by the Company’s mine engineer, underground rehabilitation is anticipated to begin in or about October. It is not possible at this time to provide a timetable for production as that largely depends upon the rehabilitation process. At some point in time, Mine Safety and Health Administration will carry out an inspection.

The Washington Mine first saw production in the late 1800’s with an average gold grade of one ounce per ton. It again produced gold in the 1930’s during which time the then-owner lacked the process capability needed to produce silver, so a decision was made to block out the silver mineralization with the intention of returning at a future date to extract it. To the best of SBMI’s knowledge, the blocked-out volume remains in situ. A historical report indicates the blocked-out volume contains an estimated 3 million ounces of silver with a grade of 30 to 90 ounces per ton and 15,000 ounces of gold at 0.3 ounces per ton. (Source, “Geological Evaluation”, Roger G. Stoker, P.G. and Ryne C. Stoker, Student Geologist, Energy Services Inc., December, 1981.)

Stoker also indicated the underground location of the “Berger Vein”, described as a “gold ore shoot 25 feet wide, 135 feet long, and unknown depth.” Average grades were given as 0.3 oz/ton gold with unknown silver content. Additional notes in Stoker suggest that the Berger Vein had been intersected in drifting at the 400-foot level.

The references above to data and observations derived from work not carried out by SBMI are of historical nature only and cannot be relied upon at this time. SBMI does not know the methods by which such work was carried out, or whether all or part of it was under the supervision of a Qualified Person, as that term is defined in NI43-101. SBMI refers to such data and observations to inform its knowledge of the area.

SBMI disclosed the results of part of its field program on December 9, 2021 (filed at SEDAR December 15, 2021). A reminder of those strong results is below:

Method	AUAG-GR30	AUAG-GR30
Element	Gold	Silver	Silver
Units	[g/t]	[g/t]	[oz/ton]

LDL*	0.14	5

WASH-ID-001	0.557	4350	127
WASH-ID-002	1.36	4780	139
WASH-ID-003	1.26	4740	138
WASH-ID-004	0.676	2030	59
WASH-ID-005	0.928	2580	75
WASH-ID-006	1.69	2480	73
WASH-ID-007	0.37	1298	41
WASH-ID-008	0.6	1107	35
WASH-ID-009	< 0.14	883	28
WASH-ID-010	4.61	3928	126

Based in part on the information from Stoker, and in part on the data above, and from its own other observations, SBMI took a bulk sample from the Washington Mine, the results of which were disclosed on January 18, 2022. That bulk sample returned 55.5 ounces silver per ton, within the historical parameters of 30 to 90 ounces silver per ton.

Further, the Company may have found the surface expression of the Berger Vein in its 2021 field season. As disclosed on December 9, 2021 soil geochemistry returned gold values up to 9 ppm in areas of shallow soil cover. The Company anticipates that future field work comprising of further soil geochemistry and hand trenching could lead to exposure of in-place gold mineralization.

Underground, historical plan maps depict a cross cut at the main portal level at about 200 feet lower in elevation. The Company believes the cross cut accessed the Berger Vein. SBMI intends to access this cross cut during rehabilitation efforts. Once safe passage through the cross cut is secured, SBMI anticipates systematic sampling, evaluation and potential underground drilling in the Berger Vein area.

For further information, please contact:

John Carter
Silver Bullet Mines Corp., CEO
cartera@sympatico.ca
+1 (905) 302-3843

Peter M. Clausi
Silver Bullet Mines Corp., VP Capital Markets
pclausi@brantcapital.ca
+1 (416) 890-1232

Cautionary and Forward-Looking Statements

This news release contains certain statements that constitute forward-looking statements as they relate to SBMI and its subsidiaries. Forward-looking statements are not historical facts but represent management’s current expectation of future events, and can be identified by words such as “believe”, “expects”, “will”, “intends”, “plans”, “projects”, “anticipates”, “estimates”, “continues” and similar expressions. Although management believes that the expectations represented in such forward-looking statements are reasonable, there can be no assurance that they will prove to be correct.

By their nature, forward-looking statements include assumptions, and are subject to inherent risks and uncertainties that could cause actual future results, conditions, actions or events to differ materially from those in the forward-looking statements. If and when forward-looking statements are set out in this new release, SBMI will also set out the material risk factors or assumptions used to develop the forward-looking statements. Except as expressly required by applicable securities laws, SBMI assumes no obligation to update or revise any forward-looking statements. The future outcomes that relate to forward-looking statements may be influenced by many factors, including but not limited to: the impact of SARS CoV-2 or any other global virus; reliance on key personnel; the thoroughness of its QA/QA procedures; the continuity of the global supply chain for materials for SBMI to use in the production and processing of ore; shareholder and regulatory approvals; activities and attitudes of communities local to the location of the SBMI’s properties; risks of future legal proceedings; income tax matters; fires, floods and other natural phenomena; the rate of inflation; availability and terms of financing; distribution of securities; commodities pricing; currency movements, especially as between the USD and CDN; effect of market interest rates on price of securities; and, potential dilution. SARS CoV-2 and other potential global viruses create risks that at this time are immeasurable and impossible to define.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/134542

Tags #JuniorMining, #MauriceJackson, #MilesFranklin, #ProvenAndProbable, #WashingtonMine, BuckeyeMine, John Carter, maurice jackson, proven and probable, SBMI, Silver Bullet Mines

Energy Exclusive Interviews Gold Shore Resources Junior Mining Precious Metals

GoldShore Resources – New Step-Out Hole and Main Zone Increase Pending Gold Resource

Post author By admin
Post date August 17, 2022

Goldshore Resources – (TSX.V: GSHR | OTCQB: GSHRF)
CEO: Brett Richards
Website: https://goldshoreresources.com/
3D Deck: https://goldshoreresources.com/investors/#corporate-presentation
Company Filings: https://www.sedar.com/DisplayCompanyDocuments.do?lang=EN&i ssuerNo=00030293

Tags #BrettRichards, #GoldShoreResources, #JuniorMining, #MauriceJackson, #MossLakeProperty, #ProvenAndProbable, GSHR

Base Metals Collective Mining Energy Junior Mining Precious Metals

Collective Mining Commences a Phase II Drill Program at the Olympus Target

Post author By admin
Post date August 17, 2022

Figure 1

Plan View of the Guayabales Project Highlighting the Olympus Target

Figure 2

Plan View of the Olympus Target Outlining the Phase II Drilling Location (red circle) and Highlighting Previously Announced Drilling and Channel Sampling Assay Results

Figure 3

Photo of the Underground Drill Chamber and Rig

TORONTO, Aug. 17, 2022 (GLOBE NEWSWIRE) — Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce that drilling has recommenced at the Olympus target (“Olympus”), one of eight newly generated porphyry related targets at the Guayabales project, located in Caldas, Colombia. The phase II drill program, which will be executed exclusively from underground chambers, will follow up on the Phase I program which yielded an important grassroots discovery for the Company highlighted by hole OLCC-3 which averaged 301.9 metres @ 1.11 g/t AuEq (see press release dated March 15, 2022). There are currently four rigs operating at the project as part of the Company’s fully financed minimum 20,000 metre drill program for 2022 with one rig drilling at Olympus and three rigs following up on the recent significant discovery at the Apollo target highlighted by hole APC-2 which averaged 207.15 metres @ 2.68 g/t AuEq (see press release dated August 10, 2022).

Highlights (See Figures 1-3)

Olympus is a large-scale target area measuring up to 1,400 metres north-south by 900 metres east-west and hosts over 50 ancestral mines with over 25 veins mapped from available exposures. The Phase I drill program was focused on the northern portion of this target area and intersected multiple broad zones of mineralization beginning near surface highlighted by:
- 301.9 metres @ 1.11 g/t AuEq (OLCC-3) and
- 216.7 metres @ 1.08 g/t AuEq (OLCC-4) (see press release dated May 9, 2022)

The phase II drill program, which is now underway, will step out up to 500 metres along strike to the southwest from drill hole OLCC-3 into an area where most of the historical and current ancestral mines are located. It is within this southwest area that the Company has reported multiple high-grade chip channel samples taken from underground working faces with grades as high as 485 g/t gold and 2,359 g/t silver (see press releases dated December 1, 2021, and July 19, 2022). Additionally, systematic channel sampling from a crosscut developed within an ancestral mine orthogonal to the strike of the main mineralized system yielded the following assay result:
- 182.45 metres @ 1.15 g/t gold equivalent (true horizontal width) (see press release dated July 19, 2022)
The phase II underground drill program is expected to ramp up in scale for the balance of the year as new drill chambers are constructed and additional rigs are added.
Even though the target is at an early stage of exploration, the Company believes that the decision to construct chambers and drill from underground for its phase II program is an innovative approach to work with the ancestral miners operating at the Olympus target for the following reasons:
- Working underground with the ancestral miners will increase cooperation amongst the stakeholders resulting in ever increasing trust and transparency.
- The Company will promote the best health and safety practices and mine-planning and in return the Company gains an understanding of the challenges the ancestral miners face and underground access to new working faces and veins as they are discovered.
- Drilling from underground will eliminate the challenges associated with lack of drilling angles from surface due to the steep topography resulting in an accelerated timeline to evaluate and advance the Olympus target.
Mineralization at Olympus is characterized by high-grade, late-stage carbonate base metal (“CBM”) sheeted veins impregnating either porphyry diorite host rock or schist host rock, with the former offering potential to produce a bulk tonnage mineralized systems and the latter offering potential to produce high-grade vein systems.

“We are excited to have initiated the phase II drill program at Olympus as we are now targeting what the Company interprets to be the heart of the mineralized system,” commented Ari Sussman, Executive Chairman. “Olympus offers potential for both bulk tonnage and high-grade vein mineralization and we are looking forward to reporting assay results from the new program in due course.”

Figure 1: Plan View of the Guayabales Project Highlighting the Olympus Target

https://www.globenewswire.com/NewsRoom/AttachmentNg/6f9d5006-c691-4716-8b79-c825b54a903a

Figure 2: Plan View of the Olympus Target Outlining the Phase II Drilling Location (red circle) and Highlighting Previously Announced Drilling and Channel Sampling Assay Results

https://www.globenewswire.com/NewsRoom/AttachmentNg/a954ee6d-b120-4f2d-ba72-dc78d30a1fa8

Figure 3: Photo of the Underground Drill Chamber and Rig

https://www.globenewswire.com/NewsRoom/AttachmentNg/5d5f0535-e925-473c-bc0f-37a8f769b0ac

About Collective Mining Ltd.

Twitter: @CollectiveMini1
Instagram: CollectiveMining
LinkedIn: Collective Mining
Facebook: Collective Mining Colombia

To see our latest corporate presentation, please visit www.collectivemining.com

The Company currently holds an option to earn up to a 100% interest in two projects located in Colombia. As a result of an aggressive exploration program at both the Guayabales and San Antonio projects, a total of eleven major targets have been identified. The Company has made significant grassroot discoveries at both projects with near-surface discovery holes at the Guayabales project yielding 302 metres at 1.11 g/t AuEq at the Olympus target, 163 metres at 1.3 g/t AuEq at the Donut target and recently, at the Apollo target, 207.15 metres at 2.68 g/t AuEq. At the San Antonio project, the Company intersected, from surface, 710 metres at 0.53 AuEq. (See related press releases on our website for AuEq calculations)

Qualified Person (QP) and NI43-101 Disclosure

Technical Information

Contact Information

Collective Mining Ltd.
Steve Gold, Vice President, Corporate Development and Investor Relations
Tel. (416) 648-4065

FORWARD-LOOKING STATEMENTS

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

Tags #AriSussman, #CollectiveMining, #InvestingInBatteryMetals, #JuniorMining, #MauriceJackson, #ProvenAndProbable, CNL

Base Metals Energy Junior Mining Precious Metals Rover Metals

Rover Metals Options Brownfields Critical Minerals Project At 60th Parallel, NT, Canada

Post author By admin
Post date August 16, 2022

VANCOUVER, British Columbia, Aug. 16, 2022 (GLOBE NEWSWIRE) — Rover Metals Corp. (TSXV: ROVR) (OTCQB: ROVMF) (FSE:4XO) (“Rover” or the “Company”) is pleased to announce that it has signed a letter of intent to option a 90% ownership interest in the Indian Mountain Lake Volcanic Massive Sulphide project, NT, Canada. The Indian Mountain Lake Project is the Company’s first district scale land package, representing approximately 30,000 acres of greenstone belt. The project has a historical Zinc-Lead-Silver-Copper geological resource.

Indian Mountain Lake VMS Project
The Indian Mountain Lake VMS Project has had exploration dating back to the 1940s and has a historical resource spread across four zones on the project. The BB Zone and Kennedy Lake Zone have a combined historic resource of 1,400,000 tons grading 10% combined zinc and lead with 3.5 OPT (ounces per ton) of silver*. Approximately 900 metres west of the BB Zone, the Kennedy Lake West Zone has a historic resource of 610,000 tons grading 1.15% copper*. About 8 km southeast of the BB Zone, the Susu Lake Zone, has a historical resource consisting of 142,500 tons grading 0.95% copper*.

The property is located approximately 195 km east-northeast of Yellowknife, NT, off the eastern arm of Great Slave Lake. Seasonal access relies upon fixed or rotor wing support. A right of way was cleared to the project from Thompson Landing in the 1970’s. If this right of way were to be brushed out it would provide barge access at Thompson Landing, from Yellowknife, with ground transportation, considerably lowering any logistical costs. Future Government of Canada federally funded hydro-energy infrastructure could come close to the project if the Taltson Hydro Dam expansion proceeds through the eastern arm of Great Slave Lake into Yellowknife. At the southwest-end of Great Slave Lake, Osisko Metals is gearing up to reopen the Pine Point Zinc-Lead Mine. At nearby Hay River, NT, there is a rail line to the Tech Resources Zinc Refinery in Trial, BC.

*These resources are historic in nature. Further drilling is needed to bring them up to CIM Definition Standards. The historic data has not been verified by Rover. The historic information is provided in the 2103 Assessment Report for Indian Mountain Lake which is in public record with the Government of the Northwest Territories.

Technical information has been approved by Gary Vivian, M.Sc., P.Geo., QP for the purposes of NI 43-101.

Judson Culter, CEO at Rover Metals, states, “We believe the Indian Mountain Lake VMS Project has the potential to be a Tier 1 Zinc and Copper project. The historical resource represents only 3% of the total land package. The blue sky on the remaining 97% of the greenstone belt is: (1) for additional zinc resources and; (2) a significant new copper discovery. Historical workings also document the presence of copper-gold skarn systems. The historic zones are open along strike and below a vertical depth of 150 meters.

In Canada, Zinc and Copper are on the Federal Government’s Critical Minerals List, and part of the Canadian Government’s Critical Minerals Strategy. As a result, the project qualifies for the 30% critical mineral flow-through investor tax credit.

Management of the Company also remain committed to the further development of its gold projects, and hope to be able to provide a news release about the Cabin Gold Project in the coming weeks.”

Map of Indian Mountain Lake Greenstone Belt

An updating release will be provided once the Company has executed its Definitive Option Agreement.

New Website
In connection with the Company expanding into critical minerals, the Company will be launching a new website in the coming days featuring the Indian Mountain Lake VMS Project. Investors are encouraged to visit our website to review the Company’s new investor materials, as the become available.

About Rover Metals
Rover is now both a critical minerals exploration company as well as a precious metals exploration company, specialized in North American (Canada and U.S.) mineral resource development. Five of the Company’s six resource projects are located near to the city of Yellowknife, 60^th parallel, Canada.

You can follow Rover on its social media channels:
Twitter: https://twitter.com/rovermetals
LinkedIn: https://www.linkedin.com/company/rover-metals/
Facebook: https://www.facebook.com/RoverMetals/
for daily company updates and industry news, and
YouTube: https://www.youtube.com/channel/UCJsHsfag1GFyp4aLW5Ye-YQ?view_as=subscriber
for corporate videos.
Website: https://www.rovermetals.com/

ON BEHALF OF THE BOARD OF DIRECTORS
“Judson Culter”
Chief Executive Officer and Director

For further information, please contact:
Email: info@rovermetals.com
Phone: +1 (778) 754-2617

Statement Regarding Forward-Looking Information
This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause Rover’s actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur. There can be no assurance that such statements prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements, and readers are cautioned not to place undue reliance on these forward-looking statements. Any factor could cause actual results to differ materially from Rover’s expectations. Rover undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.

THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE REPRESENTS THE EXPECTATIONS OF THE COMPANY AS OF THE DATE OF THIS NEWS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE COMPANY MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE LAWS.

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OF THIS RELEASE.

Tags #CabinGoldProject, #InvestingInBatteryMetals, #JuniorMining, #MauriceJackson, #ProvenAndProbable, #ROVR, Rover Metals

Base Metals Energy Junior Mining Precious Metals

Bravo Intercepts High-Grade Nickel/Copper Massive Sulphide Mineralization at Luanga

Post author By admin
Post date August 16, 2022

Results Include 11m @ 2.04% Nickel + 1.23% Copper (PGM Results Pending)

VANCOUVER, BC, Aug. 16, 2022 /CNW/ – Bravo Mining Corp. (TSX.V: BRVO), (“Bravo” or the “Company“) today announced high grade nickel and copper assay results from the previously released diamond drill hole DDH22LU047 at its Luanga platinum group metals (palladium + platinum + rhodium) + gold + nickel (PGM+Au+Ni) project (“Luanga“), located in the Carajás Mineral Province, state of Pará, Brazil. The high-grade intercept of 11.04m grading 2.04% nickel and 1.23% copper occurs in massive and semi-massive sulphides – a style of mineralization not previously observed at Luanga, increasing the target type potential at the project. Palladium, platinum and rhodium assay results are pending.

Highlights:

11.04m @ 2.04% nickel and 1.23% copper, from 131.11m
Contractors arriving onsite this week to commence Downhole Transient Electromagnetic (“DHTEM”) surveying at Luanga, starting with DDH22LU047
Palladium, platinum and rhodium results are pending

Bravo Mining Corp. Logo (CNW Group/Bravo Mining Corp.)

“As announced in Bravo’s August 3^rd, 2022 news release, high-grade nickel-copper mineralization at these concentrations, has not been observed previously at Luanga and could represent a new type of mineralisation that occurs within the Luanga PGM deposit, or a potential indication of feeder zones,” said Luis Azevedo, Chairman and CEO of Bravo. “DHTEM surveying will commence shortly, which should allow us to vector in on the continuation of high-grade nickel/copper massive sulphides, guiding follow-up drilling.”

Luanga Drill Program

The Phase 1 diamond drill program continues as planned at Luanga. With six drill rigs on site, drilling is now in progress in various locations along the entire 7km strike length of the known mineralization, including to the north where the latest and final surface access agreements were recently signed (see August 2, 2022 news release).

Phase 1 drilling is designed to confirm, infill and step out from the previously defined PGM+Au+Ni mineralization in order to increase confidence in the geological model and provide the basis for future mineral resource estimates. Additionally, drilling will target potential extensions to the mineralization at depth, as well as exploration targets at Luanga.

Complete Table of Assay Results

HOLE-ID	From(m)	To(m)	Thickness (m)	Ni(%)	Cu(%)	Pd(g/t)	Pt(g/t)	Rh(g/t)	Au(g/t)	TYPE
DDH22LU047	131.11	142.15	11.04	2.03	1.23	Pending	FR
Including	132.26	136.80	4.54	2.77	0.54	Pending	FR
Including	136.80	137.60	0.80	0.98	10.82	Pending	FR

All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole
Given the orientation of the holes and the mineralization, the intercepts are estimated to range from ~80 to 90% of true thickness.
FR = Fresh Rock.

DDH22LU047: High grade massive sulphide nickel mineralization at 136.0m* (CNW Group/Bravo Mining Corp.)

DDH22LU047: High grade breccia semi–massive sulphide nickel-copper mineralization, from at 137.0m* (CNW Group/Bravo Mining Corp.)

DDH22LU047: Drill core showing massive and brecciated semi-massive sulphides, from 131.1m to 142.1m*
* Depths and widths are downhole (CNW Group/Bravo Mining Corp.) — DDH22LU047: Drill core showing massive and brecciated semi-massive sulphides, from 131.1m to 142.1m* * Depths and widths are downhole (CNW Group/Bravo Mining Corp.)

About Bravo Mining Corp.

Bravo is a Canada and Brazil-based mineral exploration and development company focused on advancing its Luanga PGM + Au + Ni Project in the world-class Carajás Mineral Province of Brazil.

The Luanga Project benefits from being in a location close to operating mines, with excellent access and proximity to existing infrastructure, including road, rail and clean and renewable hydro grid power. The project area was previously de-forested for agricultural grazing land. Bravo’s current Environmental, Social and Governance activities includes replanting trees in the project area, hiring and contracting locally, and ensuring protection of the environment during its exploration activities.

Bravo was founded by a management team and board with extensive Brazilian and PGM exploration, permitting, project financing, construction and operating experience. This includes Luis Azevedo, Executive Chairman & CEO; Simon Mottram, President; Alex Penha, EVP Corporate Development; and Independent Directors, Dr. Nicole Adshead-Bell (Lead Director), Stuart Comline, Tony Polglase and Stephen Quin.

Technical Disclosure

Technical information in this news release has been reviewed and approved by Simon Mottram, F.AusIMM (Fellow Australia Institute of Mining and Metallurgy), President of Bravo Mining Corp. who serves as the Company’s “qualified person”, as defined in National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101“). Mr. Mottram has verified the technical data and opinions contained in this news release.

Forward Looking Statements

This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as “confirm”, “designed”, “increase confidence”, “interpreted”, “pending”, and other similar words, phrases or statements that certain events or conditions “should”, or “will” occur.
In particular, this news release contains forward-looking information pertaining to the Company’s ongoing re-assay and drill programs and the results thereof; the expected arrival of geophysical equipment and the results of such surveys; the potential for the definition o new styles of mineralization and extensions to depth and the Company’s plans in respect thereof. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, environmental risks, limitations on insurance coverage; and other risks and uncertainties involved in the mineral exploration and development industry. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including, but not limited to, the assumption that the assay results confirm the interpreted mineralization contains significant values of nickel, copper and also contain PGMs and Au; final drill and assay results will be in line with management’s expectations; that activities will not be adversely disrupted or impeded by regulatory, political, community, economic, environmental and/or healthy and safety risks; that the Luanga Project will not be materially affected by potential supply chain disruptions; and general business and economic conditions will not change in a materially adverse manner. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.

Schedule 1: Drill Hole Collar Details

HOLE-ID	Company	East (m)	North (m)	RL (m)	Datum	Depth(m)	Azimuth	Dip
DDH22LU047	Bravo	659899.99	9342475.05	275.18	SIRGAS2000 UTM22S	170.05	090	-60

Schedule 2: Assay Methodologies and QAQC

Samples follow a chain of custody between collection, processing and delivery to the ALS laboratory in Parauapebas, state of Pará, Brazil. The drill core is delivered to the core shack at Bravo’s Luanga site facilities and processed by geologists who insert certified reference materials, blanks and duplicates into the sampling sequence. Drill core is half cut and placed in secured polyurethane bags, then in security-sealed sacks before being delivered directly from the Luanga site facilities to the Parauapebas ALS laboratory by Bravo staff. Additional information about the methodology can be found on the ALS global website (ALS) in the analytical guides. IN this case a split is collected by Bravo staff and securely delivered to the Intertek laboratory in Parauapebas where it was assayed by high priority for ore grade Ni and Cu.

Quality Assurance and Quality Control (“QAQC“) is maintained internally at the lab through rigorous use of internal certified reference materials, blanks, and duplicates. An additional QAQC program is administered by Bravo using certified reference materials, duplicate samples and blank samples that are blindly inserted into the sample batch. If a QAQC sample returns an unacceptable value an investigation into the results is triggered and when deemed necessary, the samples that were tested in the batch with the failed QAQC sample are re-tested.

Bravo ALS
Preparation	Method	Method	Method	Method

For All Elements	Pt, Pd, Au	Rh	Ni-Sulphide	Trace Elements
PREP-31B	PGM-ICP27	Rh-MS25	Ni-ICP05	ME-ICP61

Bravo Intertek
Method

Ni, Cu Sulphide
Ni-ICP05

Location of Bravo Drilling Reported in this Document (CNW Group/Bravo Mining Corp.)

View original content to download multimedia:https://www.prnewswire.com/news-releases/bravo-intercepts-high-grade-nickelcopper-massive-sulphide-mineralization-at-luanga-301606119.html

SOURCE Bravo Mining Corp.

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/August2022/16/c1007.html

Tags #JuniorMining, #MauriceJackson, #ProvenAndProbable, Bravo Mining, BRVO, Luis Azevedo

Energy Junior Mining Precious Metals Silver Bullet Mines

Silver Bullet Mines Corp. Closes Financing

Post author By admin
Post date August 16, 2022

Burlington, Ontario–(Newsfile Corp. – August 15, 2022) – Silver Bullet Mines Corp. (TSXV: SBMI) (OTCQB: SBMCF) (‘SBMI’ or ‘the Company’) is very pleased to announce it has closed on its debt financing (the “Financing”), previously announced on August 11, 2022.

The Financing is with SBMI’s largest institutional shareholder (the “Lender”), pursuant to which SBMI has borrowed CDN$650,000 (six hundred and fifty thousand dollars) from the Lender for an 18-month term. The Financing provides for an 8% annual interest rate and a conversion feature, whereby upon conversion the loan may convert into 2,166,667 units (each, a “Unit”) at an effective price of $0.30 per Unit. This is at a premium to the current market price. Each Unit is comprised of one common share and one common share purchase warrant exercisable at $0.35 for a four-year term.

“Management and the board have been working on this for a while,” said SBMI’s CEO, A. John Carter. “We believe this to be very attractive for the lender and friendly to our shareholders.”

SBMI also reports that Sepro Mineral Systems Corp., who assisted in the design of parts of SBMI’s mill in Arizona, is currently onsite and is assisting the Company in fine-tuning various components of the mill. The ramp-up using lower grade material continues.

Silver coming off the shaker table; picture taken Aug 15/22

To view an enhanced version of this photo, please visit:
https://images.newsfilecorp.com/files/8464/133956_a8aaf062a470f82c_001full.jpg

For further information, please contact:

John Carter
Silver Bullet Mines Corp., CEO
cartera@sympatico.ca
+1 (905) 302-3843

Peter M. Clausi
Silver Bullet Mines Corp., VP Capital Markets
pclausi@brantcapital.ca
+1 (416) 890-1232

Cautionary and Forward-Looking Statements

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/133956

Tags #BuckeyeMine, #InvestingInBatteryMetals, #JuniorMining, #MauriceJackson, #ProvenAndProbable, #SBMI, #SilverBulletMines, #WashingtonMine, John Carter

Energy Junior Mining Lion One Metals Precious Metals

Lion One Confirms High-Grade Gold Feeder Zone at Tuvatu, Fiji with TUDDH-601 Returning 54.9m of 12.22 g/t Au Including 20.10m of 23.03 g/t Au

Post author By admin
Post date August 15, 2022

North Vancouver, British Columbia–(Newsfile Corp. – August 15, 2022) – Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) (“Lion One” or the “Company”) is pleased to announce results from ongoing follow-up drilling to the previously reported high-grade intercept of 75.90m of 20.86 g/t Au in TUG-141 (June 6, 2022 NR), at its Tuvatu Alkaline Gold Project in Fiji.

Results for the first two diamond drill holes carried out as follow-up drilling from the significant new feeder zone mineralization in TUG-141 and reported on June 6, 2022 have been received and compiled. TUDDH-601 was drilled from surface at -85° and was designed to further test the high-grade zone encountered in TUG-141, and TUG-145 was drilled from the same underground collar location as TUG-141, collared at 3° steeper, and designed to test directly below the TUG-141 drill trace (Figure 1). TUG-145 drifted to the west and lifted more than expected.

Highlight intercepts from holes TUDDH-601 and TUG-145 include:

TUDDH-601

26.20 g/t Au over 1.20m from 165.7-166.9m;
115.42 g/t Au over 1.80m from 252.4-254.2m;
12.22 g/t Au over 54.90m from 576.1-631.0m, including
– 23.02 g/t Au over 20.10m from 576.1-596.2m, which includes 29.24 g/t Au over 15.6m;
– 8.09 g/t Au over 20.70m from 602.5-623.2m, which includes 9.25 g/t Au over 7.80m and 15.03 g/t Au over 5.40m

TUG-145

6.72 g/t Au over 15.30m from 110.4-125.7m, including
– 41.16 g/t Au over 1.20m from 117.3-118.5m;
20.38 g/t Au over 0.90m from 278.7-279.6m;
28.68 g/t Au over 1.80m from 305.4-307.2m;
4.69 g/t Au over 10.20m from 357.9-368.1m, including
– 9.58 g/t Au over 1.20m from 358.8-360.0m,
– 6.99 g/t Au over 1.20m 362.1-363.3m, and
– 8.41 g/t Au over 1.50m from 363.9-365.4m
17.80 g/t Au over 0.30m from 405.9-406.2m;
8.73 g/t Au over 6.00m from 424.2-430.2, including
– 31.94 g/t Au over 1.20m from 426.3-427.5m
18.15 g/t Au over 0.60m from 598.5-599.1m

TUDDH-601 drilled from surface, was a near-vertical drill test of the high-grade gold zone encountered by TUG-141. TUDDH-601 is estimated to have drilled to within <2m of TUG-141. This test indicates that high-grade mineralization corresponding to that in TUG-141 is indeed hosted primarily by altered andesite rather than adjacent monzonite. High-grade mineralization, 54.9m of 12.22 g/t Au, was first intersected at a downhole depth of 576.1m continuing virtually uninterrupted to a downhole depth of 631.0m (Figure 2). Only one low-grade interval, hosted by monzonite and measuring 6.3m long was intersected. Above this low-grade interval, 23.02 g/t Au over 20.1m was encountered including 29.24 g/t Au over 15.60m, and below, 8.09 g/t Au over 20.7m, including 15.03 g/t Au over 5.40m and 9.25 g/t Au over 7.80m, respectively (Figure 3).

TUG-145 represented an inclined hole 3° steeper than TUG-141, drilled from the same underground collar location (Table 2 below). The hole drifted west and lifted such that the effective distance between TUG-141 and TUG-145 was approximately 21m at the 600m depth mark, with TUG-145 west of TUG-141. While TUG-141 drilled out of the less favourable monzonite and into the favourable andesite at approximately 390m depth, TUG-145 remained in monzonite until a depth of approximately 600m, indicating a southward shift of this lithological contact at this location, as illustrated schematically in Figure 4. It is thought that the monzonite to andesite contact recorded by TUG-141, is shifted south along a N-S structure, likely UR1, and that the high-grade continuous mineralization recorded by TUG-141 is largely focussed on the andesite side (east side) of this contact. Therefore, Lion One believes that the lithological contact between monzonite and andesite forms a primary control on high-grade mineralization at this location, and that the projection of this contact to depth as well as along strike, represents a first-order target for further follow-up drilling.

The next two planned follow up holes to TUG-141 are shown on Figure 5 below. One hole from surface, already underway as TUDDH-608, was collared at a planned azimuth of N089° and dip of -65°, targeting the high-grade intercept in TUG-141, and a second hole will collar from underground, approximately 180m further south along the decline from the TUG-141 and 145 collars, and target the same high-grade intercept at a planned azimuth of N139° and dip of -66°. The combination of these two holes should provide good information on the potential width and possible down plunge extent of the TUG-141/TUDDH-601 high-grade zone, which should allow for a realistic estimate of the volume, and hence contained Au ounces, in this zone. Additional follow-up holes are being planned as well.

Lion One technical advisor Quinton Hennigh stated, “As we drill more, the geologic setting of this important feeder zone is coming into clarity. It occurs at a major structural intersection where the north-south-trending UR1 & 2 lodes meet the northeast-trending UR4 & 5 lodes. Importantly, high-grade mineralization appears to be focussed within andesite host rocks just outboard from the contact with less favourable monzonite. With this understanding, we believe that further high-grade can be pursued along this contact at depth. The team is currently lining up more holes to test this extension.”

Lion One CEO Walter Berukoff further stated, “The spectacular discovery previously announced as the result of drilling hole TUG-141 has been confirmed by follow-up drilling in hole TUDDH-601. The positive confirmation of the longest high-grade intercept yet recorded at Tuvatu gives us further confidence that we are just now beginning to unlock the true potential of the 500 Zone high-grade feeder. The persistent success of our systematic drilling programs at Tuvatu underscores the significance of Tuvatu as a potentially multi-million ounce, world-class high-grade Au deposit.”

Figure 1. Image from Leapfrog software showing the modeled lodes representing the Tuvatu resource in semi-transparent gray with the traces of drill holes TUG-141, TUG-145 drilled from the same location along the exploration decline, and TUDDH-601 drilled at a dip of -85° from surface. Lower image overlays the mineralized intervals as colored discs that reflect grade (see Figure 3 caption for grade scale).

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/133850_lionone_fig1.png

Figure 2. A) TUDDH-601 at 579.7m showing pervasively altered andesite grading 142.33 g/t Au; B) close-up of photo A; C) TUDDH-601 at 580.0m grading 108.99 g/t Au; D) close-up of photo C.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/133850_lionone_fig2.png

Figure 2 contd. E) TUDDH-601 at 580.2m qtz-py hydrothermal bx vein grading 140.99 g/t Au; F) close-up of photo A; G) TUDDH-601 at 583.5m showing hydrofractured qtz-py vein grading 4.73 g/t Au; H) TUDDH-601 at 593.9m showing coarse visible gold in qtz-py veining grading 230.37 g/t Au.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/133850_lionone_fig2cont.png

Figure 2 contd. I) TUDDH-601 at 592.2m showing very fine py-VG veins in pervasively altered andesite grading 33.77 g/t Au; J) close-up of photo I; K) TUDDH-601 at 609.0m qtz-py-roscoelite vein grading 10.49 g/t Au; L) TUDDH-601 at 610.8m qtz-py vein grading 20.31 g/t Au.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/133850_lionone_fig2cont2.png

Figure 2 contd. M) TUDDH-601 monzonite-andesite contact at 617.0m grading 5.48 g/t Au; N) TUDDH-601 at 617.8m qtz-py vein in bleached andesite grading 11.67 g/t Au; O) TUDDH-601 at 621.5m qtz-py vein in bleached andesite grading 2.54 g/t Au; P) TUDDH-601 at 628.3m qtz-py vein in sercitized andesite grading 20.14 g/t Au.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/133850_lionone_fig2cont3.png

Figure 3. Vertical section looking West of the mineralized intervals in TUG-141 and TUDDH-601 that were drilled in essentially the same plane. Grades in ppm Au shown as colored discs are as follows: 0.1-0.2, blue; 0.2-0.3, light blue; 0.3-0.5, green; 0.5-1.0, yellow; 1-3, orange; 3-10, red; >10, fuschia.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/133850_1ce6c2b80467589e_063full.jpg

Figure 4. Schematic diagram of a horizontal plan at approximately RL= -260m illustrating the interpreted interplay between mineralized lodes and lithologic contact between monzonite (pink) and andesite (green), in the area of the TUG-141 high-grade discovery. The NE-trending monzonite-andesite contact is shifted to the south along UR1 at the location of the mineralization intersected by drill holes TUG-141 and TUDDH-601. Lodes UR1-UR2 pair appears to merge together at depth, with the NS-oriented lodes intersected by the NE-SW UR4 lode.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/133850_1ce6c2b80467589e_064full.jpg

Figure 5. Figure looking North and down 45° showing the next two planned drill holes (yellow) testing the high-grade zone discovery of TUG-141. Planned hole 1 from surface which has started drilling as TUDDH-608 will test the width of the zone; planned hole 2 from the underground decline is scheduled to begin drilling soon and will test for possible down plunge extent.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/133850_1ce6c2b80467589e_065full.jpg

Table 1: Drilling intervals returning >0.5 g/t Au (intervals > 3.0 g/t Au cutoff are shown in red, and intervals > 9.0 g/t Au or longer than 1.2m are bolded).

Hole ID	From (m)	To (m)	Interval (m)	Grade (g/t Au)
TUDDH-601	165.7	166.9	1.2	26.20
Incl.	165.7	166.3	0.6	13.38
Incl.	166.3	166.9	0.6	39.01
	168.1	171.7	3.6	1.00
	190.3	190.6	0.3	4.21
	252.4	254.2	1.8	115.42
Incl.	252.4	252.7	0.3	26.29
Incl.	252.7	253.3	0.6	159.98
	284.8	286.3	1.5	2.37
	362.8	363.4	0.6	1.61
	474.1	474.4	0.6	7.29
Incl.	474.1	474.4	0.3	5.88
Incl.	474.4	474.7	0.3	8.69
	569.8	570.4	0.6	1.49
	576.1	596.2	20.1	23.02
Incl.	579.4	579.7	0.3	142.60
Incl.	579.7	580.0	0.3	109.00
Incl.	580.0	580.3	0.3	140.90
Incl.	580.3	580.6	0.3	263.40
Incl.	580.6	580.9	0.3	74.33
Incl.	580.9	581.2	0.3	25.89
Incl.	581.8	582.4	0.6	18.52
Incl.	583.9	584.2	0.3	5.03
Incl.	585.7	586.3	0.6	9.59
Incl.	586.3	586.6	0.3	9.43
Incl.	586.6	586.9	0.3	15.49
Incl.	586.9	587.2	0.3	18.06
Incl.	587.2	587.8	0.6	5.35
Incl.	588.1	588.7	0.6	39.23
Incl.	588.7	589.0	0.3	7.13
Incl.	589.0	589.6	0.6	26.15
Incl.	591.4	592.0	0.6	10.80
Incl.	592.0	592.6	0.6	33.77
Incl.	592.6	593.2	0.6	10.94
Incl.	593.2	593.5	0.3	28.67
Incl.	593.5	593.8	0.3	32.64
Incl.	593.8	594.1	0.3	230.40
Incl.	594.4	594.7	0.3	18.26
Incl.	594.7	595.0	0.3	50.32
	598.0	600.7	2.7	0.50
	602.5	623.2	20.7	8.09
Incl.	603.1	603.7	0.6	21.52
Incl.	603.7	604.3	0.6	9.40
Incl.	606.1	606.7	0.6	20.45
Incl.	606.7	607.3	0.6	10.48
Incl.	607.3	607.9	0.6	19.67
Incl.	608.5	608.8	0.3	20.64
Incl.	608.8	609.4	0.6	10.49
Incl.	609.4	609.7	0.3	5.74
Incl.	610.6	610.9	0.3	20.31
Incl.	612.7	613.0	0.3	19.61
Incl.	613.0	613.3	0.3	120.91
Incl.	613.6	613.9	0.3	7.67
Incl.	613.9	614.2	0.3	12.69
Incl.	614.2	614.8	0.6	12.29
Incl.	615.1	615.7	0.6	11.67
Incl.	615.7	616.3	0.6	9.65
Incl.	616.9	617.5	0.6	5.48
Incl.	617.5	618.1	0.6	11.67
Incl.	620.8	621.1	0.3	5.14
	625.9	631.0	5.1	8.37
Incl.	626.8	627.1	0.3	10.01
Incl.	627.7	628.3	0.6	20.14
Incl.	629.5	629.8	0.3	18.01
Incl.	630.1	630.7	0.6	24.08
	632.2	632.5	0.3	0.62
	639.1	640.6	1.5	0.58
	842	842.3	0.3	0.50

TUG-145	110.4	125.7	15.3	6.72
Incl.	110.4	110.7	0.3	18.77
Incl.	110.7	111.0	0.3	6.76
Incl.	111.9	112.2	0.3	6.30
Incl.	112.2	112.5	0.3	11.30
Incl.	115.5	115.8	0.3	6.91
Incl.	115.8	116.1	0.3	6.36
Incl.	117.3	117.6	0.3	40.73
Incl.	117.6	117.9	0.3	89.51
Incl.	117.9	118.2	0.3	9.80
Incl.	118.2	118.5	0.3	28.45
Incl.	120.3	120.6	0.3	7.77
Incl.	120.6	120.9	0.3	5.01
Incl.	120.9	121.2	0.3	8.62
Incl.	121.2	121.5	0.3	5.17
Incl.	121.5	121.8	0.3	13.73
Incl.	125.1	125.4	0.3	10.43
	237.6	239.1	1.5	1.36
	262.8	263.4	0.6	3.31
Incl.	262.8	263.4	0.3	5.01
	278.7	279.6	0.9	20.38
Incl.	278.7	279.0	0.3	24.16
Incl.	279.0	279.3	0.3	35.33
	305.4	307.2	1.8	28.68
Incl.	305.4	305.7	0.3	150.76
Incl.	305.7	306.0	0.3	11.51
	357.9	368.1	10.2	4.69
Incl.	358.8	359.1	0.3	6.25
Incl.	359.1	359.4	0.3	19.46
Incl.	359.4	359.7	0.3	9.21
Incl.	360.6	360.9	0.3	5.42
Incl.	361.8	362.1	0.3	5.75
Incl.	362.1	362.4	0.3	9.15
Incl.	362.4	362.7	0.3	9.83
Incl.	363.0	363.3	0.3	7.28
Incl.	363.9	364.2	0.3	14.47
Incl.	365.1	365.4	0.3	22.39
Incl.	366.6	366.9	0.3	6.03
Incl.	367.2	367.5	0.3	11.42
	373.5	374.1	0.6	0.57
	375.3	376.8	1.5	0.83
	378.6	378.9	0.3	2.05
	380.4	381.3	0.9	1.53
	387.9	388.5	0.6	1.30
	405.9	406.2	0.3	17.8
	424.2	430.2	6.0	8.73
Incl.	424.5	424.8	0.3	5.83
Incl.	425.7	426.0	0.3	8.23
Incl.	426.0	426.3	0.3	5.26
Incl.	426.3	426.6	0.3	10.37
Incl.	426.6	426.9	0.3	34.48
Incl.	426.9	427.2	0.3	76.12
Incl.	427.2	427.5	0.3	6.81
Incl.	429.9	430.2	0.3	11.61
	452.7	453.0	0.3	1.08
	598.5	599.1	0.6	18.15
Incl.	598.5	598.8	0.3	33.68
	600.6	600.9	0.3	0.91

Table 2: Survey details of diamond drill holes referenced in this release

Hole No	Coordinates (Fiji map grid)	RL	final depth	dip	azimuth
	N	E		m		(TN)
TUDDH-601	3920444	1876508	347.9	878.9	-85	061
TUG-141	3920759	1876459	139.2	675.0	-55	162
TUG-145	3920759	1876459	139.1	692.1	-58	161
TUDDH-608	3920472	1876281	286.4	800 planned	-65	089
planned hole 2	3920582	1876435	118.0	500 planned	-66	139

Qualified Person

In accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”), Sergio Cattalani, P.Geo, Senior Vice President Exploration, is the Qualified Person for the Company and has reviewed and is responsible for the technical and scientific content of this news release.

QAQC Procedures

Lion One adheres to rigorous QAQC procedures above and beyond basic regulatory guidelines in conducting its sampling, drilling, testing, and analyses. The Company utilizes its own fleet of diamond drill rigs, using PQ, HQ and NQ sized drill core rods. Drill core is logged and split by Lion One personnel on site. Samples are delivered to and analysed at the Company’s geochemical and metallurgical laboratory in Fiji. Duplicates of all samples with grades above 0.5 g/t Au are both re-assayed at Lion One’s lab and delivered to ALS Global Laboratories in Australia (ALS) for check assay determinations. All samples for all high-grade intercepts are sent to ALS for check assays. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10.00 g/t Au are then re-analysed by gravimetric method. For samples that return greater than 0.50 g/t Au, repeat fire assay runs are carried out and repeated until a result is obtained that is within 10% of the original fire assay run. For samples with multiple fire assay runs, the average of duplicate runs is presented. Lion One’s laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples are sent to ALS labs in Townsville QLD and are analysed by the same methods (Au-AA26, and Au-GRA22 where applicable). ALS also analyses for 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES (method ME-ICP61).

About Lion One Metals Limited

Lion One’s flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One’s CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.

On behalf of the Board of Directors of
Lion One Metals Limited
“Walter Berukoff“
Chairman and CEO

For further information
Contact Investor Relations
Toll Free (North America) Tel: 1-855-805-1250
Email: info@liononemetals.com
Website: www.liononemetals.com

Neither the TSX Venture Exchange nor its Regulation Service Provider
accepts responsibility for the adequacy or accuracy of this release.

This press release may contain statements that may be deemed to be “forward-looking statements” within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “proposed”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Limited’s current beliefs and is based on information currently available to Lion One Metals Limited and on assumptions Lion One Metals Limited believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Limited or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Limited, general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Limited has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Limited does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/133850

Tags #JuniorMining, #MauriceJackson, #ProvenAndProbable, #QuintonHennigh, #Tuvatu, #WalterBerukoff, LIO

Energy Junior Mining Precious Metals Silver Hammer

Silver Hammer Reports on Drilling Progress at the Silver Strand Project in Idaho

Post author By admin
Post date August 15, 2022

Figure 1

Planned Phase II Drilling at Silver Strand

VANCOUVER, British Columbia, Aug. 15, 2022 (GLOBE NEWSWIRE) — Silver Hammer Mining Corp. (CSE: HAMR; OTCQB: HAMRF) (the “Company” or “Silver Hammer”) is pleased to announce that the first drillhole of an 11-hole Phase II diamond drill program (“Phase II Drill Program”) has been completed at its past-producing Silver Strand Project in Idaho.

The Phase II Drill Program, which is utilizing the Company’s established underground drilling station, is focused on expanding known silver-gold mineralization further down-dip, while also testing the potential for additional mineralized chutes (see Figure 1). The Company has generated priority targets based on a drone supported magnetic survey, Phase I drilling results, and the integration of historical drilling data acquired from previous operators of the Silver Strand Project (see Jan 26, 2022 news release).

“We are excited to return to our flagship project and move forward with our Phase II Drill Program at Silver Strand. We have drillholes designed to test up to three times as deep as our previous phase of drilling and a series of other holes that will test the system laterally with the aim of discovering parallel chutes to the southeast of the main mine trend,” stated President & CEO Morgan Lekstrom. “We believe the potential for making additional discoveries at Silver Strand is excellent and finding new high-grade zones of gold-silver mineralization would demonstrate the large-scale potential we think is possible here.”

NISS, the Company’s drilling contractor, has begun drilling and successfully finished the first hole. Approximately 1,100 meters of drilling is currently planned with ability to expand the program depending on core observations and initial assay results. Silver Hammer continues to use the Company’s underground drilling station to deliver much better ROI per metre drilled. The Phase II Drill Program is expected to last approximately seven weeks, with assay results to follow during Q4/2022.

Qualified Person

Technical aspects of this press release have been reviewed and approved by Philip Mulholland, a Certified Professional Geologist (CPG) with the American Institute of Professional Geologists, a contractor of the Company and the designated Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects.

About Silver Hammer Mining Corp.

Silver Hammer Mining Corp. is a junior resource company advancing the flagship past-producing Silver Strand Mine in the Coeur d’Alene Mining District in Idaho, USA, as well both the Eliza Silver Project and the Silverton Silver Mine in one of the world’s most prolific mining jurisdictions in Nevada and the Lacy Gold Project in British Columbia, Canada. Silver Hammer’s primary focus is defining and developing silver deposits near past-producing mines that have not yet been adequately tested. The Company’s portfolio also provides exposure to copper and gold discoveries.

Disclaimer note: Mineralization hosted on adjacent and/or nearby properties is not necessarily indicative of mineralization hosted on the Company’s projects.

On Behalf of the Board of Silver Hammer Mining Corp.
Morgan Lekstrom, President and CEO
Corporate Office: 551 Howe Street, Vancouver, British Columbia V6C 2C2, Canada

For investor relations inquiries, contact:
Kristina Pillon, High Tide Consulting Corp.
E: investors@silverhammermining.com

For media inquiries, contact:
Adam Bello, Primoris Group Inc.
T: 416.489.0092
E: media@primorisgroup.com

Cautionary Note Regarding Forward-Looking Statements

This news release contains forward-looking statements or forward-looking information under applicable Canadian securities laws (hereinafter collectively referred to as “forward-looking statements”) concerning the Company’s plans for its properties and mineral projects, financial results, operations and other matters. Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance are not statements of fact and may be forward-looking statements. Such forward-looking statements made as of the date of this news release or as of the date of the effective date of information described in this news release, as applicable.

Further, these forward-looking statements reflect management’s current views and are based on certain expectations, estimates and assumptions which may prove to be incorrect. A number of risks and uncertainties could cause the Company’s actual results to differ materially from those expressed or implied by the forward-looking statements, including: (1) a downturn in general economic conditions in North America and internationally. (2) the inherent uncertainties and speculative nature associated with mineral exploration. (3) a decreased demand for precious metals, (4) any number of events or causes which may delay exploration and development of the property interests, such as environmental liabilities, weather, mechanical failures, safety concerns and labour problems, (5) the risk that the Company does not execute its business plan, (6) inability to finance operations and growth, (7) inability to obtain all necessary permitting and financing, and (8) other factors beyond the Company’s control. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking statements contained in this news release or in certain of the other documents on file with Canadian securities regulatory authorities, which are available on the Company’s SEDAR profile at www.sedar.com. The Company and its directors, officers and employees each disclaim any obligation to update any forward-looking statements, whether as a result of new information, future events or results or otherwise, except as required by applicable law. Accordingly, readers should not place undue reliance on forward-looking statements due to the inherent uncertainty therein. All forward-looking statements are expressly qualified in their entirety by this cautionary statement.

The CSE has neither approved nor disapproved the contents of this news release. Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the CSE) accepts responsibility for the adequacy or accuracy of this release.

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/6512acd0-9b0c-4bcb-8f8d-9425a2e84ea5

Tags #InvestingInBatteryMetals, #JuniorMining, #MauriceJackson, #ProvenAndProbable, #SilverStrandMine, Eliza Silver Project, HAMR, Morgan Lekstrom, Silver Hammer Mining, Silverton

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

Category: Energy

Collective Mining Drills 180.6 Metres Grading 2.43 g/t Gold Equivalent in the Newly Discovered Main Breccia at the Apollo Target

Granite Creek Copper Acquires Copper-Nickel-PGM Project in British Columbia, Canada

Silver Bullet Mines Corp. Updates on Washington Mine in Idaho

GoldShore Resources – New Step-Out Hole and Main Zone Increase Pending Gold Resource

Collective Mining Commences a Phase II Drill Program at the Olympus Target

Rover Metals Options Brownfields Critical Minerals Project At 60th Parallel, NT, Canada

Bravo Intercepts High-Grade Nickel/Copper Massive Sulphide Mineralization at Luanga

Silver Bullet Mines Corp. Closes Financing

Lion One Confirms High-Grade Gold Feeder Zone at Tuvatu, Fiji with TUDDH-601 Returning 54.9m of 12.22 g/t Au Including 20.10m of 23.03 g/t Au

Silver Hammer Reports on Drilling Progress at the Silver Strand Project in Idaho

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

Sign up to Stay Up to Date on News and Progress from Page