Joining us for a conversation is Morgan Lekstrom the CEO of Silver Hammer Mining (CSE: HAMR), to provide a company update on the Silver Strand Mine, which is getting ready for a highly anticipated drill program. The past-producing Silver Strand Mine is comprised of 70 claims over a 5.5 kilometres strike length atop the Revett formation, a silver belt within the renowned Coeur d’Alene mining district in Idaho, a district that has produced over 1.2 billion ounces of silver and is host to some of the world’s largest silver mines, many of which were mined to depths exceeding 1800 metres.
Also, we will find out the proposed plans on the Eliza Project. The Eliza Silver Project is located along strike of the Hamilton Mining District (Hamilton District), Nevada’s highest-grade silver district, which produced 40 million (M) ounces (oz) silver with grades up to 25,000 grams per tonne (g/t) between 1876-1890. Silver Hammer Mining has some of the most respected value creators in the Junior Mining Industry with names such as Lawrence Roulston. If you like Junior Mining Stocks this is a must watch interview!
VANCOUVER, BC / ACCESSWIRE / July 7, 2022 / Stillwater Critical Minerals (formerly Group Ten Metals) (TSXV:PGE)(OTCQB:PGEZF)(FSE:5D32) (the “Company” or “SWCM”) today reports wide, high-grade intervals of nickel sulphide mineralization with palladium, platinum, rhodium, cobalt, copper and gold in a final tranche of first-pass drill results from the 14-hole resource expansion campaign completed at the Company’s flagship Stillwater West PGE-Ni-Cu-Co + Au project in Montana, USA. Additional rhodium results are pending.
Results continue to support the Company’s priority objective of expanding the October 2021 inaugural mineral resource estimates with multiple wide and highly mineralized intervals returned in step-out drilling in six holes at the HGR deposit area at Iron Mountain (see Table 1 and Figure 1). Drilling in 2021 focused on resource expansion in three of the five deposit areas delineated by the 2021 estimates. Similar wide and well-mineralized intervals have now been reported from all three deposit areas as announced December 20, 2021, March 7, 2022, and May 3, 2022. Mineralization remains open to expansion along trend and at depth in all five deposit areas, which are set within 12 kilometers of the broader 32-kilometer-long land package in the lower Stillwater Igneous Complex (see Figure 2).
Highlights from six holes drilled in the HGR deposit area in 2021 include:
IM2021-05 returned379.2 meters of continuous battery and precious metal mineralization starting at surface and grading 0.33% Nickel Equivalent (“NiEq”), equal to 0.88 g/t Palladium Equivalent (“PdEq”), with successive contained higher-grade intervals including:
133.2 meters of 0.38% NiEq (1.01 g/t PdEq);
21.5 meters of 0.66% NiEq (1.75 g/t PdEq); and
7.3 meters of 0.79% NiEq (2.11 g/t PdEq) as 0.45% Ni, 0.51 g/t Pd+Pt+Au+Rh (“4E”), 0.17% Cu and 0.026% Co .
IM2021-05 is the second most highly mineralized drill hole ever recorded in the Stillwater district with a grade-thickness value of 334 gram-meter PdEq, after CM2021-01 which returned 530 gram-meter PdEq.
IM2021-06 returned 94.0 meters of 0.48% NiEq (1.28 g/t PdEq) within333.0 meters of continuous mineralization grading 0.28% NiEq (0.73 g/t PdEq). Additional contained intervals at higher grades include 26.4 meters of 0.63% NiEq (1.69 g/t PdEq) and 4.8 meters of 1.38 g/t 4E which includes 0.077 g/t Rh .
IM2021-04 , partially reported on March 7, 2022, returned 115.0 meters of 0.38% NiEq (1.02 g/t PdEq) within 306.5 meters of continuous mineralization grading 0.26% NiEq (0.68g/t PdEq). Additional contained intervals at higher grades include:
9.8 meters of high-grade PGE mineralization with 0.89% NiEq (2.38 g/t PdEq) as 1.54 g/t 4E including 1.02 g/t Pd, 0.39 g/t Pt, and 0.064 g/t Rh, along with base metal mineralization; and
4.8 meters of high-grade battery metal mineralization with 1.47% NiEq (3.91 g/t PdEq) as 0.74% Ni, 0.65% Cu, 0.070% Co, plus 0.30 g/t 4E including 0.055 g/t Rh (see photo below).
Drilling in the HGR deposit area in 2021 focused on step-out holes in the area of IM-2019-03 which returned 272.5 meters of 0.42% NiEq (1.11 g/t PdEq) including 26.8 meters of 0.96% NiEq (2.55 g/t PdEq) as 0.34% Ni, 0.15% Cu, 0.019% Co, 0.33 g/t Pt, 0.77 g/t Pd, 0.08 g/t Au, and 0.049 g/t Rh (see Figures 1 to 4).
These results, alongside results released May 3 and March 7, 2022, and December 20, 2021, demonstrate significant potential to expand the October 2021 mineral resource estimates with multiple long intervals at grades well above the 0.20% NiEq cut-off grade used in that study (see bolded assay values on Table 1). Potential is also shown to expand existing resources at higher cut-off grades, such as 0.35% and 0.50% NiEq (red values and shaded rows, respectively, on Table 1). Moreover, as shown in Figures 1 to 4, these results provide important intercepts in step-out drill holes located up to several hundred meters from the resource estimate block models.
Results also continue to highlight the potential for significant co-product rhodium values at Stillwater West, with drill samples in Iron Mountain holes IM2021-04, -05, and -06 returning up to 0.365 g/t Rh within the mineralized horizons. At recent values, rhodium trades at more than 16 times the value of platinum and seven times the value of palladium on a spot price basis at over US$14,000 per ounce. Sibanye-Stillwater, adjacent to Stillwater Critical Minerals’ Stillwater West project, is the primary US producer. Supply constraints for rhodium have supported rising prices since 2017.
Complete first-pass assay results have now been reported from all 14 holes drilled in 2021. Additional rhodium assays are pending on mineralized intervals.
Stillwater Critical Minerals, Thursday, July 7, 2022, Press release picture
Dr. Danie Grobler, Stillwater Critical Minerals’ Vice-President of Exploration, commented “Stillwater West continues to demonstrate significant equivalence with the Platreef deposits of the northern Bushveld Complex. Albie Brits and I are actively applying our combined four decades of Platreef experience in our new roles at Stillwater Critical Minerals with a priority on updating the geologic model to support planning and refining of drill targets for the next phase of follow-on work. Our current focus is to define detailed stratigraphic and structural controls within the 2021 Inferred Resource areas. We are also in the process of reviewing and prioritizing higher-grade pegmatoidal pyroxenite targets within the Stillwater stratigraphy that have not been fully tested.”
Michael Rowley, President and CEO, commented, “Results from the Iron Mountain drill campaign continue to demonstrate the remarkable potential for expansion of our inaugural mineral resource with multiple wide intercepts of battery and precious metals and contained intervals at successive higher grades. In particular our success in targeting Platreef-style nickel sulphide mineralization in step-out holes in the area of IM2019-03 shows excellent potential for resource growth, similar to our success in the DR and Hybrid deposit areas over seven kilometers to the west. We continue to see confirmation of a large mineralized system with an impressive endowment of eight of the commodities listed as critical by the US government. We look forward to further updates on our planned resource expansion, exploration priorities for 2022, and other news in the near term.”
Table 1 – Highlight Results from the 2021 Expansion Drill Campaign at the HGR Deposit Area
Stillwater Critical Minerals, Thursday, July 7, 2022, Press release picture
Highlighted significant mineralized intercepts are presented above. Grade-thickness values cover significant mineralized intervals with total palladium and nickel equivalent grade-thickness determined by multiplying the thickness of continuous mineralization (in meters) by the palladium equivalent grade (in grams/tonne) to provide gram-meter values (g-m) or by multiplying the nickel equivalent grade (in percent) to provide percent-meter values as shown. Total nickel and palladium equivalent calculations reflect total gross metal content using long term metal prices (all USD): $7.00/lb nickel (Ni), $3.50/lb copper (Cu), $20.00/lb cobalt (Co), $1,000/oz platinum (Pt), $1,800/oz palladium (Pd), and $1,600/oz gold (Au). Equivalent values have not been adjusted to reflect metallurgical recoveries. Total metal equivalent values include both base and precious metals. Intervals are reported as drilled widths and are believed to be representative of the actual width of mineralization.
About Stillwater West
Stillwater Critical Minerals is rapidly advancing the Stillwater West PGE-Ni-Cu-Co + Au project towards becoming a world-class source of low-carbon, sulphide-hosted nickel, copper, and cobalt, critical to the electrification movement, as well as key catalytic metals including platinum, palladium and rhodium used in catalytic converters, fuel cells, and the production of green hydrogen. Stillwater West positions SWCM as the second-largest landholder in the Stillwater Complex, with a 100%-owned position adjoining and adjacent to Sibanye-Stillwater’s PGE mines in south-central Montana, USA 1 . The Stillwater Complex is recognized as one of the top regions in the world for PGE-Ni-Cu-Co mineralization, alongside the Bushveld Complex and Great Dyke in southern Africa, which are similar layered intrusions. The J-M Reef, and other PGE-enriched sulphide horizons in the Stillwater Complex, share many similarities with the highly prolific Merensky and UG2 Reefs in the Bushveld Complex. SWCM’s work in the lower Stillwater Complex has demonstrated the presence of large-scale disseminated and high-sulphide battery metals and PGE mineralization, similar to the Platreef in the Bushveld Complex 2 . Drill campaigns by the Company, complemented by a substantial historic drill database, have delineated five deposits of Platreef-style mineralization across a core 12-kilometer span of the project, all of which are open for expansion into adjacent targets. Multiple earlier-stage Platreef-style and reef-type targets are also being advanced across the remainder of the 32-kilometer length of the project based on strong correlations seen in soil and rock geochemistry, geophysical surveys, geologic mapping, and drilling.
About Stillwater Critical Minerals Corp.
Stillwater Critical Minerals (TSX.V: PGE | OTCQB: PGEZF) is a mineral exploration company focused on its flagship Stillwater West PGE-Ni-Cu-Co + Au project in the iconic and famously productive Stillwater mining district in Montana, USA. With the recent addition of two renowned Bushveld and Platreef geologists to the team, the Company is well positioned to advance the next phase of large-scale critical mineral supply from this world-class American district, building on past production of nickel, copper, and chromium, and the on-going production of platinum group and other metals by neighbouring Sibanye-Stillwater. The Platreef-style nickel and copper sulphide deposits at Stillwater West contain a compelling suite of critical minerals and are open for expansion along trend and at depth, with an updated NI 43-101 mineral resource update expected in 2022.
Stillwater Critical Minerals also holds the high-grade Black Lake-Drayton Gold project adjacent to Treasury Metals’ development-stage Goliath Gold Complex in northwest Ontario, which is currently under an earn-in agreement with an option to joint venture whereby Heritage Mining may earn up to a 90% interest in the project by completing payments and work on the project. The Company also holds the Kluane PGE-Ni-Cu-Co project on trend with Nickel Creek Platinum‘s Wellgreen deposit in Canada‘s Yukon Territory.
About the Metallic Group of Companies
The Metallic Group is a collaboration of leading precious and base metals exploration companies, with a portfolio of large, brownfield assets in established mining districts adjacent to some of the industry’s highest-grade producers of silver and gold, platinum and palladium, and copper. Member companies include Metallic Minerals in the Yukon’s high-grade Keno Hill silver district and La Plata silver-gold-copper district of Colorado, Granite Creek Copper in the Yukon’s Minto copper district, and Stillwater Critical Minerals in the Stillwater PGM-nickel-copper district of Montana. The founders and team members of the Metallic Group include highly successful explorationists formerly with some of the industry’s leading explorers/developers and major producers. With this expertise, the companies are undertaking a systematic approach to exploration using new models and technologies to facilitate discoveries in these proven, but under-explored, mining districts. The Metallic Group is headquartered in Vancouver, BC, Canada, and its member companies are listed on the Toronto Venture, US OTC, and Frankfurt stock exchanges.
Note 1: References to adjoining properties are for illustrative purposes only and are not necessarily indicative of the exploration potential, extent or nature of mineralization or potential future results of the Company’s projects.
Note 2: Magmatic Ore Deposits in Layered Intrusions-Descriptive Model for Reef-Type PGE and Contact-Type Cu-Ni-PGE Deposits, Michael Zientek, USGS Open-File Report 2012-1010.
2021 drill core samples were analyzed by ACT Labs in Vancouver, B.C. Sample preparation: crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm included cleaner sand. Gold, platinum, and palladium were analyzed by fire assay (1C-OES) with ICP finish. Selected major and trace elements were analyzed by peroxide fusion with 8-Peroxide ICP-OES finish to insure complete dissolution of resistate minerals. Following industry QA/QC standards, blanks, duplicate samples, and certified standards were also assayed.
Mr. Mike Ostenson, P.Geo., is the qualified person for the purposes of National Instrument 43-101, and he has reviewed and approved the technical disclosure contained in this news release.
Forward-Looking Statements
Forward Looking Statements: This news release includes certain statements that may be deemed “forward-looking statements”. All statements in this release, other than statements of historical facts including, without limitation, statements regarding potential mineralization, historic production, estimation of mineral resources, the realization of mineral resource estimates, interpretation of prior exploration and potential exploration results, the timing and success of exploration activities generally, the timing and results of future resource estimates, permitting time lines, metal prices and currency exchange rates, availability of capital, government regulation of exploration operations, environmental risks, reclamation, title, and future plans and objectives of the company are forward-looking statements that involve various risks and uncertainties. Although Stillwater Critical Minerals believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the companies with securities regulators. Readers are cautioned that mineral resources that are not mineral reserves do not have demonstrated economic viability. Mineral exploration and development of mines is an inherently risky business. Accordingly, the actual events may differ materially from those projected in the forward-looking statements. For more information on Stillwater Critical Minerals and the risks and challenges of their businesses, investors should review their annual filings that are available at www.sedar.com .
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Stillwater Critical Minerals, Thursday, July 7, 2022, Press release pictureStillwater Critical Minerals, Thursday, July 7, 2022, Press release pictureStillwater Critical Minerals, Thursday, July 7, 2022, Press release pictureStillwater Critical Minerals, Thursday, July 7, 2022, Press release picture
VANCOUVER, British Columbia, July 07, 2022 (GLOBE NEWSWIRE) — Silver Hammer Mining Corp. (CSE: HAMR; OTCQB: HAMRF) (the “Company” or “Silver Hammer”) is pleased to announce plans to begin an 11-hole Phase II diamond drill program from the Company’s established underground drilling station, before the end of July at its past-producing Silver Strand Project in Idaho.
The Phase II drill program will focus on expanding the known silver-gold zone down-dip and will also assess the potential for additional mineralized chutes (Figure 1). Targets for this program are based on exploration work performed by Silver Hammer in 2021, including a drone supported magnetic survey, Phase I drilling, as well integration of drilling data acquired from previous owners of the Silver Strand Project (see Jan 26, 2022 news release).
“This Phase II drill program will build upon results of the Phase I program completed late 2021, which confirmed that silver and gold-bearing sulphide mineralization extends beneath the historic mine workings,” stated President & CEO Morgan Lekstrom. “As with Phase I, we will utilize an existing underground drift and drilling bay, which we rehabilitated last year, to begin to test the depth extent of the known mineralized body as well as to test for additional mineralized chutes in a very cost-effective manner.”
The Company has signed a contract with Nasco Industrial Services and Supply, which will use HQ, 3.5-inch diameter drill core to obtain good core recovery and relatively large core samples for reliable assays.
Silver Hammer is also progressing exploration of the Eliza Project in Nevada with a detailed follow-up soil grid sampling program, the results of which are expected in late July.
Qualified Person
Technical aspects of this press release have been reviewed and approved by Philip Mulholland, a Certified Professional Geologist (CPG) with the American Institute of Professional Geologists, a contractor of the Company and the designated Qualified Person (QP) under National Instrument 43-101 Standards of Disclosure for Mineral Projects.
About Silver Hammer Mining Corp.
Silver Hammer Mining Corp. is a junior resource company advancing the flagship past-producing Silver Strand Mine in the Coeur d’Alene Mining District in Idaho, USA, as well both the Eliza Silver Project and the Silverton Silver Mine in one of the world’s most prolific mining jurisdictions in Nevada and the Lacy Gold Project in British Columbia, Canada. Silver Hammer’s primary focus is defining and developing silver deposits near past-producing mines that have not been adequately tested. The Company’s portfolio also provides exposure to copper and gold discoveries.
Disclaimer note: Mineralization hosted on adjacent and/or nearby properties is not necessarily indicative of mineralization hosted on the Company’s projects.
On Behalf of the Board of Silver Hammer Mining Corp.
Morgan Lekstrom, President and CEO
Corporate Office: 551 Howe Street, Vancouver, British Columbia V6C 2C2, Canada
The CSE has neither approved nor disapproved the contents of this news release. Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the CSE) accepts responsibility for the adequacy or accuracy of this release.
KELOWNA, BC / ACCESSWIRE / July 7, 2022 / Diamcor Mining Inc. (TSX-V:DMI), (OTCQB:DMIFF), (FRA:DC3A), (“Diamcor” or, the “Company”) announces today that the optimization and refinement efforts to its upgraded processing plant continued as planned during the quarter. These combined efforts continue to demonstrate the processing plant’s potential to support the Company’s goal to increase long-term processing volumes. The Company also reports that gross revenues from the tender and sales of rough diamonds held in its fiscal first quarter ended June 30, 2022 (“Fiscal Q1”), totaled (USD) $557,559.22. Total carats sold during Fiscal Q1 were 3,061.70 resulting in an average dollar per carat of (USD) $182.11. These results were lower in part due to the Company electing to withhold 1944.36 carats from the Fiscal Q1 tender and sales planned for June 2022. The withholding of these rough diamonds was done to take advantage of what the Company expects will be a more positive price environment forecasted for July 2022. This resulted in a decrease in revenues realized in the quarter, but the Company anticipates it will receive higher aggregate revenue for these rough diamonds in July 2022.
The Company experienced reduced processing volumes in Fiscal Q1, when compared to the previous quarter, which was partially attributable to the upgrade optimization efforts and supply chain delays. The reduced processing volumes were even more significantly attributable to the unusually cold weather in South Africa during the end of the quarter and into July, resulting in significant unplanned rolling power blackouts implemented by the country’s national power supplier, Eskom. Despite the complications associated with managing these unplanned daily power outages, the upgrades continued to demonstrate increases in processing volumes per operating hour of up to 70% over historical levels. The capacity to further increase volumes over the long-term is expected once Eskom is able to reduce or eliminate the rolling power outages currently being experienced throughout South Africa. The Company continues to monitor the situation and where appropriate, with due consideration for diesel usage and costs, supplement power outages by using Gen-Set power and by adjusting operations accordingly for the short-term. Additionally, Diamcor is finalizing plans to augment their current Gen-Set power capabilities to withstand future power outages with minimal interruptions. Further increases in processing volumes are being targeted as the Company continues to refine and expand its operations as planned by the end of 2022.
Operating Highlights
Processing Volumes Increasing. Despite the current issues surrounding the national power supply in South Africa, efforts to optimize the completed upgrades were successful, resulting in processing volume increases per operating hour of up to 70% over historical volumes. Additional increases in processing volumes remain targeted for the current quarter as issues with consistent power supply are resolved in due course.
Reduction in Operating Costs on a Per Ton Basis. The screening upgrades and additions completed to date have achieved the Company’s goal to increase hourly processing volumes and reduce operating costs through the reduction of fine clay and sands in materials being processed. These upgrades have resulted in a reduction in consumables and improvements in handling and equipment cycle times.
Water Recovery Improvements. Available fresh water, and the management of wastewater, in any processing plant is a key element to increasing processing volumes in semi-arid regions. The Company is pleased to report the initial efforts completed to date have already resulted in a surplus of water available for processing. The Company remains on target to finalize all water recovery upgrades prior to the end of the current quarter with a focus on a final water cleaning recovery system to provide the potential for further increases to long-term processing volumes.
“We continue to be pleased with the results of the recently completed upgrades, and our operations team has done an excellent job of dealing with the complexities of various global supply chain issues, and more recently, the unexpected national power supply issues in South Africa. Despite these short-term issues, the team has continued to deliver on the majority of the planned upgrades on time and on budget,” stated Mr. Dean Taylor, Diamcor CEO. “We now look forward to the ability to process material without interruption on a daily basis which will provide us with the opportunity to support our efforts to further increase processing volumes to position our Company at a time when rough diamond supplies are contracting.”
About Diamcor Mining Inc.
Diamcor Mining Inc. is a fully reporting publicly traded junior diamond mining company which is listed on the TSX Venture Exchange under the symbol V.DMI, and on the OTC QB International under the symbol DMIFF. The Company has a well-established operational and production history in South Africa and extensive prior experience supplying rough diamonds to the world market.https://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522ctopid%2522%253A%25221542500%253B1577000%253B1480989%2522%252C%2522hashtag%2522%253A%25221542500%253B1577000%253B1480989%2522%252C%2522wiki_topics%2522%253A%2522Power_outage%253BSouth_Africa%253BCompany_(musical)%253BTSX_Venture_Exchange%2522%252C%2522lmsid%2522%253A%2522a077000000LnOyOAAV%2522%252C%2522revsp%2522%253A%2522accesswire.ca%2522%252C%2522lpstaid%2522%253A%2522ed09bdbd-5cba-3806-8bc1-7d793c886b6d%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D
About the Tiffany & Co. Alliance
The Company has established a long-term strategic alliance and first right of refusal with Tiffany & Co. Canada, a subsidiary of world famous New York based Tiffany & Co., to purchase up to 100% of the future production of rough diamonds from the Krone-Endora at Venetia Project at then current prices to be determined by the parties on an ongoing basis. In conjunction with this first right of refusal, Tiffany & Co. Canada also provided the Company with financing to advance the Project. Tiffany & Co. is owned by Moet Hennessy Louis Vuitton SE (LVMH), a publicly traded company which is listed on the Paris Stock Exchange (Euronext) under the symbol LVMH and on the OTC under the symbol LVMHF. For additional information on Tiffany & Co., please visit their website at www.tiffany.com.
About Krone-Endora at Venetia
In February 2011, Diamcor acquired the Krone-Endora at Venetia Project from De Beers Consolidated Mines Limited, consisting of the prospecting rights over the farms Krone 104 and Endora 66, which represent a combined surface area of approximately 5,888 hectares directly adjacent to De Beers’ flagship Venetia Diamond Mine in South Africa. On September 11, 2014, the Company announced that the South African Department of Mineral Resources had granted a Mining Right for the Krone-Endora at Venetia Project encompassing 657.71 hectares of the Project’s total area of 5,888 hectares. The Company has also submitted an application for a mining right over the remaining areas of the Project. The deposits which occur on the properties of Krone and Endora have been identified as a higher-grade “Alluvial” basal deposit which is covered by a lower-grade upper “Eluvial” deposit. The deposits are proposed to be the result of the direct-shift (in respect to the “Eluvial” deposit) and erosion (in respect to the “Alluvial” deposit) of material from the higher grounds of the adjacent Venetia Kimberlite areas. The deposits on Krone-Endora occur in two layers with a maximum total depth of approximately 15.0 metres from surface to bedrock, allowing for a very low-cost mining operation to be employed with the potential for near-term diamond production from a known high-quality source. Krone-Endora also benefits from the significant development of infrastructure and services already in place due to its location directly adjacent to the Venetia Mine.
Qualified Person Statement:
Mr. James P. Hawkins (B.Sc., P.Geo.), is Manager of Exploration & Special Projects for Diamcor Mining Inc., and the Qualified Person in accordance with National Instrument 43-101 responsible for overseeing the execution of Diamcor’s exploration programmes and a Member of the Association of Professional Engineers and Geoscientists of Alberta (“APEGA”). Mr. Hawkins has reviewed this press release and approved of its contents.
This press release contains certain forward-looking statements. While these forward-looking statements represent our best current judgement, they are subject to a variety of risks and uncertainties that are beyond the Company’s ability to control or predict and which could cause actual events or results to differ materially from those anticipated in such forward-looking statements. Further, the Company expressly disclaims any obligation to update any forward looking statements. Accordingly, readers should not place undue reliance on forward-looking statements.
WE SEEK SAFE HARBOUR
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Plan map of Kingsway Gold occurrences showing latest drill intersections.
Hole K-22-174 intersected 284.1 g/t Au over 0.58 metres from 309.47 metres and 15.05 g/t Au over 1.11 metres from 310.71.
The hole is the furthest hole drilled to the southwest at Big Vein and represents a 120 metre step out from previously reported mineralization at Big Vein.
Mineralization at Big Vein remains open along strike to the southwest and northeast.
Drilling also intersected high-grade mineralization at Golden Glove grading 20.07 g/t Au over 1 metre from 355m downhole and a longer 13.2 metre near surface interval at Midway grading 2.2 g/t Au that included 5.23 g/t Au over 4 metres.
TORONTO, July 07, 2022 (GLOBE NEWSWIRE) — Labrador Gold Corp. (TSX.V:LAB | OTCQX:NKOSF | FNR: 2N6) (“LabGold” or the “Company”) is pleased to announce a new high grade intercept from the drilling at the southwest end of the Big Vein Zone as well as updates on drilling at Golden Glove and Midway at its 100% owned Kingsway Project. These holes were drilled as part of the Company’s ongoing 100,000 metre diamond drilling program targeting the prospective Appleton Fault Zone over a 12km strike length.
Big Vein
Hole K-22-174 is the furthest hole to be drilled to the southwest at Big Vein and intersected 284.1g/t Au over 0.58m from 309.7m downhole and represents the highest grade yet intersected on the Kingsway project. The hole also intersected 15.05 g/t over 1.11m from 310.71m just below the high-grade intercept. The hole was collared 120m to the southwest of Hole K-22-122 that intersected 54.17 g/t over 0.95m (see news release dated May 5, 2022) and the mineralization remains open to the southwest.
Golden Glove
Hole K-22-154 intersected 20.07 g/t Au over 1m from 335m downhole. This hole was drilled to test for a down plunge extension of mineralization in hole K-22-150 that intersected 6.22 g/t Au over 4m from 348m including 10.31 g/t Au over 2m (see news release dated July 5, 2022).
Midway
Hole K-22-153 intersected gabbro hosted gold mineralization grading 2.2 g/t Au over 13.2m from 45m downhole (38m vertical) that included 5.23 g/t Au over 4m.
“It is exciting to find the highest-grade mineralization drilled at Kingsway, more than a year after drilling began, in the furthest hole drilled to the southwest at Big Vein. This suggests excellent potential for further high-grade mineralization as we continue drilling to the southwest and attests to the prospectivity of the Appleton Fault Zone in this area,” said Roger Moss, President and CEO. “High-grade mineralization intersected at Golden Glove down plunge from that found in the first hole is also encouraging, especially given that these holes are approximately 160m south of the discovery outcrop. We will continue to test the extent of this mineralization both down plunge and along strike. Drilling at Midway continues to demonstrate near surface gold mineralization in gabbro which is significant given the extent of gabbro at Kingsway. We expect to continue to successfully expand these three targets as well as to begin drilling new targets, such as our current drilling at CSAMT, in the months ahead.”
Hole ID
From
To
width
Au (g/t)
Zone
K-22-174
309.47
310.05
0.58
284.1
Big Vein SW
310.71
311.82
1.11
15.05
K-22-167
16
18
2
1.05
Big Vein
K-22-163
17
18
1
1.06
Big Vein
50
52
2
2.06
99
101
2
1.47
301
304
3
1.39
HTC
K-22-162
84
93
9
1.1
Pristine
108
109
1
2.33
K-22-161
67
68
1
1.62
Midway
K-22-159
275
276
1
1.02
Golden Glove
K-22-156
117
121
4
1.53
Pristine
K-22-155
156
157
1
1.13
Big Vein
163
164
1
1.54
K-22-154
242
245
3
1.95
Golden Glove
293
294
1
2.13
298
299
1
1.16
335
336
1
20.07
K-22-153
45
58
13
2.2
Midway
including
45
49
4
5.23
including
45
47
2
7.36
K-22-149
13
14
1
1.27
Pristine
K-22-146
57
57.95
0.95
1.12
Pristine
Table 1. Summary of assay results. All intersections are downhole length as there is insufficient Information to calculate true width.
True widths of the reported intersections have yet to be calculated. Assays are uncut. Samples of HQ split core are securely stored prior to shipping to Eastern Analytical Laboratory in Springdale, Newfoundland for assay. Eastern Analytical is an ISO/IEC17025 accredited laboratory. Samples are routinely analyzed for gold by standard 30g fire assay with atomic absorption finish as well as by ICP-OES for an additional 34 elements. Samples containing visible gold are assayed by metallic screen/fire assay, as are any samples with fire assay results greater than 1 g/t Au. The company submits blanks and certified reference standards at a rate of approximately 5% of the total samples in each batch.
Qualified Person
Roger Moss, PhD., P.Geo., President and CEO of LabGold, a Qualified Person in accordance with Canadian regulatory requirements as set out in NI 43-101, has read and approved the scientific and technical information that forms the basis for the disclosure contained in this release.
The Company gratefully acknowledges the Newfoundland and Labrador Ministry of Natural Resources’ Junior Exploration Assistance (JEA) Program for its financial support for exploration of the Kingsway property.
About Labrador Gold Labrador Gold is a Canadian based mineral exploration company focused on the acquisition and exploration of prospective gold projects in Eastern Canada.
Labrador Gold’s flagship property is the 100% owned Kingsway project in the Gander area of Newfoundland. The three licenses comprising the Kingsway project cover approximately 12km of the Appleton Fault Zone which is associated with gold occurrences in the region, including those of New Found Gold immediately to the south of Kingsway. Infrastructure in the area is excellent located just 18km from the town of Gander with road access to the project, nearby electricity and abundant local water. LabGold is drilling a projected 100,000 metres targeting high-grade epizonal gold mineralization along the Appleton Fault Zone with encouraging results. The Company has approximately $26.5 million in working capital and is well funded to carry out the planned program.
The Hopedale property covers much of the Florence Lake greenstone belt that stretches over 60 km. The belt is typical of greenstone belts around the world but has been underexplored by comparison. Work to date by Labrador Gold show gold anomalies in rocks, soils and lake sediments over a 3 kilometre section of the northern portion of the Florence Lake greenstone belt in the vicinity of the known Thurber Dog gold showing where grab samples assayed up to 7.8 g/t gold. In addition, anomalous gold in soil and lake sediment samples occur over approximately 40 km along the southern section of the greenstone belt (see news release dated January 25th 2018 for more details). Labrador Gold now controls approximately 40km strike length of the Florence Lake Greenstone Belt.
The Company has 168,889,979 common shares issued and outstanding and trades on the TSX Venture Exchange under the symbol LAB.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Forward-Looking Statements: This news release contains forward-looking statements that involve risks and uncertainties, which may cause actual results to differ materially from the statements made. When used in this document, the words “may”, “would”, “could”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” and similar expressions are intended to identify forward-looking statements. Such statements reflect our current views with respect to future events and are subject to risks and uncertainties. Many factors could cause our actual results to differ materially from the statements made, including those factors discussed in filings made by us with the Canadian securities regulatory authorities. Should one or more of these risks and uncertainties, such as actual results of current exploration programs, the general risks associated with the mining industry, the price of gold and other metals, currency and interest rate fluctuations, increased competition and general economic and market factors, occur or should assumptions underlying the forward looking statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, or expected. We do not intend and do not assume any obligation to update these forward-looking statements, except as required by law. Shareholders are cautioned not to put undue reliance on such forward-looking statements.
Vancouver, British Columbia–(Newsfile Corp. – July 7, 2022) – Goldshore Resources Inc. (TSXV: GSHR) (OTCQB: GSHRF) (FSE: 8X00) (“Goldshore” or the “Company“), is pleased to announce it has executed an option agreement (the “Option Agreement“) with White Metal Resource Corp. (“White Metal“) to earn in to certain mining claims held by White Metal in the Shebandowan greenstone belt known as the Iris Lake and Vanguard properties (the “Property” or “Properties“).
Key Terms of the Option Agreement
Total cash payments (CAD$) of an aggregate of $110,000 to White Metal over 3 years, to be paid as follows:
$10,000 within five days of July 6, 2022 (the “Effective Date“);
an additional $20,000 on or before the 12-month anniversary of the Effective Date;
an additional $30,000 on or before the 24-month anniversary of the Effective Date; and
an additional $50,000 on or before the 36-month anniversary of the Effective Date;
Total share issuance of an aggregate of 1,500,000 common shares of the Company (each, a “Share“) (such Shares to be subject to resale restrictions) as follows:
300,000 Shares within five days of the Effective Date;
an additional 300,000 Shares on or before the 12-month anniversary of the Effective Date;
an additional 400,000 Shares on or before the 24-month anniversary of the Effective date; and
an additional 500,000 Shares on or before the 36-month anniversary of the Effective Date;
Total incurred expenditures on the Property of not less than $1,650,000 over 3 years as follows:
$100,000 on or before the six-month anniversary of the Effective Date;
an additional $200,000 on or before the 12-month anniversary of the Effective Date;
an additional $600,000 on or before the 24-month anniversary of the Effective Date; and
an additional $750,000 on or before the 36-month anniversary of the Effective Date.
Other non-material administrative and technical matters guiding the earn in relationship between the Company and White Metal.
President and CEO, Brett Richards, stated: “We are excited to add on this land package through the Option Agreement with White Metal. As illustrated in Figure 1.0, the Properties are adjacent to our north-eastern property claims in the Coldstream and Iris Lake area. As we have suggested in the past, and with the interpretation of the airborne geo-physical VTEM survey conducted in 2021; there is a strong correlation through Coldstream and Iris Lake towards the Properties, that suggest this strike length is contiguous.”
Figure 1 – The White Metal Resources Corp Iris Lake and Vanguard properties
Goldshore has decided to temporarily scale back its drilling program from 7 rigs to 2 rigs in an effort to preserve capital in this uncertain and volatile capital market environment. The Company has also evaluated all possible cost containment and cost control measures to assist in this regard, and are reducing costs wherever possible. This decision to slow drilling production may affect Goldshore’s ability to complete its planned 100,000m drill program in 2022, as previously planned, but does not change the strategy or management’s view on the Moss Lake Project. The Company will continue to monitor all market conditions, as well as its ability to execute on its objectives going forward.
About Goldshore
Goldshore is an emerging junior gold development company, and owns the Moss Lake Gold Project located in Ontario. Wesdome is currently a strategic shareholder of Goldshore with an approximate 27% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Lake Gold Project through the next stages of exploration and development.
About the Moss Lake Gold Project
The Moss Lake Gold Project is located approximately 100 km west of the city of Thunder Bay, Ontario. It is accessed via Highway 11 which passes within 1 km of the property boundary to the north. The Moss Lake Gold Project covers 14,292 hectares and consists of 282 unpatented and patented mining claims.
Moss Lake hosts a number of gold and base metal rich deposits including the Moss Lake Deposit, the East Coldstream Deposit (Table 1), the historically producing North Coldstream Mine (Table 2), and the Hamlin Zone, all of which occur over a mineralized trend exceeding 20 km in length. A historical preliminary economic assessment was completed on Moss Lake in 2013 and published by Moss Lake Gold1. A historical mineral resource estimate was completed on the East Coldstream Deposit in 2011 by Foundation Resources Inc2,3. In addition to these zones, the Moss Lake Gold Project also hosts a number of under-explored mineral occurrences which are reported to exist both at surface and in historically drilled holes. The Moss Lake Deposit is a shear-hosted disseminated-style gold deposit which outcrops at surface. It has been drilled over a 2.5 km length and to depths of 300 m with 376 holes completed between 1983 and 2017. The last drilling program conducted in 2016 and 2017 by Wesdome, which consisted of widely spaced holes along the strike extension of the deposit was successful in expanding the mineralized footprint and hydrothermal system 1.6 km to the northeast. Additionally, the deposit remains largely open to depth. In 2017, Wesdome completed an induced polarization survey which traced the potential extensions of pyrite mineralization associated with the Moss Lake Deposit over a total strike length of 8 km and spanning the entire extent of the survey grids.
The East Coldstream Deposit is a shear-hosted disseminated-style gold deposit which locally outcrops at surface. It has been drilled over a 1.3 km length and to depths of 200 m with 138 holes completed between 1988 and 2017. The deposit remains largely open at depth and may have the potential for expansion along strike. Historic drill hole highlights from the East Coldstream Deposit include 4.86 g/t Au over 27.3 m in C-10-15.
The historically producing North Coldstream Mine is reported to have produced significant amounts of copper, gold and silver4 from mineralization with potential iron-oxide-copper-gold deposit style affinity. The exploration potential immediately surrounding the historic mining area is not currently well understood and historic data compilation is required.
The Hamlin Zone is a significant occurrence of copper and gold mineralization, and also of potential iron-oxide-copper-gold deposit style affinity. Between 2008 and 2011, Glencore tested Hamlin with 24 drill holes which successfully outlined a broad and intermittently mineralized zone over a strike length of 900 m. Historic drill hole highlights from the Hamlin Zone include 0.9 g/t Au and 0.35% Cu over 150.7 m in HAM-11-75.
The Moss Lake, East Coldstream and North Coldstream deposits sit on a mineral trend marked by a regionally significant deformation zone locally referred to as the Wawiag Fault Zone in the area of the Moss Lake Deposit. This deformation zone occurs over a length of approximately 20 km on the Moss Lake Gold Project and there is an area spanning approximately 7 km between the Moss Lake and East Coldstream deposits that is significantly underexplored.
Table 1: Historical Mineral Resources1,2,3
INDICATED
INFERRED
Deposit
Tonnes
Au g/t
Au oz
Tonnes
Au g/t
Au oz
Moss Lake Deposit1 (2013 resource estimate)
Open Pit Potential
39,795,000
1.1
1,377,300
48,904,000
1.0
1,616,300
Underground Potential
–
–
–
1,461,100
2.9
135,400
Moss Lake Total
39,795,000
1.1
1,377,300
50,364,000
1.1
1,751,600
East Coldstream Deposit2 (2011 resource estimate)
East Coldstream Total
3,516,700
0.85
96,400
30,533,000
0.78
763,276
Combined Total
43,311,700
1.08
1,473,700
80,897,000
0.98
2,514,876
Notes:
(1) Source: Poirier, S., Patrick, G.A., Richard, P.L., and Palich, J., 2013. Technical Report and Preliminary Economic Assessment for the Moss Lake Project, 43-101 technical report prepared for Moss Lake Gold Mines Ltd. Moss Lake Deposit resource estimate is based on 0.5 g/t Au cut-off grade for open pit and 2.0 g/t Au cut-off grade for underground resources.
(2) Source: McCracken, T., 2011. Technical Report and Resource Estimate on the Osmani Gold Deposit, Coldstream Property, Northwestern Ontario, 43-101 technical report prepared for Foundation Resources Inc. and Alto Ventures Ltd. East Coldstream Deposit resource estimate is based on a 0.4 g/t Au cut-off grade.
(3) The reader is cautioned that the above referenced “historical mineral resource” estimates are considered historical in nature and as such is based on prior data and reports prepared by previous property owners. A qualified person has not done sufficient work to classify the historical estimates as current resources and Goldshore is not treating the historical estimates as current resources. Significant data compilation, re-drilling, re-sampling and data verification may be required by a qualified person before the historical estimate on the Moss Lake Gold Project can be classified as a current resource. There can be no assurance that any of the historical mineral resources, in whole or in part, will ever become economically viable. In addition, mineral resources are not mineral reserves and do not have demonstrated economic viability. Even if classified as a current resource, there is no certainty as to whether further exploration will result in any inferred mineral resources being upgraded to an indicated or measured mineral resource category.
Table 2: Reported Historical Production from the North Coldstream Deposit4
Deposit
Tonnes
Cu %
Au g/t
Ag
Cu lbs
Au oz
Ag oz
Historical Production
2,700,0000
1.89
0.56
5.59
102,000,000
44,000
440,000
Note:
(4) Source: Schlanka, R., 1969. Copper, Nickel, Lead and Zinc Deposits of Ontario, Mineral Resources Circular No. 12, Ontario Geological Survey, pp. 314-316.
Peter Flindell, MAusIMM, MAIG, Vice President – Exploration of the Company, a qualified person under NI 43-101 has approved the scientific and technical information contained in this news release.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.
For More Information – Please Contact:
Brett A. Richards President, Chief Executive Officer and Director Goldshore Resources Inc.
This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur.
Forward-looking statements in this news release include, among others, statements relating to expectations regarding the exploration and development of the Moss Lake Gold Project or the Properties, an update to the historical resource at the Moss Lake Gold Project, and other statements that are not historical facts. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors and risks include, among others: the Company may require additional financing from time to time in order to continue its operations which may not be available when needed or on acceptable terms and conditions acceptable; compliance with extensive government regulation; domestic and foreign laws and regulations could adversely affect the Company’s business and results of operations; the stock markets have experienced volatility that often has been unrelated to the performance of companies and these fluctuations may adversely affect the price of the Company’s securities, regardless of its operating performance; and the impact of COVID-19.
The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. The Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.
Vancouver, British Columbia–(Newsfile Corp. – July 6, 2022) – EMX Royalty Corporation (NYSE American: EMX) (TSXV: EMX; (FSE: 6E9) (the “Company” or “EMX”) is pleased to announce that it has repaid in full the US$7.85 million vendor take back note issued to SSR Mining Inc. (“SSR Mining“) on October 21, 2021 (see EMX news release dated October 21, 2021 (referred to therein as the “VTB Note“)).
To facilitate the acquisition of a portfolio of royalty interests and deferred payments from SSR Mining and certain of its subsidiaries (see EMX news release dated October 21, 2021), the Company borrowed US$7.85 million from SSR Mining pursuant to the VTB Note. The total repayment made by the Company under the VTB Note, including all principal and interest, was US$8.36 million.
About EMX. EMX is a precious, base and battery metals royalty company. EMX’s investors are provided with discovery, development, and commodity price optionality, while limiting exposure to risks inherent to operating companies. The Company’s common shares are listed on the NYSE American Exchange and TSX Venture Exchange under the symbol “EMX”, and also trade on the Frankfurt exchange under the symbol “6E9”. Please see www.EMXroyalty.com for more information.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release
Forward-Looking Statements
This news release may contain “forward-looking statements” that reflect the Company’s current expectations and projections about its future results. These forward-looking statements may include statements regarding perceived merit of properties, exploration results and budgets, mineral reserves and resource estimates, work programs, capital expenditures, timelines, strategic plans, market prices for precious and base metal, or other statements that are not statements of fact. When used in this news release, words such as “estimate,” “intend,” “expect,” “anticipate,” “will”, “believe”, “potential” and similar expressions are intended to identify forward-looking statements, which, by their very nature, are not guarantees of the Company’s future operational or financial performance, and are subject to risks and uncertainties and other factors that could cause the Company’s actual results, performance, prospects or opportunities to differ materially from those expressed in, or implied by, these forward-looking statements. These risks, uncertainties and factors may include, but are not limited to unavailability of financing, failure to identify commercially viable mineral reserves, fluctuations in the market valuation for commodities, difficulties in obtaining required approvals for the development of a mineral project, increased regulatory compliance costs, expectations of project funding by joint venture partners and other factors.
Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this news release or as of the date otherwise specifically indicated herein. Due to risks and uncertainties, including the risks and uncertainties identified in this news release, and other risk factors and forward-looking statements listed in the Company’s MD&A for the quarter ended March 31, 2022 (the “MD&A”), and themost recently filed Annual Information Form (“AIF”) for the year ended December 31, 2021, actual events may differ materially from current expectations. More information about the Company, including the MD&A, the AIF and financial statements of the Company, is available on SEDAR at www.sedar.com and on the SEC’s EDGAR website at www.sec.gov.
Plan View of the Guayabales Project Highlighting the Apollo Target
Figure 2:
Plan View of the Apollo Target Area Outlining the Porphyry and Breccia Targets, their Related Soil Anomalies and Drill Holes Completed or Currently Underway
Figure 3:
Plan View of the Hydrothermal Breccia Discovery Made at Apollo highlighting APC-2
Figure 4:
Apollo Target Cross Section NE-SW With APC-2 mineralized interval and position relative to APC-1. Related Core Photos Highlighted
TORONTO, July 06, 2022 (GLOBE NEWSWIRE) — Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce visual observations from the third completed drill hole at the Apollo target (“Apollo”). Apollo is a newly discovered high-grade copper-gold-silver porphyry-related breccia and the Company recently announced the assay results for the discovery hole (APC-1), which intersected 87.8 metres @ 2.49 g/t AuEq. Apollo is one of eight porphyry-related targets situated within a three-by-four-kilometre cluster area generated by the Company through grassroots exploration at the Guayabales project, located in Caldas, Colombia. As part of its fully funded 20,000-metre drill program for 2022, there are currently three diamond drill rigs operating at Guayabales, with two turning at Apollo and one turning at the Trap target.
Highlights (See Figures 1 – 4)
APC-2, which was drilled to the southwest from a drill pad located 200 metres southeast of the collars for APC-1 and APC-1W,intercepted over 200 metres of mineralized breccia from 154.7 metres downhole (100 metres vertical). Core from this hole and APC-1W have been sent to the lab as a batch and assay results are expected shortly.
Mineralization is remarkably continuous along the axis of the intercept of interest in APC-2 and is hosted within a breccia sulphide matrix consisting of chalcopyrite (Cu), pyrite and pyrrhotite. Additionally, overprinting carbonate base metal (“CBM”) veins flood the breccia matrix in various locations along the mineralized interval in APC-2 with visible sphalerite (Zn) and Galena (Pb) observed. The breccia clasts are all quartz diorite in composition and this hydrothermal system is clearly linked to a porphyry system. The mineralization in APC-2 is remarkably consistent with the mineralization observed in APC-1 and APC-1W (refer to press releases dated April 27, 2022 and June 22, 2022 for further details).
APC-2 extends this mineralized system at least 200 metres to the northeast and 100 metres to the southwest and is located centrally within the 800 metre X 700 metre Apollo targetarea. The Company is currently drilling two additional holes, APC-3 and APC-4, which aims to expand the mineralized system and better understand the morphology of this new discovery.
Apollo remains open to the east, west, south and at depth for further expansion. Due to the size of the target area and success in early drilling, a fourth drill pad is now under construction.
The Apollo target area consists of newly generated porphyry and porphyry related breccia and vein targets with coincidental high-grade copper and molybdenum soil anomalies in places measuring greater than 500 parts per million (“ppm”) in copper and 30 ppm in molybdenum. Additionally, surface sampling at Apollo has uncovered a series of high-grade gold outcrops with numerous rock samples assaying greater than 3 g/t gold.
Apollo is road accessible all year-round and is situated within an elevation range of 1,800 to 2,000 metres above sea level. Additionally, an electrical substation is located less than one kilometre from the target area.
“At more than 200 metres in length and with at least three distinct overprinting types of mineralization observed, APC-2 is a nice surprise and has the potential to provide another high-grade intercept of bulk-style mineralization. Although we are at an early stage in understanding Apollo, the target is clearly demonstrating excellent potential to ultimately evolve into a large mineralized system. We will continue to be aggressive in drilling Apollo at various orientations and dips in order to learn the geometry of the system and unlock the potential of this very exciting new discovery,” commented Ari Sussman, Executive Chairman.
The Company also announces that at the annual special meeting of shareholders of the Company held on June 29, 2022, the Company’s 10% “rolling” stock option plan (“Plan”) was re-approved by shareholders in accordance with the policies of the TSX Venture Exchange (“TSXV”). The newly approved Plan also reflected certain house-keeping amendments to ensure compliance with the new Policy 4.4 of the Exchange which came into effect on November 24, 2021.
Collective Mining is an exploration and development company focused on identifying and exploring prospective mineral projects in South America. Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, the mission of the Company is to repeat its past success in Colombia by making significant new mineral discoveries and advance the projects to production. Management, insiders and close family and friends own nearly 45% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. Collective currently holds an option to earn up to a 100% interest in two projects located in Colombia. As a result of an aggressive exploration program on both the Guayabales and San Antonio projects, a total of eight major targets have been defined. The Company is fortuitous to have made significant grassroot discoveries at both projects with near-surface discovery holes at the Guayabales project yielding 302 metres at 1.11 g/t AuEq at the Olympus target, 163 metres at 1.3 g/t AuEq at the Donut target and 87.8 metres at 2.49 g/t AuEg at the Apollo target. At the San Antonio project, the Company intersected, from surface, 710 metres at 0.53 AuEq. (See press releases dated October 27th, 2021, November 15, 2021, March 15, 2022 and June 22, 2022 for AuEq calculations.)
Qualified Person (QP) and NI43-101 Disclosure
David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).
Technical Information
Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.
Contact Information
Collective Mining Ltd. Steve Gold, Vice President, Corporate Development and Investor Relations Tel. (416) 648-4065
FORWARD-LOOKING STATEMENTS
This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.
Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.
Burlington, Ontario–(Newsfile Corp. – July 5, 2022) – Silver Bullet Mines Corp. (TSXV: SBMI) (OTCQB: SBMCF) (“SBMI” or “the Company”) announces it has successfully completed commissioning of its wholly owned 125 MTPD state of the art mill near Globe, Arizona. This is the latest major achievement in progressing towards bulk sampling and silver production.
Despite minor delays caused by COVID-19, the commissioning was successfully completed on July 3, 2022. Over the past few weeks all equipment at the mill was test run and synchronized for continuity. No material defects or deficiencies were detected.
“In September of 2021 this was an empty field,” said A. John Carter, SBMI’s CEO. “Now this field hosts a fully functional silver processing facility, ready to start processing a bulk sample of ore from our Buckeye Silver Mine. This could not have been achieved without the incredible skill and dedication of the technical team in Arizona.”
SBMI has commenced crushing ore through the crushing circuit (see video at https://youtu.be/KvhAhqABV74) and is filling the fine ore bin. The photo on the left below shows coarse ore from the Company’s local Buckeye Silver Mine and the photo on the right shows crushed ore in the fine ore bin. The cone crusher and jaw crusher successfully crushed the ore to less than ½ inch in diameter, which is ideal feed for the ball mill.
The next step on the path to producing concentrate and dore bars is to start running the fine ore through the grinding and gravity circuit. This will require a ramp-up period until all equipment is running at maximum efficiency.
Samples are being sent to multiple companies which have expressed an interest in buying SBMI’s concentrate and dore.
This is yet another giant leap forward for the Company. SBMI is on the cusp of producing both silver and copper and generating cash flow which will enable it to continue to execute on its business plan.
John Carter Silver Bullet Mines Corp., CEO cartera@sympatico.ca +1 (905) 302-3843
Peter M. Clausi Silver Bullet Mines Corp., VP Capital Markets pclausi@brantcapital.ca +1 (416) 890-1232
Cautionary and Forward-Looking Statements
Silver Bullet Mines Corp. trades on the TSX Venture Exchange under the symbol SBMI and on the OTCQB Venture Market under the symbol SBMCF. The OTCQB Venture Market is for early stage and developing U.S. and international companies. Companies listed there are current in their reporting and undergo an annual verification and management certification process. Investors can find current financial disclosure for the Company on www.otcmarkets.com and at https://money.tmx.com/en/quote/SBMI.
This news release contains certain statements that constitute forward-looking statements as they relate to SBMI and its subsidiaries. Forward-looking statements are not historical facts but represent management’s current expectation of future events, and can be identified by words such as “believe”, “expects”, “will”, “intends”, “plans”, “projects”, “anticipates”, “estimates”, “continues” and similar expressions. Although management believes that the expectations represented in such forward-looking statements are reasonable, there can be no assurance that they will prove to be correct.
By their nature, forward-looking statements include assumptions, and are subject to inherent risks and uncertainties that could cause actual future results, conditions, actions or events to differ materially from those in the forward-looking statements. If and when forward-looking statements are set out in this new release, SBMI will also set out the material risk factors or assumptions used to develop the forward-looking statements. Except as expressly required by applicable securities laws, SBMI assumes no obligation to update or revise any forward-looking statements. The future outcomes that relate to forward-looking statements may be influenced by many factors, including but not limited to: the impact of SARS CoV-2 or any other global virus; reliance on key personnel; the availability of skilled and unskilled labour; the presence and recoverability of mineralization; ongoing availability of infrastructure such as electrical, diesel and road access; the thoroughness of its QA/QA procedures; the continuity of the global supply chain for materials for SBMI to use in the production and processing of ore; shareholder, permitting and regulatory approvals; activities and attitudes of communities local to the location of SBMI’s properties; price increases related to supply chain issues; risks of future legal proceedings; income tax matters; fires, floods and other natural phenomena; the rate of inflation; availability and terms of financing; distribution of securities; commodities pricing; currency movements, especially as between the USD and CDN; effect of market interest rates on price of securities; and, potential dilution. SARS CoV-2 and other potential global viruses create risks that at this time are immeasurable and impossible to define.
