Locality map for Novo’s Egina project in the Pilbara region of Western Australia.
Locality map for Novo’s Egina project in the Pilbara region of Western Australia.
Figure 2
Novo tenure (green) in the northern Egina project showing interpreted intrusive targets (red polygons) generated from aeromagnetic data (greyscale 1VD northern Pilbara mosaic). De Grey tenure in yellow.
Novo tenure (green) in the northern Egina project showing interpreted intrusive targets (red polygons) generated from aeromagnetic data (greyscale 1VD northern Pilbara mosaic). De Grey tenure in yellow.
Figure 3
Significant and coherent As-in-soils anomaly (>2km total strike length) in the northern part of E47/3673 with historical RAB drilling.
Significant and coherent As-in-soils anomaly (>2km total strike length) in the northern part of E47/3673 with historical RAB drilling.
HIGHLIGHTS
Novo has identified multiple discrete untested aeromagnetic anomalies with magnetic characteristics comparable to the “Hemi-style” gold-bearing sanukitoid intrusions being developed by De Grey Mining Ltd. (“De Grey”) (ASX: DEG).
Novo’s extensive Pilbara land package includes 216 km2 of highly prospective yet under-explored Mallina Basin geology across a significant NE trending mineralized corridor potentially extending to De Grey’s Hemi gold discovery (Figure 1).
Review of historical exploration has defined two large (> 1 km strike) coincident high-order Au-As-Sb soil anomalies along the structural corridor in the vicinity of the Becher epithermal system.
Reconnaissance drilling undertaken by another issuer in 1997 (20 x 200 m) within the Au-As-Sb anomalous zones intersected up to 4.38 g/t Au. This information has not been verified by Novo and is not necessarily representative of mineralization throughout the Egina project.
Exploration planned for early 2022 includes high-resolution aeromagnetics, regolith and basement mapping, grid soil sampling and drilling to test these priority targets.
VANCOUVER, British Columbia, Nov. 04, 2021 (GLOBE NEWSWIRE) — Novo Resources Corp. (“Novo” or the “Company”) (TSX: NVO, NVO.WT & NVO.WT.A) (OTCQX: NSRPF) is pleased to announce that it has identified a series of new targets in the northern sector of the Egina project centred on exploration licence 47/3673 (Figure 2). These newly identified targets are located within a broad NE-trending structural corridor which forms part of a network of shear zones and sanukitoid intrusive centres that host De Grey’s recent Hemi discovery1. Hemi is one of Australia’s recent major gold discoveries, hidden under 20 to 30 m of transported cover.
The new targets include multiple discrete magnetic targets identified from detailed aeromagnetic interpretation, interpreted to represent potential intrusive bodies under cover, and extensive Au-As-Sb soil anomalies in the vicinity of the epithermal vein system at Becher.
Exploration licence 47/3673 has few outcrops (approximately 10% of the tenement contains outcrop and subcrop) and is essentially covered by colluvial and alluvial material, calcrete and several ridges of aeolian sand dunes. The large (> 1 km long) coincident Au-As-Sb soil geochemical anomalies are restricted to areas of weathered outcrop and subcrop only, and thus the bedrock targets remain open under transported cover for several kilometres to the WSW and ENE.
Previous reconnaissance inclined rotary air blast (“RAB”) drilling by Resolute Mining Limited (“Resolute”) (ASX: RSG) in 1997 across the northern Becher Au-As-Sb anomaly yielded encouraging results including multiple gold assays of greater than 1 g/t Au (Figure 3) including:
3m @ 3.68 g/t Au from 25m (LGRB306) including 1m @ 4.38 g/t Au from 25m
1m @ 1.04 g/t Au from 30m (LGRB294)
1m @ 1.63 g/t Au from 26m (LGRB299)
2m @ 1.09 g/t Au from 32m (LGRB300)
Table 1 below provides a list of location information plus significant intersections from RAB drilling.
This historical data was disclosed in annual exploration reports (“Reports”) filed by Resolute on the Western Australian Department of Mines, Industry Regulation and Safety’s (“DMIRS”) website in 1997. The technical information contained in Table 1 has been extracted from the Reports. Reference should be made to the Reports which are available on DMIRS’ website (https://geodocs.dmirs.wa.gov.au/Web/documentlist/10/Report_Ref/A55647).
A qualified person has not verified the technical information contained in the Reports, and Novo is unaware of the existence of any technical report prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects or the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves in connection with the technical information contained in the Reports. Novo is unable to comment on the reliability of the technical information contained in the Reports and therefore, reliance should not be placed on such technical information.
“Novo’s exploration team has been diligently reviewing the northern portion of its Egina land holdings for prospectivity for Hemi-type discoveries,” commented Dr. Quinton Hennigh, Non-Executive Co-Chairman and a director of Novo. “Numerous potential intrusive centers resembling sanukitoids like those at Hemi exist along a NE trending corridor extending from Novo’s tenure to Hemi. At Becher, a coincident Au-As-Sb soil anomaly is associated with an interpreted cluster of such intrusions. Novo plans to undertake high-resolution aeromagnetics, regolith and basement mapping and grid soil sampling in preparation for drilling in 2022.”
Historical data analysis is ongoing at Egina, with further geophysical and structural interpretation to aid in drill targeting to be completed early in 2022. Drilling is planned to test intrusive targets defined by high-resolution aeromagnetics, the extensive, coincident Au-As-Sb soil anomalies at Becher and targets defined by historic RAB drilling.
Gold analyses from drilling programs will be completed by PhotonAssay through the Intertek Laboratory in Perth, where Novo are currently receiving 7 – 9 day turnaround times for gold assay.
QP STATEMENT
Dr. Quinton Hennigh (P.Geo.) is the qualified person, as defined under National Instrument 43-101 Standards of Disclosure for Mineral Projects, responsible for, and having reviewed and approved, the technical information contained in this news release other than the technical information extracted from the Reports. Dr. Hennigh is the non-executive co-chairman and a director of Novo.
About Novo
Novo operates its flagship Beatons Creek gold project while exploring and developing its prospective land package covering approximately 13,250 square kilometres in the Pilbara region of Western Australia. In addition to the Company’s primary focus, Novo seeks to leverage its internal geological expertise to deliver value-accretive opportunities to its shareholders. For more information, please contact Leo Karabelas at (416) 543-3120 or e-mail leo@novoresources.com.
On Behalf of the Board of Directors,
Novo Resources Corp.
“Michael Spreadborough”
Michael Spreadborough
Executive Co-Chairman
Forward-looking information
Some statements in this news release contain forward-looking information (within the meaning of Canadian securities legislation) including, without limitation, planned exploration activities and the expected timing of receipt of assay results. These statements address future events and conditions and, as such, involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the statements. Such factors include, without limitation, customary risks of the resource industry and the risk factors identified in Novo’s management’s discussion and analysis for the six months ended June 30, 2021, which is available under Novo’s profile on SEDAR at www.sedar.com. Forward-looking statements speak only as of the date those statements are made. Except as required by applicable law, Novo assumes no obligation to update or to publicly announce the results of any change to any forward-looking statement contained or incorporated by reference herein to reflect actual results, future events or developments, changes in assumptions or changes in other factors affecting the forward-looking statements. If Novo updates any forward-looking statement(s), no inference should be drawn that the Company will make additional updates with respect to those or other forward-looking statements.
Analytic Methodology (as set out in the Reports) Soil samples were taken as 2kg samples sieved to -2mm fraction and submitted to Genalysis Laboratory Services, Perth, for the following analysis:
Au (B/ETA 1 ppb)
Cu (B/AAS 1 ppm)
As (B/AAS 5 ppm)
Sb (B/ AAS 1 ppm)
Original 4m RAB composites were sampled using a PVC spear and sent to Genalysis Laboratory Services, Perth for the following analysis:
Au (B/AAS 0.01 ppm)
As (B/AAS 5 ppm)
Sb (B/AAS 1 ppm)
Cu (B/AAS 1 ppm)
Follow-up RAB intervals were taken as single metre splits from the 4m composites and submitted to Analabs, Welshpool for gold (fire assay 0.01 ppm).
Table 1: Significant intercept table for historical single metre split RAB results.
Vancouver, British Columbia – (November 4, 2021) – Rover Metals Corp. (TSXV: ROVR) (OTCQB: ROVMF) (“Rover” or the “Company”) is pleased to announce a non-brokered flow-through unit financing (the “Units”) for $200,000. Each Unit is priced at $0.08 and is comprised of one common share and one-half (1/2) of a common share purchase warrant (the “$0.08 FT Unit Financing”). The warrants have an exercise price of $0.12 per warrant share, and a life of two years. Rover is also pleased to announce that the financing is now fully subscribed and that it has received permission from the Toronto Venture Exchange (the “TSXV”) to close, as of the date hereof. There will be 2,500,000 common shares and 1,250,000 common share purchase warrants issued in connection with this financing. There will be the standard 4-month regulatory hold period for both the common shares and the common share purchase warrants in connection with this financing. No financing fees have been paid in connection with this financing.
Closing of the $0.08 FT Unit Financing Legendary junior mining investor, Tookie Angus, has purchased 100% of the $0.08 FT Unit Financing allocation, adding to his existing position in the Company.
Use of Proceeds The use of proceeds of the financing will be for Phase 3 Winter Exploration activities at the Cabin Gold Project. Starting this month, the Company will begin building the ice drill pads on Cabin Lake needed for follow-up drilling at the Arrow Zone. In Q4-2020, the Company reported an intersection of 32 meters of continuous gold averaging 13.6 grams per ton Au from the Arrow Zone. The Arrow Zone remains open at depth, underneath Cabin Lake, and is only accessible for expansion drilling in the winter months. The release of the map location of the ice drill pads will be part of a future updating news release.
Update on Timing of Summer 2021 Phase 2 Exploration Results COVID-19 logistic delays at the testing laboratories continue to cause delays in the reporting process for junior miners. Rover expects to have a news release out next week with an update on the timing of the release dates of its Summer Phase 2 Exploration Results.
About the Cabin Gold Project In September 2020, Rover kicked-off its first exploration drilling program at the historic Cabin Gold Project. The exploration program included both confirmation and expansion drilling of historical high grade gold drill intercepts in the “Arrow Zone” area of the historic Bugow Iron Formation. The Bugow Iron Formation is the controlling structure for the gold mineralization on the property and is over 15 km in at or near surface length. Rover’s 2020 expansion drilling included the discovery of what it believes to be a primary gold bearing ore shoot at the Arrow Zone. Rover’s 2020 drill program was the initial step towards confirming and expanding the historic 100,000 tons at 0.30 Oz/ton Au* historic resource estimate, reported for the Arrow Zone, towards a NI 43-101 compliant mineral resource estimate.
In July 2021, Rover commenced a Phase 2 Exploration Program at the Cabin Gold Project. The goal of the Phase 2 Exploration Program was the discovery and definition of new, near surface, gold bearing zones along the Bugow Iron Formation. The Company focussed on five known historic targets areas: (1) the Beaver; (2) the Andrew South; (3) the Andrew North; (4) the Camp South; and (5) Camp North. As of the date hereof, the Company is still waiting on results of its summer exploration program. Any new discoveries will form part of the Company’s Phase 3 Winter Exploration Program slated to begin in Q1-2022.
(*) As per Section 2.4 of NI 43-101, Aber Resources Ltd. reported a mineral inventory (that does not compare to the current CIM Definitions Standards mineral resource categories) of 100,000 tons at 0.30 ounces per ton gold at the Cabin Lake Gold Zone on the north limb of the folded Bugow Iron Formation in their 1986 and 1987 annual reports. The parameters used for the resource calculation are unknown. These results are relevant as to delineate a larger zone of gold mineralization at the Cabin Lake Gold Zone, but further drilling is needed to bring that up to CIM Definition Standards. The reader is cautioned that a Qualified Person has not done sufficient work to classify the historical estimates as current mineral resources and Rover Metals is not treating the historical estimates as current mineral resources. Technical information in this news release has been approved by Raul Sanabria, M.Sc., P.Geo., Technical Advisor and shareholder of Rover Metals Corp. and a Qualified Person for the purposes of National Instrument 43-101.
About Rover Metals Rover is a precious metals exploration company specialized in North American precious metal resources, that is currently advancing the gold potential of its existing projects in the Northwest Territories of Canada (60th parallel). The Company commenced Phase 2 Exploration at its Cabin Gold Project in the summer of 2021, and is planning to commence Phase 3 Exploration in Q1-2022.
ON BEHALF OF THE BOARD OF DIRECTORS “Judson Culter” Chief Executive Officer and Director
For further information, please contact: Email: info@rovermetals.com Phone: +1 (778) 754-2617
Statement Regarding Forward-Looking Information This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause Rover’s actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur. There can be no assurance that such statements be prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements, and readers are cautioned not to place undue reliance on these forward-looking statements. Any factor could cause actual results to differ materially from Rover’s expectations. Rover undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.
THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE REPRESENTS THE EXPECTATIONS OF THE COMPANY AS OF THE DATE OF THIS NEWS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE COMPANY MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE LAWS.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OF THIS RELEASE.
TORONTO, Nov. 04, 2021 (GLOBE NEWSWIRE) — Labrador Gold Corp. (TSX.V:LAB | OTCQX:NKOSF | FNR: 2N6) (“LabGold” or the “Company”) is pleased to announce further high-grade intercepts of near surface gold mineralization along the Appleton Fault Zone at its 100% controlled Kingsway project near Gander, Newfoundland. These holes were drilled as part of the Company’s ongoing 50,000 metre drill program. The Kingsway project is located in the highly prospective central Newfoundland gold belt.
Two holes K-21-28 and -79 both contained high-grade intervals. Hole K-21-28 intersected 76.24 g/t Au over 0.5m from 175 metres and Hole K-21-79 intersected 32.53 g/t Au over 0.8m from 162.55m, both in the HTC Zone. In addition, Hole K-21-58 intersected 7.25g/t Au over 1m from 161m in a newly defined mineralized zone in the footwall to the HTC Zone. This HTC Footwall Zone is also defined by previously released intersections of 128.51g/t Au over 1.12m in Hole K-21-47 and 11.68g/t Au over 0.91m in Hole K-21-11 as shown in Figure 1. A summary of the high-grade intersections, as well as other holes with assays recently received, are given in Table 1.
“We continue to find high-grade gold mineralization down plunge in the HTC Zone. The zone has now been tested to approximately 200 metres vertically and remains open at depth,” said Roger Moss, President and CEO of the Company. “We are also pleased to confirm a third mineralized zone in the footwall to the HTC Zone. We suspected the existence of this footwall zone for a while, but it has now shown sufficient continuity to call it a separate zone. This clearly shows the potential for multiple high-grade mineralized zones at the Big Vein target. Drilling to delineate the footwall zone and to test the down plunge extension of the HTC Zone is ongoing.”
Hole ID
From (m)
To (m)
Width (m)
Au (g/t)
Zone
K-21-28
175
175.5
0.5
76.24
HTC
K-21-50
5.2
7
1.8
1.72
Big Vein
and
12
13
1
1.47
K-21-52
7.5
12
4.5
1.9
Big Vein
including
11
12
1
5.4
K-21-56
99
100
1
1.08
HTC
and
108
109
1
1.76
and
112
113
1
1.27
and
220
221
1
1.42
HTC Footwall
and
225
226
1
2.38
K-21-57
41
44
3
1.35
Big Vein
K-21-58
16
17
1
1.05
Big Vein
and
124
125
1
1.06
HTC
and
161
162
1
7.25
HTC Footwall
and
209
218
9
1.24
K-21-59
22
23
1
1.18
Big Vein
and
38
39
1
1.29
and
139
140
1
1.35
HTC
K-21-60
47
49
2
1.49
Big Vein
and
71
75
4
1.31
HTC
and
97
98
1
1.03
K-21-61
17
18
1
1.69
Big Vein
and
28
37
9
1.02
and
50
54
4
1.06
and
76
82
6
1.44
and
98
99
1
1.07
K-21-62
9
10
1
1.295
Big Vein
and
104
105
1
3.747
HTC
and
144
145
1
4.01
K-21-64
33
34
1
1.8
Big Vein
K-21-79
162.55
163.35
0.8
32.53
HTC
Table 1. Summary of Assay Results All intersections are downhole length as there is insufficient Information to calculate true width.
The Big Vein target is an auriferous quartz vein exposed at surface that has been traced over 400 metres along the Appleton Fault Zone. It lies within a larger northeast-southwest trending “quartz vein corridor” that stretches for over 7.5 kilometres as currently outlined, with potential for expansion along the 12km strike length of the Appleton Fault Zone in both directions. Gold mineralization observed at Big Vein includes visible gold in quartz veins, assays of samples from which range from 1.87g/t to 1,065g/t gold. The visible gold is typically hosted in annealed and vuggy gray quartz, that is locally stylolitic with vugs often containing euhedral quartz infilling features characteristic of epizonal gold deposits.
The ongoing 50,000 metre drill program has now tested Big Vein over approximately 250 metres of strike length and to vertical depths of 200 metres. Drilling has produced high grade intercepts as well as wide areas of gold mineralization associated with significant quartz veining and sulphide mineralization including arsenopyrite, pyrite and possible boulangerite noted along vein margins and as strong disseminations in the surrounding wall rocks.
QA/QC
True widths of the reported intersections have yet to be calculated. Assays are uncut. Samples of HQ and NQ split core are securely stored prior to shipping to Eastern Analytical Laboratory in Springdale, Newfoundland for assay. Eastern Analytical is an ISO/IEC17025 accredited laboratory. Samples are routinely analyzed for gold by standard 30g fire assay with ICP (inductively coupled plasma) finish with samples containing visible gold assayed by metallic screen/fire assay. The company submits blanks and certified reference standards at a rate of approximately 5% of the total samples in each batch.
Qualified Person
Roger Moss, PhD., P.Geo., President and CEO of LabGold, a Qualified Person in accordance with Canadian regulatory requirements as set out in NI 43-101, has read and approved the scientific and technical information that forms the basis for the disclosure contained in this release.
The Company gratefully acknowledges the Newfoundland and Labrador Ministry of Natural Resources’ Junior Exploration Assistance (JEA) Program for its financial support for exploration of the Kingsway property.
About Labrador Gold Labrador Gold is a Canadian based mineral exploration company focused on the acquisition and exploration of prospective gold projects in Eastern Canada.
In early 2020, Labrador Gold acquired the option to earn a 100% interest in the Kingsway project in the Gander area of Newfoundland. The three licenses comprising the Kingsway project cover approximately 12km of the Appleton Fault Zone which is associated with gold occurrences in the region, including those of New Found Gold immediately to the south of Kingsway. Infrastructure in the area is excellent located just 18km from the town of Gander with road access to the project, nearby electricity and abundant local water. LabGold is drilling a projected 50,000 metres targeting high-grade epizonal gold mineralization along the Appleton Fault Zone following encouraging early results. The Company has approximately $32 million in working capital and is well funded to carry out the planned program.
The Hopedale property covers much of the Florence Lake greenstone belts that stretches over 60 km. The belt is typical of greenstone belts around the world but has been underexplored by comparison. Work to date by Labrador Gold show gold anomalies in rocks, soils and lake sediments over a 3 kilometre section of the northern portion of the Florence Lake greenstone belt in the vicinity of the known Thurber Dog gold showing where grab samples assayed up to 7.8g/t gold. In addition, anomalous gold in soil and lake sediment samples occur over approximately 40 km along the southern section of the greenstone belt (see news release dated January 25th 2018 for more details). Labrador Gold now controls approximately 40km strike length of the Florence Lake Greenstone Belt.
The Company has 153,711,033 common shares issued and outstanding and trades on the TSX Venture Exchange under the symbol LAB.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Forward-Looking Statements: This news release contains forward-looking statements that involve risks and uncertainties, which may cause actual results to differ materially from the statements made. When used in this document, the words “may”, “would”, “could”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” and similar expressions are intended to identify forward-looking statements. Such statements reflect our current views with respect to future events and are subject to risks and uncertainties. Many factors could cause our actual results to differ materially from the statements made, including those factors discussed in filings made by us with the Canadian securities regulatory authorities. Should one or more of these risks and uncertainties, such as actual results of current exploration programs, the general risks associated with the mining industry, the price of gold and other metals, currency and interest rate fluctuations, increased competition and general economic and market factors, occur or should assumptions underlying the forward looking statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, or expected. We do not intend and do not assume any obligation to update these forward-looking statements, except as required by law. Shareholders are cautioned not to put undue reliance on such forward-looking statements.
Granite Creek Copper (GCX-V) has 100% ownership of a 176 square km copper/gold/silver property named the Carmacks project located in the Minto Copper Belt in the Yukon. The high-grade copper project is on trend with the Minto copper mine. We shall see why that is very important to the future of the company shortly.
The project had completed a 43-101 in 2018 showing an M&I resource of 23.76 MT of 0.85% Cu, 0.31 g/t Au and 3.41 g/t Ag. A 12,000-meter drill program has been completed in 2021 directed at expanding the resource and converting inferred sulphides material to M&I. An updated 43-101 is expected in early 2022 based on results from the 2021 program. In addition there will be an updated PEA in the first half of 2022 to include both oxide and sulphide material.
At today’s price of copper, that 43-101 resource is worth $104.26/tonne in the ground. Naturally copper going any higher will make this project far more desirable. As we see from the ongoing COP26 conference there seems to be a general agreement that the world needs to reduce its carbon footprint by using more “Green Energy.”
Well, Green Energy requires enormous quantities of copper, lithium and graphite, far more than today. The world is short of copper now and is going to run even shorter. Prices will have to go up. Granite Creek Copper is in the catbird’s seat ready to move to production.
As I mentioned above Minto Exploration is important to GCX for several reasons. Minto is about to build a mill and is in the process of going public imminently. Minto has only three years reserves at presently planned production. In their financing pitch deck they clearly refer to GCX with references to potential M&A activities within the Minto Copper Belt. Guess whom they are talking about?
A week ago Granite Creek released the final results from the Phase 1 of three different phases. The Phase 1 program was designed to add sulfide tonnage to the existing oxide resource. It consisted of 19 diamond core drill holes and totaled 6355 meters. Results from the Phase 2 and Phase 3 programs are still in the lab. Phase 2 did 20 RC holes and about 3000 meters in total. Phase 3 was using the diamond core rig again and did about 2700 meters.
Granite Creek is a really easy call. As of today the company has a $22 million market cap with $1 million in cash and $500,000 in callable warrants. In addition there are a bunch of $.15 warrants expiring in January 2022 so the company is well cashed up.
I’m not a big expert on copper but Granite Creek has to be one of the lowest market cap copper stories with a real asset. When Minto goes public and goes into production, I am certain they will pay attention.
Granite Creek is an advertiser. I have participated in the last private placement so naturally I am biased. Do your own due diligence.
Granite Creek Copper GCX-V $.18 (Nov 02, 2021) GCXXF-OTCQB 121 million shares Granite Creek website
VANCOUVER, British Columbia, Nov. 04, 2021 (GLOBE NEWSWIRE) — Silver Hammer Mining Corp. (CSE: HAMR, OTCQB: HAMRF) (“Silver Hammer” or the “Company”) is pleased to announce that it has appointed technical advisor, Ron Burk, to the Company’s board of directors.
Mr. Burk is an exploration geologist with over 30 years of experience in the minerals industry, primarily focused on identifying and evaluating exploration properties. He has held numerous senior roles, including Vice President Exploration at Centerra Gold Inc. and Vice President of Exploration and Chief Geologist at Silver Standard Resources Inc. (now SSR Mining), where he contributed to discoveries that resulted in the definition of a world-class silver resource at the Pitarrilla Project in Durango, Mexico and major gold resources forming the Snowfield and Brucejack deposits in northern British Columbia, Canada. Prior to joining Silver Standard in 2004, Ron had worked since 1989 as an exploration geologist for Teck Resources Ltd. and its predecessors, focused on target generation and property evaluations in the Americas.
“The addition of Ron Burk as a board member adds additional depth to our technical team as we advance the Company’s portfolio of high-potential, high-grade, past-producing western US silver assets, including the Silver Stand Mine in Idaho and the Eliza Silver Project and Silverton Mine in Nevada,” stated Silver Hammer President & CEO, Morgan Lekstrom. “Mr. Burk’s extensive experience, including nearly a decade in senior roles for a major silver-focused mining company, Silver Standard, is invaluable as we grow and advance our portfolio of US silver projects.”https://s.yimg.com/rq/darla/4-9-0/html/r-sf-flx.html
About Silver Hammer Mining Corp.
Silver Hammer Mining Corp. is a junior resource company advancing the past-producing Silver Strand Mine in the Coeur d’Alene Mining District in Idaho, USA, both the Eliza Silver Project and the Silverton Silver Mine in one of the world’s most prolific mining jurisdictions in Nevada and the Lacy Gold Project in British Columbia, Canada. The Company has commenced an initial drill program at Silver Strand that will test for silver and gold mineralization immediately below the mine’s lowest level extending only 90 metres below surface. Silver Hammer strives to become a multi-mine silver producer and will focus near-term exploration and drilling plans at the Company’s Idaho and Nevada silver-gold assets.
*Mineralization hosted on adjacent and/or nearby properties is not necessarily indicative of mineralization hosted on the Company’s property.
On Behalf of the Board of Silver Hammer Mining Corp.
Morgan Lekstrom, President & CEO
Corporate Office: Suite 206 – 595 Howe Street, Vancouver, British Columbia V6C 2T5, Canada
For further information contact: Kristina Pillon, President, High Tide Consulting Corp. T: 604.908.1695 E: investors@silverhammermining.com
The CSE does not accept responsibility for the adequacy or accuracy of this release. The Canadian Securities Exchange has neither approved nor disapproved the contents of this press release.
Hot Chili Limited (ASX: HCH) (OTCQB: HHLKF) (“Hot Chili” or the “Company”) is pleased to announce the launch of a Canadian secondary market Initial Public Offering (IPO), following lodgement of a preliminary prospectus with the Securities Commissions in the Provinces of Canada, other than Quebec.
The preliminary prospectus and associated IPO are key steps in Hot Chili’s application to dual list the Company on the TSX Venture Exchange (TSXV) and fund an ambitious phase of growth and development ahead of the Company’s transition into a future copper producer.
The preliminary prospectus contains an offering of new ordinary shares (Share or Shares) of the Company to raise funds from institutional investors in Canada, the USA and other jurisdictions outside of Australia (Offering). iA Capital Markets and Cormark Securities Inc. are acting as co-lead underwriters for the Offering (Underwriters).
The offering price and size will be determined between the Company and the Underwriters in the context of the market following shareholder resolution of a proposed fifty (50) to one (1) consolidation (Consolidation) at the Company’s General Meeting scheduled for November 15, 2021.
The proposed Consolidation will reduce the number of ordinary shares currently on issue from approximately 4.4 billion to 87.5 million and provide a more effective capital structure of the Company, and a more appropriate share price for a wider range of investors, particularly institutional investors.
If the Consolidation is approved, the ordinary shares of the Company would begin trading on the ASX on a post-consolidation basis on November 17, 2021, with pricing of the IPO to be determined after that point.
Net proceeds from the IPO are proposed to be used to upgrade the Cortadera Resource, advance the Costa Fuego Preliminary Feasibility Study (PFS), test several high-priority exploration targets and for general corporate purposes.
As previously announced, the Company intends to submit an application to list its Shares on the TSXV and has reserved the symbol “HCH”.
Listing will be subject to the Company fulfilling all of the initial listing requirements and conditions of the TSXV, and there is no assurance such a listing will be obtained. Closing of the IPO (Closing) is conditional upon the Shares from the IPO being approved for listing on the TSXV.
To access the announcement please click on the link below.:
Cortadera’s maiden Mineral Resource positions Hot Chili with the largest copper Mineral Resource and one of the largest gold Mineral Resources for an ASX-listed emerging company.
The Cortadera maiden Mineral Resource of 451Mt at 0.46% copper equivalent (CuEq) takes the total Mineral Resource estimate for Costa Fuego (Cortadera, Productora & El Fuego) to 724Mt at 0.48% CuEq for 2.9Mt copper, 2.7Moz gold, 9.9Moz Silver and 64kt molybdenum. Cortadera also contains a higher grade component of 104Mt at 0.74% CuEq, and this has strong potential to continue growing rapidly with further drilling.
Vancouver, British Columbia–(Newsfile Corp. – November 2, 2021) – EMX Royalty Corporation (NYSE American: EMX) (TSXV: EMX) (FSE: 6E9) (the “Company“, or “EMX“) is pleased to announce that its private placement announced October 1, 2021 of up to 5,000,000 units at C$ 3.30 each for gross proceeds of up to C$ 16,500,000 has been oversubscribed and increased up to 6,500,000 units for C$ 21,450,000. The placement is expected to close on Friday, November 5, 2021.
The units will consist of one common share of the Company and one-half of one transferable warrant. Each whole warrant will entitle the purchase for two years of one common share at C$ 4.00 in the first year and C$ 4.50 in the second year.
Eligible finders will be paid a 6.0% cash commission and issued that number of non-transferable compensation warrants equal to 6.0% of the number of units sold to investors introduced by them. Each compensation warrant will entitle the purchase for one year of one common share of the Company for C$ 3.50.https://s.yimg.com/rq/darla/4-9-0/html/r-sf-flx.html
The placement is subject to stock exchange final approval.
This news release does not constitute an offer to sell or a solicitation of an offer to buy any of the securities in the United States. The securities have not been and will not be registered under the United States Securities Act of 1933, as amended (the “1933 Act”), or any U.S. state securities laws and may not be offered or sold within the “United States” or to “U.S. Persons” (as such terms are defined in Regulation S under the 1933 Act) unless registered under the 1933 Act and applicable U.S. state securities laws, or an exemption from such registration is available.
About EMX. EMX is a precious, base and battery metals royalty company. EMX’s investors are provided with discovery, development, and commodity price optionality, while limiting exposure to risks inherent to operating companies. The Company’s common shares are listed on the NYSE American Exchange and TSX Venture Exchange under the symbol EMX, as well as on the Frankfurt exchange under the symbol “6E9”. Please see www.EMXroyalty.com for more information.
For further information contact:
David M. Cole President and Chief Executive Officer Phone: (303) 979-6666 Dave@EMXroyalty.com
Scott Close Director of Investor Relations Phone: (303) 973-8585 SClose@EMXroyalty.com
Neither the TSX-V nor its Regulation Services Provider (as that term is defined in policies of the TSX-V) accepts responsibility for the adequacy or accuracy of this release.
Forward-Looking Statements
This news release may contain “forward looking statements” that reflect the Company’s current expectations and projections about its future results. These forward-looking statements may include statements regarding completion of the transaction, perceived merits of properties, exploration results and budgets, mineral reserves and resource estimates, work programs, capital expenditures, timelines, strategic plans, market prices for precious and base metal, or other statements that are not statements of fact. When used in this news release, words such as “estimate,” “intend,” “expect,” “anticipate,” “will”, “believe”, “potential”, “upside” and similar expressions are intended to identify forward-looking statements, which, by their very nature, are not guarantees of the Company’s future operational or financial performance, and are subject to risks and uncertainties and other factors that could cause the Company’s actual results, performance, prospects or opportunities to differ materially from those expressed in, or implied by, these forward-looking statements. These risks, uncertainties and factors may include, but are not limited to: unavailability of financing, failure to identify commercially viable mineral reserves, fluctuations in the market valuation for commodities, difficulties in obtaining required approvals for the development of a mineral project, increased regulatory compliance costs, expectations of project funding by joint venture partners and other factors. It is possible EMX may not complete the transaction, as a result of failure to fulfill conditions of closing, unavailability of financing or for other reasons EMX cannot anticipate at this time.
Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this news release or as of the date otherwise specifically indicated herein. Due to risks and uncertainties, including the risks and uncertainties identified in this news release, and other risk factors and forward-looking statements listed in the Company’s MD&A for the quarter ended June 30, 2021 and the year ended December 31, 2020 (the “MD&A”), and the most recently filed Revised Annual Information Form (the “AIF”) for the year ended December 31, 2020, actual events may differ materially from current expectations. More information about the Company, including the MD&A, the AIF and financial statements of the Company, is available on SEDAR at www.sedar.com and on the SEC’s EDGAR website at www.sec.gov.
Not for distribution to United States newswire services or for dissemination in the United States.
Geology of the Iska Iska Caldera Complex showing locations of Major Breccia Pipe targets, the Santa Barbara Resource Definition Target Zone and diamond drill holes completed and in progress. Drill holes for which assays are reported in this release are highlighted.
Geology of the Iska Iska Caldera Complex showing locations of Major Breccia Pipe targets, the Santa Barbara Resource Definition Target Zone and diamond drill holes completed and in progress. Drill holes for which assays are reported in this release are highlighted.
TORONTO, Nov. 02, 2021 (GLOBE NEWSWIRE) — Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to provide an update on its Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. To date, the Company has completed 34,409 metres (m) in 64 drill holes including three (3) in progress to test major target areas at Iska Iska. This press release reports drilling results from one (1) additional hole which tested the Santa Barbara Breccia Pipe (“SBBP”) (Hole DHK-23) and two holes (DCN-05 and DCS-03) which tested the Central Breccia Pipe target (“CBP”). To date, every drill hole that has been assayed has returned multiple reportable mineralized intercepts. Currently three drill rigs are in operation at Iska Iska. Two surface drill rigs are continuing to drill at SBBP to outline an initial National Instrument 43-101 (“NI-43-101”) compliant resource. A third drill, an underground rig, situated in the west end of the Santa Barbara Adit, is testing the eastern part of SBBP and its mineralized envelope. Figure 1 is a geological plan map showing locations of drill holes and an updated geological interpretation. Table 1 provides significant drilling results with definitions of chemical symbols and Table 2 lists holes completed with assays pending, as well as holes in progress in the three major target areas. Highlights are as follows:
Highlights:
Santa Barbara Breccia Pipe
100g Ag eq/t (including 38.71 g Ag/t, 0.88%Zn and 0.51%Pb) over 188.5 m from 58.67m to 247.13m in hole DHK-23, drilled from the west end of the Huayra Kasa underground workings at -70 degrees due west. This intersection includes a higher-grade portion of 154 g Ag eq/t (including 75.51 g Ag/t, 0.96% Zn, 0.65% Pb and 0.16%Cu) over 65.8m
Central Breccia Pipe
Hole DCS-03 drilled southwest at -60 degrees from the south radial platform of the CBP intersected twelve (12) separate zones of quartz-tourmaline veins in granodioritic intrusive breccia with best results of 224.92 g Ag eq/t (including 25.36 g Ag/t, 0.12 g Au/t and 0.55% Sn) over 7.42m and 113.67 g Ag eq/t (including 17.85 g Ag/t, 0.085 g Au/t, 0.21% Cu and 0.18% Sn) over 12.03m
Hole DCN-05 drilled due east at -60 degrees from the north radial platform of the CBP intersected ten (10) separate zones of quartz-tourmaline veins in granodioritic intrusive breccia with a best result of 104.72 g Ag eq/t (including 74.41 g Ag/t and 0.22% Cu) over 4.59m
Mr. Tom Larsen, CEO of Eloro, commented: “We are now starting to see a reduction in the backlog of assay samples with two laboratories operating at near capacity. These latest drill results, especially from DHK-23, are again demonstrating the accumulating amount of potential commercial bulk tonnage material, especially within the Santa Barbara complex, a subset of the overall Iska Iska volcanic edifice.”
Dr. Bill Pearson, P.Geo., Eloro’s Executive Vice President Exploration, added: “Mineral resource definition drilling is continuing in the Santa Barbara Target area, which is 1,400m along strike, 500m wide and extends to a depth of 600m. This target is open along strike to the northwest and southeast. Data from the downhole Induced Polarization survey is being processed and the resulting 3D inversion models should aid in refining our geological model, especially determining the likely geometry of the higher-grade zones that typically have greater sulphide content.”
Dr. Osvaldo Arce, P.Geo., General Manager of Eloro`s Bolivian subsidiary, Minera Tupiza S.R.L. (“Minera Tupiza”), said: “As we move to the northwest in the SBBP, silver and gold values are increasing suggesting that there is a zonation at Iska Iska, from a more tin-rich polymetallic mineralization in the southeastern part of the SBBP to more of a silver-rich polymetallic mineralization in the northwestern part. In addition, significant enriched tin-silver mineralization occurs in the northern part of the CBP.”
Note: True width of the mineralization is not known at the present time, but based on the current understanding of the relationship between drill orientation/inclination and the mineralization within the breccia pipes and the host rocks such as sandstones and dacites. It is estimated that true width ranges between 70% and 90% of the down hole interval length but this will be confirmed by further drilling. Percentage metal contents are shown for each element.
Chemical symbols: Ag= silver, Au = gold, Zn = zinc, Pb = lead, Cu = copper, Sn = tin, Bi = bismuth, Cd = cadmium and g Ag eq/t = grams silver equivalent per tonne. Quantities are given in percent (%) for Zn, Pb Cu, Sn, Bi and Cd and in grams per tonne (g/t) for Ag, Au and Ag eq.
Metal prices and conversion factors used for calculation of g Ag eq/t (grams Ag per grams x metal ratio) are as follows:
Element
Price (per kg)
Ratio to Ag
Ag
$875.00
1.00000
Sn
$28.00
0.03200
Zn
$2.80
0.00320
Pb
$2.10
0.00240
Au
$57,400
65.6000
Cu
$8.80
0.01006
Bi
$12.76
0.01458
In
$305.00
0.34857
Cd
$5.50
0.00629
In calculating the intersections reported in this press release a sample cutoff of 30 g Ag eq/t was used with generally a maximum dilution of 3 continuous samples below cutoff included within a mineralized section unless more dilution is justified geologically.
The equivalent grade calculations are based on the stated metal prices and are provided for comparative purposes only, due to the polymetallic nature of the deposit. Preliminary metallurgical tests are in progress to establish levels of recovery for each element reported but currently the potential recovery for each element has not yet been established. While there is no assurance that all or any of the reported concentrations of metals will be recoverable, Bolivia has a long history of successfully mining and processing similar polymetallic deposits which is well documented in the landmark volume “Yacimientos Metaliferos de Bolivia” by Dr. Osvaldo R. Arce Burgoa, P.Geo.
Table 2: Summary of Diamond Drill Holes Completed with Assays Pending and Drill Holes in Progress at Iska Iska from press release of November 2, 2021.
Hole No.
Type
Collar Easting
Collar Northing
Elev
Azimuth
Angle
Hole Length m
Surface Drilling Northwest Extension Santa Barbara
DSB-12
S
205072.7
7656867.5
4165.0
225
-40
806.2
DSB-13
S
205072.7
7656867.5
4165.0
225
-60
696.5
DSB-14
S
205283.0
7656587.2
4175.0
225
-65
968.5
DSB-15
S
204973.1
7657053.8
4165.0
225
-40
731.2
DSB-16
S
204973.1
7657053.8
4165.0
225
-65
862.0
DSB-17
S
7656765.4
205131.3
4173.0
225
-40
841.0
DSB-18
S
7656676.3
205207.1
4175.0
225
-40
890.4
Subtotal
5,795.8
DSB-19
S
7656676.3
205207.1
4175.0
225
-65
In progress
DSB-20
S
7656765.4
205131.3
4173.0
225
-65
In progress
Underground Drilling Santa Barbara Adit
DSBU-1
UG
205285.2
7656074.8
4165.0
90
-10
260.5
DSBU-2
UG
205285.2
7656074.8
4165.0
270
-20
563.6
DSBU-3
UG
205285.2
7656074.8
4165.0
270
-20
443.5
Subtotal
1,267.6
DSBU-4
UG
205285.2
7656074.8
4165.0
180
-20
In progress
Central Breccia Pipe – Surface Radial Drill Program – North Setup
DCN-06
S
204902.0
7655860.0
4420.0
180
-80
626.4
DCN-07
S
204902.0
7655860.0
4420.0
270
-60
680.4
Subtotal
1,306.8
Central Breccia Pipe – Surface Radial Drill Program – South Setup
DCS-04
S
204852.1
7655612.3
4429.7
180
-60
644.4
Subtotal
644.4
Porco Central – Surface Radial Drill Program
DPC-01
S
205457.2
7655110.9
4175.0
270
-60
767.5
DPC-02
S
205457.2
7655110.9
4175.0
225
-60
908.2
DPC-03
S
205457.2
7655110.9
4175.0
135
-60
524.5
DPC-04
S
205457.2
7655110.9
4175.0
0
-60
371.4
DPC-05
S
205457.2
7655110.9
4175.0
90
-60
407.5
DPC-06
S
205457.2
7655110.9
4175.0
243
-60
716.4
Subtotal
3,695.5
TOTAL
12,710.1
S = Surface UG=Underground; collar coordinates in metres; azimuth and dip in degrees Total drilling completed since the start of the program on September 13, 2020, is 34,409m in 64 holes including 3 holes in progress (20 underground holes and 44 surface holes).
Figure 1: Geology of the Iska Iska Caldera Complex showing locations of Major Breccia Pipe targets, the Santa Barbara Resource Definition Target Zone and diamond drill holes completed and in progress. Drill holes for which assays are reported in this release are highlighted: https://www.globenewswire.com/NewsRoom/AttachmentNg/cce5620d-1deb-4db4-8f54-903bee989c21
Qualified Person
Dr. Osvaldo Arce, P. Geo., General Manager of Minera Tupiza, and a Qualified Person in the context of NI 43-101, has reviewed and approved the technical content of this news release. Dr. Bill Pearson, P.Geo., Executive Vice President Exploration Eloro, and who has more than 45 years of worldwide mining exploration experience including extensive work in South America, manages the overall technical program working closely with Dr. Arce. Dr. Quinton Hennigh, P.Geo., Senior Technical Advisor to Eloro and Independent Technical Advisor, Mr. Charley Murahwi P. Geo., FAusIMM of Micon International Limited are regularly consulted on technical aspects of the project.
Drill samples are prepared in ALS Bolivia Ltda’s preparation facility in Oruro, Bolivia with pulps sent to the main ALS Global laboratory in Lima for analysis. As announced in the February 26, 2021 press release, Eloro has changed the assay protocol to utilize X-ray fluorescence (XRF) to more accurately analyze higher tin. Tin in the CBP is suspected to occur as cassiterite which is insoluble in acid digestion, and therefore not suited for wet chemical techniques. In addition, other assay protocols have been changed to provide for a more accurate measurement of the wide-ranging suite of polymetallic metals at Iska Iska. Eloro employs an industry standard QA/QC program with standards, blanks and duplicates inserted into each batch of samples analyzed with selected check samples sent to a separate accredited laboratory.
Recently, AHK Laboratories, who manage a global network of laboratories have setup operations in Bolivia with the establishment of a preparation laboratory in Oruro. AHK has a strong base of accredited laboratories in South America including Peru, Chile, Brazil and Argentina. Eloro has contracted AHK to provide additional analytical services in order to help reduce the sample backlog. A series of check samples are currently being analyzed by AHK as a QA/QC check. AHK is following the same analytical protocols used as with ALS and with the same QA/QC protocols. The used of both accredited laboratories is reducing the backlog of samples to be analysed and improving turnaround.
About Iska Iska
Iska Iska silver-tin polymetallic project is a road accessible, royalty-free property, wholly-controlled by the Title Holder, Empresa Minera Villegas S.R.L. and is located 48 km north of Tupiza city, in the Sud Chichas Province of the Department of Potosi in southern Bolivia. Eloro has an option to earn a 99% interest in Iska Iska.
Iska Iska is a major silver-tin polymetallic porphyry-epithermal complex associated with a Miocene possibly collapsed/resurgent caldera, emplaced on Ordovician age rocks with major breccia pipes, dacitic domes and hydrothermal breccias. The caldera is 1.6km by 1.8km in dimension with a vertical extent of at least 1km. Mineralization age is similar to Cerro Rico de Potosí and other major deposits such as San Vicente, Chorolque, Tasna and Tatasi located in the same geological trend.
Eloro began underground diamond drilling from the Huayra Kasa underground workings at Iska Iska on September 13, 2020. On November 18, 2020 Eloro announced the discovery of a significant breccia pipe with extensive silver polymetallic mineralization just east of the Huayra Kasa underground workings and a high-grade gold-bismuth zone in the underground workings. On November 24, 2020, Eloro announced the discovery of the SBBP approximately 150m southwest of the Huayra Kasa underground workings.
Subsequently, on January 26, 2021, Eloro announced significant results from the first drilling at the SBBP including the discovery hole DHK-15 which returned 129.60 g Ag eq/t over 257.5m (29.53g Ag/t, 0.078g Au/t, 1.45%Zn, 0.59%Pb, 0.080%Cu, 0.056%Sn, 0.0022%In and 0.0064% Bi from 0.0m to 257.5m. Subsequent drilling has confirmed significant values of Ag-Sn polymetallic mineralization in the SBBP and the adjacent CBP. A substantive mineralized envelope which is open along strike and down-dip extends around both major breccia pipes. Continuous channel sampling of the Santa Barbara Adit located to the east of SBBP returned 442 g Ag eq/t (164.96 g Ag/t, 0.46%Sn, 3.46% Pb and 0.14% Cu) over 166m including 1,092 g Ag eq/t (446 g Ag/t, 9.03% Pb and 1.16% Sn) over 56.19m. The west end of the adit intersects the end of the SBBP.
Since the discovery hole on the SBBP, Eloro has released a number of significant drill results on this target, including:
122.66 grams g Ag eq/t (35.05 g Ag/t, 0.72% Zn, 0.61% Pb, 0.11% Sn and 0.06 g Au/t) over 123.61m including 205.74 g Ag eq/t (92.30 g Ag/t, 0.57% Zn, 0.85% Pb, 0.18% Sn and 0.07 g Au/t) over 32.32m (DSB-07),
105.41 g Ag eq/t (8.55 g Ag/t, 1.01% Zn, 0.48% Pb, 0.06% Sn and 0.38 g Au/t) over 173.58m including 199.77 g Ag eq/t (21.90 g Ag/t, 1.18% Zn, 0.93% Pb 0.12% Sn and 0.94 g Au/t) over 39.08m (DSB-07)
69.89 g Ag eq/t over 252.89m from 355.12 to 608.02m including several higher-grade sections of 196.60 g Ag eq/t including 131.13 g Ag/t over 14.52m, 134.62 g Ag eq/t including 93.25 g Ag/t over 21.08m and 145.35 g Ag eq/t including 2.38% Zn over 10.11m (DSB-08).
114.96 Ag eq/t including 0.325% Sn over 56.2m including a higher-grade section of 187.98 g Ag eq/t including 0.535% Sn over 28.86m; 80.71 g Ag eq/t including 0.213% Sn over 74.39m and 118.69 g Ag eq/t over 10.77m (DSB-10).
129.65 g Ag eq/t (18.38 g Ag/t, 2.14% Zn, 0.67%Pb, and 0.047% Sn) over 300.75m from 65.14m to 365.91m, including higher grade intervals of 215.54 g Ag eq/t over 72.76m, 163.35 g Ag eq/t over 31.83m and 224.48 g Ag eq/t over 19.39m. 82% of this 446.5m long hole contained reportable intervals (DHK-18).
234.19 g Ag eq/t (70.58 g Ag/t, 2.31% Zn, 2.74% Pb and 0.042% Sn) over 53.2m including a higher-grade portion of 931.73 g Ag eq/t (367.29 g Ag/t, 5.64% Zn, 13.67% Pb and 0.10% Sn) over 9.26m (DHK-20).
108.24 g Ag eq/t (3.14g Ag/t, 0.24 g Au/t, 2.03% Zn and 0.58% Pb) over 48.2m including a higher-grade interval grading 180.76 g Ag eq/t (4.46 g Ag/t, 0.35 g Au/t, 3.57% Zn and 1.05% Pb) over 15.02m (DHK-19). 160.22 g Ag eq/t (36.53 g Ag/t, 1.63% Zn, 1.20% Pb and 0.10% Sn) over 194.14m (DHK-21) including higher grade portions of:
250.50 g Ag eq/t (51.31 g Ag/t, 3.35% Zn, 1.78% Pb and 0.10% Sn) over 18.24m.
257.40 g Ag eq/t (75.83 g Ag/t, 2.29% Zn, 2.40% Pb and 0.12% Sn) over 16.33m.
350.91 g Ag eq/t (112.57 g Ag/t, 1.41% Zn, 3.08% Pb and 0.33% Sn) over 30.06m.
64% of this 512.9m long hole contains reportable intersections
94.68 g Ag eq/t (3.87 g Ag/t, 0.067 g Au/t, 1.63% Zn, 0.43% Pb and 0.05% Sn) over 169.93m including a higher-grade zone that graded 158.64 g Ag eq/t (9.35g Ag/t, 0.016 g Au/t, 3.43% Zn, 0.71% Pb and 0.03%Sn) over 29.84m (DHK-22).
On May 4, 2021, Eloro released results from the first drill hole on the CBP. Hole DCN-01 intersected multiple mineralized intercepts including 196.09 g Ag eq/t (150.25 g Ag/t, 0.10% Sn and 0.05 g Au/t) over 56.2m and containing 342.98 g Ag eq/t (274.0 g Ag/t, 0.16% Sn and 0.16 g Au/t) over 27.53m.
Hole DCN-04 drilled at -80 degrees to the north from the northern radial platform of the CBP, intersected seventeen (17) mineralized intersections, principally Sn-Ag-bearing, over its 851.4m length. Best results include: 71.54 g Ag eq/t (32.58 g Ag/t and 0.10% Sn) over 97.10m from 134.40 to 231.5m; 101.52 g Ag eq/t (28.74 g Ag/t and 0.19% Sn) over 62.01m; 70.42 g Ag eq/t (28.74 g Ag/t and 0.16% Sn) over 22.59m; and 236.96 g Ag eq/t (92.21 g Ag/t and 0.25% Sn) over 17.45m. Hole DCS-02 was drilled southeast at -60 degrees from the south radial platform of the CBP. This hole, which was drilled to 800.5m, intersected nine (9) reportable Ag-Zn-Pb-Sn mineralized intervals. Best results include 79.53 g Ag eq/t (including 0.21% Sn) over 19.42m, 101.01 g Ag eq/t (32.76 g Ag/t, 0.76% Zn, 0.75% Pb) over 10.47 and 130.95g Ag eq/t (34.14 g Ag/t, 0.10 g Au/t, 1.35% Zn and 0.56 % Pb over 7.40m.
A detailed ground magnetic survey of the Iska Iska property, reported on June 6, 2021, confirmed the extent of the Iska Iska Caldera as determined from geological mapping and satellite interpretation, including Aster data. The SBBP and CBP, both of which have been confirmed by drill-testing, are marked by prominent low anomalies reflecting strong alteration. The magnetic data suggests that the Central and Porco Breccia Pipes likely merge at depth. In addition, there is a prominent area of low intensity magnetics northwest of the SBBP which was reported on in this press release.
Geological mapping and satellite interpretation identified a third major breccia pipe target, Porco (South), that is approximately 600m in diameter (South) located southeast of the CBP in the southern part of the Iska Iska caldera complex. The Porco (South) Breccia Pipe target has a similar magnetic signature to the Santa Barbara and Central Breccia Pipes, further confirming the likelihood of it being a major breccia pipe. Six (6) drill holes have been completed on Porco; assay results are pending. Previous channel sampling in the Porco adit located adjacent the target area 200m to the southeast returned 50m grading 519.35 g Ag eq/t including 236.13 g Ag/t, 1.89 g Au/t, 0.87% Cu, 0.22% Bi and >0.05% Sn over an average sample width of 2.49m.
Currently three diamond drill rigs are active at Iska Iska, two surface rigs and one underground drill. Planned drilling for 2021 is 51,000m with the aim of outlining an initial inferred NI 43-101 compliant mineral resource by Q1 2022. The target zone at the SBBP and the surrounding mineralized envelope is 1400m along strike, 500m wide and extends to a depth of 600m. This zone is open along strike to the northwest and southeast. A downhole induced polarization/resistivity (IP/Res) survey is in progress to further define drill targets and aid resource definition drilling. Preliminary metallurgical tests are also in progress. An updated NI 43-101 Technical Report is being prepared by independent consultant Micon International Ltd.
About Eloro Resources Ltd.
Eloro is an exploration and mine development company with a portfolio of gold and base-metal properties in Bolivia, Peru and Quebec. Eloro has an option to acquire a 99% interest in the highly prospective Iska Iska Property, which can be classified as a polymetallic epithermal-porphyry complex, a significant mineral deposit type in the Potosi Department, in southern Bolivia. Eloro commissioned a NI 43-101 Technical Report on Iska Iska, which was completed by Micon International Limited and is available on Eloro’s website and under its filings on SEDAR. Iska Iska is a road-accessible, royalty-free property. Eloro also owns an 82% interest in the La Victoria Gold/Silver Project, located in the North-Central Mineral Belt of Peru some 50 km south of Barrick’s Lagunas Norte Gold Mine and Pan American Silver’s La Arena Gold Mine. La Victoria consists of eight mining concessions and eight mining claims encompassing approximately 89 square kilometres. La Victoria has good infrastructure with access to road, water and electricity and is located at an altitude that ranges from 3,150 m to 4,400 m above sea level.
For further information please contact either Thomas G. Larsen, Chairman and CEO or Jorge Estepa, Vice-President at (416) 868-9168.
Information in this news release may contain forward-looking information. Statements containing forward looking information express, as at the date of this news release, the Company’s plans, estimates, forecasts, projections, expectations, or beliefs as to future events or results and are believed to be reasonable based on information currently available to the Company. There can be no assurance that forward-looking statements will prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements. Readers should not place undue reliance on forward-looking information.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.
TORONTO, Nov. 2, 2021 /CNW/ – Vox Royalty Corp. (TSXV: VOX) (“Vox” or the “Company“), a high growth precious metals focused royalty company, is pleased to announce that it has realized preliminary quarterly royalty revenue of C$1,558,800 (US$1,223,400)(1) for the three-month period ended September 30, 2021.
Quarterly revenue benefitted from record royalty-linked gold production by Karora Resources Inc. (TSX: KRR) from the Hidden Secret and Mousehollow deposits at Higginsville covered by the Dry Creek royalty and record royalty-linked iron ore production volumes by Mineral Resources Limited (ASX: MIN) at Koolyanobbing, and consistent royalty revenues from each of the Company’s Janet Ivy gold royalty and Brauna diamond royalty. Royalty revenues relative to Q2 2021 were inline in spite of a significant reduction in realised iron ore pricing at Koolyanobbing.
Quarterly, year to date, and annual revenue guidance figures are summarized in the below table:
Three months endedSeptember 30, 2021
Nine months ended September 30, 2021 (Fiscal 2021 YTD)
2021 Annual Guidance
Royalty revenue (C$)
$1,558,800
$3,856,000
$4,000,000 – $5,000,000
Royalty revenue (US$)
$1,223,400(1)
$3,077,500
$3,200,000 – $4,000,000
Kyle Floyd, Chief Executive Officer stated: “We are pleased to announce another quarter of strong royalty revenue and multiple royalty-linked production records at Higginsville and Koolyanobbing. The Vox portfolio remains on track to deliver revenue at the higher end of our expectations, even in light of revenue guidance doubling in July 2021. Further, we anticipate first royalty revenue from our Segilola asset during Q4/Q1, following the achievement of commercial production at Segilola in October. The coming quarters present even more value accretive developments for Vox shareholders to look forward to, as we continue our industry leading organic growth trajectory from 5 to 10 producing assets by late 2023.”
About Vox
Vox is a high growth precious metals royalty and streaming company with a portfolio of over 50 royalties and streams spanning eight jurisdictions. The Company was established in 2014 and has since built unique intellectual property, a technically focused transactional team and a global sourcing network which has allowed Vox to become the fastest growing company in the royalty sector. Since the beginning of 2019, Vox has announced over 20 separate transactions to acquire over 45 royalties.
Cautionary Note Regarding Forward Looking Information
This news release contains certain forward-looking statements. Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as “expects” or “does not expect”, “is expected”, “anticipates” or “does not anticipate” “plans”, “estimates” or “intends” or stating that certain actions, events or results ” may”, “could”, “would”, “might” or “will” be taken, occur or be achieved) are not statements of historical fact and may be “forward-looking statements”. Forward-looking statements are subject to a variety of risks and uncertainties which could cause actual events or results to materially differ from those reflected in the forward-looking statements.
The forward-looking statements and information in this press release include, but are not limited to Vox’s anticipated outlook for the 2021 fiscal year, completion of certain anticipated milestones, transactions and developments by the operators of certain underlying projects and mines in respect of Vox’s royalty and stream portfolio, anticipated future cash flows, future financial reporting by Vox, the receipt of payments from Vox’s mining royalty and streaming portfolio, the requirements for regulatory approvals and third party consents, and the completion of mine construction, production and expansion under construction phases at the mines or properties that Vox holds an interests in.
Forward-looking statements and information are based on forecasts of future results, estimates of amounts not yet determinable and assumptions that, while believed by management to be reasonable, are inherently subject to significant business, economic and competitive uncertainties and contingencies. Forward-looking statements and information are subject to various known and unknown risks and uncertainties, many of which are beyond the ability of Vox to control or predict, that may cause Vox’s actual results, performance or achievements to be materially different from those expressed or implied thereby, and are developed based on assumptions about such risks, uncertainties and other factors set out herein, including but not limited to: the requirement for regulatory approvals and third party consents, the impact of general business and economic conditions, the absence of control over the mining operations from which Vox will receive royalties, including risks related to international operations, government relations and environmental regulation, the inherent risks involved in the exploration and development of mineral properties; the uncertainties involved in interpreting exploration data; the potential for delays in exploration or development activities; the geology, grade and continuity of mineral deposits; the impact of the COVID-19 pandemic; the possibility that future exploration, development or mining results will not be consistent with Vox’s expectations; accidents, equipment breakdowns, title matters, labor disputes or other unanticipated difficulties or interruptions in operations; fluctuating metal prices; unanticipated costs and expenses; uncertainties relating to the availability and costs of financing needed in the future; the inherent uncertainty of production and cost estimates and the potential for unexpected costs and expenses, commodity price fluctuations; currency fluctuations; regulatory restrictions, including environmental regulatory restrictions; liability, competition, loss of key employees and other related risks and uncertainties. Should one or more of these risks, uncertainties or other factors materialize, or should assumptions underlying the forward-looking information or statement prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed, estimated or expected. Vox cautions that the foregoing list of material factors is not exhaustive. When relying on the Company’s forward-looking statements and information to make decisions, investors and others should carefully consider the foregoing factors and other uncertainties and potential events.
Vox has assumed that the material factors referred to in the previous paragraph will not cause such forward looking statements and information to differ materially from actual results or events. However, the list of these factors is not exhaustive and is subject to change and there can be no assurance that such assumptions will reflect the actual outcome of such items or factors. The forward-looking information contained in this press release represents the expectations of Vox as of the date of this press release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward looking information and should not rely upon this information as of any other date. While Vox may elect to, it does not undertake to update this information at any particular time except as required in accordance with applicable laws.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Notes:
(1)
These figures have not been audited and are subject to change. As the Company has not yet finished its quarter-end close procedures, the anticipated financial information presented in this press release is preliminary, subject to final quarter-end closing adjustments, and may change materially.
North Vancouver, British Columbia–(Newsfile Corp. – November 2, 2021) – Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) (“Lion One” or the “Company”) is pleased to announce further high-grade intercepts from two recently completed drillholes as part of ongoing deep extensional step-out drilling from the Company’s 100% owned Tuvatu gold project in Fiji.
– DEEP FEEDER ZONE 500 NOW EXTENDS OVER 300M VERTICALLY AND 150M LATERALLY
– WEIGHTED AVERAGE GRADE OF 23 G/T Au FROM ZONE 500 MINERALIZED INTERCEPTS 2.6 X HIGHER THAN AVERAGE GRADE OF RESOURCE
– ZONE 500 CONNECTS WITH BASE OF EXISTING RESOURCE AT APPROX. 470M DEPTH
– DRILLED EXTENT OF TUVATU SYSTEM INCREASED BY 53% TO APPROX. DEPTH OF 720M
Drill highlights include:
33.40 g/t Au over 3.90m from downhole depth of 629.30m from TUDDH544-W2 – including 105.0 g/t Au over 0.30m from 629.6m, 65.0 g/t Au over 0.30m from 630.2m, and 112.0 g/tAuover 0.30m from 631.1m
48.74 g/t Au over 0.6m from downhole depth of651.50m, and 33.06 g/t Au over 0.6m from downhole depth of 658.2m, from hole TUDDH544-W1
Sergio Cattalani, Lion One’s Senior Vice President Exploration, commented, “High grade mineralization in Deep Feeder Zone 500 has now been demonstrated to extend over an area approximately 150m along strike and 300m vertically with an overall calculated weighted average grade of >23 g/t Au; Zone 500 mineralisation will add significantly to the overall Au inventory of the Tuvatu orebody. Furthermore, an improved understanding of the orientation of the 500 Zone now allows us to connect this high-grade feeder to the base of the existing resource. We continue to plan additional drilling to test the lateral and vertical extents of this zone which remains open in all directions.”
Deep Feeder Zone 500
These most recent intercepts reported above are believed to be the continuation of the interpreted deep feeder structure that encountered 55.43 g/t Au over 12.70m in TUDDH500 (see July 24, 2020 News Release), 55.44 g/t Au over 2.30m in TUDDH533 (see July 26, 2021 News Release), and 24.92 g/t Au over 3.70m in TUG-135 (see September 7, 2021 News Release), among many others.
Deeper Feeder Zone 500, cont.
This important gold-bearing structure has now been intersected by multiple holes, including TUDDH500, 500W1, 500W2, TUDDH533, 533W1, TUDDH528, TUDDH517, 517W1, TUDDH514, 514W1, TUDDH544W1, TUDDH544W2, TUG135, and TUG136 (results pending; see Figures 1, 2). At 33.40 g/t Au over 3.90m, the intercept reported here from TUDDH544W2 represents one of the best overall downhole intercepts to date, for holes drilled at a high angle to the 500 Zone structure. Figure 3 shows a photo of visible gold from a portion of this intercept.
The growing number of intercepts has allowed for a remodeling of the 500 Zone structure such that the current best-fit orientation of the 500 Zone is now modelled with an azimuth of N060° and a dip of -88°, with all of the high-grade intercepts from the boreholes listed above captured by an approximately 25m wide envelope. This revised model for the 500 Zone structure connects the 500 Zone to the Tuvatu orebody at a depth of approximately -150m RSL by way of two historic drillholes (TUDDH212, previously interpreted as the base of UR2 lode; and TUG110, previously interpreted as part of the URW3 lode) which occur in the lowermost portion of the existing resource model. This portion of the orebody remains significantly under-drilled.
Based on only the few, currently reported number of intercepts, the 500 Zone as defined above has a calculated weighted average thickness of approximately 2.75m and a calculated weighted average grade of 23.31 g/t Au, or approximately 2.6X the average grade of the current Tuvatu resource it underlays. At present, it represents an approximate increase in contained Au ounces of >25% (uncategorized) over the existing resource. It is increasingly clear that the current Tuvatu resource represents only a fraction of a much larger and considerably more extensive, high-grade Au deposit for which additional drilling is warranted to further define its full extent.
Resignation of Company Director
The Company also announces the resignation of Stephen Mann from the Board of Directors. The Company thanks Mr. Mann for his service to the Company as board member since 2012 and wishes him well in his future endeavors.
Figure 1: Longitudinal section oriented at N060°, -88°E of the 500 Zone high-grade feeder structure showing block model and selected drill Intercepts. The grid is 300m, the darker yellow is current indicated resource and the lighter yellow is current inferred resource. Dots indicate modelled pierce points for existing drill intercepts defining the 500 Zone (green=recently completed; orange=previously reported; open=within current resource).
Figure 2: Detail of Figure 1. The grid is 100m; intercepts are expressed as g/t Au over downhole width in meters. Dots indicate modelled pierce points for existing drill intercepts defining the 500 Zone (green=recently completed; orange=previously reported; white=within current resource).
Table 1: Drilling Intervals Reported (intervals greater than 3.0 g/t Au cutoff are bolded)
Drill Hole
From (m)
To (m)
Interval (m)
Au (g/t)
TUDDH544W1 (incomplete)
643.7
644.6
0.9
2.17
incl.
643.7
644.0
0.3
4.05
651.5
652.1
0.6
46.79
incl.
651.5
651.8
0.3
56.74
and
651.8
652.1
0.3
36.83
658.2
658.8
0.6
33.06
incl.
658.2
658.5
0.3
5.11
and
658.5
658.8
0.3
61.0
TUDDH544W2
573.2
575.3
2.1
6.69
incl.
574.1
575.0
0.9
14.67
and
574.4
574.7
0.3
32.83
577.1
578.3
1.2
7.45
incl.
577.1
577.4
0.3
12.69
and
577.4
577.7
0.3
5.99
and
577.7
578.0
0.3
8.57
and
578.0
578.3
0.3
2.23
579.5
579.8
0.3
25.56
629.3
633.2
3.90
33.40
incl.
629.3
629.6
0.3
25.0
and
629.6
629.9
0.3
105.0
and
630.2
630.5
0.3
65.0
and
630.5
630.8
0.3
19.0
and
630.8
631.1
0.3
5.67
and
631.1
631.4
0.3
112.0
and
631.4
631.7
0.3
45.0
and
632.3
632.9
0.6
3.47
and
632.9
633.2
0.3
50.0
Table 2: Survey details of diamond drill holes referenced in this release (Fiji Map Grid)
Hole No
coordinates
RL
final depth
dip
azimuth
N
E
m
(TN)
TUDDH544W1
3920795.6
1876350.7
209.7
758.50
-65.04°
132.06°
TUDDH544W2
3920795.6
1876350.7
209.7
926.8
-65.04°
132.06°
Figure 3: Photo of a portion of uncut drill core from TUDDH544W2, showing coarse visible gold and pyrite. This 30cm sample returned 112 g/t Au from 631.1-631.4m.
The Company is utilizing its own diamond drill rig, using PQ, HQ and ultimately NQ sized drill core rods. Drill core is logged by Company geologists and then is sawn in half and sampled by Lion One staff.
Samples are analyzed at the Company’s own geochemical laboratory in Fiji, whilst pulp duplicates of all samples with results >0.5g/t Au are re-assayed, as well as sent to ALS Global Laboratories in Australia for check assay determinations. All samples for all high-grade intercepts reported here will be sent to ALS Global Laboratories for check assays shortly. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10g/t Au are then re-analyzed by gravimetric method. Lion One’s laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples sent to ALS Townsville, Queensland, Australia are analyzed by the same methods (Au-AA26, and also Au-GRA22 where applicable). ALS also analyze for 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES. (method ME-ICP61).
Qualified Person
The scientific and technical content of this news release has been reviewed, prepared, and approved by Mr. Sergio Cattalani, P. Geo, who is a qualified person pursuant to National Instrument 43-101 – Standards of disclosure for Mineral Projects (“NI-43-101).
About Tuvatu
The Tuvatu gold deposit is located on the island of Viti Levu in the South Pacific island nation of Fiji. The mineral resource for Tuvatu as disclosed in the technical report “Tuvatu Gold Project PEA”, dated June 1, 2015, and prepared by Mining Associates Pty Ltd of Brisbane Qld, comprises 1,120,000 tonnes indicated at 8.17 g/t Au (294,000 oz. Au) and 1,300,000 tonnes inferred at 10.60 g/t Au (445,000 oz. Au) at a cut-off grade of 3 g/t Au. The technical report is available on the Lion One website at www.liononemetals.com and on the SEDAR website at www.sedar.com.
About Lion One Metals Limited
Lion One’s flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One’s CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.
On behalf of the Board of Directors of Lion One Metals Limited “Walter Berukoff“ Chairman and CEO
Neither the TSX Venture Exchange nor its Regulation Service Provider accepts responsibility for the adequacy or accuracy of this release.
This press release may contain statements that may be deemed to be “forward-looking statements” within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “proposed”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Limited’s current beliefs and is based on information currently available to Lion One Metals Limited and on assumptions Lion One Metals Limited believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Limited or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Limited, general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Limited has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Limited does not undertake to update any forward-looking information, except in accordance with applicable securities laws.
