Categories
Base Metals Collective Mining Energy Junior Mining Precious Metals

Collective Mining Intersects 384.7 Metres at 2.46 g/t Gold Equivalent Including 109.8 Metres grading 4.14 g/t Gold Equivalent from Surface at the Apollo Porphyry System

  • Assay results for drill hole APC-31, which is the first hole to test the mineralized outcrop of the Apollo porphyry system (*formerly known as the Main Breccia discovery), has intersected significant continuous high-grade copper-silver-gold mineralization from surface as follows:
  • High-grade oxide mineralization was encountered over the initial 42.35 metres of the drill hole averaging 5.08 g/t gold equivalent.
  • Five additional drill holes have been completed in 2023 to date from drill Pads 6 and 7. All five holes appear to have cut significant mineralization beginning at bedrock with the three completed holes from Pad 6 intersecting more than 350 metres of continuous mineralization and the two outstanding holes from Pad 7 intersecting more than 100 metres and 170 metres of continuous mineralization, respectively. Assay results for these holes are expected in the near term.
  • Outcrop mapping and sampling in the south and central portions of the Apollo porphyry system has outlined a 130 metres X 130 metres area of known surface mineralization which is open in all directions. Two new pads (9 and 10) are under construction and once operational will provide more drilling options to test this expanding area of surface and shallow mineralization.

Ari Sussman, Executive Chairman commented: “2023 is off to an excellent start to say the least. Not only did drill hole APC-31 confirm for the first time that the high-grade copper-silver-gold mineralization in the Apollo porphyry system comes right to surface, but also that there is a significant zone of high-grade oxide mineralization. We have truly discovered a remarkable porphyry system at Apollo characterized by unusually high-grades of combined gold, silver and copper. We are equally fortunate that our Guayabales project is located in a mining camp contiguous to the multi-million-ounce Marmato mine and are confident that our Apollo porphyry system will play a key role in Colombia’s decarbonization strategy. Our plan in 2023 is to remain aggressive with both drilling and ESG so that our “Collective” model for mining yields dividends for stakeholders and shareholders alike.”

TORONTO, Feb. 23, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from the first drill hole of 2023 as part of the Company’s phase II drill program at the Guayabales project located in Caldas, Colombia. The aim of the phase II program is to test and define through drilling the shallow portion of the Apollo porphyry system (*formerly known as the Main Breccia discovery) as well as continue expanding the system through step-out drilling. The Apollo porphyry deposit is a high-grade, bulk tonnage copper-silver-gold system, which owes its excellent metal endowment to an older porphyry copper-silver and gold mineralization being overprinted by younger precious metal rich, carbonate base metal vein systems (low and intermediate sulphidation) within a magmatic, hydrothermal intermineral breccia body currently measuring 395 metres x 385 metres x 915 metres and open for expansion.

Details (See Table 1 and Figures 1-3)

Assay results for the first drill hole (APC-31) from the 2023 phase II program is announced in this press release. The Phase II drilling program of 2023 is advancing on schedule with six holes completed and a further three in progress. The aim of this program is to define the high-grade mineralization and dimensions of the Apollo porphyry near surface while continuing to expand the size of the system through step-out drilling.

To date, a total of 32 drill holes (approximately 15,400 metres) have been completed and assayed at the Apollo target with the majority of the holes testing the Apollo porphyry system.

Assay results and geological observations of APC-31 are summarized below.

APC-31 was a shallow hole, drilled steeply to the northwest from Pad 6 to a maximum depth of 389.6 metres (370 metres vertical). The hole was designed to exclusively test the upper portion of the porphyry system from a location where the system outcrops at surface. The hole intersected continuous mineralization from surface down to its final depth where it was terminated while still in strong mineralization. APC-31 is the highest-grade accumulation of mineralization reported from drilling to date and averaged:

  • 384.7 metres @ 2.46 g/t gold equivalent (consisting of 1.17 g/t gold, 43 g/t silver and 0.37% copper) and including;

The mineralized interval starts from surface to 30 metres depth within saprolite material followed by an additional 17.5 metres of saprock with iron oxides and sulphides to 47.25 metres before transitioning into fresh rock consisting of chalcopyrite (0.5% to 1.5%), pyrite (1% to 2.5%) and some pyrrhotite (~1%). The mineralization is overprinted by carbonate-base metal veins containing sphalerite and galena and high grades of gold. Gold grades are significantly higher in the oxidized portion of the intercept down to 47.25 metres, while copper and silver grades are reduced within the same interval presumably due to weathering.

Outcrop mapping and sampling in the south and central portions of the system has outlined a 130 metre-by-130 metre area of known surface mineralization, which is open in all directions. 2023 drill Pads 6 and 7 have been designed to achieve the objective of understanding the styles and tenor of the shallow, high-grade mineralization from surface down to depths of up to 400 metres. Visual observations from five completed holes that are awaiting assay results in the near term indicate continuous intercepts from surface over core lengths ranging from more than 100 metres to more than 350 metres. The Company presently has three diamond drill rigs operating at the project.

Two new drill pads, numbered 9 and 10, are under construction to provide further drilling options to test and expand upon the area which the Apollo porphyry system outcrops at surface.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers a 1,000 metres X 1,200 metres area, and represents a large and unusually high-grade Au-Cu-Ag porphyry system. Mineralization styles include early-stage porphyry veining, inter-mineral breccia mineralization and multiple zones of late stage, sheeted, carbonate-base metal veins with high gold and silver grades. The Apollo target area is still expanding as the Company’s geologists find more outcrop areas with porphyry veining, breccia, and late stage, sheeted, carbonate base metal veins.

Table 1: Assays Results for APC-31

Hole IDFrom
(m)
To
 (m)
Intercept
(m)
Au
(g/t)
Ag
(g/t)
Cu
%
Mo
%
AuEq
(g/t)*
APC-314.90389.60384.701.17430.370.022.46
Including4.90325.70320.801.34490.440.022.84
4.90114.70109.803.15450.250.014.14
**4.9047.2542.354.81230.090.0015.08

*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.016 x 0.95) + (Cu (%) x 1.83 x 0.95)+ (Mo (%)*9.14 x 0.95) and CuEq (%) is calculated as follows:  (Cu (%) x 0.95) + (Au (g/t) x 0.51 x 0.95) + (Ag (g/t) x 0.01 x 0.95)+ (Mo(%)x 3.75 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Ag – $24/oz Mo US$20.00/lb and Au – US$1,500/oz and recovery rates of 95% for Au, Ag, Mo and Cu. Recovery rate assumptions are speculative as no metallurgical work has been completed to date. A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut
**Zone of Oxidation

Figure 1: Plan View of the Apollo Porphyry System (formerly known as the Main Breccia Discovery) Highlighting Drill Hole APC-31 (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View of the Apollo Porphyry System (formerly known as the Main Breccia Discovery) Highlighting Drill Hole APC-31 (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target Area (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target Area (CNW Group/Collective Mining Ltd.)
Figure 3: Core Photo Highlights from Drill Hole APC-31 (CNW Group/Collective Mining Ltd.)
Figure 3: Core Photo Highlights from Drill Hole APC-31 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper-silver-gold Apollo porphyry system. The Company’s near-term objective is to drill the shallow portion of the porphyry system while continuing to expansion the overall dimensions of the system, which remains open in all directions.

Management, insiders and close family and friends own nearly 52% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Categories
Base Metals Collective Mining Energy Junior Mining Precious Metals

Collective Mining Step-Out Drilling Intersects 601.65 Metres at 1.40 g/t Gold Equivalent and Extends the Main Breccia System at Apollo to the West and Depth

  • Step-out drill hole APC-28, which was drilled to the west from the eastern side of the Main Breccia system at Apollo cut the longest intercept to date as follows:
  • As a result of APC-28, the maximum width and vertical dimensions of the Main Breccia system have increased to 395 metres (previously 350 metres) and 915 metres (previously 825 metres), respectively.
  • Drill hole APC-28 bottomed while still in mineralization indicating that the Main Breccia system remains open for expansion to the west and at depth (as well as to the east and north based on previously announced assay results).
  • Hole APC-30 was drilled southwards on the western side of the deposit and intercepted the Main Breccia system over a broad interval as follows:
  • Four holes have now been completed into the Main Breccia system as part of the 2023 Phase II drill program at the Guayabales project. All four holes appear to have intercepted the Main Breccia system with mineralization beginning from surface.  Assay results for these holes are expected in the near term.

Ari Sussman, Executive Chairman commented: “The Main Breccia system at Apollo continues to yield positive surprises. The Company drilled three long holes in 2022, APC-17, APC-22 and APC-28, with each hole expanding the size of the deposit and bottoming while still in mineralization. In addition, 2023 drilling is off to an excellent start with the initial four holes testing the Main Breccia system all intersecting mineralization beginning at surface. Our aim for 2023 is to define the newly discovered high-grade and near surface mineralization while continuing to be aggressive with expansion drilling. Without question, we have discovered a large copper-silver-gold deposit in a mining friendly jurisdiction of Colombia which will play a vital role in the country’s aggressive decarbonization goals.”

TORONTO, Feb. 15, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from a further three holes drilled into the Main Breccia system at the Apollo target (“Apollo”), which is part of the Guayabales project located in Caldas, Colombia. The Main Breccia is a high-grade, bulk tonnage copper-silver-gold porphyry-related system, which owes its excellent metal endowment to multiple phases of mineralization which includes older copper-silver-gold porphyry mineralization and younger, overprinting, low and intermediate sulphidation, precious metal rich sheeted carbonate base metal vein systems.

Details (See Table 1 and Figures 1–5)

Assay results for all thirty-one diamond drill holes from the Phase I drilling program for 2022 have now been announced at Apollo. The Phase II drilling program for 2023 is advancing on schedule with assay results for the first holes expected in the near term. This press release summarizes assay results of the final three diamond drill holes from the Phase I program with results summarized below.

APC-28 was a step-out hole drilled steeply to the west from Pad 2 to a maximum depth of 956.35 metres (915 metres vertical) and was designed to test western and depth extensions to the Main Breccia system. The hole intersected the longest interval drilled to date within the system, commencing at 354.70 metres down hole (335 vertical) and averaging:

  • 601.65 metres @ 1.4 g/t gold equivalent and including internal intervals of:

The mineralized angular breccia of this intercept represents the largest accumulation of metal returned to date within the Main Breccia system and contains a sulphide matrix which includes 0.5% up to 2.5% chalcopyrite and between 1% and 3% pyrite plus some pyrrhotite. The breccia has been overprinted by zones of carbonate and base metal (sphalerite and galena) veins, which yield the higher gold equivalent intervals. APC-28 stopped in mineralized breccia due to rig constraints. This hole has extended the main breccia westwards by 115 metres and is the deepest intercept drilled to date outlining continuity of mineralized breccia to a vertical depth of approximately 915 metres below surface. APC-28 also represents the westernmost hole drilled into the Main Breccia system and demonstrates that the mineralization is thickening with depth and has an inverted funnel morphology as outlined in Figure 2 below. This western area of the deposit remains open for expansion as the hole stopped in strong mineralization.

As a result of drill hole APC-28, the overall volume of rock in which the Main Breccia system is located has grown in width to 395 metres (from 350 metres) and a vertical dimension of 915 metres (from 825 metres). The strike of the system remains the same at 385 metres.

APC-30 was drilled southwards from Pad 4 to a total length of 589 metres downhole and intersected mineralized breccia from 267.60 metres downhole (240 metres vertical), averaging:

  • 318.85 metres @ 1.10 g/t gold equivalent and including internal intervals of:

Gold, silver and copper mineralization relates to sulphides hosted within the angular breccia matrix with average concentrations of pyrite (2%) and chalcopyrite (0.5%). An upper zone of 60.8 metres bearing 2% to 3% chalcopyrite was intercepted at the beginning of the mineralized interval and a sheeted and overprinting sphalerite rich CBM vein zone of 81.4 metres was encountered from 472.3 metres downhole.

Reconnaissance hole APC-27 was drilled due east away from the Main Breccia system to test outcropping mineralization at surface. From 300.40 metres downhole (210 metres vertical depth) the Company intersected a new zone of continuous low-grade mineralization with assay results as follows:

  •  

Core logging of the breccia system at Apollo by the Company’s geologists has identified that the crackle breccia as seen in this newly discovered zone, is typically found both above and on the periphery of the more intensely mineralized angular breccia phase. As a result of this assessment, the Company may have drilled over top of an angular breccia zone with stronger mineralization than was intercepted in APC-27. Further exploratory drilling will be undertaken in this area.

The Company’s Phase II 2023 program is well underway with three rigs focused on drilling near surface, high grade mineralization below mineralized outcrops in the southern and central areas of the Main Breccia system from newly constructed pads 6 and 7. To date, four shallow holes have been completed and confirm continuous mineralized angular breccia from surface. Three of these holes were drilled from Pad 6 and were terminated while still in strong mineralization. The fourth hole from Pad 7 appears to have drilled out the east side of the system indicating a more vertical orientation to the system that was previously modelled. Assay results are expected in the near term.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers a 1,000 metres X 1,200 metres area. The Apollo target area hosts the Company’s Main Breccia system and multiple additional untested breccia, porphyry and vein targets. The overall Apollo target area also remains open for further expansion.

Table 1: Apollo Target Assays Results for Holes APC-27, APC-28, and APC-30

Hole IDFrom
(m)
To
 (m)
Intercept
(m)
Au
(g/t)
Ag
(g/t)
Cu
%
Mo
%
AuEq
(g/t) *
APC-27299.50372.4072.900.3060.020.0020.44
APC-28286.60305.5518.951.11120.040.0011.30
And354.70956.35601.650.89240.100.0011.40
Incl354.70614.65259.951.21430.200.0012.15
713.10772.8059.702.04150.140.042.23
863.15868.805.652.00130.040.0012.17
APC-30267.60586.25318.650.61190.120.0021.10
Incl267.60328.4060.800.17480.400.0021.64
472.30553.7081.401.95180.040.0022.22
*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.016 x 0.95) + (Cu (%) x 1.83 x 0.95)+ (Mo (%)*9.14 x 0.95) and CuEq (%) is calculated as follows:  (Cu (%) x 0.95) + (Au (g/t) x 0.51 x 0.95) + (Ag (g/t) x 0.01 x 0.95)+ (Mo(%)x 3.75 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Ag – $24/oz Mo US$20.00/lb and Au – US$1,500/oz and recovery rates of 95% for Au, Ag, Mo and Cu. Recovery rate assumptions are speculative as no metallurgical work has been completed to date.
** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.
Figure 1: Plan View of the Main Breccia System at Apollo Highlighting Drill Holes APC-27, APC-28, APC-30 and Visual Results for APC-31, APC-33, APC-35 and APC-36 (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View of the Main Breccia System at Apollo Highlighting Drill Holes APC-27, APC-28, APC-30 and Visual Results for APC-31, APC-33, APC-35 and APC-36 (CNW Group/Collective Mining Ltd.)
Figure 2: East-West Cross Section Highlighting APC-28, ACP-30, and Visual Results for
APC-31 (CNW Group/Collective Mining Ltd.)
Figure 2: East-West Cross Section Highlighting APC-28, ACP-30, and Visual Results for APC-31 (CNW Group/Collective Mining Ltd.)
Figure 3: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 3: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 4: Core Photo Highlights from Drill Hole APC-28 (CNW Group/Collective Mining Ltd.)
Figure 4: Core Photo Highlights from Drill Hole APC-28 (CNW Group/Collective Mining Ltd.)
Figure 5: Core Photo Highlights from Drill Hole APC-30 (CNW Group/Collective Mining Ltd.)
Figure 5: Core Photo Highlights from Drill Hole APC-30 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver, and gold Main Breccia system. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia system while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 52% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Cision
Cision

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/February2023/15/c3425.html

Categories
Base Metals Collective Mining Energy Junior Mining Precious Metals

Ari Sussman from Collective Mining to Present at OTC Markets Group Precious Metals Virtual Investor Conference on February 15th, 2023

TORONTO, Feb. 8, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) will be presenting at the OTC Markets Group Precious Metals Virtual Investor Conference on Wednesday, February 15, 2023, at 11:00am ET.

Using the link below, investors can register and listen to the presentation, and take part in a question and answer session at the end. The presentation is expected to last 30 minutes.

DATE: Wednesday, February 15, 2023
TIME: 11:00am ET – 11:30am ET
LINK: https://bit.ly/3JCTs89

Please log in 5-10 minutes early to register. An archived webcast will also be made available after the event.

Ari Sussman, Executive Chairman of Collective Mining will be providing an overview and will discuss the Company’s “Main Breccia” discovery at the Apollo target. The Main Breccia discovery is a high-grade and bulk tonnage, copper-silver-gold porphyry-related breccia system characterized by two main, yet distinct pulses of mineralized fluids flooding the breccia with metals.

The Company’s Guayabales project is located in the mining-friendly department of Caldas, Colombia, in the heart of a long-established mining camp with ten fully permitted and operating mines located within three kilometres of the project. As a result, the Guayabales project is blessed with excellent infrastructure with roads and hydroelectric powerlines traversing the project and an abundant labour force located nearby in the townships of Supia and Marmato.

The phase II drilling program is underway with three rigs currently operating focused on testing near surface mineralization and expanding the dimensions of the Main Breccia system. Assay results are expected in the near term for the final three holes of the 2022 program, including westwards step-out hole APC-28, which cut more than 600 metres of continuous mineralization. Additionally, the first hole of the Phase II program is now complete, and core has been dispatched to the lab for assaying.

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own approximately 52% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Categories
Base Metals Collective Mining Junior Mining Precious Metals

Collective Mining Hosts the Vice Minister of Mines of Colombia to its Project Facilities in Supia, Colombia

TORONTO, Feb. 6, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce the Company had a recent opportunity to host the new Vice Minister of Mines of Colombia, Giovanni Franco, at its operation facilities in Supia, Colombia. The Vice Minister was visiting the region as part of the Ministry of Mines and Energy’s Social Mining Forum, which is a communication-based platform to discuss mining between the Ministry and municipalities.

During the visit, the Company had the opportunity to present its “Collective” model to mining, which is based on honesty, transparency, education and open dialogue with its stakeholders. The Company reviewed in detail its business and social approach within the area of influence of the Guayabales and San Antonio projects as it relates to various sustainability initiatives and exploration methodologies.

Upon completion of the visit, the Vice Minister of Mines recorded a short video summarizing his thoughts, which includes the following statement:

“What we see in the advances made by Collective Mining over the past three years is what we would like to have in Colombia. We wish to have 10, 50, 100 companies like Collective Mining all around Colombia to improve the geoscientific knowledge of the country, to improve the understanding of the subsoil resources that we have in Colombia to define public policies to improve the extraction of our subsoil resources.”

Please click on the link below to watch the full two-minute video testimony of the Vice Minister of Mines: https://youtu.be/-Ak3a_HJiPE

Figure 1 - Vice Minister of Mines Engaging with the Collective Mining Team in our Core Shack in Supía, Colombia (CNW Group/Collective Mining Ltd.)
Figure 1 – Vice Minister of Mines Engaging with the Collective Mining Team in our Core Shack in Supía, Colombia (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.
To see our latest corporate presentation and related information, please visit www.collectivemining.com.

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Categories
Base Metals Collective Mining Energy Junior Mining Precious Metals

Collective Mining Step-Out Drilling Confirms a Significant Southern Zone of Near Surface High-Grade Mineralization Including 32 Metres at 10.48 g/t Gold Equivalent

Drill hole APC-29 intercepted the highest grade near-surface copper-silver-gold mineralization encountered to date at the Main Breccia system at the Apollo target (“Apollo”) yielding 32 metres @ 10.48 g/t gold equivalent from 80 metres vertical. This hole was designed to test directly below where the Main Breccia system daylights at surface in the southern part of the system and to follow up on recently announced results for hole APC-22, which intersected 47.25 metres @ 5.45 g/t gold equivalent (see press release dated January 11, 2023). Further down-hole in APC-29, a broad zone of mineralization was encountered averaging 214.4 metres @ 1.04 g/t gold equivalent. APC-29 had to be abandoned short of target depth due to a fault while still in mineralization with the final 0.5 metre sample assaying 1.72 g/t gold, 39 g/t silver and 0.1% copper.

Drill hole APC-25 was designed as a step out hole along strike of the near surface high-grade zone of mineralization and intersected 106.85 metres @ 2.31 g/t gold equivalent starting at 65 metres vertical below surface. As a result, APC-25 has confirmed a shallow, westward expansion to the Main Breccia system and an apparent thickening to the high-grade near surface mineralized zone as the system is traced to the west.

Hole APC-26 was drilled to the northeast from Pad 4 and confirmed continuity of mineralization in that direction returning 136.9 metres @ 1.51 g/t gold equivalent contained within 311.2 metres at 1.04 g/t gold.

The phase II drilling program is underway with three rigs currently operating focused on testing near surface mineralization and expanding the dimensions of the Main Breccia system. Assay results are expected in the near term for the final three holes of the 2022 program, including westwards step-out hole APC-28, which cut more than 600 metres of continuous mineralization. Additionally, the first hole of the Phase II program is now complete, and core has been dispatched to the lab for assaying.

Ari Sussman, Executive Chairman commented: “Not only is the Main Breccia system at Apollo a large, bulk tonnage deposit but it now appears to host an outcropping and shallow zone of high-grade mineralization, which clearly enhances the value of this exciting discovery. Based on surface sampling, the system appears to daylight over an area measuring approximately 150 metres in diameter and remains open for expansion. The Main Breccia system is truly evolving into a brand-new world-class discovery right in the heart of a prolific mining camp with continuous precious metal production dating back more than 500 years.”

TORONTO, Jan. 31, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from a further three holes drilled into the Main Breccia discovery at the Apollo target (“Apollo”), which is part of the Guayabales project located in Caldas, Colombia. The Main Breccia discovery is a high-grade, bulk tonnage copper-silver-gold porphyry-related system, which owes its excellent metal endowment to multiple phases of mineralization which includes older copper-silver-gold porphyry mineralization and younger, overprinting, precious metal rich sheeted carbonate base metal vein systems.

Details (See Table 1 and Figures 1–6)

Assay results for twenty-eight diamond drill holes have now been announced at Apollo with results for additional holes expected in the near term. This press release announces results of three diamond drill holes with results summarized below.

APC-25 was drilled to the northwest from Pad 3 to a maximum depth of 215.80 metres and intersected a shallow, western extension to the Main Breccia discovery averaging:

  • 106.85 metres @ 2.31 g/t gold equivalent consisting of 0.81 g/t Au, 30 g/t Ag, 0.62% Cu and 30 ppm Mo beginning at 73 metres downhole (65 metres vertical).

The mineralized angular breccia of this intercept contains a sulphide matrix which includes 1.5% to 2.5% chalcopyrite and between 1% and 3% pyrite plus pyrrhotite. The breccia has been overprinted by a zone of carbonate and base metal (sphalerite and galena) veins, which host higher gold grades and returned an interval of 14 metres grading 3.65 g/t gold equivalent. APC-25 is the westernmost hole drilled into the Main Breccia discovery and demonstrates that the mineralization is open and is thickening in this direction. Drill holes have been designed to continue to step-out to the west to expand upon this high grade and near surface mineralization.

APC-26 was drilled northeast from pad 4 and confirms continuity within the Northern Extension Zone of the Main Breccia system, as previously defined in holes APC-17 and APC-22. The hole was drilled to a maximum downhole length of 813.7 metres and intercepted:

  • 311.2 metres @ 1.04 g/t gold equivalent consisting of 0.74 g/t Au, 16 g/t Ag, 0.05% Cu and 10 ppm Mo from 415 metres down hole.

Gold and silver mineralization relates to sulphides hosted within the angular breccia matrix including pyrite (1%-3%), pyrrhotite (1%-2%) and chalcopyrite (0.5%-1%). A higher-grade sub-zone was encountered within the mineralized intercept averaging 136.9 metres at 1.51 g/t gold equivalent and is characterized by an increase in overprinting low and intermediate sulphidation, carbonate base metal (“CBM”) vein material including visible sphalerite and galena.

APC-29 was drilled to the north-northeast from Pad 3 to a maximum depth of 644.8 metres and intercepted three mineralized zones before the hole was abandoned short of target depth due to a complicated fault structure. The two shallow zones within this hole are located directly beneath mineralized surface outcrops with the initial 32.0 metre intercept of mineralization beginning at 111.3 metres downhole (80 metres vertical), and the second 8.65 metre mineralized zone starting at 194.8 metres downhole (143 metres vertical). These high-grade gold, silver, and copper shallow zones of mineralization are hosted within a matrix of angular quartz diorite breccia with the sulphide component consisting of chalcopyrite (0.5%-2%), pyrite (0.5%-2%) and pyrrhotite (0.5-1%). Finally, the third zone, which starts at 343.8 metres downhole (318 metres vertical) intersected more 301 metres of continuous mineralization including a higher-grade subzone over 214.4 metres. The sulphide mineralization within the breccia matrix of this intercept contained pyrrhotite (0.5%-2.5%), pyrite (1%-3%) and multiple zones of sheeted CBM vein material, which are predominantly sphalerite rich with minor galena. The following intercepts are summarized from APC-29:

  • 32.00 metres @ 10.48 g/t gold equivalent consisting of 9.23 g/t Au, 60 g/t Ag, 0.44% Cu and 30 ppm Mo from 89.25 metres downhole (80 metres vertical depth).
  • 8.65 metres @ 2.26 g/t gold equivalent consisting of 0.57 g/t Au, 82 g/t Ag, 0.27% Cu and 10 ppm Mo from 194.80 metres downhole (143 metres vertical depth).
  • 214.40 metres @ 1.04 gold equivalent consisting of 0.77 g/t Au, 14 g/t Ag, 0.05% Cu and 10 ppm Mo from 343.80 metres downhole (318 metres vertical depth), which includes 98.20 metres @ 1.26 g/t gold equivalent.

The Company’s Phase II, 2023 program is well underway with two rigs focused on drilling near surface, high grade mineralization below mineralized outcrops in the southern and central areas of the Main Breccia system while simultaneously targeting expansion to the overall dimensions of the system to the west, northwest, north and northeast. Furthermore, a new drill pad (pad 8) has been constructed 150 south of the southernmost modelled boundary of the Main Breccia system at Apollo and reconnaissance drilling is underway to test a recently discovered porphyry target.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers a 1,000 metres X 1,200 metres area. The Apollo target area hosts the Company’s Main Breccia discovery and multiple additional untested breccia, porphyry and vein targets. The overall Apollo target area also remains open for further expansion.

Table 1: Apollo Target Assays Results for Holes APC-25, APC-26 and APC-29

HoleIDFrom
(m)
To
 (m)
Intercept
(m)
Au
(g/t)
Ag
(g/t)
Cu
%
Mo
%
AuEq(g/t) *CuEq(%) *
APC-2573.00179.85106.850.81300.620.0032.311.26
Incl.111.00125.0014.002.00350.750.0053.652.00
APC-26415.00726.20311.200.74160.050.0011.04
incl.415.00551.90136.901.14200.060.0011.51
APC-29111.30143.3032.009.23600.440.00310.48
and194.80203.458.650.57820.270.0012.26
and343.80644.80301.000.63140.050.0010.90
Incl.343.80558.20214.400.77140.050.0011.04
Incl.460.00558.2098.201.26150.040.0011.51
* AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.016 x 0.95) + (Cu (%) x 1.83 x 0.95)+ (Mo (%)*9.14 x 0.95) and CuEq (%) is calculated as follows:  (Cu (%) x 0.95) + (Au (g/t) x 0.51 x 0.95) + (Ag (g/t) x 0.01 x 0.95)+ (Mo(%)x 3.75 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Ag – $24/oz Mo US$20.00/lb and Au – US$1,500/oz and recovery rates of 95% for Au, Ag, Mo and Cu. Recovery rate assumptions are speculative as no metallurgical work has been completed to date.
** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.
Figure 1: Plan View of the Main Breccia System at Apollo Highlighting Drill Holes APC-25, APC-26 and APC-29 (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View of the Main Breccia System at Apollo Highlighting Drill Holes APC-25, APC-26 and APC-29 (CNW Group/Collective Mining Ltd.)
Figure 2: Up Close View of Drill Holes Intersecting the Shallow, High-Grade Southern Zone Within the Main Breccia System at Apollo (CNW Group/Collective Mining Ltd.)
Figure 2: Up Close View of Drill Holes Intersecting the Shallow, High-Grade Southern Zone Within the Main Breccia System at Apollo (CNW Group/Collective Mining Ltd.)
Figure 3: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 3: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 4: Core Photo Highlights from Drill Hole APC-25 (CNW Group/Collective Mining Ltd.)
Figure 4: Core Photo Highlights from Drill Hole APC-25 (CNW Group/Collective Mining Ltd.)
Figure 5: Core Photo Highlights from Drill Hole APC-26 (CNW Group/Collective Mining Ltd.)
Figure 5: Core Photo Highlights from Drill Hole APC-26 (CNW Group/Collective Mining Ltd.)
Figure 6: Core Photo Highlights from Drill Hole APC-29 (CNW Group/Collective Mining Ltd.)
Figure 6: Core Photo Highlights from Drill Hole APC-29 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Categories
Base Metals Collective Mining Energy Junior Mining Precious Metals
  • Three diamond drill rigs will be turning by the end of January with two of the rigs already coring and the third anticipated to start operating before the end of the month.
  • Two rigs will be focused on drilling the copper-silver-gold rich Main Breccia system at Apollo from two newly constructed drill pads (pad 6 and pad 7) with details as follows:
  • The third rig just began drilling at pad 8 (hole APC-32), which is located 150 metres south of the southernmost known boundary of the Main Breccia system. Holes drilled from this pad will focus on the newly generated porphyry target located directly below the high-grade coincidental copper and molybdenum soil anomalies within mineralized porphyry diorite hosting chalcopyrite veins (see press release dated December 14, 2022).
  • Assay results are expected in the near term for Apollo target drill holes APC-25 through APC-30 completed as part of the phase I program, which culminated in December 2022.

Ari Sussman, Executive Chairman commented: “We have an exciting and busy year ahead of us at the Guayabales project. We will remain aggressive with the drill bit in pushing the geological boundaries of the Apollo target as we look to remain on a steep trajectory of growth at the Main Breccia system while drilling untested surrounding targets to try and make a new and impactful discovery. Also, we will continue to leverage our various strategic alliances to design and implement new and innovative programs and platforms with our stakeholders as part of our “Collective” model, which is based on inclusiveness, transparency, and honesty. With such a remarkable geological and mineral endowment on the property and an excellent local management team in place, I believe the odds are in our favor to continue adding significant value for the Company and its shareholders in 2023.”

TORONTO, Jan. 17, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce the commencement of a phase II diamond drill program at the Main Breccia discovery at the Apollo target (“Apollo”), which is part of the Guayabales project located in Caldas, Colombia. The Main Breccia discovery is a high-grade, bulk tonnage copper-silver-gold porphyry-related system, which owes its excellent metal endowment to multiple phases of mineralization which includes older copper-silver-gold porphyry mineralization and younger, overprinting, precious metal rich sheeted carbonate base metal vein systems. The phase II program will begin with three diamond drill rigs with potential to increase the number of rigs as the program progresses.

Details (See Figures 1–2)

The Phase II program commenced with shallow drilling of near surface, high grade mineralization below mineralized breccia outcrops in the southern and central areas of the Main Breccia discovery from newly constructed drill pads, 6 and 7. The rig at pad 6 is currently drilling and entered the mineralized zone close to the drill hole collar.  The rig at pad 7 is expected to commence operations in the next 7-10 days. Furthermore, a new drill pad (pad 8) has been constructed 150 south of the southernmost modelled boundary of the Main Breccia system at Apollo to test the recently discovered porphyry target. Key highlights of the initial plan are as follows:

Main Breccia System

  • New drill holes APC-31 and APC-33 (pads 6 and 7 respectively) will focus on testing the shallow and high-grade mineralization located just below surface outcrops in the south and central portions of the deposit. This target area was drilled with APC-22 with recently announced results (see press release dated January 11, 2023) as follows:

Most of this outcropping and shallow target remains untested with current known dimensions from surface sampling cover a 150-metre diameter area. The target area remains open in all directions for expansion.

  • The program will also continue to undertake step-out drill holes designed to understand the geometry and size of the Apollo Main Breccia discovery, which remains open to the north, west, east and at depth. Recently announced step-out drill holes APC-17 and APC-22, both bottomed in mineralized breccia due to drill rig capacity returning 2.75 metres @ 0.86 g/t gold equivalent and 3 metres @ 0.48 g/t gold equivalent respectively in their final metres (see press release dated November 29, 2022, and January 11, 2023). Additionally, hole APC-28, intercepted 600 metres of continuous mineralization and ended while still in the system. Assays are outstanding for this hole and expected in the near term.
  • A final feature of the phase II diamond drill program at the Main Breccia system will be to test the following high grade mineralized subzones identified during the phase I program in 2022 as follows:

New Porphyry Target

  • Hole APC-32 will be drilled from a newly constructed pad 8, which is located 150 metres south of the southernmost modelled boundary of the Main Breccia system, to test below the coincidental high-grade copper and molybdenum soil anomalies associated with a mineralized porphyry diorite hosting chalcopyrite veins. The porphyry target covers an area measuring 250 metres by 150 metres and remains open for expansion in all directions. Recent, follow-up reconnaissance geological work at surface has identified a potassic altered porphyry diorite hosting quartz, molybdenum, and chalcopyrite veins. Surface rock chip sampling from limited weathered (leached) outcrop has returned grades of up to 0.28% copper and 0.13% molybdenum. The hole will be steeply inclined and drill directly below the highest soil and rock chip values.

In 2022, a total of 14,975 metres (31 holes) were drilled at the Apollo target for the phase I program. Assay results for twenty-five diamond drill holes have now been announced at Apollo with results for the remaining six holes expected in the near term.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers a 1,000 metres X 1,200 metres area. The Apollo target area hosts the Company’s Main Breccia discovery plus a vein system located above and on the eastern flank of the Main Breccia discovery. Multiple additional untested breccia, porphyry and vein targets have been generated with drilling to begin testing these targets in Q1, 2023. The overall Apollo target area also remains open for further expansion.

Figure 1: Plan View of the Main Breccia Discovery at Apollo Highlighting the Initial Holes for 2023 from new Drill Pads 6,7 and 8 (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View of the Main Breccia Discovery at Apollo Highlighting the Initial Holes for 2023 from new Drill Pads 6,7 and 8 (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver, and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Cision
Cision

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/January2023/17/c4130.html

Categories
Base Metals Breaking Collective Mining Exclusive Interviews Precious Metals

Collective Mining – Step Out Drilling Expands Apollo Target

Joining us for a conversation is Ari Sussman, the Executive Chairman to the Board for Collective Mining, which just released the latest round of step out drilling results from the High-Grade, Bulk Tonnage Apollo Target located on the flagship Guayabales Project.

COLLECTIVE MINING:
Listing:(TSX.V: CNL | OTCQX: CNLMF)
Website: https://www.collectivemining.com/
Press Release: https://www.collectivemining.com/news-media/news-releases/collective-mining-drills-426-metres-at-151-gt-gold-equivalent-in-step-out-as-well-as-4725-metres-at-545-gt-gold-equivalent-near-surface-at-its-bulk-tonnage-main-breccia-discovery-in-colombia
Corporate Presentation: https://www.collectivemining.com/investors/presentations/
Facebook: https://www.facebook.com/CollectiveMiningCol
Twitter: https://twitter.com/CollectiveMini1
LinkedIn: https://www.linkedin.com/company/collectivemining/?originalSubdomain=co
Instagram: https://www.instagram.com/collectivemining/
Youtube: https://www.youtube.com/channel/UC0J8zpCq0TNhJQePKdCrJag


The Best Video on Why and When to Buy and Sell Physical Precious Metals:

This image has an empty alt attribute; its file name is image-2-1024x263.png

WEEKLY SPECIAL: JAN 2023

This image has an empty alt attribute; its file name is valcambi_special_mf-1024x576.jpg
This image has an empty alt attribute; its file name is krugerrand_promo_mf-1024x576.jpg
https://www.milesfranklin.com/faq-maurice/
This image has an empty alt attribute; its file name is BitcoinSidebar.png.pagespeed.ce.6z1FEqVkO4.png

I’m a licensed broker for Miles Franklin Precious Metals InvestmentsThe Only Online Dealer that is Licensed and Bonded Period! Where we provide unlimited options to expand your precious metals portfolio, from:

Website| www.provenandprobable.com
Call me directly at 855.505.1900 or email: Maurice@MilesFranklin.com
Precious Metals FAQ – https://www.milesfranklin.com/faq-maurice/

Categories
Collective Mining Energy Junior Mining

Collective Mining Drills 426 Metres at 1.51 g/t Gold Equivalent in Step-Out as well as 47.25 Metres at 5.45 g/t Gold Equivalent Near Surface at its Bulk Tonnage Main Breccia Discovery in Colombia

  • Drilling results from two step out holes, APC-22 and APC-23, have expanded the copper-silver-gold footprint of the Main Breccia discovery at the Apollo target to the north and east.
  • Step-out drill hole APC-22, which expanded the system more than 100 metres to the north, intersected 426 metres @ 1.51 g/t gold equivalent.
  • Near the beginning of hole APC-22, two shallow zones of high-grade mineralization were encountered highlighted by 47.25 metres @ 5.45 g/t gold equivalent from 60 metres vertical.
  • APC-22 was terminated at 734 metres depth due to rig capacity and bottomed while still in mineralization averaging 3.3 metres @ 0.48 g/t gold.
  • Step-out drill hole APC-23, which intersected a mix of continuously mineralized angular breccia (higher grade) and flour breccia (lower grade), expanded the system to the east by intercepting 71.7 metres @ 1.01 g/t gold equivalent.
  • Assay results are still pending for holes 25 through 30 drilled into the Main Breccia system at the Apollo target with the 2023 program set to kickoff over the coming days.

Ari Sussman, Executive Chairman commented: “APC-22 is an important drill hole for the Company. Firstly, it significantly expanded the mineralized footprint of the system to the north-northeast and remains completely open for further expansion. Secondly, the near surface high-grade intercept in the hole, which was enriched by both porphyry style copper and gold and low sulphidation derived precious metals flooding the breccia matrix, opens up a new high-grade area for drilling. Drill hole APC-29, for which we do not yet have assay results and was drilled from the same pad, intersected similar style mineralization near surface at even greater intensity than APC-22. We believe that we have a “tiger by the tail” and that the system will continue to grow both in grade and scale with further drilling.”

TORONTO, Jan. 11, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from two step-out holes and one shallow hole drilled into the Main Breccia discovery at the Apollo target (“Apollo”), which is part of the Guayabales project located in Caldas, Colombia. The Main Breccia discovery is a high-grade, bulk tonnage copper-silver-gold porphyry-related system, which owes its excellent metal endowment to multiple phases of mineralization which includes older copper-silver-gold porphyry mineralization and younger, overprinting, precious metal rich sheeted carbonate base metal vein systems.

Details (See Table 1 and Figures 1–4)

Assay results for twenty-five diamond drill holes have now been announced at Apollo with results for a further six holes expected in the near term. This press release deals with results from two step out holes drilled to extend the deposit northwards and eastwards, and a shallow hole drilled on the western side of the deposit. Results and details of three drill holes are summarized below.

APC-22 is a step out hole drilled to the north-northeast from Pad 3 to a maximum depth of 734.8 metres and intercepted three mineralized zones. The two shallow zones are located directly beneath surface outcrops with the initial 47.25 metre intercept commencing at 89.25 metres downhole (60 metres vertical), and a second zone starting at 167 metres downhole with 16.80 metres of mineralization (100 metres vertical). Mineralization in these shallow zones is hosted within the matrix of angular quartz diorite breccia with sulphides consisting of chalcopyrite (1%-2.5%), pyrrhotite (1%) and pyrite (1%-1.5%). Finally, the third zone, which starts at 308.80 metres downhole (276 metres vertical) hit 424.10 metres of continuous mineralization until the end of the drillhole at 734.80 metres in length (650 metres vertical). This long and continuous zone of mineralization consists of chalcopyrite (0.5%) and pyrite (1%-2%) in the breccia matrix which is in turn overprinted by multiple zones of sheeted carbonate base metal (“CBM”) vein material, which are predominantly sphalerite rich with minor galena. The hole bottomed in mineralization due to the limitations of the drill rig with assay results as follows:

  • 47.25 metres @ 5.45 g/t gold equivalent consisting of 4.65 g/t Au, 22 g/t Ag, 0.39% Cu and 30 ppm Mo from 89.25 metres downhole (60 metres vertical depth).
  • 16.80 metres @ 4.56 g/t gold equivalent consisting of 2.59 g/t Au, 79 g/t Ag, 0.50% Cu and 20 ppm Mo from 167.0 metres downhole (100 metres vertical depth).
  • 426.0 metres @ 1.51 gold equivalent consisting of 1.05 g/t Au, 23 g/t Ag, 0.08% Cu and 10 ppm Mo from 308.80 metres downhole (276 metres vertical depth) and includes; 64.85 metres @ 3.67 g/t gold equivalent, 25.8 metres @ 2.59 g/t gold equivalent and 15.55 metres @ 2.04 g/t gold equivalent.

Hole APC-23 was drilled south from pad 5 to a maximum downhole length of 454.9 metres. This step- out hole aimed to test for an eastern extension to the Main Breccia system. The hole intercepted mineralization over 71.7 metres begining at 311.4 metres downhole. Mineralization in this eastern area occurs in both angular (higher grade) and fluid breccia (lower grade) morphologies and is associated with sulphide cement containing both pyrite and pyrrhotite with some overprinting CBM veins with assay results as follows:

  • 71.70 metres @ 1.01 g/t gold equivalent, including 17.3 metres grading 1.69 g/t gold equivalent.

Hole APC-24 was a shallow hole drilled south-southwest from Pad 4 to test for western extensions to the main breccia. The hole drilled to a maximum downhole length of 349.9 metres and only intersected mineralized crackle breccia from 101 metres (85 metres vertical depth). Gold and silver mineralization relates to matrix sulphides including pyrite (1%) and pyrrhotite (0.5%) with overprinting CBM veinlets containing sphalerite and some galena. The crackle breccia locates peripherally and above the Main Breccia system. Steeper drilling is thus required in this area to intersect the Main Breccia body. Nevertheless, mineralization was observed in the crackle breccia and returned the following results:

  • 50.60 metres @ 1.28 g/t gold equivalent from 101 metres downhole depth (85 metres vertical) including 10.15 metres @ 2.25 g/t gold equivalent.

In 2022, a total of 14,975 metres (31 holes) were drilled at the Apollo target. To date assay results have been released for 25 holes with results for the holes that remain outstanding expected in early 2023.

The Company’s 2023 drill program will begin in the coming days and will focus on targeting the high-grade subzones within the Main Breccia system while simultaneously expanding the potential size of the system. Additionally, the Company will remain aggressive in testing new targets at Apollo including the newly generated copper and molybdenum porphyry target located 150 metres south of the Main Breccia system.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers an 1,000 metres X 1,200 metres area. The Apollo target area hosts the Company’s Main Breccia discovery plus a vein system located above and on the eastern flank of the Main Breccia discovery. Multiple additional untested breccia, porphyry and vein targets have been generated with drilling to begin testing these targets in Q1, 2023. The overall Apollo target area also remains open for further expansion.

Table 1: Apollo Target Assays Results for Holes APC-22 to APC-24

HoleIDFrom
(m)
To
 (m)
Intercept
(m)
Au
(g/t)
Ag
(g/t)
Cu
%
Mo
%
AuEq
(g/t)*
APC-2289.25136.5047.254.65220.390.0035.45
167.00183.8016.802.59790.500.0024.56
and308.80734.80426.001.05230.080.0011.51
Incl406.15471.0064.853.16330.080.0013.67
568.10593.9025.802.23250.050.0012.59
665.85681.4015.551.59260.070.0012.04
APC-23311.35383.0571.700.86100.020.0011.01
359.1376.417.301.47140.040.0011.69
APC-24101.00151.6050.601.15100.020.0011.28
Incl110.05120.2010.152.1980.010.0032.25
128.75134.756.002.04110.020.0012.15
and316.25317.651.404.85260.080.0015.15
*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.016 x 0.95) + (Cu (%) x 1.83 x 0.95)+ (Mo (%)*9.14 x 0.95) and CuEq (%) is calculated as follows: (Cu (%) x 0.95) + (Au (g/t) x 0.51 x 0.95) + (Ag (g/t) x 0.01 x 0.95)+ (Mo(%)x 3.75 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Ag – $24/oz Mo US$20.00/lb and Au – US$1,500/oz and recovery rates of 95% for Au, Ag, Mo and Cu. Recovery rate assumptions are speculative as no metallurgical work has been completed to date.
** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.

Figure 1: Plan View of the Main Breccia Discovery at Apollo Highlighting Drill Holes APC-22 & APC-23 and Outstanding Holes Which May Expand the Main Breccia Mineralized Footprint

Figure 1: Plan View of the Main Breccia Discovery at Apollo Highlighting Drill Holes APC-22 & APC-23 and Outstanding Holes Which May Expand the Main Breccia Mineralized Footprint (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View of the Main Breccia Discovery at Apollo Highlighting Drill Holes APC-22 & APC-23 and Outstanding Holes Which May Expand the Main Breccia Mineralized Footprint (CNW Group/Collective Mining Ltd.)

Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target

Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)

Figure 3: Apollo Target: Main Breccia Cross Section with Core Photo Highlights from APC-22

Figure 3: Apollo Target: Main Breccia Cross Section with Core Photo Highlights from APC-22 (CNW Group/Collective Mining Ltd.)
Figure 3: Apollo Target: Main Breccia Cross Section with Core Photo Highlights from APC-22 (CNW Group/Collective Mining Ltd.)

Figure 4: Apollo Target: Core Photo Highlights from APC-23

Figure 4: Apollo Target: Core Photo Highlights from APC-23 (CNW Group/Collective Mining Ltd.)
Figure 4: Apollo Target: Core Photo Highlights from APC-23 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Information Contact

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Cision
Cision

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/January2023/11/c5199.html

Categories
Base Metals Collective Mining Energy Junior Mining

Step Out Drilling Expands Collective Mining’s Main Breccia Discovery at Apollo to The West and At Depth

  • Visual observations from two more step-out diamond drill holes, APC-25 and APC-28, within the Company’s Main Breccia discovery at the Apollo target (“Apollo”) have expanded the mineralized footprint of the system to the west and at depth. These holes are in addition to previously announced visual observations for step-out hole APC-22, which was drilled from Pad 3 to the northeast and cut more than 400 metres of continuous mineralization.
  • APC-28, which was drilled westwards from Pad 2, is the longest and deepest hole drilled to date into the Main Breccia discovery at Apollo. The hole intersected over 600 metres of continuous breccia mineralization which represents the longest continuously mineralized intercept drilled to date. Visual inspection of the mineralized intercept includes an upper copper rich zone followed by multiple zones enriched by sheeted carbonate base metal (“CBM”) vein overprinting. The hole terminated at approximately 956 metres while still in mineralization.
  • Hole APC-25, which was drilled to the northwest from Pad 3 and designed as a short step-out hole, cut more than 100 metres of favourable mineralization beginning at 65 metres below surface. Visual inspection of mineralization indicates that the intercept will be enriched in copper with 1.5% to 2.5% chalcopyrite being recorded in the logs. This is the westernmost hole drilled to date within the Main Breccia discovery at Apollo and opens the potential for further shallow mineralization expansion to the west.
  • Assay results for the remaining nine holes from the 2022 program are outstanding and expected in the near term.

Ari Sussman, Executive Chairman commented: To date, every time that we have undertaken step-out drilling at the Main Breccia system of Apollo, we have expanded the size of the discovery. The exceptional continuity encountered in drilling highlights the potential for a very large, bulk tonnage deposit with robust grades due to the copper-silver-gold mineralization within the breccia matrix being deposited from both a porphyry source as well as low and intermediate sulphidation vein systems. We will remain aggressive in 2023 with drilling set to resume in the coming days.”

TORONTO, Jan. 5, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce visual observations from two additional step-out holes drilled into the Main Breccia discovery at Apollo (“Apollo”), which is located within the Guayabales project in Caldas, Colombia. The Main Breccia discovery is a high-grade, bulk tonnage copper-silver-gold porphyry-related system, which owes its excellent metal endowment to multiple phases of mineralization which include older copper-silver-gold porphyry mineralization and younger, overprinting, sheeted carbonate base metal vein systems.

Details

Twenty-two diamond drill holes with accompanying assay results have now been announced at Apollo and a further nine holes await assay results in the near term. The Company recently completed two westerly directed step out diamond drill holes, APC-25 and APC-28, drilled from its southernmost drill pad (Pad 3) and from its easternmost drill pad (Pad 2). The holes were designed to test for western and depth extensions to the Main Breccia discovery. The following visual observations are highlighted from the two step out holes:

Hole APC-25 was drilled approximately northwest from Pad 3 to a maximum depth of 215.80 metres and was designed to test for potential westerly extensions to shallow and outcropping breccia mineralization. The hole intersected more than one hundred metres of continuous mineralization beginning at 73 metres down hole (65 metres vertical) and continued until approximately 180 metres downhole (160 metres vertical). The mineralized angular breccia contains a sulphide matrix which includes 1.5% to 2.5% chalcopyrite and between 1% and 3% pyrite plus pyrrhotite. The breccia has been overprinted by a zone of carbonate and base metal (sphalerite and galena) veins which based on previously announced results, host higher gold grades. APC-25 is the westernmost hole drilled into the main breccia discovery and opens the potential for further shallow mineralization in the west.

Hole APC-28 was drilled steeply to the west from Pad 2 to a maximum depth of 956.35 metres and was designed to test for western and depth extensions to the Main Breccia system. The hole intersected a hanging wall zone followed by the main zone of mineralized breccia material. The hanging wall zone was 19 metres thick beginning at 286 metres downhole and then the main zone of mineralization began at 354 metres downhole and continued to the end of the hole at 956.35 metres. The main zone of mineralized breccia hosts an upper portion where the sulphide matrix is rich in copper (chalcopyrite 0.7% to 1.5%), pyrite and pyrrhotite, and a lower portion where multiple zones of overprinting CBM veins were observed. APC-28 is the deepest and longest hole drilled to date and hosts the widest zone of continuous breccia mineralization intercepted to date. The hole was terminated while still in mineralization due to the limitations of the drill rig.

In 2022, a total of 14,975 metres (31 holes) were drilled at the Apollo target. To date assay results have been released for 22 holes with results for the holes that remain outstanding expected in early 2023.

The Company’s 2023 drill program will begin in the coming days and will focus on targeting the high-grade subzones within the Main Breccia system while simultaneously expanding the potential size of the system. Additionally, the Company will remain aggressive in testing new targets at Apollo including the newly generated copper and molybdenum porphyry target located 150 metres south of the Main Breccia system.

Figure 1: Plan View Outline of the Main Breccia Discovery at Apollo Highlighting Step-Out Drill Holes APC-25 and APC-28 (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View Outline of the Main Breccia Discovery at Apollo Highlighting Step-Out Drill Holes APC-25 and APC-28 (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 3: Selection of Core from Drill Hole APC-25 (CNW Group/Collective Mining Ltd.)
Figure 3: Selection of Core from Drill Hole APC-25 (CNW Group/Collective Mining Ltd.)
Figure 4: Selection of Core from Drill Hole APC-28 (CNW Group/Collective Mining Ltd.)
Figure 4: Selection of Core from Drill Hole APC-28 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Categories
Collective Mining Energy Junior Mining Precious Metals

Collective Mining Reviews 2022 Achievements & Provides Preliminary Plans for 2023

TORONTO, Dec. 28, 2022 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to provide an overview of its achievements in 2022 and a preliminary outline of its plans for 2023.

The Company enjoyed an outstanding year exploring in the field as well as building relationships and related sustainability efforts off the field with its employees and stakeholders. Importantly, buy-in by employees of the Company’s health and safety program has resulted in a record low Total Recordable Injury Frequency Rate (“TRIFR”) of 1.44 (Dec. 2021 – Nov. 2022) and as of December 19, 2022, the Company’s employees have gone 333 days without recording a safety incident.

Exploration efforts in 2022 were directed at the Company’s flagship Guayabales project (“Guayabales”) where a major grassroot discovery was drilled at the Apollo target along with two additional earlier stage drilling discoveries at the Olympus and Trap targets. Guayabales is located in an established mining camp with 10 fully permitted and operating mines located within a three-kilometre radius and enjoys excellent infrastructure with abundant labor in close proximity. Additionally, Guayabales is contiguous to the Aris Mining’s multi-million-ounce Marmato project, which was awarded its PTO by the national government of Colombia in November 2022.

2022 Highlights

Guayabales Project

  • Drilling: In 2022, the Company drilled a total of 22,907 metres on schedule and on budget, of which 14,975 metres (30 holes) were drilled at the Apollo target.
  • Discovery 1: Apollo Target Main Breccia Discovery: The Company announced a significant grassroots discovery of a new bulk tonnage and high-grade, copper-silver-gold porphyry-related breccia system named the Main Breccia. The discovery hole for the Main Breccia system was announced on June 22, 2022, and since that time a total of 21 holes have been announced with an additional 9 holes awaiting assay results in the near term. From only a limited number of holes, the maximum known dimensions of the volume of rock, within which the Main Breccia system is hosted, measures 385 metres along strike by 350 metres across by 825 metres vertical. The system remains open for expansion in all directions. Apollo owes its excellent metal endowment to multiple phases of mineralization which include earlier gold-silver-copper breccia matrix mineralization derived from a porphyry source and younger, overprinting, sheeted carbonate base metal vein systems. Highlight assay results for drill holes into the Main Breccia system include:

Table 1: Select Assay Results of Holes Drilled into the Main Breccia Discovery at Apollo

Hole #From
(m)
To (m)Intercept
(m)
Au
(g/t)
Ag
(g/t)
Cu%Zn %Pb%Mo %AuEq
(g/t)*
CuEq
(%)*
APC-2154.75361.90207.151.46450.310.0750.050.0022.681.37
Incl192.50209.9017.406.57440.080.2850.230.0037.33
270.65291.6020.953.67680.410.0340.030.0025.21
APC-8202.00467.75265.751.26550.220.070.050.0452.441.24
Incl202.00215.2013.203.68270.030.320.240.2384.29
239.05257.5018.453.48530.120.240.220.2164.55
279.40307.8528.453.70240.160.030.020.0164.18
342.60358.1015.502.151580.470.130.100.1045.21
APC-12191.35429.05237.71.15720.380.080.070.0012.881.47
Incl209.70224.0014.304.01770.210.270.260.0015.58
339.55361.3021.753.842100.680.370.450.0018.27
416.90429.0512.153.64840.220.040.060.0015.09
APC-1484.25131.7047.450.81130.200.010.000.0031.360.7
197.00391.30194.300.39560.440.030.010.0022.001.02
APC-18136.05304.65168.600.98690.500.040.030.0022.911.48
Incl149.20157.007.805.08350.520.020.0026.343.23
193.20205.1011.902.181540.770.180.200.0015.812.97
233.90251.5017.601.49560.740.050.020.0023.631.85
291.65297.005.353.26100.110.010.0013.471.77
APC-19199.20497.80298.60.48340.310.040.020.0021.540.79
Incl199.20323.50124.300.62640.630.050.020.0022.721.39
491.30497.806.502.33260.040.080.060.0012.69
APC-20298.20400.40102.202.72280.080.210.150.0013.38
Incl324.25357.8533.606.30450.080.420.330.0017.30
Figure 1: Plan View of the Main Breccia Discovery at Apollo (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View of the Main Breccia Discovery at Apollo (CNW Group/Collective Mining Ltd.)
  • Apollo Target: New Undrilled Porphyry Target: On December 14, 2022, the Company announced the discovery of a significant high-grade copper and molybdenum soil anomaly located only 150 metres south of the southernmost edge of the Main Breccia discovery. Drilling is planned for early 2023 to test the target, which could be the source of the porphyry copper mineralization found in the Main Breccia system.  
  • Apollo Target: Metallurgy: The Company successfully completed cyanide leach, bottle-roll test on three representative composite sulphide samples from the Main Breccia discovery. Importantly, the samples covered all major styles of mineralization hosted within the Main Breccia discovery and yielded excellent recovery rates for gold up to 97%.
  • Discovery #2: Olympus: The Company made its second grassroots discovery on March 25, 2022, at the Olympus target. The discovery is characterized by broad drilling intercepts of medium grade gold and silver with minor associated base metal credits. The Olympus discovery covers an area measuring 1.0 km by 0.9 km and remains open in most directions. A three-hole, phase II program was recently completed with assay results expected in Q1, 2023.  Highlight Phase I assay results for drill holes at Olympus include:

Table 2: Select Assay Results from Drilling at the Olympus Target

Hole #From (m)To (m)Intercept
(m)
Au (g/t)Ag (g/t)Cu%Zn %Pb%Mo %AuEq (g/t)*
OLCC-361.70363.60301.900.8911.820.030.030.030.0021.11
OLCC-473.00289.70216.700.7913.840.040.020.030.0041.08
  • Discovery #3: Trap: The Company announced its third grassroots discovery at the Trap target on September 27, 2022. Trap is a north to northwest trending, structurally controlled corridor with evidence of overprinting porphyry B veins and late-stage carbonate base metals veins. Highlights from the reconnaissance drill program at Trap include:

Table 3: Select Assay Results from Drilling at the Trap Target

Hole #From
(m)
To (m)Intercept
(m)
Au
(g/t)
Ag
(g/t)
Cu%Zn %Pb%Mo %AuEq
(g/t)*
CuEq
(%)*
TRC-1233.8336.0102.201.26120.090.080.010.0031.530.90
VICE-2214.6233.5018.901.06360.180.180.120.0051.831.13

Corporate & Sustainability, Strategic Alliances

  • Financing: In October, the Company closed a $10.7 million bought deal financing comprised of 4,783,400 units at $2.25 per unit, including one half of one common share purchase warrant at $3.25, excisable until April 25, 2024.
  • OTC Listing: The Company upgraded its US-based listing to the OTCQX exchange from the Pink® market, trading under the symbol CNLMF. 
  • Strategic Alliances:

2023 Preliminary Plans

  • Equipped with a strong balance sheet, the Company will continue to actively drill the Apollo target. The program will focus on targeting the high-grade subzones within the Main Breccia system while simultaneously expanding the size of the system. Additionally, the Company will remain aggressive in testing new targets including the newly generated copper and molybdenum porphyry target located 150 metres south of the Main Breccia system. Drilling will resume in early January 2023.       
  • Assays for the remaining and completed 2022 drill holes at Apollo remain outstanding and will be announced throughout early 2023.

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

Cision
Cision

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/December2022/28/c9404.html