Tag: #InvestingInBatteryMetals

Collective Mining Significantly Expands the Main Breccia Discovery at Apollo and Drills Near Surface High-Grade Mineralization Including 168.6 Metres at 2.91 g/t Gold Equivalent

Post author By admin
Post date November 29, 2022

Drill hole APC-17, a significant step-out hole to the north, intersected two zones of mineralization within the Main Breccia discovery at the Apollo target. The shallow zone, which was intersected directly below where the Main Breccia daylights at surface cut the following interval:
The second zone encountered in hole APC-17 cut the longest intercept of continuous mineralization within the Main Breccia discovery drilled to date with results as follows:
Drill hole APC-17, which was terminated at 912.8 metres due to rig capacity, bottomed in strong mineralization with the final 2.75 metres averaged 1.56 g/t gold, 9 g/t silver and 0.03% copper.
Drill hole APC-18 intersected near surface and high-grade copper-silver-gold mineralization approximately 300 metres to the north of the near surface intercept in APC-17. The mineralized breccia in this zone is strongly overprinted by numerous zones of carbonate, base metal veins with assay results as follows:
With the result of step out hole APC-17 and recently announced visuals from step out hole APC-22, the Main Breccia discovery now measures up to 385 metres along strike by 350 metres in width (previously 190 metres) and has been extended down to a vertical depth of 825 metres below surface (previously 500 metres). The discovery remains wide open for expansion and further step-out holes are currently being designed.
Three rigs continue to drill at Apollo with holes APC-19 through APC-26 completed and holes APC-27 through APC-29 underway. Additional assay results are anticipated in the near term.

TORONTO, Nov. 29, 2022 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from four additional holes drilled at the Apollo target (“Apollo”) within the Company’s Guayabales project located in Caldas, Colombia. The Main Breccia discovery at Apollo is a high-grade, bulk tonnage copper-gold-silver porphyry-related breccia target. As part of its fully funded 23,000 metre drill program for 2022, there are currently three diamond drill rigs operating at the Apollo target.

“The intersection of high-grade and shallow mineralization at Apollo demonstrates the excellent metal endowment of the Main Breccia and most importantly, the dimensions of the system continue to expand and clearly point to the fact that we are dealing with a large-scale discovery. It is truly remarkable to drill a 912-metre-long hole that bottoms in mineralization. Finally, the shallow, higher grade intercepts encountered in APC-17 and APC-18 are more than 300 metres apart and confirms that the southern portion of the deposit is where the system comes to surface. As a result, we are about to start construction of a new drill pad located between the two shallow intercepts in order to start defining the shallow portion of the Main Breccia mineralized system,” commented Ari Sussman, Executive Chairman.

Details (See Table 1 and Figures 1–3)

Nineteen diamond drill holes with accompanying assay results have now been announced at Apollo and a further eleven holes are outstanding. The Company recently completed four drill holes; one northerly directed, step out hole (APC-17), to test for mineralized extensions to the Main Breccia discovery, a second shallow hole drilled southwesterly to define extensions of newly discovered mineralized breccia outcrops located in the southern portion of the deposit and two fringe holes drilled at shallow angles to the west of the Main Breccia discovery.

Drill hole APC-17 was drilled approximately due north to a maximum depth of 912.60 metres. The hole intersected three mineralized zones: 72.3 metres of mineralization beginning at 118.20 metres down hole (100m vertical), 11.65 metres of mineralized breccia from 252.6 metres (220m vertical) and another 547.65 metres of mineralization from 365.15 metres down hole (330m vertical) to the end of the hole at 912.80m (825m vertical). The hole terminated while still in mineralized breccia due to limitations of the drill rig. Total cumulative mineralization in this diamond drill hole was 628.3 metres and is the most mineralization drilled in a single hole to date into the Main Breccia discovery at Apollo. The shallow intercept is hosted within angular porphyry related breccia containing chalcopyrite (1-2%) with pyrite and pyrrhotite and is located directly beneath recently discovered mineralization outcropping at surface. The deeper and longer intercept is also hosted within angular porphyry related breccia with the matrix filled with pyrite, some chalcopyrite and overprinting carbonate base metal veins (“CBM”). The following results are highlighted:

72.3 metres @ 2.57 g/t gold equivalent consisting of 1.00 g/t gold, 28 g/t silver and 0.63% copper (100 metres vertical).
11.65 metres @ 1.88 g/t gold equivalent consisting of 1.80 g/t gold, 4 g/t silver and 0.05% copper (220m vertical).
547.65 metres @ 1.03 g/t gold equivalent consisting of 0.76 g/t gold, 14 g/t silver and 0.04% copper (330m vertical).

Drill hole APC-18 was drilled in a southwest direction and intersected shallow, copper-silver-gold mineralization from 136.05 metres to 304.65 metres with the hole terminating at a final depth of 499.05 metres. The mineralized breccia contains a matrix of chalcopyrite and pyrite is strongly overprinted by numerous zones of CBM veins hosting sphalerite and galena. The hole was drilled below outcrops of breccia mineralization in the south-central portion of the deposit with assay results as follows:

168.6 metres @ 2.91 g/t gold equivalent consisting of 0.98 g/t gold, 69 g/t silver and 0.5% copper (85 metres vertical).

With the result of APC-17 and recently announced visuals from APC-22, the potential total volume of rock hosting the Main Breccia discovery within it has approximately tripled in size with the dimensions now measuring 385 metres along strike by 350 metres width by 825 metres depth versus prior dimensions of 385 metres x 190 metres x 500 metres. The discovery remains wide open for expansion and further step-out holes are currently being designed.

Holes APC-15 and APC-16 were drilled at shallow angles on the western periphery of the main breccia body. APC-15 was drilled to the northwest and intersected mineralized crackle breccia returning 56.05 metres @ 0.57 g/t gold equivalent from 68.6 metres (55 metres vertical). This is a new mineralized area outside of the Main Breccia discovery at Apollo. APC-16 was also drilled outside the Main Breccia discovery to the southwest and intersected 500 parts per million copper in crackle breccia from 200 metres and until the end of the hole at 303.35 metres. The Company believes that both APC-15 and APC-16 may have drilled over the top of the Main Breccia discovery in these locations.

Three rigs continue to drill at Apollo with additional assay results anticipated in the near term.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers an 800 metres X 700 metres area. The Apollo target area hosts the Company’s new Main Breccia discovery plus a vein system located above and on the eastern flank of the Main Breccia discovery and the Northern Breccia discovery located 250 metres to the north of the Main Breccia. Multiple additional untested breccia, porphyry and vein targets have been generated and will be drilled in due course. The overall Apollo target area also remains open for further expansion.

Table 1: Apollo Target Assays Results

HoleID	From (m)	To (m)	Intercept (m)	Au (g/t)	Ag (g/t)	Cu %	Mo %	AuEq (g/t)*	CuEq (%)*
APC-18	136.05	304.65	168.60	0.98	69	0.50	0.002	2.91	1.48
Incl	149.20	157.00	7.80	5.08	35	0.52	0.002	6.34	3.23
	193.20	205.10	11.90	2.18	154	0.77	0.001	5.81	2.97
	233.90	251.50	17.60	1.49	56	0.74	0.002	3.63	1.85
	291.65	297.00	5.35	3.26	10	0.11	0.001	3.47	1.77
APC-17	118.20	190.50	72.30	1.00	28	0.63	0.004	2.57	1.31
Incl	121.90	130.40	8.50	2.42	30	0.61	0.005	3.91	2.00
APC-17	252.60	264.25	11.65	1.80	4	0.05	0.002	1.88	–
and	365.15	912.80	547.65	0.76	14	0.04	0.001	1.03	–
Incl	527.80	561.10	33.30	3.01	19	0.05	0.002	3.23	–
	579.20	596.80	17.60	2.37	25	0.06	0.001	2.74	–
	816.00	837.50	21.50	1.53	28	0.09	0.001	2.04	–
APC-16				NSV*
APC-15	54.20	110.25	56.05	0.37	5	–	–	0.57	–
Incl	68.60	69.10	0.50	6.26	15	–	–	6.27	–
	77.85	79.20	1.35	4.17	20	–	–	4.41	–
and	180.95	181.65	0.70	13.29	9	–	–	12.81	–
	206.95	207.50	0.55	7.87	5	–	–	7.61	–

*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.016 x 0.95) + (Cu (%) x 1.96 x 0.95)+ (Mo (%)*7.35 x 0.95) and CuEq (%) is calculated as follows: (Cu (%) x 0.95) + (Au (g/t) x 0.51 x 0.95) + (Ag (g/t) x 0.01 x 0.95)+ (Mo(%)x 3.75 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Ag – $22/oz Mo US$15.00/lb and Au – US$1,400/oz and recovery rates of 95% for Au, Ag, Mo and Cu. Recovery rate assumptions are speculative as no metallurgical work has been completed to date.

** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.

*** NSV: No significant values

Figure 1: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)

Figure 2: Plan View of the Main Breccia discovery at Apollo Highlighting New Drill Holes APC17 & APC-18 and the Expanded Dimensions of the Discovery (CNW Group/Collective Mining Ltd.)

Figure 3: Apollo Target: Main Breccia Cross Section with Core Photo Highlights from APC-17 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com.

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/November2022/29/c8565.html

Tags #AriSussman, #CNL, #CollectiveMining, #Guayabales, #InvestingInBatteryMetals, #InvestingInCopper, #JuniorMining, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, maurice jackson, proven and probable

Gold Shore Resources Junior Mining Precious Metals

Goldshore Intersects Additional High-Grade Shears in the QES Zone at the Moss Lake Gold Project

Post author By admin
Post date November 28, 2022

Vancouver, British Columbia–(Newsfile Corp. – November 28, 2022) – Goldshore Resources Inc. (TSXV: GSHR) (OTCQB: GSHRF) (FSE: 8X00) (“Goldshore” or the “Company“), is pleased to announce assay results from its ongoing 100,000-meter drill program at the Moss Lake Project in Northwest Ontario, Canada (the “Moss Lake Gold Project“).

Highlights:

Results for seven holes, drilled to expand the coverage of the high-grade shears in the QES Zone, have confirmed higher-grade shear-hosted gold mineralization within a large volume of well mineralized diorites. These results are all within the $1500 Whittle pit that constrains the current resource and identifies new high-grade shears. Best intercepts include:
- 1.51 g/t Au over 6.0m from 502.0m depth in MQD-22-075 and
- 1.47 g/t Au over 30.1m from 530.0m
- 8.45 g/t Au over 5.0m from 576m depth in MQD-22-076 including
  - 36.9 g/t Au over 1.0m from 577m
- 1.87 g/t Au over 6.75m from 602.25m
- 1.31 g/t Au over 14.15m from 544.0m depth in MQD-22-080
- 2.07 g/t Au over 6.0m from 422.0m depth in MQD-22-085 and
- 1.07 g/t Au over 15.0m from 457.0m
- 1.26 g/t Au over 7.15m from 573.85m
- 1.07 g/t Au over 24.7m from 369.0m depth in MQD-22-087 and
- 2.15 g/t Au over 5.0m from 489.0m
- 1.75 g/t Au over 8.05m from 513.95m
- 2.11 g/t Au over 30.75m from 536.9m including
  - 11.5 g/t Au over 3.1m from 555.2m
- 1.31 g/t Au over 63.6m from 427.0m depth in MQD-22-090A
  - 2.07 g/t Au over 32.0m from 439.0m
A new parallel mineralized shear structure has been discovered 150m south of the main QES system containing high grade mineralization within a sheared intermediate volcanic package with best intercepts of:
- 3.44 g/t Au over 5.8m from 246.4m depth in MQD-22-080
- 1.22 g/t Au over 4.0m from 206.0m depth in MQD-22-087
- 1.15 g/t Au over 7.3m from 75.0m depth in MQD-22-090A

President and CEO Brett Richards stated: “The results from these drill holes in the QES Zone are part of a 52-hole data set that was not included in the recent mineral resource estimate. They confirm our belief that there are additional high-grade shear zones within the deposit that will potentially add to the shear domain component of the mineral resource that we anticipate will be prioritized in the mining schedule when we move towards conducting a preliminary economic analysis next year.”

Technical Overview

Figure 1 shows the better intercepts in plain view and Figure 2 is a typical section through hole MQD-22-087. Table 1 shows the significant intercepts. Table 2 shows the drill hole locations.

Figure 1: Drill plan showing best of several +1 g/t Au intercepts relative to shear and intrusion domains

To view an enhanced version of Figure 1, please visit:
https://images.newsfilecorp.com/files/8051/145867_cbaba705c4a3bbcb_002full.jpg

Figure 2: Drill section through MQD-22-0087 relative to shear and intrusion domains

To view an enhanced version of Figure 2, please visit:
https://images.newsfilecorp.com/files/8051/145867_cbaba705c4a3bbcb_003full.jpg

Results have been received for six holes that have infilled areas of the QES Zone that are between sections drilled by historic holes with collar survey problems. As a result, they will replace the low-confidence historic holes in the upcoming resource model update.

A seventh hole was drilled to the southeast of the QES Zone to investigate two historical showing along a parallel structure of the QES Zone but did not intersect significant mineralization.

As with the historic holes, these holes intersected several broad zones of low-grade mineralization within the altered diorite intrusion host. Examples include 0.77 g/t Au over 83m from 493m depth in MQD-22-075; 0.41 g/t Au over 32.45m from 437.55m and 0.71 g/t Au over 131.1m from 493m in MQD-22-076; 0.54 g/t Au over 102m from 476m and 0.39 g/t Au over 27.95m from 643m in MQD-22-080; 0.78 g/t Au over 70m from 419m and 0.50 g/t Au over 28.75m from 521.25m in MQD-22-085; 0.50 g/t Au over 115.9m from 408.1m in MQD-22-087; and 0.48 g/t Au over 27.45m from 552.05m in MQD-22-090A.

All these low-grade zones occur as envelopes to higher-grade structures that form a three-dimensional, anastomosing shear network that has developed in response to strain on the altered diorite intrusion. Results include the broad zones of +1 g/t Au mineralization shown in the highlights (e.g., 1.31 g/t Au over 63.6m from 427m depth in MQD-22-090A) and several narrow high-grade intervals, including 10.1 g/t Au over 0.7m from 545.8m and 36.9 g/t Au over 1m from 577m in MQD-22-076; 10.0 g/t Au over 1m from 427m in MQD-22-085; 20.6 g/t Au over 0.9m from 370.65m, 28.3 g/t Au over 0.3m from 540.3m and 11.5 g/t Au over 3.1m from 555.2m in MQD-22-087; and 19.4 g/t Au over 1.15m from 455.85m in MQD-22-090A.

An additional parallel shear was discovered within the intermediate volcanic package approximately 150m south of the main QES system which contains broad intercepts of low-grade mineralization including 0.91 g/t over 24.8m from 246.4m in MQD-22-080; 0.33 g/t over 45.7m from 150.0m in MQD-22-085; 0.42 g/t over 39.0m from 189.0m in MQD-22-087 containing internal higher grade intercepts including 3.44 g/t Au over 5.8m from 246.4m depth in MQD-22-080; 1.22 g/t Au over 4.0m from 206.0m depth in MQD-22-087; 1.15 g/t Au over 7.3m from 75.0m depth in MQD-22-090A.

Importantly, these intercepts have identified additional high-grade shears not modelled in the recent Mineral Resource.

Pete Flindell, VP Exploration for Goldshore, said, “These drill results confirm high-grade shears that we have modelled at the QES Zone and confirmed additional shears that we expect to include in the next mineral resource update early next year.”

Table 1: Significant downhole gold intercepts

HOLE ID	FROM	TO	LENGTH (m)	TRUE WIDTH (m)	CUT GRADE (g/t Au)	UNCUT GRADE (g/t Au)
MQD-22-075	243.00	264.00	21.00	15.4	0.47	0.47
including	254.00	256.40	2.40	1.8	1.54	1.54
	468.00	476.90	8.90	6.8	0.45	0.45
	493.00	576.00	83.00	64.6	0.77	0.77
including	502.00	508.00	6.00	4.6	1.51	1.51
and	530.00	560.10	30.10	23.5	1.47	1.47
	595.25	610.00	14.75	11.7	0.54	0.54
including	596.00	599.00	3.00	2.4	1.13	1.13

MQD-22-076	192.00	196.00	4.00	2.8	0.46	0.46
	214.00	216.00	2.00	1.4	0.39	0.39
	355.00	358.15	3.15	2.4	0.38	0.38
	437.55	470.00	32.45	25.0	0.41	0.41
including	453.00	456.70	3.70	2.9	1.52	1.52
	483.50	489.40	5.90	4.6	0.35	0.35
	493.00	624.10	131.10	103.8	0.71	0.77
including	545.80	546.50	0.70	0.6	10.1	10.1
and	576.00	581.00	5.00	4.0	7.07	8.45
including	577.00	578.00	1.00	0.8	30.0	36.9
and	602.25	609.00	6.75	5.4	1.87	1.87
	641.00	644.00	3.00	2.4	0.46	0.46

MQD-22-080	82.75	86.60	3.85	2.6	0.35	0.35
	131.40	143.75	12.35	8.5	0.63	0.63
	181.30	187.80	6.50	4.6	0.40	0.40
	209.90	220.85	10.95	7.7	0.57	0.57
	246.40	271.20	24.80	17.7	0.91	0.91
including	246.40	252.20	5.80	4.1	3.44	3.44
	355.00	369.00	14.00	10.2	0.57	0.57
including	361.70	363.70	2.00	1.5	1.67	1.67
	382.00	385.45	3.45	2.5	0.63	0.63
	398.50	401.30	2.80	2.1	0.58	0.58
	418.00	421.00	3.00	2.2	0.54	0.54
	429.20	434.00	4.80	3.6	0.35	0.35
	458.00	460.70	2.70	2.0	0.59	0.59
	476.00	578.00	102.00	79.7	0.54	0.54
including	524.00	528.00	4.00	3.1	1.32	1.32
and	544.00	558.15	14.15	11.2	1.31	1.31
	613.00	616.00	3.00	2.4	0.37	0.37
	624.10	633.00	8.90	7.3	0.30	0.30
	643.00	670.95	27.95	23.1	0.39	0.39

MQD-22-085	63.60	74.10	10.50	7.1	0.38	0.38
	116.15	118.35	2.20	1.5	1.57	1.57
	150.00	195.70	45.70	32.2	0.33	0.33
	248.00	250.00	2.00	1.4	0.39	0.39
	256.00	258.00	2.00	1.4	0.41	0.41
	284.80	288.05	3.25	2.4	0.91	0.91
including	286.00	288.05	2.05	1.5	1.30	1.30
	337.00	342.00	5.00	3.7	0.30	0.30
	362.00	371.65	9.65	7.2	0.31	0.31
	382.45	388.00	5.55	4.1	0.30	0.30
	390.80	410.90	20.10	15.0	0.31	0.31
	419.00	489.00	70.00	53.1	0.78	0.78
including	422.00	428.00	6.00	4.5	2.07	2.07
including	427.00	428.00	1.00	0.8	10.0	10.0
and	443.00	446.00	3.00	2.3	1.09	1.09
and	457.00	472.00	15.00	11.4	1.07	1.07
and	481.00	485.00	4.00	3.1	2.10	2.10
	506.00	508.00	2.00	1.5	0.67	0.67
	521.25	550.00	28.75	22.4	0.50	0.50
	573.85	581.00	7.15	5.7	1.26	1.26
	665.20	671.55	6.35	5.1	0.35	0.35

MQD-22-087	78.00	81.55	3.55	2.4	0.43	0.43
	92.00	109.00	17.00	11.6	0.33	0.33
	189.00	228.00	39.00	27.3	0.42	0.42
including	206.00	210.00	4.00	2.8	1.22	1.22
	249.75	261.00	11.25	8.0	0.49	0.49
	289.50	298.70	9.20	6.6	0.42	0.42
including	294.50	296.65	2.15	1.6	1.07	1.07
	342.00	349.65	7.65	5.6	0.40	0.40
	369.00	393.70	24.70	18.2	1.07	1.09
including	370.65	371.55	0.90	0.7	20.6	20.6
	408.10	524.00	115.90	87.3	0.50	0.50
including	425.30	429.50	4.20	3.1	1.28	1.28
and	489.00	494.00	5.00	3.8	2.15	2.15
and	513.95	522.00	8.05	6.1	1.75	1.75
	536.90	567.65	30.75	23.6	2.11	2.11
including	539.55	567.65	28.10	21.6	2.23	2.23
including	540.30	540.60	0.30	0.2	28.3	28.3
and	555.20	558.30	3.10	2.4	11.5	11.5
	579.00	592.00	13.00	10.1	0.37	0.37
	628.65	634.00	5.35	4.2	0.48	0.48

MQD-22-090A	75.00	82.30	7.30	3.8	1.15	1.15
including	78.00	81.55	3.55	1.8	2.05	2.05
	94.00	98.00	4.00	2.1	0.54	0.54
	133.00	146.00	13.00	7.0	0.35	0.35
	193.00	196.00	3.00	1.6	0.39	0.39
	227.70	230.60	2.90	1.6	0.53	0.53
	238.55	240.85	2.30	1.3	0.42	0.42
	245.00	252.25	7.25	4.0	0.35	0.35
	287.35	292.75	5.40	3.0	0.44	0.44
	427.00	490.60	63.60	37.7	1.31	1.31
including	427.00	429.00	2.00	1.2	1.10	1.10
and	439.00	471.00	32.00	19.0	2.07	2.07
including	455.85	457.00	1.15	0.7	19.4	19.4
	503.85	508.00	4.15	2.5	0.73	0.73
	519.00	541.00	22.00	13.3	0.35	0.35
including	525.00	527.00	2.00	1.2	1.47	1.47
	552.05	579.50	27.45	16.8	0.48	0.48
including	574.00	576.00	2.00	1.2	1.14	1.14
Intersections calculated above at 0.3 g/t Au cut off with a top cut of 30 g/t Au and a maximum internal waste interval of 10 metres. Bordered intervals are intersections calculated above a 1.0 g/t Au cut off. Intervals in bold are those with a grade thickness factor exceeding 20 gram x metres / tonne gold. True widths are approximate and assume a subvertical body.

Table 2: Location of drill holes in this press release

HOLE	EAST	NORTH	RL	AZIMUTH	DIP	EOH
MQD-22-075	670,308	5,379,250	443	336°	-47°	675.1
MQD-22-076	670,379	5,379,296	442	338°	-47°	651.0
MQD-22-080	670,462	5,379,398	450	335°	-50°	675.05
MQD-22-083	670,667	5,379,431	433	156°	-50°	630.1
MQD-22-085	670,636	5,379,537	441	336°	-49°	675.0
MQD-22-087	670,546	5,379,463	449	336°	-49°	675.0
MQD-22-090A	670,654	5,379,625	429	346°	-60°	606.0
Approximate collar coordinates in NAD 83, Zone 15N

Analytical and QA/QC Procedures

All samples were sent to ALS Geochemistry in Thunder Bay for preparation and analysis was performed in the ALS Vancouver analytical facility. ALS is accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025. Samples were analyzed for gold via fire assay with an AA finish (“Au-AA23”) and 48 pathfinder elements via ICP-MS after four-acid digestion (“ME-MS61”). Samples that assayed over 10 ppm Au were re-run via fire assay with a gravimetric finish (“Au-GRA21”).

In addition to ALS quality assurance / quality control (“QA/QC”) protocols, Goldshore has implemented a quality control program for all samples collected through the drilling program. The quality control program was designed by a qualified and independent third party, with a focus on the quality of analytical results for gold. Analytical results are received, imported to our secure on-line database and evaluated to meet our established guidelines to ensure that all sample batches pass industry best practice for analytical quality control. Certified reference materials are considered acceptable if values returned are within three standard deviations of the certified value reported by the manufacture of the material. In addition to the certified reference material, certified blank material is included in the sample stream to monitor contamination during sample preparation. Blank material results are assessed based on the returned gold result being less than ten times the quoted lower detection limit of the analytical method. The results of the on-going analytical quality control program are evaluated and reported to Goldshore by Orix Geoscience Inc.

About Goldshore

Goldshore is an emerging junior gold development company, and owns the Moss Lake Gold Project located in Ontario. Wesdome Gold Mines Ltd. is currently a large shareholder of Goldshore with an approximate 27% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Lake Gold Project through the next stages of exploration and development.

About the Moss Lake Gold Project

The Moss Lake Gold Project is located approximately 100 km west of the city of Thunder Bay, Ontario. It is accessed via Highway 11 which passes within 1 km of the property boundary to the north. The Moss Lake Gold Project covers 14,292 hectares and consists of 282 unpatented and patented mining claims.

The Moss Lake Gold Project hosts a number of gold and base metal rich deposits including the Moss Lake Deposit (Table 3), the East Coldstream Deposit (Table 4), the historically producing North Coldstream Mine (Table 5), and the Hamlin Zone, all of which occur over a mineralized trend exceeding 20 km in length.

The Moss Lake Deposit hosts an estimated inferred mineral resource of 4.17 Moz Au (see Goldshore’s news release dated November 15, 2022). A technical report is being prepared in accordance with National Instrument 43-101 (“NI 43-101“) and will be available on the Company’s website and SEDAR within 45 days of November 15, 2022.

A historical mineral resource estimate (the “East Coldstream Historical Estimate“) was completed on the East Coldstream Deposit in 2011 by Foundation Resources Inc.²^,3 The East Coldstream Deposit is a shear-hosted disseminated-style gold deposit which locally outcrops at surface. It has been drilled over a 1.3 km length and to depths of 200 m with 138 holes completed between 1988 and 2017. The deposit remains largely open at depth and may have the potential for expansion along strike. Historic drill hole highlights from the East Coldstream Deposit include 4.86 g/t Au over 27.3 m in C-10-15.

The historically producing North Coldstream Mine is reported to have produced significant amounts of copper, gold and silver⁴ from mineralization with potential iron-oxide-copper-gold deposit style affinity. The exploration potential immediately surrounding the historic mining area is not currently well understood and historic data compilation is required.

The Hamlin Zone is a significant occurrence of copper and gold mineralization, and also of potential iron-oxide-copper-gold deposit style affinity. Between 2008 and 2011, Glencore tested Hamlin with 24 drill holes which successfully outlined a broad and intermittently mineralized zone over a strike length of 900 m. Historic drill hole highlights from the Hamlin Zone include 0.9 g/t Au and 0.35% Cu over 150.7 m in HAM-11-75.

The Moss Lake, East Coldstream and North Coldstream deposits sit on a mineral trend marked by a regionally significant deformation zone locally referred to as the Wawiag Fault Zone in the area of the Moss Lake Deposit. This deformation zone occurs over a length of approximately 20 km on the Moss Lake Gold Project and there is an area spanning approximately 7 km between the Moss Lake and East Coldstream deposits that is significantly underexplored.

Table 3: Mineral Resource Estimate (Moss Lake Deposit) ¹

Inferred Resources (Domains)	Tonnes (Mt)	Grade (g/t Au)	Contained Metal (Moz AU)
Shear	34.7	2.0	2.20
Intrusion	87	0.7	1.97
TOTAL	121.7	1.1	4.17

Notes:

(1) The Moss Lake Deposit hosts an estimated inferred mineral resource of 4.17 Moz Au (see Goldshore’s news release dated November 15, 2022). A technical report is being prepared in accordance with NI 43-101 and will be available on the Company’s website and SEDAR within 45 days of November 15, 2022.

Table 4: Historical Mineral Resources (East Coldstream Deposit) ²^,3

	INDICATED	INFERRED
	Tonnes	Grade (g/t Au)	Oz Au	Tonnes	Grade (g/t Au)	Oz Au
East Coldstream Total	3,516,700	0.85	96,400	30,533,000	0.78	763,276

Notes:
(2) Source: McCracken, T. “Technical Report and Resource Estimate on the Osmani Gold Deposit, Coldstream Property, Northwestern Ontario”, prepared for Foundation Resources Inc. and Alto Ventures Ltd. The East Coldstream Historical Estimate is based on a 0.4 g/t Au cut-off grade. The qualified persons for the East Coldstream Historical Estimate are Todd McCracken, P.Geo. (Tetratech Wardrop), and Jeff Wilson, Ph.D., P.Geo. (Tetratech Wardrop), and the effective date of the East Coldstream Historical Estimate is December 12, 2011. Resources are presented unconstrained, undiluted and in situ. The East Coldstream Historical Estimate includes 2 gold-bearing zones. A cut-off grade of 0.4 g/t Au was selected as the official resource cut-off grade. The East Coldstream Historical Estimate is based on 116 diamond drill holes drilled from 1986 to 2011. A fixed density of 2.78 g/cm3 was used. Capping was established at 5.89 g/t Au and 5.70 g/t Au for domains EC-1 and EC-2, respectively. This is supported by statistical analysis and the high grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Datamine Studio 3 version 3.20.5321.0. Resource categorization is based on spatial continuity based from the variography of the assays within the drillholes. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.

(3) The reader is cautioned that the East Coldstream Historical Estimate is considered historical in nature and as such is based on prior data and reports prepared by previous property owners. The reader is cautioned not to treat it, or any part of it, as current mineral resources or reserves. The Company has determined this historical resource is reliable, and relevant to be included here in that it demonstrates simply the mineral potential of the Moss Lake Gold Project. A qualified person has not done sufficient work to classify the East Coldstream Historical Estimate as a current resource and Goldshore is not treating the East Coldstream Historical Estimate as a current resource. Significant data compilation, re-drilling, re-sampling and data verification may be required by a qualified person before the East Coldstream Historical Estimate can be classified as a current resource. There can be no assurance that any of the historical mineral resources, in whole or in part, will ever become economically viable. In addition, mineral resources are not mineral reserves and do not have demonstrated economic viability. Even if classified as a current resource, there is no certainty as to whether further exploration will result in any inferred mineral resources being upgraded to an indicated or measured mineral resource category. The East Coldstream Historical Estimate relating to inferred mineral resources was calculated using prior mining industry standard definitions and practices for estimating mineral resource and mineral reserves. Such prior definitions and practices were utilized prior to the implementation of the current standards of the Canadian Institute of Mining for mineral resource estimation, and have a lower level of confidence.

Table 5: Reported Historical Production (North Coldstream Deposit) ⁴

Deposit	Tonnes	Cu %	Au g/t	Ag	Cu lbs	Au oz	Ag oz
Historical Production	2,700,0000	1.89	0.56	5.59	102,000,000	44,000	440,000

Note:

(4) Source: Schlanka, R., 1969. Copper, Nickel, Lead and Zinc Deposits of Ontario, Mineral Resources Circular No. 12, Ontario Geological Survey, pp. 314-316.

Peter Flindell, P.Geo., MAusIMM, MAIG, Vice President – Exploration of the Company, a qualified person under NI 43-101 has approved the scientific and technical information contained in this news release.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

For More Information – Please Contact:

Brett A. Richards
President, Chief Executive Officer and Director
Goldshore Resources Inc.

P. +1 604 288 4416 M. +1 905 449 1500
E. brichards@goldshoreresources.com
W. www.goldshoreresources.com

Facebook: GoldShoreRes | Twitter: GoldShoreRes | LinkedIn: goldshoreres

Cautionary Note Regarding Forward-Looking Statements

This news release contains statements that constitute “forward-looking statements.” Such forward looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur.

Forward-looking statements in this news release include, among others, statements relating to expectations regarding the exploration and development of the Moss Lake Gold Project, plans to conduct a preliminary economic assessment and timing thereof, updating the mineral resource estimates, the filing of a technical report to support the mineral resource estimate at the Moss Lake Deposit, and other statements that are not historical facts. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors and risks include, among others: the Company may require additional financing from time to time in order to continue its operations which may not be available when needed or on acceptable terms and conditions acceptable; compliance with extensive government regulation; domestic and foreign laws and regulations could adversely affect the Company’s business and results of operations; the stock markets have experienced volatility that often has been unrelated to the performance of companies and these fluctuations may adversely affect the price of the Company’s securities, regardless of its operating performance; the ongoing military conflict in Ukraine; and other risk factors outlined in the Company’s public disclosure documents.

The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. The Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/145867

Tags #BrettRichards, #GoldShoreResources, #GSHR, #InvestingInBatteryMetals, #InvestingInCopper, #JuniorMining, #MauriceJackson, #MilesFranklin, #MossLakeProject, #PreciousMetals, #ProvenAndProbable, Canadian Mining Stocks, maurice jackson, proven and probable

Base Metals Energy Exclusive Interviews Junior Mining Precious Metals Rover Metals

Rover Metals – Definitive Agreement Let’s Go Lithium Project

Post author By admin
Post date November 25, 2022

Website: https://rovermetals.com/
Fact Sheet: https://rovermetals.com/s/Rover_FactSheet_v12.pdf
Presentation: https://bit.ly/3XumHyn

Check out this great interview with Judson Culter the CEO of Rover Metals, as the company is expanding its portfolio onto critical minerals. Will shareholders have a positive reaction to the new portfolio diversification? Find out right here!

A CRITICAL MINERALS EXPLORATION COMPANY
Rover Metals (“Rover”) is a publicly traded Canadian junior mining company specialized in North American critical minerals and precious metal development-stage mining projects. Rover’s twelve month forward-looking plan is to advance exploration at our Nevada Claystone Lithium project and at our Northern Canada Zinc-Copper project, located near the city of Yellowknife, NT, Canada. The Indian Mountain Lake Project is the Company’s first district scale land package, representing approximately 30,000 acres of greenstone belt.

Rover Metals also has 100% ownership of several gold mining assets located near to the city of Yellowknife, NT. Rover obtained a public listing for its securities on the TSX Venture Exchange as a Tier II Mining Issuer on June 26, 2018.

Rover Metals trades under the symbol “ROVR” on the TSXV. Rover also obtained a public co-listing of its securities on the OTCQB on January 17, 2019 (OTCQB: ROVMF), and on the Frankfurt Stock Exchange on February 1, 2021 (FRA: 4XO).

The Company is run by an experienced management team and board that are career mining executives. Our management team and board have a proven history financing the development of mining projects, taking them into production, and re-selling them.

The Best Video on Why and When to Buy and Sell Physical Precious Metals:

I’m a licensed broker for Miles Franklin Precious Metals Investments, The Only Online Dealer that is Licensed and Bonded (Period)! Where we provide unlimited options to expand your precious metals portfolio, from:

Website| www.provenandprobable.com
Call me directly at 855.505.1900 or email: Maurice@MilesFranklin.com
Precious Metals FAQ – https://www.milesfranklin.com/faq-maurice/

Tags #InvestingInBatteryMetals, #JudsonCulter, #JuniorMining, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, #RoverMetals, #ROVR, Letsgolithiumproject, maurice jackson, proven and probable

Base Metals Collective Mining Energy Exclusive Interviews Junior Mining Precious Metals

Collective Mining – Extends Exploration Program on Apollo

Post author By admin
Post date November 23, 2022

Joining us for a conversation is Ari Sussman of Collective Mining, Colombia’s Newest Exploration Company. Collective Mining has just announced another significant development coming from the flagship Guayabales Project demonstrating continuity with a new Strike of 385 Meters, Width at 350 Meters, and Vertical 825 Meters! In this interview with provide shareholders with an update on the Collective Mining’s Exploration Program, which was just extended another 3,000 Metres on the back of a successful $10 Million Finance.

In this video, we’ll be highlighting Collective Mining and their recent Breccia expansion at the Apollo Target. Collective Mining is becoming a front runner in the junior mining space. With their flagship Guayables Project, Collective Mining is looking to materially expand their current mineral holdings.

If you’re interested in junior mining stocks, then you’ll want to check out this video! We’ll discuss Collective Mining’s new project, Apollo, and what this could mean for the junior mining space. Make sure to subscribe to our channel so you never miss an update!

In this video, I’m discussing the flagship Guayabales Project, specifically the Apollo Target with Aris Sussman of Collective Mining. The expansion at the Apollo gold project in Colombia, and how this could lead to further gains for Collective Mining shareholders.

COLLECTIVE MINING:
Listing:(TSX.V: CNL | OTCQX: CNLMF)
Website: https://www.collectivemining.com/
Press Release: https://provenandprobable.com/step-out-drilling-materially-expands-the-overall-dimensions-of-collective-minings-main-breccia-discovery-at-apollo/
Corporate Presentation: https://www.collectivemining.com/investors/presentations/
Facebook: https://www.facebook.com/CollectiveMiningCol
Twitter: https://twitter.com/CollectiveMini1
LinkedIn: https://www.linkedin.com/company/collectivemining/?originalSubdomain=co
Instagram: https://www.instagram.com/collectivemining/
Youtube: https://www.youtube.com/channel/UC0J8zpCq0TNhJQePKdCrJag

Collective Mining: Rapidly advancing, large scale gold-copper-silver-moly porphyry and breccia targets with related high-grade vein systems in the mining-friendly department of Caldas in Colombia

Collective Mining’s two projects the Guayabales (Flagship) and the San Antonio (Secondary) are situated in Marmato, an underexplored yet multi-million ounce, high-grade gold and silver district located in the Middle Cauca belt in Colombia. With six out of eleven targets drilled, the Company has made three promising grassroot discoveries to date and is awaiting assay results on a potential fourth discovery. Drilling activity continues at a brisk pace with a 20,000+ metre drill program in 2022.

The Best Video on WHY and WHEN to Buy and Sell Physical Precious Metals:

Proven and Probable
Where we deliver Mining Insights & Bullion Sales. I’m a licensed broker for Miles Franklin Precious Metals Investments, The Only Online Dealer that is Licensed and Bonded (Period)! Where we provide unlimited options to expand your precious metals portfolio, from

Website| www.provenandprobable.com
Call me directly at 855.505.1900 or email: Maurice@MilesFranklin.com
Precious Metals FAQ – https://www.milesfranklin.com/faq-maurice/

Tags #AriSussman, #CNL, #CollectiveMining, #Guayabales, #InvestingInBatteryMetals, #JuniorMining, #MauriceJackson, #ProvenAndProbable, Apollo Target

Base Metals Energy Granite Creek Copper Junior Mining Metallic Group Precious Metals

CORRECTING AND REPLACING: Granite Creek Copper Identifies New, High-Priority Resource Expansion Targets at Carmacks Copper-Gold-Silver Project in Yukon Canada

Post author By admin
Post date November 22, 2022

This press release corrects, replaces and entirely supersedes the prior version published on November 21, 2022 at 4:00 PM ET

VANCOUVER, BC / ACCESSWIRE / November 22, 2022 / Granite Creek Copper Ltd. (TSXV:GCX)(OTCQB:GCXXF) (“Granite Creek” or the “Company“) is pleased to announce results from an Induced Polarization (“IP”) survey conducted on the Company’s 100%-owned Carmacks copper-gold-silver project (“Carmacks” or the “Deposit”) in the Minto Copper District of central Yukon, Canada. The large, highly prospective, potential resource expansion targets identified adjacent to or near the proposed open pits warrant follow-up exploration in upcoming campaigns. The Company further announces it has closed the second and final tranche of the private placement financing described in a news release dated October 5, 2022.

President & CEO, Tim Johnson, stated, “These multiple new zones and targets adjacent to the conceptual open pits, as defined by the March NI 43-101 Mineral Resource Estimate update, further highlight the prospectivity of our Carmacks project. Our team continues to do excellent work at Carmacks and we are confident in our ability to expand known mineralization and make new discoveries in the lesser explored parts of the 176km² project. The current focus is the completion of the upcoming PEA and we look forward to reporting on the robust economics of the Carmacks project in the near term.”

Survey Overview

The first survey line (Line 1100S) was conducted over Zone 147 to investigate the correlation between known copper sulphide mineralization and the chargeability response from the Simcoe Geophysics deep-penetrating IP survey (see Figure 2 below). Subsequent survey lines were conducted over near-deposit target areas.

The results of the survey were enhanced by Resistivity Scaled Chargeability (“RSC”). RSC is a ratio of chargeability to resistivity (electrical properties measured by the IP survey) with the applied ratio determined by comparing various ratios to known mineralized bodies. The well-defined Zone 147 was used as a model to determine the RSC ratio that best fit the known mineralization. (See Figure 4 below).

Figure 1 – Carmacks Copper-Gold Project Location