Category: Blog

Blog sub category

Lion One Reports New High-Grade Intercepts to Expand Deep Feeder Zone 500 at Tuvatu, Fiji

Post author By admin
Post date November 2, 2021

North Vancouver, British Columbia–(Newsfile Corp. – November 2, 2021) – Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) (“Lion One” or the “Company”) is pleased to announce further high-grade intercepts from two recently completed drillholes as part of ongoing deep extensional step-out drilling from the Company’s 100% owned Tuvatu gold project in Fiji.

– DEEP FEEDER ZONE 500 NOW EXTENDS OVER 300M VERTICALLY AND 150M LATERALLY
– WEIGHTED AVERAGE GRADE OF 23 G/T Au FROM ZONE 500 MINERALIZED INTERCEPTS 2.6 X HIGHER THAN AVERAGE GRADE OF RESOURCE
– ZONE 500 CONNECTS WITH BASE OF EXISTING RESOURCE AT APPROX. 470M DEPTH
– DRILLED EXTENT OF TUVATU SYSTEM INCREASED BY 53% TO APPROX. DEPTH OF 720M

Drill highlights include:

33.40 g/t Au over 3.90m from downhole depth of 629.30m from TUDDH544-W2
– including 105.0 g/t Au over 0.30m from 629.6m,
65.0 g/t Au over 0.30m from 630.2m, and
112.0 g/tAu over 0.30m from 631.1m

48.74 g/t Au over 0.6m from downhole depth of651.50m, and
33.06 g/t Au over 0.6m from downhole depth of 658.2m, from hole TUDDH544-W1

Sergio Cattalani, Lion One’s Senior Vice President Exploration, commented, “High grade mineralization in Deep Feeder Zone 500 has now been demonstrated to extend over an area approximately 150m along strike and 300m vertically with an overall calculated weighted average grade of >23 g/t Au; Zone 500 mineralisation will add significantly to the overall Au inventory of the Tuvatu orebody. Furthermore, an improved understanding of the orientation of the 500 Zone now allows us to connect this high-grade feeder to the base of the existing resource. We continue to plan additional drilling to test the lateral and vertical extents of this zone which remains open in all directions.”

Deep Feeder Zone 500

These most recent intercepts reported above are believed to be the continuation of the interpreted deep feeder structure that encountered 55.43 g/t Au over 12.70m in TUDDH500 (see July 24, 2020 News Release), 55.44 g/t Au over 2.30m in TUDDH533 (see July 26, 2021 News Release), and 24.92 g/t Au over 3.70m in TUG-135 (see September 7, 2021 News Release), among many others.

Deeper Feeder Zone 500, cont.

This important gold-bearing structure has now been intersected by multiple holes, including TUDDH500, 500W1, 500W2, TUDDH533, 533W1, TUDDH528, TUDDH517, 517W1, TUDDH514, 514W1, TUDDH544W1, TUDDH544W2, TUG135, and TUG136 (results pending; see Figures 1, 2). At 33.40 g/t Au over 3.90m, the intercept reported here from TUDDH544W2 represents one of the best overall downhole intercepts to date, for holes drilled at a high angle to the 500 Zone structure. Figure 3 shows a photo of visible gold from a portion of this intercept.

The growing number of intercepts has allowed for a remodeling of the 500 Zone structure such that the current best-fit orientation of the 500 Zone is now modelled with an azimuth of N060° and a dip of -88°, with all of the high-grade intercepts from the boreholes listed above captured by an approximately 25m wide envelope. This revised model for the 500 Zone structure connects the 500 Zone to the Tuvatu orebody at a depth of approximately -150m RSL by way of two historic drillholes (TUDDH212, previously interpreted as the base of UR2 lode; and TUG110, previously interpreted as part of the URW3 lode) which occur in the lowermost portion of the existing resource model. This portion of the orebody remains significantly under-drilled.

Based on only the few, currently reported number of intercepts, the 500 Zone as defined above has a calculated weighted average thickness of approximately 2.75m and a calculated weighted average grade of 23.31 g/t Au, or approximately 2.6X the average grade of the current Tuvatu resource it underlays. At present, it represents an approximate increase in contained Au ounces of >25% (uncategorized) over the existing resource. It is increasingly clear that the current Tuvatu resource represents only a fraction of a much larger and considerably more extensive, high-grade Au deposit for which additional drilling is warranted to further define its full extent.

Resignation of Company Director

The Company also announces the resignation of Stephen Mann from the Board of Directors. The Company thanks Mr. Mann for his service to the Company as board member since 2012 and wishes him well in his future endeavors.

Figure 1: Longitudinal section oriented at N060°, -88°E of the 500 Zone high-grade feeder structure showing block model and selected drill Intercepts. The grid is 300m, the darker yellow is current indicated resource and the lighter yellow is current inferred resource. Dots indicate modelled pierce points for existing drill intercepts defining the 500 Zone (green=recently completed; orange=previously reported; open=within current resource).

To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/2178/101660_d0a22f99342c886b_001full.jpg

Figure 2: Detail of Figure 1. The grid is 100m; intercepts are expressed as g/t Au over downhole width in meters. Dots indicate modelled pierce points for existing drill intercepts defining the 500 Zone (green=recently completed; orange=previously reported; white=within current resource).

To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/2178/101660_d0a22f99342c886b_002full.jpg

Table 1: Drilling Intervals Reported (intervals greater than 3.0 g/t Au cutoff are bolded)

Drill Hole	From (m)	To (m)	Interval (m)	Au (g/t)
TUDDH544W1 (incomplete)	643.7	644.6	0.9	2.17
incl.	643.7	644.0	0.3	4.05
	651.5	652.1	0.6	46.79
incl.	651.5	651.8	0.3	56.74
and	651.8	652.1	0.3	36.83
	658.2	658.8	0.6	33.06
incl.	658.2	658.5	0.3	5.11
and	658.5	658.8	0.3	61.0

TUDDH544W2	573.2	575.3	2.1	6.69
incl.	574.1	575.0	0.9	14.67
and	574.4	574.7	0.3	32.83
	577.1	578.3	1.2	7.45
incl.	577.1	577.4	0.3	12.69
and	577.4	577.7	0.3	5.99
and	577.7	578.0	0.3	8.57
and	578.0	578.3	0.3	2.23
	579.5	579.8	0.3	25.56
	629.3	633.2	3.90	33.40
incl.	629.3	629.6	0.3	25.0
and	629.6	629.9	0.3	105.0
and	630.2	630.5	0.3	65.0
and	630.5	630.8	0.3	19.0
and	630.8	631.1	0.3	5.67
and	631.1	631.4	0.3	112.0
and	631.4	631.7	0.3	45.0
and	632.3	632.9	0.6	3.47
and	632.9	633.2	0.3	50.0

Table 2: Survey details of diamond drill holes referenced in this release (Fiji Map Grid)

Hole No	coordinates	RL	final depth	dip	azimuth
	N	E		m		(TN)
TUDDH544W1	3920795.6	1876350.7	209.7	758.50	-65.04°	132.06°
TUDDH544W2	3920795.6	1876350.7	209.7	926.8	-65.04°	132.06°

Figure 3: Photo of a portion of uncut drill core from TUDDH544W2, showing coarse visible gold and pyrite. This 30cm sample returned 112 g/t Au from 631.1-631.4m.

To view an enhanced version of Figure 3, please visit:
https://orders.newsfilecorp.com/files/2178/101660_lionbayfigure3.jpg

Drilling and Assay Processes and Procedures

The Company is utilizing its own diamond drill rig, using PQ, HQ and ultimately NQ sized drill core rods. Drill core is logged by Company geologists and then is sawn in half and sampled by Lion One staff.

Samples are analyzed at the Company’s own geochemical laboratory in Fiji, whilst pulp duplicates of all samples with results >0.5g/t Au are re-assayed, as well as sent to ALS Global Laboratories in Australia for check assay determinations. All samples for all high-grade intercepts reported here will be sent to ALS Global Laboratories for check assays shortly. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10g/t Au are then re-analyzed by gravimetric method. Lion One’s laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples sent to ALS Townsville, Queensland, Australia are analyzed by the same methods (Au-AA26, and also Au-GRA22 where applicable). ALS also analyze for 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES. (method ME-ICP61).

Qualified Person

The scientific and technical content of this news release has been reviewed, prepared, and approved by Mr. Sergio Cattalani, P. Geo, who is a qualified person pursuant to National Instrument 43-101 – Standards of disclosure for Mineral Projects (“NI-43-101).

About Tuvatu

The Tuvatu gold deposit is located on the island of Viti Levu in the South Pacific island nation of Fiji. The mineral resource for Tuvatu as disclosed in the technical report “Tuvatu Gold Project PEA”, dated June 1, 2015, and prepared by Mining Associates Pty Ltd of Brisbane Qld, comprises 1,120,000 tonnes indicated at 8.17 g/t Au (294,000 oz. Au) and 1,300,000 tonnes inferred at 10.60 g/t Au (445,000 oz. Au) at a cut-off grade of 3 g/t Au. The technical report is available on the Lion One website at www.liononemetals.com and on the SEDAR website at www.sedar.com.

About Lion One Metals Limited

Lion One’s flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One’s CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.

On behalf of the Board of Directors of
Lion One Metals Limited
“Walter Berukoff“
Chairman and CEO

For further information
Contact Investor Relations
Toll Free (North America) Tel: 1-855-805-1250
Email: info@liononemetals.com
Website: www.liononemetals.com

Neither the TSX Venture Exchange nor its Regulation Service Provider
accepts responsibility for the adequacy or accuracy of this release.

This press release may contain statements that may be deemed to be “forward-looking statements” within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “proposed”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Limited’s current beliefs and is based on information currently available to Lion One Metals Limited and on assumptions Lion One Metals Limited believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Limited or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Limited, general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Limited has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Limited does not undertake to update any forward-looking information, except in accordance with applicable securities laws. info

Tags LIO, Lion One Metals, maurice jackson, Provenandprobable.com, Walter Berekoff

Energy Junior Mining Precious Metals Silver Hammer

Silver Hammer Mining Commerces Trading on the OTCQB and Provides Lacy Project Update

Post author By admin
Post date October 29, 2021

VANCOUVER, British Columbia, Oct. 29, 2021 (GLOBE NEWSWIRE) — Silver Hammer Mining Corp. (CSE: HAMR) (OTCQB: HAMRF) (the “Company” or “Silver Hammer”) is pleased to announce that, effective October 29, 2021, it has commenced trading on the OTCQB® under the symbol “HAMRF”. The Company has chosen to trade on this US marketplace to provide current and future US-based investors with greater access, ease of trading, home country disclosure, current financial disclosures and Real-Time Level 2 quotes on www.otcmarkets.com.

“Listing on the OTCQB venture exchange market place is an important milestone for the Company,” said Morgan Lekstrom, President and CEO of the Company. “Qualifying for OTCQB® is a natural step for the Company towards broadening exposure of our exploration activities in the U.S. It also demonstrates our commitment to increasing our investor base while providing our current and future U.S. investors convenient access to the same ease of trading, timely news and information enjoyed by investors in Canada.”

The Company appointed B. Riley to provide guidance with respect to its eligibility to meet the requirements of the OTCQB and to advise the Company on its responsibilities for complying with its U.S. disclosure obligations under the Securities Act of 1934 and Rule 12g3-2 promulgated thereunder in connection with the OTCQB listing and the OTCQB standards for international companies.

Lacy Project Update

Silver Hammer has filed an assessment report on the Lacy Project with the BC provincial government. The project comprises 590 hectares of mineral tenures in the Nanaimo and Alberni Mining Divisions of B.C. The initial evaluation of the project has produced encouraging results, including gold-silver surface mineralization in stockworks and quartz veins. Management intends to conduct a more detailed program including further geophysics over the next 6-12 months to identify possible drill targets.

About Silver Hammer Mining Corp.

Silver Hammer Mining Corp. is a junior resource company advancing the past-producing Silver Strand Mine in the Coeur d’Alene Mining District in Idaho, USA, both the Eliza Silver Project and the Silverton Silver Mine in one of the world’s most prolific mining jurisdictions in Nevada and the Lacy Gold Project in British Columbia, Canada. The Company has commenced an initial drill program at Silver Strand that will test for silver and gold mineralization immediately below the mine’s lowest level extending only 90 metres below surface. Silver Hammer strives to become a multimine silver producer and will focus near-term exploration and drilling plans at the Company’s Idaho and Nevada silver-gold assets.

*Mineralization hosted on adjacent and/or nearby properties is not necessarily indicative of mineralization hosted on the Company’s property.

On Behalf of the Board of Silver Hammer Mining Corp.

Morgan Lekstrom, President and CEO

Corporate Office: 551 Howe Street, Vancouver, British Columbia V6C 2C2, Canada

Contact: Kristina Pillon, President, High Tide Consulting Corp.

604.908.1695 / investors@silverhammermining.com

The CSE does not accept responsibility for the adequacy or accuracy of this release. The Canadian Securities Exchange has neither approved nor disapproved the contents of this press release.

Tags HAMR, Morgan Lekstrom, Silver Hammer Mining, Silver Strand Mine

Base Metals Energy Granite Creek Copper Junior Mining

Granite Creek Copper Reports Final Results from Phase 1 of 2021 Drill Program, Including 23.30 Meters of 2.27 % Copper Equivalent, at the Carmacks Copper-Gold-Silver Project in Yukon, Canada

Post author By admin
Post date October 28, 2021

VANCOUVER, BC / ACCESSWIRE / October 28, 2021 / Granite Creek Copper Ltd. (TSX.V:GCX | OTCQB:GCXXF) (“Granite Creek” or the “Company“) is pleased to announce the third and final tranche of assay results from Phase 1 of the Company’s three-phase 2021 drill program at the 100%-owned Carmacks project.

The Phase 1 campaign focused on expansion and upgrade of resources in zones 1, 2000S, and 13 by testing the sulfide potential of these priority areas. In addition to the Phase 1 program, the Company also completed Phase 2 RC drilling at early-stage targets, and a Phase 3 diamond drill program to follow up on the success of Phase 1. All activity has been completed at site for the 2021 field season with assays for Phases 2 and 3 pending.

Granite Creek President & CEO, Tim Johnson, commented, “We are extremely pleased with the results of our 2021 exploration program which achieved many of our objectives and exceeded our expectations in several important respects. We expanded sulfide mineralization in three of the main zones at Carmacks which will be reflected in an updated NI 43-101 resource estimate followed by a new mine plan which is being developed to incorporate both oxide and sulfide material. We anticipate the sulfide resources could make a significant difference to the mine life and economics of the Carmacks deposit and we look forward to further defining that potential.”

Highlights

In Zone 1, diamond drill hole CRM21-019 intersected 67.35m of 1.23% Copper Equivalent (“CuEq”) mineralization including 23.30m of 2.27 CuEq.
In Zone 1, diamond drill hole CRM21-013 intersected 67.90m of 0.90% CuEq including 22.88m of 1.14% CuEq and 12.91m of 1.73% CuEq.
In Zone 13, diamond drill hole CRM21-021 intersected 96.85m of 0.84% CuEq including 35.85m of 1.04 CuEq and 21.35m of 1.21 CuEq.
Granite Creek believes these intercepts, plus others listed in the table below, have the potential to increase the grade and confidence of the resource model in Zone 1 and increase the grade and total size of Zones 2000S and 13.
Updated resource model being developed.

Table 1 – Highlights from of 2021 Phase 1 Diamond Drill Assays at the Carmacks Project

Drillhole	From(m)	To(m)	Length*(m)	Cu(%)	Mo(%)	Au(g/t)	Ag(g/t)	CuEq^ (%)**
CRM21-012	400.65	415.75	15.10	0.34	0.006	0.11	2.13	0.47	Zone 1ThisRelease
Including	405.85	411.20	5.35	0.55	0.016	0.15	3.01	0.75
CRM21-013	311.00	378.90	67.90	0.73	0.005	0.18	2.69	0.90
Including	324.75	343.63	22.88	0.92	0.006	0.23	3.76	1.14
and including	355.09	368.00	12.91	1.39	0.006	0.37	5.29	1.73
CRM21-014	355.70	423.45	67.75	0.93	0.009	0.26	5.16	1.20
Including	398.00	423.45	24.45	1.53	0.009	0.41	6.21	1.91
CRM21-017	317.42	363.20	45.78	0.42	0.001	0.15	2.41	0.55
Including	323.50	335.85	12.35	0.67	0.002	0.28	3.90	0.92
CRM21-019	277.95	345.30	67.35	0.93	0.011	0.31	4.23	1.23
Including	322.00	345.30	23.30	1.7	0.016	0.57	7.51	2.27
CRM21-004	323.50	367.00	43.50	1.12	0.028	0.20	3.41	1.40	Zone 1PreviousRelease
Including	338.50	367.00	28.50	1.57	0.042	0.29	4.53	1.96
and including	352.00†	367.00	15.00	1.80	0.066	0.33	4.81	2.31
CRM21-007	222.52	226.60	4.08	0.91	0.006	0.19	6.32	1.13
CRM21-010	450.00	513.40	63.40	0.27	0.003	0.08	1.31	0.35
Including	450.00	482.25	32.25	0.30	0.004	0.08	1.41	0.39
Including	488.90	513.40	24.50	0.30	0.003	0.09	1.47	0.39
CRM21-018	92.40	110.40	18.00	0.91	0.008	0.17	6.79	1.12	Zone 2000SThisRelease
and	158.80	170.00	11.20	0.72	0.013	0.14	4.27	0.91
and	233.60	249.00	15.40	0.39	0.024	0.09	2.09	0.56
and	263	298.90	35.90	0.35	0.008	0.10	2.62	0.48
including	287.00	298.90	11.90	0.67	0.017	0.19	3.53	0.90
CRM21-003	146.35†	214.50	68.15	0.59	0.028	0.14	3.69	0.83	Zone 2000SPreviousRelease
Including	161.40	179.80	18.04	0.81	0.033	0.21	4.80	1.13
CRM21-005	137.05	179.80	43.24	0.74	0.047	0.16	3.82	1.06
Including	142.05	158.40	16.35	1.20	0.036	0.26	6.11	1.58
CRM21-006	194.40	278.20	83.80	0.64	0.012	0.13	3.23	0.81
Including	229.20	278.20	49.00	0.87	0.018	0.17	3.88	1.10
Including	248.76	266.20	17.44	1.21	0.033	0.22	5.11	1.53
CRM21-008	195.80	228.40	32.60	0.80	0.019	0.17	3.88	1.02
Including	201.55	215.55	14.00	1.10	0.023	0.24	4.86	1.40
CRM21-009	190.50	243.85	53.35	0.59	0.012	0.14	2.71	0.75
Including	191.30	201.70	10.40	0.87	0.004	0.25	3.70	1.09
and including	209.00	225.95	16.95	0.62	0.009	0.13	2.76	0.77
and including	229.90	235.25	5.35	1.21	0.064	0.28	4.88	1.68
CRM21-011	223.98	329.50	105.52	0.96	0.013	0.18	4.06	1.18
Including	223.98	245.20	21.22	2.17	0.010	0.36	9.13	2.56
and including	260.32	260.82	0.50	18.97	0.008	0.46	38.3	19.72
CRM21-015	36.69	49.38	12.69	0.23	0.003	0.04	0.96	0.27	Zone 13 ThisRelease
CRM21-016	91.30	238.50	147.20	0.38	0.025	0.10	2.28	0.56
CRM21-021	132.15	229.00	96.85	0.62	0.014	0.20	3.04	0.84
Including	132.15	168.00	35.85	0.82	0.013	0.20	3.80	1.04
and including	207.65	229.00	21.35	0.80	0.021`	0.43	3.51	1.21

^**Copper equivalent (Cu Eq) values assume Cu $3.35/lb, Au $1600/oz, Ag $24/oz, Mo $12/lb and 100% recovery. *Weighted average intercepts shown. Estimated true widths vary but, based on geological interpretation of cross-sections, are estimated to be typically 60-70% of the intersected widths.

† Part of zone has poor recovery

Figure 1 – Carmacks Copper Project Plan View

Zone 1

Eight holes were drilled in Zone 1 with the objective of increasing confidence in the inferred portion of the sulfide resource of this zone as well as evaluating the down-dip continuation of the inferred resource. Drilling was successful in achieving its objectives of delineating the depth extent of mineralization, expanding the mineralization below the current resource model, and confirming the grade and anticipated thickness in the inferred portion of the sulfide resource in this zone. Of the total reported meterage with significant mineralization, 67% returned mineralized intercepts grading greater than those reported in the inferred category of the resource estimate completed in 2017. While only preliminary, the Company feels that these intercepts have the potential to significantly increase the grade and the confidence in this area of the resource model.

While the Preliminary Economic Assessment (“PEA”) published in 2017^(1,2) looked only at the oxide material in Zones 1,4, and 7, work being conducted by Sedgman and Mining Plus (see news release dated May 18, 2021) is looking at various scenarios to process the sulfide portion of Zone 1, and other sulfide zones of the deposit, to build a basis for an updated PEA that would include both oxide and sulfide ore.

Zone 2000S

Zone 2000S has the potential to add tonnage in the sulfide domain of resource category and in doing so could add significant value to an updated PEA that included sulfide resources. During Phase 1, six diamond drillholes were drilled in this zone to evaluate the continuation of bornite-chalcopyrite mineralization down dip, and two additional holes were drilled during Phase 2 with assays still pending. Drill hole CRM21-011, along with all other drillholes from the 2021 program (see release dated August 22, 2021) extended known mineralization in the zone from 30m to 100m below the current block model. CRM21-018, a technical hole drilled subparallel to the mineralization to evaluate the geological concept of a southern W-E striking fault, was successful in locating the fault and extends mineralization to depth beneath the current resource model

Zone 13

Three diamond drill holes were completed at Zone 13 in Phase 1, and an additional two holes were completed in Phase 3 with the intent of evaluating the northern continuity of sulfide mineralization, and infilling an open area of the block model. Building on success from the company’s inaugural drill program in 2020 which included 127 metres of continuous copper mineralization in drillhole CRM20-001, grading 0.85% CuEq and including 28.65m of 1.74% CuEq and 19.2m of 1.19% CuEq (see news release dated February 11,2021), all five diamond drill holes were successful in extending and infilling mineralization from Zone 13 in the Carmacks deposit including CRM21-021 which intercepted 96.85m grading 0.84% CuEq including 35.85m of 1.04% CuEq and 21.35m of 1.21% CuEq. Drill hole CRM21-020 drilled from the same pad as CRM21-021 deviated from planed direction and was not completed.

COVID-19 Protocols

Granite Creek has worked closely with the Yukon government to develop a COVID-19 safety plan that enables the Company to implement an effective work plan while maintaining the highest degree of safety of our workers and surrounding communities. The Company strictly adheres to mandates put in place by health authorities at the Federal and Territorial government level and hold the health and safety of our workers, and the citizens of the communities in which work in the highest regard.

[1] JDS Energy and Mining. Feb 9, 2017. NI 43-101 Preliminary Economic Assessment Technical Report on the Carmacks Project, Yukon, Canada. Contained metal based on 23.76 million tonnes of NI 43-101 compliant resources in the Measured and Indicated categories grading 0.85% Cu, 0.31 g/t Au, 3.14 g/t Ag.

[2] Arseneau Consulting Services, 2016 Independent Technical Report on the Carmacks Copper Project, Yukon, Canada.

About Granite Creek Copper

Granite Creek, a member of the Metallic Group of Companies, is a Canadian exploration company focused on the 176 square kilometer Carmacks project in the Minto copper district of Canada’s Yukon Territory. The project is on trend with the high-grade Minto copper-gold mine, operated by Minto Explorations Ltd, to the north and features excellent access to infrastructure with the nearby paved Yukon Highway 2, along with grid power within 12 km. More information about Granite Creek Copper can be viewed on the Company’s website at www.gcxcopper.com.

FOR FURTHER INFORMATION PLEASE CONTACT:

Timothy Johnson, President & CEO
Telephone: 1 (604) 235-1982
Toll Free: 1 (888) 361-3494
E-mail: info@gcxcopper.com
Website: www.gcxcopper.com

Qualified Person

Ms. Debbie James, P.Geo., a qualified person for the purposes of National Instrument 43-101, has reviewed and approved the technical disclosure contained in this news release.

Quality Control and Quality Assurance

Quality assurance and quality control procedures include the systematic insertion of duplicate, blank and standard samples, making up 12% of the sample stream. Drill core samples were sawn in half, labelled, placed in sealed bags and shipped directly to the Bureau Veritas preparation laboratory in Whitehorse. All geochemical analyses were performed by Bureau Veritas in Vancouver. Copper and silver analysis was performed by four-acid digestion with an ICP-ES finish. Non-sulphide copper was determined through a sulphuric acid leach with an AAS finish. Gold was analyzed by igniting a 15 g sample followed by an aqua regia digestion with an ICP-MS finish.

Forward-Looking Statements

This news release includes certain statements that may be deemed “forward-looking statements”. All statements in this release, other than statements of historical facts including, without limitation, statements regarding potential mineralization, historic production, estimation of mineral resources, the realization of mineral resource estimates, interpretation of prior exploration and potential exploration results, the timing and success of exploration activities generally, the timing and results of future resource estimates, permitting time lines, metal prices and currency exchange rates, availability of capital, government regulation of exploration operations, environmental risks, reclamation, title, and future plans and objectives of the company are forward-looking statements that involve various risks and uncertainties. Although Granite Creek Copper believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the companies with securities regulators. Readers are cautioned that mineral resources that are not mineral reserves do not have demonstrated economic viability. Mineral exploration and development of mines is an inherently risky business. Accordingly, the actual events may differ materially from those projected in the forward-looking statements. For more information on Granite Creek Copper and the risks and challenges of their businesses, investors should review their annual filings that are available at www.sedar.com.

Tags #GraniteCreekCopper, GCX, Granite Creek Copper, maurice jackson, Metallic Group of Companies, proven and probable, Tim Johnson

Base Metals Breaking Energy Junior Mining Nevada Copper

Copper Is Heading For New Highs- A Bullish Trend In Nevada Copper (NEVDF)

Post author By admin
Post date October 22, 2021
Sticky post

Copper corrected from the May record high and made higher lows
Four reasons the copper bull will take the price to new highs
Impressive price action in the face of Chinese selling
Nevada Copper- Three reasons why NEVDF is could outperform percentage gains in the nonferrous metal
Bull markets rarely move in straight lines- The next leg for the copper bull has begun

When Goldman Sachs called copper “the new oil” in April 2021, the price was on its way to a new record high at nearly $4.90 on the nearby COMEX futures contract. The world’s most active and liquid copper market on the London Metals Exchange reached a peak at over $10,700 per ton in May. Copper blew through the 2011 $4.6495 previous all-time peak as a hot knife goes through butter.

Even the most aggressive bull markets rarely move in straight lines. Corrections can be brutal when prices accelerate on the upside, reaching unsustainable short-term peaks.

Copper ran out of upside steam before touching the $4.90 per pound level on futures and $10,750 per ton level on LME forwards. The price fell just below the $4 level in August, three months after reaching the high. Copper was still “the new oil” when the price dropped, and the world’s leading copper consumer was hoping it would continue to fall. China has done everything to push copper’s price lower, but the red metal has exhibited remarkable resilience.

Meanwhile, Nevada Copper Corporation (NEVDF) has been working day and night to ramp up production and transform its balance sheet. The market has rewarded the company as the share price has been steadily increasing since the beginning of October.

Mining companies provide investors with leveraged exposure to a commodity as they tend to outperform the price action on the upside and underperform during corrections. Junior mining companies can magnify the leverage. Copper’s recent explosive move suggests that new highs are on the horizon. NEVDF has the potential to do even better on a percentage basis as the company ramps up its production of the red industrial metal.

Copper corrected from the May record high and made higher lows Copper futures ran out of steam at just below the $4.90 level, with the LME forwards moving the $10,747.50 per ton level for the first time. The May highs led to a substantial correction that briefly took COMEX futures below $4 per pound in August.

Source: CQG The chart shows the decline from $4.8985 in May to a low of $3.9615 in mid-August, a 19.1% correction. COMEX futures made higher lows of $4.0220, $4.0545, and $4.1140 in late September and early October before blasting off on the upside to over the $4.70 level as of October 15.

Source: Barchart

The chart illustrates the decline from $10,747.50 on May 10 to a low of $ 8,740 per ton on August 19 as copper forwards corrected by 18.7%. Copper then made higher lows at $8,810 on September 21 and $8,876.50 on October 1 before exploding higher to the $10,281 level on October 15.

Four reasons the copper bull will take the price to new highs

The four leading factors supporting a continuation of new and higher highs in the copper market are:

Rising inflation– CPI rose by 5.4% in September, once again exceeding expectations. While the Fed will likely begin tapering quantitative easing, tapering is not tightening. Moreover, fiscal stimulus continues as the multi-trillion budget will pump more inflationary stimulus into the economy.
Building demand– The infrastructure rebuilding package in the US will increase copper requirements for construction projects to rebuild the crumbling roads, bridges, tunnels, airports, schools, and government buildings over the coming years. Moreover, China’s copper requirements will continue to increase as the world’s most populous country builds infrastructure.
Decarbonization– Addressing climate change boosts copper demand. As Goldman Sachs said in April, decarbonization does not occur without copper, making the metal “the new oil.” Copper requirements for EVs, wind turbines, and other clean energy projects is a multi-decade affair for the red metal.
Supply shortages– Copper mining companies are scrambling to find new supply sources. Production can’t keep pace with demand- It takes eight to ten years to bring new copper mining projects on stream. BHP, a leading global mining company, is in talks with Ivanhoe Mines for participation in the Western Foreland exploration area in the politically dicey Democratic Republic of the Congo.

Bull markets tend to experience severe selloffs. China has attempted to cool off the bullish copper and other nonferrous metals markets. The world’s leading copper consumer has the most to lose from runaway prices on the upside.

Impressive price action in the face of Chinese selling

On September 1, China auctioned 150,000 tons of copper, aluminum, and zinc from strategic stockpiles, which was the third auction sale since early July, attempting to temper the market’s bullish price action. The market had expected the sales. Copper rallied to the highest level since early August on September 13, with many other base metals following the red metal higher. The price then retreated, but copper made a higher low on September 21. The Chinese auction to cool off the rally put 80,000 tons of copper, 210,00 tons of aluminum, and 130,000 tons of zinc into the market since early July. Since the day of the first auction, copper, aluminum, and zinc prices all posted gains. Imagine where prices might be if China did not sell from its strategic stocks.

In early October, China auctioned the fourth round of base metals, lifting the total sales to 570,000 metric tons. Copper and all the base metals posted explosive gains after the latest auction. China is selling copper, aluminum, and zinc from its strategic stockpiles. The attempt to stem price appreciation makes the Chinese a buyer of the metals on price weakness to replace its stocks. However, the auctions have not had the desired impact on price. The price action has been more than impressive in the face of the sales.

While BHP looks towards the DRC and other regions for new copper supplies, Nevada Copper is making significant headway on its production project in a highly stable political and economic environment in the United States. Moreover, Nevada is a state that continues to encourage mining activity and is rich in red metal reserves.

Nevada Copper- Three reasons why NEVDF has the potential to outperform percentage gains in the nonferrous metal

Nevada Copper (NEVDF) has made great strides over the past weeks and months. A successful junior mining company is positioned best to profit during a bull market in the commodity it extracts from the earth’s crust. Three factors support the price of NEVDF shares as copper has taken off on the upside again:

Factor one: Turing the corner on operations in Q3- On October 6, NEVDF provided an update on operational performance at the company’s underground mine at its Pumpkin Hollow project, noting:

Copper in concentrate produced during September increased by 265% compared to August, driven by higher stope production. Approximately 30,386 tons of ore processing yielded 682 tons of copper concentrate at an average grade of 22%, reflecting 150 tons of copper output.
Stoping is the process of extracting the desired ore or mineral from an underground mine, leaving open space called a stope. Stoping at Pumpkin Hollow significantly accelerated since mid-August, with the second and third stope panels fully mined and a fourth stope panel currently being mined. Further stopes are planned for October and November, and the high-grade Sugar Cube zone to be mined during the final months of 2021.
NEVDF experienced the highest monthly development footage achieved since April 2021 in September, with a 12% increase over August. Approximately 750 lateral equivalent feet were advanced in September.

Outgoing Interim CEO Mike Brown said, “I am very pleased to see the improved trajectory in our production ramp-up and a recovery in productivities. The increased ore production was a key objective for September, and together with the improving productivities on-site, along with the ongoing management strengthening, provide further confidence in the mine ramp-up.”

Randy Buffington, a veteran mining executive with previous management experience at Barrick, Placer Dome, and Cominco, is taking over as President and CEO at Nevada Copper.

Factor two: On October 12, NEVDF announced it had agreed with its senior project lender and concluded a non-binding term sheet with its largest shareholder to provide additional financing and a significant deferral and extension of its debt facilities. The move offers Nevada Copper greater balance sheet flexibility and support for the ramp-up of its underground mining operations and advancement of its open-pit project and broader property exploration targets. The highlights of the more flexible financing arrangement include:

Two-year deferral of first loan repayments scheduled to begin in July 2025.
Extension of loan amortization with the final maturity pushed to July 2029.
Deferral of the formal long stop date for the project as the completion test was deferred to June 2023.
All outstanding shareholder loans were consolidated under an amended existing shareholder credit facility.
A two-year extension to maturity data until 2026 with no scheduled payments before final maturity.
An increase of $41 million in additional liquidity under the amended credit facility.

Randy Buffington, NEVDF’s new CEO, said, “These combined balance sheet improvements provide significant additional runway for the Company as we move forward to complete the ramp-up of our underground operations. The ongoing support of two of our major stakeholders provides further validation of the significant inherent value of our copper operations in Nevada and allows us to continue to pursue the growth potential embedded within our asset base.”

Factor three: NEVDF’s value proposition is compelling when compared to peers. The chart shows NEVDF’s market cap versus its enterprise value compared to other diversified metals and mining companies with similar market caps:

Source: Seeking Alpha

As the chart highlights, the enterprise value is over 2.2 times the current $173.53 million market cap, leading to plenty of upside room for NEVDF shares. There is plenty of room for growth as the enterprise value will rise with output from the underground and open-pit mining operations over the coming months and years. According to data from Seeking Alpha, at 97 cents per share on October 15, NEVDF had a $173.53 million market cap. The average daily volume in the past 15 trading days from all exchanges stood at just over 2,500,000 shares.

Source: Barchart

The chart shows the rise from 38.78 cents on October 1 to a high of 99.2 cents per share on October 14. NEVDF shares closed not far from the high at 96.56 cents on Friday, October 15.

The trend in copper and NEVDF is bullish, and the trend is always your best friend in markets.

Bull markets rarely move in straight lines- The next leg for the copper bull has begun

Bull markets can be bucking broncos as corrections are often downdrafts in prices. Copper’s decline from nearly $4.90 to below $4 and recovery to over $4.70 on October 15 is a bullish sign for the red metal.

Copper’s strength, along with the other base metals in the face of Chinese stockpiling selling, has been more than impressive and is a testament to the bullish factors that are likely to push the price higher. Goldman Sachs expects LME copper forwards to reach the $15,000 per ton level by 2025, putting COMEX futures over $6.80 per pound. Other analysts see the price rising to as high as $20,000 per ton as decarbonization will keep demand outpacing supplies.

Bull markets often take prices far higher than analysts believe possible before they peak. As the world searches for more copper to meet the rising demand, Nevada Copper’s mines are in the most economically and politically stable region of the world. NEVDF shares may have just begun to rally as the price threatens to move over the $1 per share level.

Tags NCU, nevada copper

Base Metals Breaking Energy Junior Mining Metallic Minerals Precious Metals Stillwater Critical Minerals Uncategorized

Group Ten Metals Announces Inaugural NI 43-101 Mineral Resource Estimate for the Stillwater West PGE-Ni-Cu-Co + Au Project, Montana, USA

Post author By admin
Post date October 21, 2021

VANCOUVER, BC / ACCESSWIRE / October 21, 2021 / Group Ten Metals Inc. (TSX.V:PGE | OTCQB:PGEZF; FSE:5D32) (the “Company” or “Group Ten”) is pleased to report the first independent National Instrument 43-101 (“NI 43-101”) mineral resource estimate (the “2021 Resource”) for its 100%-owned Stillwater West platinum group element, nickel, copper, cobalt, and gold (“PGE-Ni-Cu-Co + Au”) project in Montana, USA. The study was completed by SGS Geological Services (“SGS”).

The Company will host a live webcast on Thursday October 28^th at 9am Pacific time (12pm Eastern) to discuss the 2021 Resource, recent drill campaign, and plans for the Stillwater West project. To register, click here.

Highlights

Inferred mineral resources total 2.4 million ounces palladium, platinum, rhodium, and gold (“4E”) plus 1.1 billion pounds of nickel, copper and cobalt in a constrained model totaling 157 million tonnes at an average grade of 0.45% total nickel equivalent (“NiEq”) (equal to 1.20 g/t palladium equivalent, or “PdEq”) using a 0.20% NiEq cut-off grade. See detailed breakdown in Tables 1 and 2 below.
The 2021 Resource incorporates five deposits of sulphide mineralization that cover 8.7 kilometers of strike length within the central area of the project. The strong correlation that is demonstrated between resource areas and untested high-level geophysical targets (Figure 1), and metal-in-soil anomalies, provides a strong basis for expansion of the resource with 2021 drill results, and future drill campaigns (Figures 2 to 6).
Mineralization, consisting of thick horizons of nickel and copper sulphide that are enriched in palladium, platinum, rhodium, gold and cobalt, is consistent with Group Ten’s “Platreef-style” geological model that is based on known parallels with South Africa’s Bushveld Igneous Complex.
Deposits in the 2021 Resource are defined by 83 drill holes from a total of 216 holes drilled at Stillwater West prior to 2021, including all holes from Group Ten’s 2019 and 2020 campaigns. A number of the remaining drill holes provide early confirmation of target mineralization in otherwise untested anomalies across much of the 32-kilometer project, accelerating future exploration programs and demonstrating significant expansion potential outside of the known deposit areas.
Assays are pending from the 14-hole 2021 drill campaign, which focused on expansion of three of the five deposits by completing step-out holes designed to build onto the 2021 Resource.
Rhodium totaling 61,000 ounces was modeled at three of the five target areas, where sufficient data was available. At recent spot prices, this endowment is equivalent to over 400,000 ounces palladium and over 750,000 ounces platinum. The Company believes rhodium results are understated due to the lack of historic assay data and is working to fully include rhodium in future mineral resource updates.

The 2021 Resource estimate will be incorporated into an NI43-101-compliant technical report for the Stillwater West project to be filed within 45 days.

Michael Rowley, Group Ten’s President and CEO states, “We are extremely pleased with the results of our inaugural resource estimate that provides a robust debut of high-demand battery and platinum group metals in a top US mining district. This is a major milestone in the advancement of both the project and Group Ten Metals. Mineralization in the five deposits shows excellent continuity and grade across large areas, with strong geophysical and geochemical signatures that remain open in all directions demonstrating excellent potential for expansion in subsequent drill campaigns. In this regard, we look forward to reporting results from our 2021 campaign, our biggest yet, which we believe met the objective of increasing the 2021 Resource. More than ever we see extraordinary potential for Stillwater West to become a large-scale and strategically significant US-based source of battery metals to meet growing electrification needs while also supplying PGEs for catalytic convertors and increasing fuel cell demand.”

TABLE 1 – Grade and Contained Metal by Deposit at a 0.20% NiEq Cut-Off Grade (Equals 0.53 g/t PdEq) – Stillwater West Inferred Mineral Resource Estimate (Base Case)

CIM (2014) definitions were followed for Mineral Resources Reporting. The constrained Mineral Resources are reported at a base case cut-off grade of 0.20% NiEq. Cut-off grades and metal equivalents are based on metal prices of $7.00/lb Ni, $3.50/lb Cu, $20.00/lb Co, $900/oz Pt, $1,800/oz Pd and $1,600/oz Au, with assumed metal recoveries of 80% for Ni, 85% for copper, 80% for Co, Pt, Pd and Au, a mining cost of US$2.20/t rock, and processing and G&A cost of US$12.75/t mineralized material. Rhodium modeled but not included in equivalency calculations. All figures are rounded to reflect the relative accuracy of the estimate.

The current Mineral Resources are not Mineral Reserves as they do not have demonstrated economic viability. The quantity and grade of reported Inferred Resources in this Mineral Resource Estimate are uncertain in nature and there has been insufficient exploration to define these Inferred Resources as Indicated or Measured. However, based on the current knowledge of the deposits, it is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration.

TABLE 2 – Grade and Contained Metal by Deposit at a Higher Grade 0.35% NiEq Cut-Off (Equals 0.93 g/t PdEq)

FIGURE 1 – 2021 Stillwater West Mineral Resource Estimate Over 3D Model of Induced Polarization Survey Results

Sensitivity Analysis

A sensitivity analysis is provided in Table 3 below which demonstrates the variation in grade and tonnage in the deposit at various cut-off grades. Mineralization shows exceptional continuity, enabling models at higher-cut-off grades including inferred mineral resources of 97 million tonnes of 0.55% NiEq (equal to 1.47 g/t PdEq) containing 1.8 million ounces palladium, platinum, rhodium, and gold (“4E”) with 857 million pounds of nickel, copper and cobalt (see Table 2, above).

TABLE 3 – Grade and Contained Metal Sensitivity at Various NiEq Cut-off Grades

Constrained Mineral Resources are reported at a base case cut-off grade of 0.20% NiEq. Values in the table reported above and below the cut-off grades should not be misconstrued with a Mineral Resource Statement. The values are only presented to show the sensitivity of the block model estimates to the selection of cut-off grade. All figures are rounded to reflect the relative accuracy of the estimate. Composites have been capped where appropriate.

2021 Exploration Update

Work in 2021 focused largely on diamond core drilling within the area of the 2021 Resource and an Induced Polarization “IP” geophysical survey on the west side of the core project area, including the Pine target.

Phase I of planned expansion drilling has now been completed. 14 holes totaling 5,138 meters were drilled in a two-rig program that tested priority targets at Chrome Mountain (Hybrid and DR deposit areas), and at Iron Mountain at the CZ (formerly Camp) and HGR deposit areas. Holes were prioritized to step out from known mineralization with the primary objective of expanding and upgrading the 2021 Resource estimate in 2022. Assays are pending, however, on a visual basis the predictive geologic model developed by Group Ten Metals is effectively targeting expansion of known horizons of sulphide mineralization, including high-grade intervals identified in the 2019 and 2020 drill campaigns, and identifying numerous untested targets at Stillwater West. Drill core is in various stages of processing with first results expected over the coming weeks and continuing over the coming months. Expansion drilling is expected to resume in Q2 2022 upon review and integration of 2021 results.

The 2021 portion of the expansion IP survey is also complete, with approximately 25 line-kilometers focused on the Chrome Mountain and high-grade Pine target areas at the west side of the highly successful 2020 survey. Very high-level anomalies in untested areas were identified in preliminary results that will be presented in a coming news release as final information becomes available. The second phase of the expanded IP survey is expected to resume in 2022 in the central and eastern portions of the 2020 survey grid.

Rhodium

Rhodium has been identified at potentially significant co-product grades of 0.03 to 0.10 g/t Rh in drill results in four of the five deposit areas at Stillwater West, with shorter intervals ranging up to 0.50 g/t Rh. The lack of historic rhodium assay data has prevented assessment of the rhodium content at the Central and Crescent deposits and in some parts of the other deposits. For this reason, the Company believes rhodium levels are currently understated at Stillwater West and will continue to include complete rhodium assays in future campaigns with the objective of fully integrating rhodium in future resource updates.

Rhodium is a rare platinum group element that is primarily used as a specialized catalyst alongside platinum and palladium in automotive catalytic converters. It is mined solely as a co-product at grades that are often below 0.1 g/t. South Africa dominates global production, and there is very little mine supply in North America. Sibanye-Stillwater, adjacent to Group Ten’s Stillwater West project, is the primary US producer.

Supply constraints for rhodium have supported elevated prices since 2017. At recent values, rhodium trades at more than 12 times the value of platinum on a spot price basis at over USD$13,000 per ounce, meaning 0.1 g/t Rh equates to approximately 1.2 g/t platinum equivalent.

Metallurgy

Preliminary metallurgical assessments by Group Ten Metals returned strong nickel tenor in sulphides drilled by the Company in 2020. In addition, favorable historic bench-scale metallurgical results completed by AMAX in the 1970s at the Iron Mountain target area demonstrate the potential for effective nickel and copper sulphide flotation and PGE recovery. Sample collection for more detailed metallurgical testing is on-going as part of the expanding development of Stillwater West, with a view to including full metallurgical assessment in future studies.

Carbon Capture at Stillwater West

All five deposits in the 2021 Resource contain desirable nickel sulphide mineralization that has been shown to require a much lower environmental footprint in subsequent processing to nickel metal or nickel sulphate in comparison to the laterite nickel ores that dominate global production. As part of Group Ten’s commitment to global sustainability initiatives, the Company is also examining the potential for large-scale carbon sequestration with the objective of further reducing and possibly eliminating the carbon footprint of a potential mining operation at Stillwater West.

Preliminary results demonstrate the presence of certain minerals that are known to have high capacity to bind carbon dioxide by a natural process known as mineral carbonation. As announced in a news release on September 23, 2021, the Company has entered a second phase of research with Dr. Greg Dipple and his team at the University of British Columbia, Canada, to assess the capacity of rock samples from Stillwater West to bind carbon dioxide for permanent disposal as part of a potential mining operation.

In addition to being strongly aligned with Group Ten’s Environmental, Social and Governance guidelines and principles, the incorporation of carbon uptake may bring financial benefits via initiatives such as the 45Q Tax Credit for Carbon Oxide Sequestration that is now in place in the US.

Qualified Person

The Stillwater West PGE-Ni-Cu-Co + Au project 2021 Resource estimate was prepared by Allan Armitage, P.Geo., of SGS Geological Services, an independent Qualified Person, in accordance with the guidelines of the Canadian Securities Administrators’ National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”) with an effective date of October 7, 2021. Armitage conducted a site visit to the property on August 9 and 10, 2021

Estimation Methodology and Parameters

Completion of the 2021 Resource involved the assessment of a drill hole database, which included all data for surface drilling completed through the fall of 2020, as well as 3D mineral resource models, and available written reports. SGS used 83 holes and 18,386 meters of drill data to delineate five deposits in the 2021 Resource estimate, from a total database of 216 drill holes and 32,465 meters of core data compiled by the Company. All holes from Group Ten’s 2019 and 2020 drill campaigns were included. No assay data has been received to date from the 2021 drill program.

Inverse Distance squared restricted to mineralized domains were used to Interpolate grades for the main elements of interest including Ni (ppm), Cu (ppm), Co (ppm), Pt (g/t), Pd (g/t) and Au (g/t), as well as NiEq (%), NiEq_R (%), Rh (ppb), Cr (ppm), and S (%) into block models. Composites of 1 meter have been capped where appropriate. Fixed specific gravity values of 2.90 – 3.10 g/cm³ (depending on deposit) were used to estimate the 2021 Resource tonnage from block model volumes. Waste in all areas was given a fixed density of 2.9 g/cm³.

The constrained 2021 Resource grade blocks were quantified above the base case cut-off grade. At this base case cut-off grade the deposits show excellent geologic and grade continuity. The project is at an early stage of exploration and all deposits are open along strike and down dip. The cut-off grades should be re-evaluated in light of future prevailing market conditions (metal prices, exchange rates, mining costs etc.).

The constrained 2021 Resources are presented undiluted and in situ (no minimum thickness), constrained by continuous 3D wireframe models, and are considered to have reasonable prospects for eventual economic extraction. Based on a review of the project location, size, geometry, continuity of mineralization and proximity to surface of the deposits, and spatial distribution of the five main deposits of interest (all within a 8.7 kilometer strike length), it is envisioned that the deposits may be mined by open pit or bulk tonnage underground methods. The results from the pit optimization are used solely for the purpose of testing the “reasonable prospects for economic extraction” by open pit mining methods and do not represent an attempt to estimate mineral reserves. There are no mineral reserves on the project. The results are used as a guide to assist in the preparation of a Mineral Resource statement and to select an appropriate resource reporting cut-off grade. Pit optimization does not represent an economic study. Future engineering studies will be needed to develop optimal bulk tonnage mining methods.

The estimate of Mineral Resources may be materially affected by environmental, permitting, legal, title, taxation, socio-political, marketing, or other relevant issues. There is no certainty that all or any part of the Inferred Mineral Resource will be upgraded to an Indicated or Measured Mineral Resource as a result of continued exploration.

About Stillwater West

Group Ten is rapidly advancing the Stillwater West PGE-Ni-Cu-Co + Au project towards becoming a world-class source of low-carbon, sulphide-hosted nickel, copper, and cobalt, critical to the electrification movement, as well as key catalytic metals including platinum, palladium and rhodium used in catalytic converters, fuel cells, and the production of green hydrogen. Stillwater West positions Group Ten as the second-largest landholder in the Stillwater Complex, with a 100%-owned position adjoining and adjacent to Sibanye-Stillwater’s PGE mines in south-central Montana, USA¹. The Stillwater Complex is recognized as one of the top regions in the world for PGE-Ni-Cu-Co mineralization, alongside the Bushveld Complex and Great Dyke in southern Africa, which are similar layered intrusions. The J-M Reef, and other PGE-enriched sulphide horizons in the Stillwater Complex, share many similarities with the highly prolific Merensky and UG2 Reefs in the Bushveld Complex. Group Ten’s work in the lower Stillwater Complex has demonstrated the presence of large-scale disseminated and high-sulphide battery metals and PGE mineralization, similar to the Platreef in the Bushveld Complex². Drill campaigns by the Company, complemented by a substantial historic drill database, have delineated five deposits of Platreef-style mineralization across a core 9.2-kilometer span of the project, all of which are open for expansion into adjacent targets. Multiple earlier-stage Platreef-style and reef-type targets are also being advanced across the remainder of the 32-kilometer length of the project based on strong correlations seen in soil and rock geochemistry, geophysical surveys, geologic mapping, and drilling.

About Group Ten Metals Inc.

Group Ten Metals Inc. is a TSX-V-listed Canadian mineral exploration company focused on the development of high-quality platinum, palladium, nickel, copper, cobalt, and gold exploration assets in top North American mining jurisdictions. The Company’s core asset is the Stillwater West PGE-Ni-Cu-Co + Au project adjacent to Sibanye-Stillwater’s high-grade PGE mines in Montana, USA. Group Ten also holds the high-grade Black Lake-Drayton Gold project adjacent to Treasury Metals’ development-stage Goliath Gold Complex in northwest Ontario, and the Kluane PGE-Ni-Cu-Co project on trend with Nickel Creek Platinum‘s Wellgreen deposit in Canada‘s Yukon Territory.

About the Metallic Group of Companies

The Metallic Group is a collaboration of leading precious and base metals exploration companies, with a portfolio of large, brownfield assets in established mining districts adjacent to some of the industry’s highest-grade producers of silver and gold, platinum and palladium, and copper. Member companies include Metallic Minerals in the Yukon’s high-grade Keno Hill silver district and La Plata silver-gold-copper district of Colorado, Group Ten Metals in the Stillwater PGM-nickel-copper district of Montana, and Granite Creek Copper in the Yukon’s Minto copper district. The founders and team members of the Metallic Group include highly successful explorationists formerly with some of the industry’s leading explorers/developers and major producers. With this expertise, the companies are undertaking a systematic approach to exploration using new models and technologies to facilitate discoveries in these proven, but under-explored, mining districts. The Metallic Group is headquartered in Vancouver, BC, Canada, and its member companies are listed on the Toronto Venture, US OTC, and Frankfurt stock exchanges.

FOR FURTHER INFORMATION, PLEASE CONTACT:

Michael Rowley, President, CEO & Director
Phone: (604) 357 4790
Toll Free: (888) 432 0075
Email: info@grouptenmetals.com
Web: http://grouptenmetals.com

Quality Control and Quality Assurance

Mr. Allan Armitage, Ph.D., P.Geo., is a Qualified Person in accordance with National Instrument 43-101 and has reviewed and approved the technical content of this news release with respect to the 2021 Resource estimate. As independent QP, Mr. Armitage was responsible for the preparation of the technical information pertaining to the Resource estimate.

Mr. Mike Ostenson, P.Geo., is the Qualified Person for the purposes of National Instrument 43-101, and he has reviewed and approved the technical disclosure outside of the 2021 Resource estimate that is contained in this news release.

Forward-Looking Statements

Forward Looking Statements: This news release includes certain statements that may be deemed “forward-looking statements”. All statements in this release, other than statements of historical facts including, without limitation, statements regarding potential mineralization, historic production, estimation of mineral resources, the realization of mineral resource estimates, interpretation of prior exploration and potential exploration results, the timing and success of exploration activities generally, the timing of the timing and results of future resource estimates, permitting time lines, metal prices and currency exchange rates, availability of capital, government regulation of exploration operations, environmental risks, reclamation, titlefuture driling actiivities and the locations of such drilling, and future plans and objectives of the company are forward-looking statements that involve various risks and uncertainties. Although Group Ten believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the companies with securities regulators. Readers are cautioned that mineral resources that are not mineral reserves do not have demonstrated economic viability. Mineral exploration and development of mines is an inherently risky business. Accordingly, the actual events may differ materially from those projected in the forward-looking statements. For more information on Group Ten and the risks and challenges of their businesses, investors should review their annual filings that are available at www.sedar.com.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE: Group Ten Metals Inc.

Group Ten Metals Inc.Request Changes Approve

Tags Group Ten Metals, maurice jackson, Metallic Group of Companies, Michael Rowley, PGE, proven and probable, Stillwater West

Base Metals Breaking Energy Exclusive Interviews Junior Mining Nevada Copper

NEVADA COPPER – Reaching Commercial Scale Production

Post author By admin
Post date October 21, 2021

Tags maurice jackson, NCU, nevada copper, Open-Pit, pumpkin hollow, Randy Buffington, Underground

Junior Mining Labrador Gold Precious Metals Uncategorized

Labrador Gold Announces Receipt of Drill Permit for Appleton Fault Targets, Mobilzes Drill

Post author By admin
Post date October 18, 2021

Figure 1.

Location of planned drilling area along the Appleton Fault Zone.

TORONTO, Oct. 18, 2021 (GLOBE NEWSWIRE) — Labrador Gold Corp. (TSX.V:LAB | OTCQX:NKOSF | FNR: 2N6) (“LabGold” or the “Company”) is pleased to announce the receipt of Exploration Approval for diamond drilling of regional Appleton Fault Zone targets at its 100% controlled Kingsway Project near Gander, Newfoundland. The Kingsway project is located within the highly prospective Gander Gold District.

LabGold has mobilized a drill rig to the first target, located approximately 800m northeast of Big Vein (see Figure 1) and the Company expects drilling to begin this week. Initial drilling will take place up ice from where a significant number of pristine gold grains in till were found earlier this year (see news release dated August 5, 2021). Follow up exploration by the LabGold team has demonstrated the potential of this area and defined drill targets will be systematically drilled over the coming weeks. This is one of several gold anomalies comprising the “string of pearls” along the Appleton Fault Zone that are in various stages of advancement.

Figure 1. Location of planned drilling area along the Appleton Fault Zone.
https://www.globenewswire.com/NewsRoom/AttachmentNg/bc35e9ae-53c8-402c-bc50-f239e27497ad

“We are very excited to begin drilling the most advanced of six prospective gold targets that we have generated and are currently exploring along the Appleton Fault Zone,” said Roger Moss, President and CEO of Labrador Gold. “We know this is a very productive fault and the LabGold team has worked hard to get this target to the drill stage. With discoveries first at Big Vein, and more recently at Golden Glove, this anomalous area is next in line for a potential discovery. Now that we have the permit in place, we look forward to testing targets over a four km strike length of the Appleton Fault Zone northeast of Big Vein.”

Roger Moss, PhD., P.Geo., President and CEO of LabGold, a Qualified Person in accordance with Canadian regulatory requirements as set out in NI 43-101, has read and approved the scientific and technical information that forms the basis for the disclosure contained in this release.

The Company gratefully acknowledges the Newfoundland and Labrador Ministry of Natural Resources’ Junior Exploration Assistance (JEA) Program for its financial support for exploration of the Kingsway property.

About Labrador Gold

Labrador Gold is a Canadian based mineral exploration company focused on the acquisition and exploration of prospective gold projects in Eastern Canada.

In early March 2020, Labrador Gold acquired the option to earn a 100% interest in the Kingsway project in the Gander area of Newfoundland. The three licenses comprising the Kingsway project cover approximately 16km of the Appleton fault zone which is associated with gold occurrences in the region, including the New Found Gold discovery. Infrastructure in the area is excellent located just 18km from the town of Gander with road access to the project, nearby electricity and abundant local water. LabGold recently increased its 20,000 metre diamond drill program to 50,000 metres targeting high-grade epizonal gold mineralization following encouraging early results. The Company has approximately $34 million in working capital and is well funded to carry out the planned program.

The Hopedale property covers much of the Hunt River and Florence Lake greenstone belts that stretch over 80 km. The belts are typical of greenstone belts around the world but have been underexplored by comparison. Initial work by Labrador Gold during 2017 show gold anomalies in soils and lake sediments over a 3 kilometre section of the northern portion of the Florence Lake greenstone belt in the vicinity of the known Thurber Dog gold showing where grab samples assayed up to 7.8g/t gold. In addition, anomalous gold in soil and lake sediment samples occur over approximately 40 kilometres along the southern section of the greenstone belt (see news release dated January 25^th 2018 for more details). Labrador Gold now controls approximately 57km strike length of the Florence Lake Greenstone Belt.

The Company has 152,912,462 common shares issued and outstanding and trades on the TSX Venture Exchange under the symbol LAB.

For more information please contact:

Roger Moss, President and CEO Tel: 416-704-8291

Or visit our website at: www.labradorgold.com

Twitter: @LabGoldCorp

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements: This news release contains forward-looking statements that involve risks and uncertainties, which may cause actual results to differ materially from the statements made. When used in this document, the words “may”, “would”, “could”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” and similar expressions are intended to identify forward-looking statements. Such statements reflect our current views with respect to future events and are subject to risks and uncertainties. Many factors could cause our actual results to differ materially from the statements made, including those factors discussed in filings made by us with the Canadian securities regulatory authorities. Should one or more of these risks and uncertainties, such as actual results of current exploration programs, the general risks associated with the mining industry, the price of gold and other metals, currency and interest rate fluctuations, increased competition and general economic and market factors, occur or should assumptions underlying the forward looking statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, or expected. We do not intend and do not assume any obligation to update these forward-looking statements, except as required by law. Shareholders are cautioned not to put undue reliance on such forward-looking statements.

Tags Appleton Fault Zone, Kingsway Gold Project, LAB, Labrador Gold, Roger Moss

Energy Junior Mining Precious Metals Silver Hammer Uncategorized

Silver Hammer Mining Announces Appointment of Morgan Lekstrom as CEO and Alnesh Mohan as Corporate Secretary

Post author By admin
Post date October 15, 2021

VANCOUVER, British Columbia, Oct. 15, 2021 (GLOBE NEWSWIRE) — Silver Hammer Mining Corp. (CSE: HAMR) (the “Company” or “Silver Hammer”) is pleased to announce the appointment of Morgan Lekstrom as CEO of the Company and Alnesh Mohan as Corporate Secretary of the Company, effective immediately.

Morgan Lekstrom, currently serving as the President of Silver Hammer, will now assume the role of President and CEO and Alnesh Mohan, currently serving as the CFO of Silver Hammer, will now resume the role of Corporate Secretary. Michael Dake, who has served as CEO of the Company since 2017, will step down from his executive role and will remain as a director of Silver Hammer.

“We thank Michael for his service and expertise, including helping take Silver Hammer (formerly Lakewood Exploration) public and wish him success in his future endeavors,” stated Morgan Lekstrom. “I am excited to undertake the role of CEO, leading a team of industry experts as we grow and advance our portfolio of top-tier, US silver assets.”

About Silver Hammer Mining Corp.

Silver Hammer Mining Corp. is a junior resource company advancing the past-producing Silver Strand Mine in the Coeur d’Alene Mining District in Idaho, USA, both the Eliza Silver Project and the Silverton Silver Mine in one of the world’s most prolific mining jurisdictions in Nevada and the Lacy Gold Project in British Columbia, Canada. The Company has commenced an initial drill program at Silver Strand that will test for silver and gold mineralization immediately below the mine’s lowest level extending only 90 metres below surface. Silver Hammer strives to become a multi-mine silver producer and will focus near-term exploration and drilling plans at the Company’s Idaho and Nevada silver-gold assets.

*Mineralization hosted on adjacent and/or nearby properties is not necessarily indicative of mineralization hosted on the Company’s property.

On Behalf of the Board of Silver Hammer Mining Corp.

Morgan Lekstrom, President

Corporate Office: 551 Howe Street, Vancouver, British Columbia V6C 2C2, Canada

Contact: Kristina Pillon, President, High Tide Consulting Corp.

604.908.1695 / investors@silverhammermining.com

The CSE does not accept responsibility for the adequacy or accuracy of this release. The Canadian Securities Exchange has neither approved nor disapproved the contents of this press release.

Tags HAMR, Morgan Lekstrom, Silver Hammer Mining, Silver Strand Mine

Base Metals Energy Granite Creek Copper Junior Mining

Granite Creek Copper Receives Positive Metallurgical Results at Carmacks Copper-Gold Project in Yukon, Canada

Post author By admin
Post date October 14, 2021

VANCOUVER BC / ACCESSWIRE / October 14, 2021 / Granite Creek Copper Ltd. (TSXV:GCX)(OTCQB:GCXXF) (“Granite Creek” or the “Company“) is pleased to announce the receipt of positive results from metallurgy testing completed on sulfide mineralized core samples from the Company’s Carmacks project.

Testing was completed as part of trade-off studies now underway under the direction of Sedgman Canada and Mining Plus with the objective of developing the basis for an updated Preliminary Economic Assessment (“PEA”) on the project. Two representative samples of copper sulfide material and one sample of copper oxide material were delivered to Bureau Veritas Commodities, Metallurgy Division, for rougher flotation kinetic testing and open cleaner flotation testing. The purpose of the testing was to determine how amenable the sulfide mineralization present at the Carmacks deposit was to concentration by flotation, what recoveries could be expected, and to lay the groundwork for further testing. A preliminary copper flotation recovery model was generated at a fixed 25% copper concentrate grade with test results as summarized below:

Recoveries of greater than 95% for copper into a 25% copper concentrate are possible.
Copper sulfide minerals are well-liberated for rougher recovery via flotation at P₈₀ of 150 µm.
A secondary regrind size at P₈₀ of 25 µm can achieve 25% copper grade and high cleaner stage recovery.
Gold is associated primarily with copper sulfide minerals and minor pyrite. Flotation of gold with copper concentrate is likely the most economical way to recover gold.
High chalcopyrite content as the copper mineral and low pyrite content within the samples indicate a simple reagent scheme and relatively easy copper flotation upgrade.

The preliminary tests indicate that well-established flotation methods with known reagents will likely be the preferred processing method for sulfide material at Carmacks. The next stage of metallurgical test work will involve greater variability of samples to validate copper and gold recoveries as well as assessing potential levels of silver and molybdenum recoveries.https://s.yimg.com/rq/darla/4-9-0/html/r-sf-flx.html

Granite Creek President and CEO, Tim Johnson, commented, “These initial metallurgical results are very encouraging and are an important step in bringing the sulfide resources present at the Carmacks deposit into an updated mine plan and PEA. The Company’s belief in, and focus on, the copper sulfide potential at Carmacks and Carmacks North is being validated and advanced with every phase of work completed. We look forward to continuing to roll out the Carmacks story with substantive news flow throughout the remainder of the year and into 2022, including drill results from the recently completed, three-phase 2021 campaign.”

About Granite Creek Copper

Granite Creek, a member of the Metallic Group of Companies, is a Canadian exploration company focused on the 176-square-kilometer Carmacks project in the Minto copper district of Canada’s Yukon Territory. The project is on trend with the high-grade Minto copper-gold mine, operated by Minto Explorations Ltd, to the north, and features excellent access to infrastructure with the nearby paved Yukon Highway 2, along with grid power within 12 km. More information about Granite Creek Copper can be viewed on the Company’s website at www.gcxcopper.com.

FOR FURTHER INFORMATION PLEASE CONTACT:

Timothy Johnson, President & CEO
Telephone: 1 (604) 235-1982
Toll-Free: 1 (888) 361-3494
E-mail: info@gcxcopper.com
Website: www.gcxcopper.com
Metallic Group: www.metallicgroup.ca

Qualified Person

Mr (Sam) Yoon Seong Cho, MASC P.Eng., a qualified person for the purposes of National Instrument 43-101, has reviewed and approved the technical disclosure contained in this news release.

Forward-Looking Statements

This news release includes certain statements that may be deemed “forward-looking statements”. All statements in this release, other than statements of historical facts including, without limitation, statements regarding potential mineralization, historic production, estimation of mineral resources, the realization of mineral resource estimates, interpretation of prior exploration and potential exploration results, the timing and success of exploration activities generally, the timing and results of future resource estimates, permitting timelines, metal prices and currency exchange rates, availability of capital, government regulation of exploration operations, environmental risks, reclamation, title, and future plans and objectives of the company are forward-looking statements that involve various risks and uncertainties. Although Granite Creek Copper believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the companies with securities regulators. Readers are cautioned that mineral resources that are not mineral reserves do not have demonstrated economic viability. Mineral exploration and development of mines is an inherently risky business. Accordingly, the actual events may differ materially from those projected in the forward-looking statements. For more information on Granite Creek Copper and the risks and challenges of their businesses, investors should review their annual filings that are available at www.sedar.com.

SOURCE: Granite Creek Copper Ltd.

View source version on accesswire.com:
https://www.accesswire.com/668103/Granite-Creek-Copper-Receives-Positive-Metallurgical-Results-at-Carmacks-Copper-Gold-Project-in-Yukon-Canada

Tags GCX, Granite Creek Copper, Tim Johnson

Junior Mining Silver Hammer

Silver Hammer Mining Corp. Commences Phase 1 Drilling at the Silver Strand Mine, Idaho

Post author By admin
Post date October 14, 2021

Figure 1

Silver Strand Underground drill program in dark blue

VANCOUVER, British Columbia, Oct. 14, 2021 (GLOBE NEWSWIRE) — Silver Hammer Mining Corp. (CSE: HAMR / OTC: HAMRF) (“Silver Hammer” or the “Company”) is pleased to report that Phase I drilling has commenced at the Silver Strand Mine in Idaho.

Phase I drilling will include both underground drilling and select shallow surface drilling. Past production ceased at just 90 metres depth and this first phase of underground drilling will test immediately below what was historically mined at Silver Strand (see Figure 1.) while surface drilling will test for lateral vein extensions along strike and will step out to test surrounding targets.

Results from Phase I drilling are expected to provide valuable information regarding the plunge, depth, lateral expansion, and dip of the veins, to support the Company’s modelling and future phases of drilling. This information will also help the Company to set expectations for timing of an initial resource.

“By working closely with a local drilling company and the local forest service with a plan to use an innovative and environmentally friendly drilling method for limited surface drilling in addition to utilizing the existing infrastructure for underground drilling, we were able to obtain drilling permissions in an expedited time frame,” stated President Morgan Lekstrom. “The recently completed underground rehabilitation will enable us to achieve a better return on investment per metre drilled by targeting depth extensions from a drilling bay at 90 metres depth by allowing the drill bit to bypass significant overburden. We are also very excited to report that drilling at Silver Strand has already hit the vein and mafic dyke (magnetic portions of the rock) where we expected, but has also hit another vein on the opposite side of the mafic dyke.”

Figure 1. Silver Strand Underground drill program in dark blue
https://www.globenewswire.com/NewsRoom/AttachmentNg/59b21348-7e8b-4eb0-bf83-c01a0945d4b4

Qualified Person

Technical aspects of this press release have been reviewed and approved under the supervision of Philip Mulholland, P.Geo. Mr. Mulholland is a Qualified Person (QP) under National Instrument 43-101 Standards of Disclosure for Mineral Projects.

About Silver Hammer Mining Corp.

Silver Hammer Mining Corp. is a junior resource company advancing the past-producing Silver Strand Mine in the Coeur d’Alene Mining District in Idaho, USA, both the Eliza Silver Project and the Silverton Silver Mine in one of the world’s most prolific mining jurisdictions in Nevada and the Lacy Gold Project in British Columbia, Canada. The Company has commenced an initial drill program at Silver Strand that will test for silver and gold mineralization immediately below the mine’s lowest level extending only 90 metres below surface. Silver Hammer strives to become a multi-mine silver producer and will focus on near-term exploration and drilling plans at the Company’s Idaho and Nevada silver-gold assets.

*Mineralization hosted on adjacent and/or nearby properties is not necessarily indicative of mineralization hosted on the Company’s property.

On Behalf of the Board of Silver Hammer Mining Corp.

Morgan Lekstrom, President

Corporate Office: 551 Howe Street, Vancouver, British Columbia V6C 2C2, Canada

For more information, contact:

Kristina Pillon, Corporate Communications
Phone: 604.908.1695
Email: investors@silverhammermining.com

The CSE does not accept responsibility for the adequacy or accuracy of this release.

The Canadian Securities Exchange has neither approved nor disapproved the contents of this press release.

Tags HAMR, Morgan Lekstrom, Silver Hammer Mining, Silver Strand Mine

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

Category: Blog

Lion One Reports New High-Grade Intercepts to Expand Deep Feeder Zone 500 at Tuvatu, Fiji

Silver Hammer Mining Commerces Trading on the OTCQB and Provides Lacy Project Update

Granite Creek Copper Reports Final Results from Phase 1 of 2021 Drill Program, Including 23.30 Meters of 2.27 % Copper Equivalent, at the Carmacks Copper-Gold-Silver Project in Yukon, Canada

Copper Is Heading For New Highs- A Bullish Trend In Nevada Copper (NEVDF)

NEVADA COPPER – Reaching Commercial Scale Production

Labrador Gold Announces Receipt of Drill Permit for Appleton Fault Targets, Mobilzes Drill

Figure 1.

Location of planned drilling area along the Appleton Fault Zone.

Silver Hammer Mining Announces Appointment of Morgan Lekstrom as CEO and Alnesh Mohan as Corporate Secretary

Granite Creek Copper Receives Positive Metallurgical Results at Carmacks Copper-Gold Project in Yukon, Canada

Silver Hammer Mining Corp. Commences Phase 1 Drilling at the Silver Strand Mine, Idaho

Figure 1

Silver Strand Underground drill program in dark blue

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

Figure 1.

Location of planned drilling area along the Appleton Fault Zone.

Figure 1

Silver Strand Underground drill program in dark blue

Sign up to Stay Up to Date on News and Progress from Page