Vancouver, British Columbia–(Newsfile Corp. – November 30, 2022) – Provenance Gold Corp. (CSE: PAU) (OTCQB: PVGDF) (the “Company” or “Provenance“) is pleased to announce it has recently completed rock chip sampling and other field work at its Eldorado property in Eastern Oregon. Sampling focused on areas that had exposures of available rock for sampling in areas of significant soil cover. In addition, the Company is also in the process of reviewing, compiling and evaluating all previous historic sampling programs at Eldorado including soil sampling, rock chip sampling, trench sampling and drill hole sampling.
The Eldorado area has been the focus of considerable historic placer mining and modern era exploration by at least five mining companies. All this activity is extensive, and evidence of both placer mining and drilling / trenching remains in every corner of the property. The attached Figure below shows a seamed 1998 aerial photograph over recent satellite imagery which validates the considerable work that has been done to date on the property.
Figure 1 – Shows a Seamed 1998 Aerial Photograph Over Recent Satellite Imagery
The Company’s current field work has focused on collecting 38 rock outcrop samples to assess gold and silver values over a broad area to both confirm anomalies previously identified by past operators and to give the Company its own data base of surface sampling results. The new sampling along with integration of historic rock chip assays, trenching assays and soil auger assays should help define the full potential of the project. This work should better define the project’s footprint and will provide valuable guidance in planning future drill programs once fully permitted.
The Company has in its possession, a large amount of historic assay information that was obtained from several of the past operators, which includes rock chip samples, 43 trenches and 1,081 auger soil samples. These samples, along with results from our current sampling and “top of bedrock” assay samples from the drill holes, will provide a significant gold anomaly map to be used for future drilling.
Cross-section studies of the historic drill holes have identified areas within the historically identified gold system that were missed by the historic drilling. Confirmation drilling of these areas could add mineralized tonnage to the overall gold inventory. Some of the outcrop sampling is focusing on these untested areas.
Additionally, rock outcrops are not abundant on the property, which is mostly covered by soil. The outcrops that have been sampled are all strongly altered. Provenance believes these exposures may represent extensions of the mineral system and sampling these outcrops should verify that interpretation.
The Company expects assay results from this program in the coming weeks and completion of the full assay compilation will be released to the public as it becomes available.
Rauno Perttu, Provenance Chairman said, “I look forward to drilling to confirm the historic work, and also to begin to expand the size and likely the grade of the system. With in-fill drilling and deeper drilling, I believe we can significantly increase the magnitude of the system.”
“Eldorado already holds a significant historical inventory of gold as calculated by a reputable engineering firm in 1990,” stated Steve Craig, project manager. “We believe we will be ready to drill with target confidence in 2023 following our extensive compilation and evaluation of all of the historic data that the Company has in its possession.”
Qualified Person
Steven Craig, CPG, an independent consultant and qualified person as defined under National Instrument 43-101, has reviewed and approved the technical contents of this news release.
About Provenance Gold Corp.
Provenance Gold Corp. is a precious metals exploration company with a focus on gold and silver mineralization within North America. The Company currently holds interests in three properties, two in Nevada, and one in eastern Oregon, USA. For further information please visit the Company’s website at https://provenancegold.com or contact Rob Clark at rclark@provenancegold.com.
On behalf of the Board, Provenance Gold Corp. Rauno Perttu, Chief Executive Officer
Neither the Canadian Securities Exchange, nor its regulation services provider, accepts responsibility for the adequacy or accuracy of this press release. This news release may contain certain “Forward-Looking Statements” within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When or if used in this news release, the words “anticipate”, “believe”, “estimate”, “expect”, “target, “plan”, “forecast”, “may”, “schedule” and similar words or expressions identify forward-looking statements or information. Such statements represent the Company’s current views with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by the Company, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Many factors, both known and unknown, could cause results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements or information to reflect changes in assumptions or changes in circumstances or any other events affecting such statements and information other than as required by applicable laws, rules and regulations.
Vancouver, British Columbia–(Newsfile Corp. – November 29, 2022) – Dolly Varden Silver Corporation (TSXV: DV) (OTCQX: DOLLF) (the “Company” or “Dolly Varden“) is pleased to announce drill results from the 100%-owned Homestake Ridge property in BC’s Golden Triangle. The objective of drilling during 2022 at the Homestake Main and Homestake Silver deposits was to expanded multiple, subparallel mineralized zones and to upgrade Inferred Resources.
Highlights include (intervals shown are core length):
HR22-314: 4.27 g/t Au and 64 g/t Ag (5.10 g/t AuEq*) over 16.06 meters including 18.76 g/t Au and 193 g/t Ag (21.49 g/t AuEq*) over 3.08 meters
HR22-322: 6.47 g/t Au and 27 g/t Ag (5.83 g/t AuEq*) over 6.00 meters
HR22-325: 7.18g/t Au and 30 g/t Ag, 0.49% Cu (8.26 g/t AuEq*) over 10.00 meters including 20.20 g/t Au and 68 g/t Ag (21.13 g/t AuEq*) over 1.47 meters
HR22-328: 27.44 g/t Au and 463 g/t Ag (33.34 g/t AuEq*) over 9.16 meters including 0.50 meters 216.00 g/t Au and 113 g/t Ag, 0.48% Cu (218.06 AuEq*) over 0.50 meters
HR22-330: 5.68 g/t Au and 147 g/t Ag (7.48 g/t AuEq*) over 15.00 meters, including 54.10 g/t Au, 4,890 g/t Ag and 0.11% Cu (113.25 g/t AuEq*) over 0.39 meters
HR22-337: 3.79 g/t Au and 2 g/t Ag (3.84 g/t AuEq*) over 21.00 meters including 11.15 g/t Au and 5.00 g/t Ag (11.22 AuEq*) over 2.00 meters
HR22-339: 14.56 g/t Au and 4.00 g/t Ag (14.63 g/t AuEq*) over 2.50 meters
“Our 2022 drill program has truly been exceptional. The recently acquired Homestake Ridge Deposit has delivered more high-grade gold and silver values, commonly with strong copper mineralization. These intercepts demonstrate strong continuity of mineralization over wide intervals, similar to the recently announced high-grade results at the Wolf and Kitsol Deposits, located six kilometers to the south. We eagerly anticipate additional assays from all of Dolly Varden’s Deposits, as well as new exploration targets drilled during the 2022 program,” said Shawn Khunkhun, President and CEO.
These results are primarily infill drilling from areas of Current Inferred Mineral Resources and suggest that the higher-grade gold-silver lenses may be continuous over more extensive areas than previously interpreted. In addition, the drilling has generated new targets down-dip the Homestake Main deposit along the projected plunge of the higher grade shoots that are wide open for expansion. Oriented core was used on all drill holes on the project and this detailed structural data is also being integrated in to the geological model to further increase confidence. Additional assays from the Homestake Main and Silver Deposits are pending
Complete Assay results for the first batch of drilling results at Homestake Main are in Table 1.
Figure 1. Location along Dolly Varden’s Kitsault Valley trend of Deposits
The Homestake Ridge deposits are interpreted as structurally-controlled, multi-phase epithermal vein and breccia system hosted in Jurassic aged Hazelton Volcanic rocks. Mineralization consists of pyrite and chalcopyrite in a breccia matrix within a silica breccia vein system (see Figure 2). The northwest orientation of the main Homestake structural trend appears to have numerous subparallel internal structures that are interpreted to form the controls for higher grade gold shoots within a broader low grade zone at the Homestake Main deposit. The main structural corridor dips steeply to the northeast (see Figure 3 and 4).
Figure 2. Drill hole HR22-330 from the Homestake Main deposit showing breccia vein style mineralization.
Table 1. Completed Drill Hole Assays from the Homestake Main Deposit
Hole ID
From (m)
To (m)
Length (m)
Au (g/t)
Ag (g/t)
Cu (%)
AuEq*
AgEq*
HR22-313
107.00
148.00
41.00
0.85
12
0.10
1.13
93
including
125.08
127.00
1.92
3.13
42
NSV
3.64
300
including
141.00
146.10
5.10
3.10
11
0.72
4.28
353
HR22-314
149.66
165.72
16.06
4.27
64
NSV
5.10
421
including
159.92
163.00
3.08
18.76
193
0.28
21.49
1,773
and
168.23
169.19
0.96
10.55
50
4.14
17.17
1,417
HR22-315
174.70
175.22
0.52
2.07
25
1.37
4.36
360
HR22-316
124.00
152.50
28.50
0.88
3
NSV
0.97
80
including
142.50
144.00
1.50
2.47
3
NSV
2.58
213
including
150.00
151.50
1.50
3.11
13
0.49
3.97
328
HR22-317
200.00
205.00
5.00
0.25
NSV
NSV
0.03
21
and
232.00
235.60
3.60
0.21
NSV
NSV
0.21
17
HR22-318
129.00
181.00
52.00
1.19
23
NSV
1.54
127
including
148.88
149.38
0.50
19.90
1990
0.39
44.47
3,669
including
152.00
160.20
8.20
2.57
8
0.19
2.95
243
including
172.00
177.00
5.00
3.23
3
0.09
3.39
280
HR22-319
200.34
207.00
6.66
1.16
3
NSV
1.26
104
HR22-320
108.50
125.50
17.00
0.83
6
NSV
0.91
75
including
123.87
124.60
0.73
5.98
17
NSV
6.21
512
HR22-321
179.00
192.00
13.00
1.16
4
0.12
1.38
114
including
189.00
190.55
1.55
5.18
10
0.15
5.52
455
HR22-322
83.00
143.12
60.12
1.69
21
NSV
2.01
166
including
113.00
119.00
6.00
6.47
27
NSV
6.83
563
including
134.13
138.71
4.58
5.23
17
0.50
6.15
508
HR22-323
190.30
222.00
31.70
0.91
6
0.37
1.52
125
including
198.00
203.00
5.00
2.36
5
0.08
2.53
208
including
207.60
209.56
1.96
0.49
37
3.50
6.03
497
including
214.00
214.55
0.55
0.52
16
1.97
3.57
295
HR22-325
174.00
201.00
27.00
3.11
12
0.20
3.54
292
including
174.00
184.00
10.00
7.18
30
0.49
8.26
681
including
175.00
175.50
0.50
18.00
23
1.92
21.06
1,738
including
177.30
177.80
0.50
15.60
92
2.95
21.00
1,733
including
180.00
181.47
1.47
20.20
68
0.08
21.13
1,743
HR22-327
217.28
227.50
10.22
1.01
17
1.43
3.29
271
including
220.75
223.23
2.48
2.15
35
3.98
8.36
689
and
231.00
274.00
43.00
0.35
5
0.10
0.56
46
including
248.55
251.48
2.93
1.85
65
1.13
4.28
353
Table 1 con’t. Completed Drill Hole Assays from the Homestake Main Deposit
Hole ID
From (m)
To (m)
Length (m)
Au (g/t)
Ag (g/t)
Cu (%)
AuEq*
AgEq*
HR22-328
160.81
169.97
9.16
27.44
463
0.21
33.34
2,751
including
163.13
164.90
1.77
75.13
2337
0.23
103.66
8,552
including
168.00
168.50
0.50
216.00
113
0.48
218.06
17,991
HR22-330
111.00
126.00
15.00
5.68
147
NSV
7.48
617
including
112.00
112.39
0.39
54.10
4890
0.11
113.25
9,344
including
116.30
116.69
0.39
74.80
20
NSV
75.05
6,192
including
118.00
118.81
0.81
33.80
14
NSV
33.98
2,803
and
131.00
143.00
12.00
0.24
8
NSV
0.38
31
HR22-331
101.00
113.00
12.00
0.92
63
NSV
1.70
140
including
111.00
111.80
0.80
9.43
224
0.10
12.27
1,013
and
130.00
144.00
14.00
1.02
5
0.15
1.30
107
including
134.10
134.82
0.72
11.95
70
2.45
16.36
1,349
HR22-334
123.00
154.61
31.61
1.75
15
0.27
2.32
191
including
131.00
139.20
8.20
3.66
30
0.27
4.42
364
including
131.00
132.00
1.00
7.67
198
0.04
10.11
834
including
138.70
139.20
0.50
19.55
50
4.26
26.35
2,174
including
145.13
147.39
2.26
5.38
19
1.09
7.19
593
including
152.06
152.41
0.35
6.92
48
7.27
18.07
1,491
HR22-335
177.00
202.55
25.55
0.55
1
NSV
0.57
47
including
184.50
190.00
5.50
1.40
1
NSV
1.42
117
and
220.00
245.50
25.50
0.34
2
NSV
0.43
35
HR22-337
145.00
175.84
30.84
2.74
2
NSV
2.79
230
including
151.00
172.00
21.00
3.79
2
NSV
3.84
317
including
151.00
152.64
1.64
12.90
4
NSV
12.95
1,069
including
161.00
163.00
2.00
11.15
5
NSV
11.22
926
including
171.00
172.00
1.00
6.58
3
NSV
6.65
548
HR22-339
148.25
172.50
24.25
2.33
2
NSV
2.37
195
including
156.50
159.00
2.50
14.56
4
NSV
14.63
1,207
including
156.50
157.50
1.00
33.40
7
NSV
33.52
2,765
and
164.75
165.60
0.85
5.05
3
NSV
5.11
422
*AuEq and AgEq are calculated using $US1650/oz Au, $US20/oz Ag, $US3.50/lb Cu
**Estimated true widths vary depending on intersection angles and range from 80% to 90% of core lengths
Table 2. Drill Hole Collars for 2022 Homestake Main Deposit Drilling
Hole ID
Easting UTM83 (m)
Northing UTM83 (m)
Elev. (m)
Azimuth
Dip
Length (m)
HR22-313
463002
6179472
954
225
-47
201.00
HR22-314
463050
6179452
956
226
-50
180.00
HR22-315
463050
6179452
956
226
-59
228.00
HR22-316
463002
6179472
954
225
-57
201.00
HR22-318
463002
6179472
954
245
-50
207.00
HR22-317
463050
6179452
956
226
-68
237.00
HR22-319
463050
6179452
956
250
-68
237.00
HR22-320
462956
6179462
956
225
-45
165.00
HR22-321
463113
6179429
953
229
-53
210.00
HR22-322
462956
6179462
956
225
-60
180.00
HR22-323
463113
6179429
953
229
-62
231.00
HR22-325
463132
6179416
949
228
-51
220.00
HR22-327
463132
6179416
949
228
-70
276.00
HR22-328
463052
6179417
973
225
-68
255.00
HR22-330
463052
6179417
973
225
-59
220.00
HR22-331
463052
6179417
973
220
-50
216.00
HR22-334
463089
6179383
982
230
-58
250.00
HR22-335
462965
6179544
922
250
-54
252.00
HR22-337
462937
6179513
935
225
-50
192.00
HR22-339
462937
6179513
935
215
-65
210.00
Quality Assurance and Quality Control
The Company adheres to CIM Best Practices Guidelines for exploration related activities conducted on its property. Quality Assurance and Quality Control (QA/QC) procedures are overseen by the Qualified Person.
Dolly Varden QA/QC protocols are maintained through the insertion of certified reference material (standards), blanks and field duplicates within the sample stream. Drill core is cut in-half with a diamond saw, with one-half placed in sealed bags and shipped to the laboratory and the other half retained on site. Third party laboratory checks on 5% of the samples are carried out as well. Chain of custody is maintained from the drill to the submittal into the laboratory preparation facility.
Analytical testing was performed by ALS Canada Ltd. in North Vancouver, British Columbia. The entire sample is crushed to 70% minus 2mm (10 mesh), of which a 500 gram split is pulverized to minus 200 mesh. Multi-element analyses were determined by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for 48 elements following a 4-acid digestion process. High grade silver testing was determined by Fire Assay with either an atomic absorption, or a gravimetric finish, depending on grade range. Au is determined by Fire Assay on a 30g split.
Qualified Person
Rob van Egmond, P.Geo., Vice-President Exploration for Dolly Varden Silver, the “Qualified Person” as defined by NI43-101 has reviewed, validated and approved the scientific and technical information contained in this news release and supervises the ongoing exploration program at the Dolly Varden Project.
About Dolly Varden Silver Corporation
Dolly Varden Silver Corporation is a mineral exploration company focused on advancing its 100% held Kitsault Valley Project (which combines the Dolly Varden Project and the Homestake Ridge Project) located in the Golden Triangle of British Columbia, Canada, 25kms by road to tide water. The 163 sq. km. project hosts the high-grade silver and gold resources of Dolly Varden and Homestake Ridge along with the past producing Dolly Varden and Torbrit silver mines. It is considered to be prospective for hosting further precious metal deposits, being on the same structural and stratigraphic belts that host numerous other, on-trend, high-grade deposits, such as Eskay Creek and Brucejack. The Kitsault Valley Project also contains the Big Bulk property which is prospective for porphyry and skarn style copper and gold mineralization, similar to other such deposits in the region (Red Mountain, KSM, Red Chris).
Forward Looking Statements
This release may contain forward-looking statements or forward-looking information under applicable Canadian securities legislation that may not be based on historical fact, including, without limitation, statements containing the words “believe”, “may”, “plan”, “will”, “estimate”, “continue”, “anticipate”, “intend”, “expect”, “potential”, and similar expressions. Forward-looking statements involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance, or achievements of Dolly Varden to be materially different from any future results, performance, or achievements expressed or implied by the forward-looking statements. Forward looking statements or information in this release relates to, among other things, the 2022 drill program at the Kitsault Valley Project, the results of previous field work and programs and the continued operations of the current exploration program, interpretation of the nature of the mineralization at the project and that that the mineralization on the project is similar to Eskay and Brucejack, results of the mineral resource estimate on the project, the potential to grow the project, the potential to expand the mineralization and our beliefs about the unexplored portion of the property.
These forward-looking statements are based on management’s current expectations and beliefs and assume, among other things, the ability of the Company to successfully pursue its current development plans, that future sources of funding will be available to the company, that relevant commodity prices will remain at levels that are economically viable for the Company and that the Company will receive relevant permits in a timely manner in order to enable its operations, but given the uncertainties, assumptions and risks, readers are cautioned not to place undue reliance on such forward-looking statements or information. The Company disclaims any obligation to update, or to publicly announce, any such statements, events or developments except as required by law.
For additional information on risks and uncertainties, see the Company’s most recently filed annual management discussion & analysis (“MD&A“) and management information circular dated January 21, 2022 (the “Circular“), both of which are available on SEDAR at www.sedar.com. The risk factors identified in the MD&A and the Circular are not intended to represent a complete list of factors that could affect the Company.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX-V) accepts responsibility for the adequacy or accuracy of this news release.
Drill hole APC-17, a significant step-out hole to the north, intersected two zones of mineralization within the Main Breccia discovery at the Apollo target. The shallow zone, which was intersected directly below where the Main Breccia daylights at surface cut the following interval:
The second zone encountered in hole APC-17 cut the longest intercept of continuous mineralization within the Main Breccia discovery drilled to date with results as follows:
Drill hole APC-17, which was terminated at 912.8 metres due to rig capacity, bottomed in strong mineralization with the final 2.75 metres averaged 1.56 g/t gold, 9 g/t silver and 0.03% copper.
Drill hole APC-18 intersected near surface and high-grade copper-silver-gold mineralization approximately 300 metres to the north of the near surface intercept in APC-17. The mineralized breccia in this zone is strongly overprinted by numerous zones of carbonate, base metal veins with assay results as follows:
With the result of step out hole APC-17 and recently announced visuals from step out hole APC-22, the Main Breccia discovery now measures up to 385 metres along strike by 350 metres in width (previously 190 metres) and has been extended down to a vertical depth of 825 metres below surface (previously 500 metres). The discovery remains wide open for expansion and further step-out holes are currently being designed.
Three rigs continue to drill at Apollo with holes APC-19 through APC-26 completed and holes APC-27 through APC-29 underway. Additional assay results are anticipated in the near term.
TORONTO, Nov. 29, 2022 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from four additional holes drilled at the Apollo target (“Apollo”) within the Company’s Guayabales project located in Caldas, Colombia. The Main Breccia discovery at Apollo is a high-grade, bulk tonnage copper-gold-silver porphyry-related breccia target. As part of its fully funded 23,000 metre drill program for 2022, there are currently three diamond drill rigs operating at the Apollo target.
“The intersection of high-grade and shallow mineralization at Apollo demonstrates the excellent metal endowment of the Main Breccia and most importantly, the dimensions of the system continue to expand and clearly point to the fact that we are dealing with a large-scale discovery. It is truly remarkable to drill a 912-metre-long hole that bottoms in mineralization. Finally, the shallow, higher grade intercepts encountered in APC-17 and APC-18 are more than 300 metres apart and confirms that the southern portion of the deposit is where the system comes to surface. As a result, we are about to start construction of a new drill pad located between the two shallow intercepts in order to start defining the shallow portion of the Main Breccia mineralized system,” commented Ari Sussman, Executive Chairman.
Details (See Table 1 and Figures 1–3)
Nineteen diamond drill holes with accompanying assay results have now been announced at Apollo and a further eleven holes are outstanding. The Company recently completed four drill holes; one northerly directed, step out hole (APC-17), to test for mineralized extensions to the Main Breccia discovery, a second shallow hole drilled southwesterly to define extensions of newly discovered mineralized breccia outcrops located in the southern portion of the deposit and two fringe holes drilled at shallow angles to the west of the Main Breccia discovery.
Drill hole APC-17 was drilled approximately due north to a maximum depth of 912.60 metres. The hole intersected three mineralized zones: 72.3 metres of mineralization beginning at 118.20 metres down hole (100m vertical), 11.65 metres of mineralized breccia from 252.6 metres (220m vertical) and another 547.65 metres of mineralization from 365.15 metres down hole (330m vertical) to the end of the hole at 912.80m (825m vertical). The hole terminated while still in mineralized breccia due to limitations of the drill rig. Total cumulative mineralization in this diamond drill hole was 628.3 metres and is the most mineralization drilled in a single hole to date into the Main Breccia discovery at Apollo. The shallow intercept is hosted within angular porphyry related breccia containing chalcopyrite (1-2%) with pyrite and pyrrhotite and is located directly beneath recently discovered mineralization outcropping at surface. The deeper and longer intercept is also hosted within angular porphyry related breccia with the matrix filled with pyrite, some chalcopyrite and overprinting carbonate base metal veins (“CBM”). The following results are highlighted:
11.65 metres @ 1.88 g/t gold equivalent consisting of 1.80 g/t gold, 4 g/t silver and 0.05% copper (220m vertical).
547.65 metres @ 1.03 g/t gold equivalent consisting of 0.76 g/t gold, 14 g/t silver and 0.04% copper (330m vertical).
Drill hole APC-18 was drilled in a southwest direction and intersected shallow, copper-silver-gold mineralization from 136.05 metres to 304.65 metres with the hole terminating at a final depth of 499.05 metres. The mineralized breccia contains a matrix of chalcopyrite and pyrite is strongly overprinted by numerous zones of CBM veins hosting sphalerite and galena. The hole was drilled below outcrops of breccia mineralization in the south-central portion of the deposit with assay results as follows:
With the result of APC-17 and recently announced visuals from APC-22, the potential total volume of rock hosting the Main Breccia discovery within it has approximately tripled in size with the dimensions now measuring 385 metres along strike by 350 metres width by 825 metres depth versus prior dimensions of 385 metres x 190 metres x 500 metres. The discovery remains wide open for expansion and further step-out holes are currently being designed.
Holes APC-15 and APC-16 were drilled at shallow angles on the western periphery of the main breccia body. APC-15 was drilled to the northwest and intersected mineralized crackle breccia returning 56.05 metres @ 0.57 g/t gold equivalent from 68.6 metres (55 metres vertical). This is a new mineralized area outside of the Main Breccia discovery at Apollo. APC-16 was also drilled outside the Main Breccia discovery to the southwest and intersected 500 parts per million copper in crackle breccia from 200 metres and until the end of the hole at 303.35 metres. The Company believes that both APC-15 and APC-16 may have drilled over the top of the Main Breccia discovery in these locations.
Three rigs continue to drill at Apollo with additional assay results anticipated in the near term.
The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers an 800 metres X 700 metres area. The Apollo target area hosts the Company’s new Main Breccia discovery plus a vein system located above and on the eastern flank of the Main Breccia discovery and the Northern Breccia discovery located 250 metres to the north of the Main Breccia. Multiple additional untested breccia, porphyry and vein targets have been generated and will be drilled in due course. The overall Apollo target area also remains open for further expansion.
Table 1: Apollo Target Assays Results
HoleID
From (m)
To (m)
Intercept (m)
Au (g/t)
Ag (g/t)
Cu %
Mo %
AuEq (g/t)*
CuEq (%)*
APC-18
136.05
304.65
168.60
0.98
69
0.50
0.002
2.91
1.48
Incl
149.20
157.00
7.80
5.08
35
0.52
0.002
6.34
3.23
193.20
205.10
11.90
2.18
154
0.77
0.001
5.81
2.97
233.90
251.50
17.60
1.49
56
0.74
0.002
3.63
1.85
291.65
297.00
5.35
3.26
10
0.11
0.001
3.47
1.77
APC-17
118.20
190.50
72.30
1.00
28
0.63
0.004
2.57
1.31
Incl
121.90
130.40
8.50
2.42
30
0.61
0.005
3.91
2.00
APC-17
252.60
264.25
11.65
1.80
4
0.05
0.002
1.88
–
and
365.15
912.80
547.65
0.76
14
0.04
0.001
1.03
–
Incl
527.80
561.10
33.30
3.01
19
0.05
0.002
3.23
–
579.20
596.80
17.60
2.37
25
0.06
0.001
2.74
–
816.00
837.50
21.50
1.53
28
0.09
0.001
2.04
–
APC-16
NSV*
APC-15
54.20
110.25
56.05
0.37
5
–
–
0.57
–
Incl
68.60
69.10
0.50
6.26
15
–
–
6.27
–
77.85
79.20
1.35
4.17
20
–
–
4.41
–
and
180.95
181.65
0.70
13.29
9
–
–
12.81
–
206.95
207.50
0.55
7.87
5
–
–
7.61
–
*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.016 x 0.95) + (Cu (%) x 1.96 x 0.95)+ (Mo (%)*7.35 x 0.95) and CuEq (%) is calculated as follows: (Cu (%) x 0.95) + (Au (g/t) x 0.51 x 0.95) + (Ag (g/t) x 0.01 x 0.95)+ (Mo(%)x 3.75 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Ag – $22/oz Mo US$15.00/lb and Au – US$1,400/oz and recovery rates of 95% for Au, Ag, Mo and Cu. Recovery rate assumptions are speculative as no metallurgical work has been completed to date.
** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.
*** NSV: No significant values
Figure 1: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Main Breccia discovery at Apollo Highlighting New Drill Holes APC17 & APC-18 and the Expanded Dimensions of the Discovery (CNW Group/Collective Mining Ltd.)
Figure 3: Apollo Target: Main Breccia Cross Section with Core Photo Highlights from APC-17 (CNW Group/Collective Mining Ltd.)
About Collective Mining Ltd.
To see our latest corporate presentation and related information, please visit www.collectivemining.com.
Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.
The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.
Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.
Qualified Person (QP) and NI43-101 Disclosure
David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).
Technical Information
Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.
FORWARD-LOOKING STATEMENTS
This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.
Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.
Vancouver, British Columbia–(Newsfile Corp. – November 28, 2022) – Goldshore Resources Inc. (TSXV: GSHR) (OTCQB: GSHRF) (FSE: 8X00) (“Goldshore” or the “Company“), is pleased to announce assay results from its ongoing 100,000-meter drill program at the Moss Lake Project in Northwest Ontario, Canada (the “Moss Lake Gold Project“).
Highlights:
Results for seven holes, drilled to expand the coverage of the high-grade shears in the QES Zone, have confirmed higher-grade shear-hosted gold mineralization within a large volume of well mineralized diorites. These results are all within the $1500 Whittle pit that constrains the current resource and identifies new high-grade shears. Best intercepts include:
1.51 g/t Au over 6.0m from 502.0m depth in MQD-22-075 and
1.47 g/t Au over 30.1m from 530.0m
8.45 g/t Au over 5.0m from 576m depth in MQD-22-076 including
36.9 g/t Au over 1.0m from 577m
1.87 g/t Au over 6.75m from 602.25m
1.31 g/t Au over 14.15m from 544.0m depth in MQD-22-080
2.07 g/t Au over 6.0m from 422.0m depth in MQD-22-085 and
1.07 g/t Au over 15.0m from 457.0m
1.26 g/t Au over 7.15m from 573.85m
1.07 g/t Au over 24.7m from 369.0m depth in MQD-22-087 and
2.15 g/t Au over 5.0m from 489.0m
1.75 g/t Au over 8.05m from 513.95m
2.11 g/t Au over 30.75m from 536.9m including
11.5 g/t Au over 3.1m from 555.2m
1.31 g/t Au over 63.6m from 427.0m depth in MQD-22-090A
2.07 g/t Au over 32.0m from 439.0m
A new parallel mineralized shear structure has been discovered 150m south of the main QES system containing high grade mineralization within a sheared intermediate volcanic package with best intercepts of:
3.44 g/t Au over 5.8m from 246.4m depth in MQD-22-080
1.22 g/t Au over 4.0m from 206.0m depth in MQD-22-087
1.15 g/t Au over 7.3m from 75.0m depth in MQD-22-090A
President and CEO Brett Richards stated: “The results from these drill holes in the QES Zone are part of a 52-hole data set that was not included in the recent mineral resource estimate. They confirm our belief that there are additional high-grade shear zones within the deposit that will potentially add to the shear domain component of the mineral resource that we anticipate will be prioritized in the mining schedule when we move towards conducting a preliminary economic analysis next year.”
Technical Overview
Figure 1 shows the better intercepts in plain view and Figure 2 is a typical section through hole MQD-22-087. Table 1 shows the significant intercepts. Table 2 shows the drill hole locations.
Figure 1: Drill plan showing best of several +1 g/t Au intercepts relative to shear and intrusion domains
Results have been received for six holes that have infilled areas of the QES Zone that are between sections drilled by historic holes with collar survey problems. As a result, they will replace the low-confidence historic holes in the upcoming resource model update.
A seventh hole was drilled to the southeast of the QES Zone to investigate two historical showing along a parallel structure of the QES Zone but did not intersect significant mineralization.
As with the historic holes, these holes intersected several broad zones of low-grade mineralization within the altered diorite intrusion host. Examples include 0.77 g/t Au over 83m from 493m depth in MQD-22-075; 0.41 g/t Au over 32.45m from 437.55m and 0.71 g/t Au over 131.1m from 493m in MQD-22-076; 0.54 g/t Au over 102m from 476m and 0.39 g/t Au over 27.95m from 643m in MQD-22-080; 0.78 g/t Au over 70m from 419m and 0.50 g/t Au over 28.75m from 521.25m in MQD-22-085; 0.50 g/t Au over 115.9m from 408.1m in MQD-22-087; and 0.48 g/t Au over 27.45m from 552.05m in MQD-22-090A.
All these low-grade zones occur as envelopes to higher-grade structures that form a three-dimensional, anastomosing shear network that has developed in response to strain on the altered diorite intrusion. Results include the broad zones of +1 g/t Au mineralization shown in the highlights (e.g., 1.31 g/t Au over 63.6m from 427m depth in MQD-22-090A) and several narrow high-grade intervals, including 10.1 g/t Au over 0.7m from 545.8m and 36.9 g/t Au over 1m from 577m in MQD-22-076; 10.0 g/t Au over 1m from 427m in MQD-22-085; 20.6 g/t Au over 0.9m from 370.65m, 28.3 g/t Au over 0.3m from 540.3m and 11.5 g/t Au over 3.1m from 555.2m in MQD-22-087; and 19.4 g/t Au over 1.15m from 455.85m in MQD-22-090A.
An additional parallel shear was discovered within the intermediate volcanic package approximately 150m south of the main QES system which contains broad intercepts of low-grade mineralization including 0.91 g/t over 24.8m from 246.4m in MQD-22-080; 0.33 g/t over 45.7m from 150.0m in MQD-22-085; 0.42 g/t over 39.0m from 189.0m in MQD-22-087 containing internal higher grade intercepts including 3.44 g/t Au over 5.8m from 246.4m depth in MQD-22-080; 1.22 g/t Au over 4.0m from 206.0m depth in MQD-22-087; 1.15 g/t Au over 7.3m from 75.0m depth in MQD-22-090A.
Importantly, these intercepts have identified additional high-grade shears not modelled in the recent Mineral Resource.
Pete Flindell, VP Exploration for Goldshore, said, “These drill results confirm high-grade shears that we have modelled at the QES Zone and confirmed additional shears that we expect to include in the next mineral resource update early next year.”
Table 1: Significant downhole gold intercepts
HOLE ID
FROM
TO
LENGTH (m)
TRUE WIDTH (m)
CUT GRADE (g/t Au)
UNCUT GRADE (g/t Au)
MQD-22-075
243.00
264.00
21.00
15.4
0.47
0.47
including
254.00
256.40
2.40
1.8
1.54
1.54
468.00
476.90
8.90
6.8
0.45
0.45
493.00
576.00
83.00
64.6
0.77
0.77
including
502.00
508.00
6.00
4.6
1.51
1.51
and
530.00
560.10
30.10
23.5
1.47
1.47
595.25
610.00
14.75
11.7
0.54
0.54
including
596.00
599.00
3.00
2.4
1.13
1.13
MQD-22-076
192.00
196.00
4.00
2.8
0.46
0.46
214.00
216.00
2.00
1.4
0.39
0.39
355.00
358.15
3.15
2.4
0.38
0.38
437.55
470.00
32.45
25.0
0.41
0.41
including
453.00
456.70
3.70
2.9
1.52
1.52
483.50
489.40
5.90
4.6
0.35
0.35
493.00
624.10
131.10
103.8
0.71
0.77
including
545.80
546.50
0.70
0.6
10.1
10.1
and
576.00
581.00
5.00
4.0
7.07
8.45
including
577.00
578.00
1.00
0.8
30.0
36.9
and
602.25
609.00
6.75
5.4
1.87
1.87
641.00
644.00
3.00
2.4
0.46
0.46
MQD-22-080
82.75
86.60
3.85
2.6
0.35
0.35
131.40
143.75
12.35
8.5
0.63
0.63
181.30
187.80
6.50
4.6
0.40
0.40
209.90
220.85
10.95
7.7
0.57
0.57
246.40
271.20
24.80
17.7
0.91
0.91
including
246.40
252.20
5.80
4.1
3.44
3.44
355.00
369.00
14.00
10.2
0.57
0.57
including
361.70
363.70
2.00
1.5
1.67
1.67
382.00
385.45
3.45
2.5
0.63
0.63
398.50
401.30
2.80
2.1
0.58
0.58
418.00
421.00
3.00
2.2
0.54
0.54
429.20
434.00
4.80
3.6
0.35
0.35
458.00
460.70
2.70
2.0
0.59
0.59
476.00
578.00
102.00
79.7
0.54
0.54
including
524.00
528.00
4.00
3.1
1.32
1.32
and
544.00
558.15
14.15
11.2
1.31
1.31
613.00
616.00
3.00
2.4
0.37
0.37
624.10
633.00
8.90
7.3
0.30
0.30
643.00
670.95
27.95
23.1
0.39
0.39
MQD-22-085
63.60
74.10
10.50
7.1
0.38
0.38
116.15
118.35
2.20
1.5
1.57
1.57
150.00
195.70
45.70
32.2
0.33
0.33
248.00
250.00
2.00
1.4
0.39
0.39
256.00
258.00
2.00
1.4
0.41
0.41
284.80
288.05
3.25
2.4
0.91
0.91
including
286.00
288.05
2.05
1.5
1.30
1.30
337.00
342.00
5.00
3.7
0.30
0.30
362.00
371.65
9.65
7.2
0.31
0.31
382.45
388.00
5.55
4.1
0.30
0.30
390.80
410.90
20.10
15.0
0.31
0.31
419.00
489.00
70.00
53.1
0.78
0.78
including
422.00
428.00
6.00
4.5
2.07
2.07
including
427.00
428.00
1.00
0.8
10.0
10.0
and
443.00
446.00
3.00
2.3
1.09
1.09
and
457.00
472.00
15.00
11.4
1.07
1.07
and
481.00
485.00
4.00
3.1
2.10
2.10
506.00
508.00
2.00
1.5
0.67
0.67
521.25
550.00
28.75
22.4
0.50
0.50
573.85
581.00
7.15
5.7
1.26
1.26
665.20
671.55
6.35
5.1
0.35
0.35
MQD-22-087
78.00
81.55
3.55
2.4
0.43
0.43
92.00
109.00
17.00
11.6
0.33
0.33
189.00
228.00
39.00
27.3
0.42
0.42
including
206.00
210.00
4.00
2.8
1.22
1.22
249.75
261.00
11.25
8.0
0.49
0.49
289.50
298.70
9.20
6.6
0.42
0.42
including
294.50
296.65
2.15
1.6
1.07
1.07
342.00
349.65
7.65
5.6
0.40
0.40
369.00
393.70
24.70
18.2
1.07
1.09
including
370.65
371.55
0.90
0.7
20.6
20.6
408.10
524.00
115.90
87.3
0.50
0.50
including
425.30
429.50
4.20
3.1
1.28
1.28
and
489.00
494.00
5.00
3.8
2.15
2.15
and
513.95
522.00
8.05
6.1
1.75
1.75
536.90
567.65
30.75
23.6
2.11
2.11
including
539.55
567.65
28.10
21.6
2.23
2.23
including
540.30
540.60
0.30
0.2
28.3
28.3
and
555.20
558.30
3.10
2.4
11.5
11.5
579.00
592.00
13.00
10.1
0.37
0.37
628.65
634.00
5.35
4.2
0.48
0.48
MQD-22-090A
75.00
82.30
7.30
3.8
1.15
1.15
including
78.00
81.55
3.55
1.8
2.05
2.05
94.00
98.00
4.00
2.1
0.54
0.54
133.00
146.00
13.00
7.0
0.35
0.35
193.00
196.00
3.00
1.6
0.39
0.39
227.70
230.60
2.90
1.6
0.53
0.53
238.55
240.85
2.30
1.3
0.42
0.42
245.00
252.25
7.25
4.0
0.35
0.35
287.35
292.75
5.40
3.0
0.44
0.44
427.00
490.60
63.60
37.7
1.31
1.31
including
427.00
429.00
2.00
1.2
1.10
1.10
and
439.00
471.00
32.00
19.0
2.07
2.07
including
455.85
457.00
1.15
0.7
19.4
19.4
503.85
508.00
4.15
2.5
0.73
0.73
519.00
541.00
22.00
13.3
0.35
0.35
including
525.00
527.00
2.00
1.2
1.47
1.47
552.05
579.50
27.45
16.8
0.48
0.48
including
574.00
576.00
2.00
1.2
1.14
1.14
Intersections calculated above at 0.3 g/t Au cut off with a top cut of 30 g/t Au and a maximum internal waste interval of 10 metres. Bordered intervals are intersections calculated above a 1.0 g/t Au cut off. Intervals in bold are those with a grade thickness factor exceeding 20 gram x metres / tonne gold. True widths are approximate and assume a subvertical body.
Table 2: Location of drill holes in this press release
HOLE
EAST
NORTH
RL
AZIMUTH
DIP
EOH
MQD-22-075
670,308
5,379,250
443
336°
-47°
675.1
MQD-22-076
670,379
5,379,296
442
338°
-47°
651.0
MQD-22-080
670,462
5,379,398
450
335°
-50°
675.05
MQD-22-083
670,667
5,379,431
433
156°
-50°
630.1
MQD-22-085
670,636
5,379,537
441
336°
-49°
675.0
MQD-22-087
670,546
5,379,463
449
336°
-49°
675.0
MQD-22-090A
670,654
5,379,625
429
346°
-60°
606.0
Approximate collar coordinates in NAD 83, Zone 15N
Analytical and QA/QC Procedures
All samples were sent to ALS Geochemistry in Thunder Bay for preparation and analysis was performed in the ALS Vancouver analytical facility. ALS is accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025. Samples were analyzed for gold via fire assay with an AA finish (“Au-AA23”) and 48 pathfinder elements via ICP-MS after four-acid digestion (“ME-MS61”). Samples that assayed over 10 ppm Au were re-run via fire assay with a gravimetric finish (“Au-GRA21”).
In addition to ALS quality assurance / quality control (“QA/QC”) protocols, Goldshore has implemented a quality control program for all samples collected through the drilling program. The quality control program was designed by a qualified and independent third party, with a focus on the quality of analytical results for gold. Analytical results are received, imported to our secure on-line database and evaluated to meet our established guidelines to ensure that all sample batches pass industry best practice for analytical quality control. Certified reference materials are considered acceptable if values returned are within three standard deviations of the certified value reported by the manufacture of the material. In addition to the certified reference material, certified blank material is included in the sample stream to monitor contamination during sample preparation. Blank material results are assessed based on the returned gold result being less than ten times the quoted lower detection limit of the analytical method. The results of the on-going analytical quality control program are evaluated and reported to Goldshore by Orix Geoscience Inc.
About Goldshore
Goldshore is an emerging junior gold development company, and owns the Moss Lake Gold Project located in Ontario. Wesdome Gold Mines Ltd. is currently a large shareholder of Goldshore with an approximate 27% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Lake Gold Project through the next stages of exploration and development.
About the Moss Lake Gold Project
The Moss Lake Gold Project is located approximately 100 km west of the city of Thunder Bay, Ontario. It is accessed via Highway 11 which passes within 1 km of the property boundary to the north. The Moss Lake Gold Project covers 14,292 hectares and consists of 282 unpatented and patented mining claims.
The Moss Lake Gold Project hosts a number of gold and base metal rich deposits including the Moss Lake Deposit (Table 3), the East Coldstream Deposit (Table 4), the historically producing North Coldstream Mine (Table 5), and the Hamlin Zone, all of which occur over a mineralized trend exceeding 20 km in length.
The Moss Lake Deposit hosts an estimated inferred mineral resource of 4.17 Moz Au (see Goldshore’s news release dated November 15, 2022). A technical report is being prepared in accordance with National Instrument 43-101 (“NI 43-101“) and will be available on the Company’s website and SEDAR within 45 days of November 15, 2022.
A historical mineral resource estimate (the “East Coldstream Historical Estimate“) was completed on the East Coldstream Deposit in 2011 by Foundation Resources Inc.2,3 The East Coldstream Deposit is a shear-hosted disseminated-style gold deposit which locally outcrops at surface. It has been drilled over a 1.3 km length and to depths of 200 m with 138 holes completed between 1988 and 2017. The deposit remains largely open at depth and may have the potential for expansion along strike. Historic drill hole highlights from the East Coldstream Deposit include 4.86 g/t Au over 27.3 m in C-10-15.
The historically producing North Coldstream Mine is reported to have produced significant amounts of copper, gold and silver4 from mineralization with potential iron-oxide-copper-gold deposit style affinity. The exploration potential immediately surrounding the historic mining area is not currently well understood and historic data compilation is required.
The Hamlin Zone is a significant occurrence of copper and gold mineralization, and also of potential iron-oxide-copper-gold deposit style affinity. Between 2008 and 2011, Glencore tested Hamlin with 24 drill holes which successfully outlined a broad and intermittently mineralized zone over a strike length of 900 m. Historic drill hole highlights from the Hamlin Zone include 0.9 g/t Au and 0.35% Cu over 150.7 m in HAM-11-75.
The Moss Lake, East Coldstream and North Coldstream deposits sit on a mineral trend marked by a regionally significant deformation zone locally referred to as the Wawiag Fault Zone in the area of the Moss Lake Deposit. This deformation zone occurs over a length of approximately 20 km on the Moss Lake Gold Project and there is an area spanning approximately 7 km between the Moss Lake and East Coldstream deposits that is significantly underexplored.
Table 3: Mineral Resource Estimate (Moss Lake Deposit) 1
Inferred Resources (Domains)
Tonnes (Mt)
Grade (g/t Au)
Contained Metal (Moz AU)
Shear
34.7
2.0
2.20
Intrusion
87
0.7
1.97
TOTAL
121.7
1.1
4.17
Notes:
(1) The Moss Lake Deposit hosts an estimated inferred mineral resource of 4.17 Moz Au (see Goldshore’s news release dated November 15, 2022). A technical report is being prepared in accordance with NI 43-101 and will be available on the Company’s website and SEDAR within 45 days of November 15, 2022.
Table 4: Historical Mineral Resources (East Coldstream Deposit) 2,3
INDICATED
INFERRED
Tonnes
Grade (g/t Au)
Oz Au
Tonnes
Grade (g/t Au)
Oz Au
East Coldstream Total
3,516,700
0.85
96,400
30,533,000
0.78
763,276
Notes: (2) Source: McCracken, T. “Technical Report and Resource Estimate on the Osmani Gold Deposit, Coldstream Property, Northwestern Ontario”, prepared for Foundation Resources Inc. and Alto Ventures Ltd. The East Coldstream Historical Estimate is based on a 0.4 g/t Au cut-off grade. The qualified persons for the East Coldstream Historical Estimate are Todd McCracken, P.Geo. (Tetratech Wardrop), and Jeff Wilson, Ph.D., P.Geo. (Tetratech Wardrop), and the effective date of the East Coldstream Historical Estimate is December 12, 2011. Resources are presented unconstrained, undiluted and in situ. The East Coldstream Historical Estimate includes 2 gold-bearing zones. A cut-off grade of 0.4 g/t Au was selected as the official resource cut-off grade. The East Coldstream Historical Estimate is based on 116 diamond drill holes drilled from 1986 to 2011. A fixed density of 2.78 g/cm3 was used. Capping was established at 5.89 g/t Au and 5.70 g/t Au for domains EC-1 and EC-2, respectively. This is supported by statistical analysis and the high grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Datamine Studio 3 version 3.20.5321.0. Resource categorization is based on spatial continuity based from the variography of the assays within the drillholes. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.
(3) The reader is cautioned that the East Coldstream Historical Estimate is considered historical in nature and as such is based on prior data and reports prepared by previous property owners. The reader is cautioned not to treat it, or any part of it, as current mineral resources or reserves. The Company has determined this historical resource is reliable, and relevant to be included here in that it demonstrates simply the mineral potential of the Moss Lake Gold Project. A qualified person has not done sufficient work to classify the East Coldstream Historical Estimate as a current resource and Goldshore is not treating the East Coldstream Historical Estimate as a current resource. Significant data compilation, re-drilling, re-sampling and data verification may be required by a qualified person before the East Coldstream Historical Estimate can be classified as a current resource. There can be no assurance that any of the historical mineral resources, in whole or in part, will ever become economically viable. In addition, mineral resources are not mineral reserves and do not have demonstrated economic viability. Even if classified as a current resource, there is no certainty as to whether further exploration will result in any inferred mineral resources being upgraded to an indicated or measured mineral resource category. The East Coldstream Historical Estimate relating to inferred mineral resources was calculated using prior mining industry standard definitions and practices for estimating mineral resource and mineral reserves. Such prior definitions and practices were utilized prior to the implementation of the current standards of the Canadian Institute of Mining for mineral resource estimation, and have a lower level of confidence.
Table 5: Reported Historical Production (North Coldstream Deposit) 4
Deposit
Tonnes
Cu %
Au g/t
Ag
Cu lbs
Au oz
Ag oz
Historical Production
2,700,0000
1.89
0.56
5.59
102,000,000
44,000
440,000
Note:
(4) Source: Schlanka, R., 1969. Copper, Nickel, Lead and Zinc Deposits of Ontario, Mineral Resources Circular No. 12, Ontario Geological Survey, pp. 314-316.
Peter Flindell, P.Geo., MAusIMM, MAIG, Vice President – Exploration of the Company, a qualified person under NI 43-101 has approved the scientific and technical information contained in this news release.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.
For More Information – Please Contact:
Brett A. Richards President, Chief Executive Officer and Director Goldshore Resources Inc.
This news release contains statements that constitute “forward-looking statements.” Such forward looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur.
Forward-looking statements in this news release include, among others, statements relating to expectations regarding the exploration and development of the Moss Lake Gold Project, plans to conduct a preliminary economic assessment and timing thereof, updating the mineral resource estimates, the filing of a technical report to support the mineral resource estimate at the Moss Lake Deposit, and other statements that are not historical facts. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors and risks include, among others: the Company may require additional financing from time to time in order to continue its operations which may not be available when needed or on acceptable terms and conditions acceptable; compliance with extensive government regulation; domestic and foreign laws and regulations could adversely affect the Company’s business and results of operations; the stock markets have experienced volatility that often has been unrelated to the performance of companies and these fluctuations may adversely affect the price of the Company’s securities, regardless of its operating performance; the ongoing military conflict in Ukraine; and other risk factors outlined in the Company’s public disclosure documents.
The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. The Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.
Check out this great interview with Judson Culter the CEO of Rover Metals, as the company is expanding its portfolio onto critical minerals. Will shareholders have a positive reaction to the new portfolio diversification? Find out right here!
A CRITICAL MINERALS EXPLORATION COMPANY Rover Metals (“Rover”) is a publicly traded Canadian junior mining company specialized in North American critical minerals and precious metal development-stage mining projects. Rover’s twelve month forward-looking plan is to advance exploration at our Nevada Claystone Lithium project and at our Northern Canada Zinc-Copper project, located near the city of Yellowknife, NT, Canada. The Indian Mountain Lake Project is the Company’s first district scale land package, representing approximately 30,000 acres of greenstone belt.
Rover Metals also has 100% ownership of several gold mining assets located near to the city of Yellowknife, NT. Rover obtained a public listing for its securities on the TSX Venture Exchange as a Tier II Mining Issuer on June 26, 2018.
Rover Metals trades under the symbol “ROVR” on the TSXV. Rover also obtained a public co-listing of its securities on the OTCQB on January 17, 2019 (OTCQB: ROVMF), and on the Frankfurt Stock Exchange on February 1, 2021 (FRA: 4XO).
The Company is run by an experienced management team and board that are career mining executives. Our management team and board have a proven history financing the development of mining projects, taking them into production, and re-selling them.
The Best Video on Why and When to Buy and Sell Physical Precious Metals:
I’m a licensed broker for Miles Franklin Precious Metals Investments, The Only Online Dealer that is Licensed and Bonded (Period)! Where we provide unlimited options to expand your precious metals portfolio, from:
Special Thanks to Chris Marcus of Arcadia Economics: https://arcadiaeconomics.com/
The Best Video on Why and When to Buy and Sell Physical Precious Metals:
Proven and Probable Where we deliver Mining Insights & Bullion Sales. I’m a licensed broker for Miles Franklin Precious Metals Investments, The Only Online Dealer that is Licensed and Bonded (Period)! Where we provide unlimited options to expand your precious metals portfolio, from
VANCOUVER, British Columbia, Nov. 21, 2022 (GLOBE NEWSWIRE) — Rover Metals Corp. (TSXV: ROVR) (OTCQB: ROVMF) (FSE:4XO) (“Rover” or the “Company”) announces that further to its releases of September 20, 2022, and November 17, 2022, it is pleased to announce that it has now received Toronto Venture Exchange (“TSXV”) approval of its definitive agreement to option a 100% ownership interest in a claystone lithium project (the “Option Agreement”) located in the southwest lithium jurisdiction of the state of Nevada, USA. The Option Agreement is dated with an effective date of November 16, 2022. The land package under option is a district scale lithium claystone deposit situated on Bureau of Land Management land.
Let’s Go Lithium Property, NV, USA The Let’s Go Lithium claystone property is located in Nevada’s famous southwest lithium jurisdiction and is approximately 6,000 acres in size. The Company, through the vendor of the project, and through ALS Laboratories, has verified high-grade lithium surface samples at the project. Highlights of these surface grab samples processed by ALS Laboratories include: Sample# AMZ-8 of 780ppm Li, Sample# AMZ-26 of 910ppm Li, and Sample# AMZ-28 of 710ppm Li. The Company has pulled additional surface grab samples from the project and analysed them with a Handheld Laser Induced Breakdown Spectroscopy (“HH LIBS”). Highlights of the HH LIBS include: 1,218 ppm Li, 778 ppm Li, 724 ppm Li, and 707 ppm Li.
The project includes green energy infrastructure of hydro power lines, and has direct road access, and a nearby town with a readily available work force.
Later-stage comparable claystone lithium projects include Cypress Development’s Clayton Valley project; American Lithium’s TLC project; Noram Lithium’s Zeus project, and Iconic Minerals’ Bonnie Claire project. All of the aforementioned companies are later-stage mining companies, with a NI 43-101 resource definition. Rover’s Nevada Lithium project is greenfields in nature, with no drilling to date. Historic water well drilling at the Let’s Go Lithium property by the USGS indicates that the claystone is near to surface, and over 90 meters in average thickness.
Summary of Future Commitments Under the Option Agreement To earn a 100% ownership interest in the Let’s Go Lithium project the company is required to compensate the owner of project as follows:
Cash
Common Shares
Exploration Commitments
Year 1
Nil
USD20,000 worth of common shares to be issued at the greater of: (1) the 5-day VWAP leading up to January 31, 2023; or (2) $0.065.
Nil
Year 2
USD20,000
USD100,000 of common shares to be issued at the greater of: (1) the 5-day VWAP leading up to January 31, 2024; or (2) $0.065.
USD200,000
Year 3
USD75,000
USD150,000 of common shares to be issued at the greater of: (1) the 5-day VWAP leading up to January 31, 2025; or (2) $0.065.
Nil
Year 4
USD80,000
USD250,000 of common shares to be issued at the greater of: (1) the 5-day VWAP leading up to January 31, 2026; or (2) $0.065.
Nil
Year 5
USD100,000
Nil
Nil
Year 6
USD150,000
Nil
Nil
Year 7
USD75,000
Nil
Nil
Milestone payment at anytime, including after Year 7, of USD500,000 and Rover Metals’ common shares worth USD500,000 to be issued at the greater of: (1) the 5-day VWAP leading up to the date of issuance; or (2) $0.065.
A 2% net smelter royalty (“NSR”) on the first marketable product from the property, less allowable deductions. The NSR includes a one-mile area of interest surrounding the project.
Technical information has been approved by David White, P.Geo., QP for the purposes of NI 43-101. ALS Laboratories is ISO/IEC 17025:2017 and ISO 9001:2015 certified.
Judson Culter, CEO at Rover Metals, states, “The Biden Administration’s Bill for Inflation Reduction and Energy puts milestones in place for critical minerals like Lithium to be produced within North America effective January 1, 2023. Given the mining friendly jurisdiction of Nevada, and the nature of claystones, we see the Let’s Go Lithium project as a shovel ready, fast-tracked opportunity for development.”
About Rover Metals Rover is a publicly traded junior mining company that trades on the TSXV under symbol ROVR, on the OTCQB under symbol ROVMF (temporarily as ROVMD), and on the FSE under symbol 4XO. The Company is now developing both: (1) critical minerals projects; as well as (2) precious metals projects. The Company is exclusive to the mining jurisdictions of Canada and the U.S. Five of the Company’s existing mineral resource development projects are located near to the city of Yellowknife, 60th parallel, Canada.
ON BEHALF OF THE BOARD OF DIRECTORS “Judson Culter” Chief Executive Officer and Director
For further information, please contact: Email: info@rovermetals.com Phone: +1 (778) 754-2617
Statement Regarding Forward-Looking Information This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause Rover’s actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur. There can be no assurance that such statements prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements, and readers are cautioned not to place undue reliance on these forward-looking statements. Any factor could cause actual results to differ materially from Rover’s expectations. Rover undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.
THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE REPRESENTS THE EXPECTATIONS OF THE COMPANY AS OF THE DATE OF THIS NEWS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE COMPANY MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE LAWS.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OF THIS RELEASE.
North Vancouver, British Columbia–(Newsfile Corp. – November 18, 2022) – Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) (“Lion One” or the “Company”) is pleased to announce that the Company has produced additional bonanza-grade drilling intercepts and expanded the Deep Feeder Zone 500 by increasing the vertical extent of the URW3 Lode by at least 180 m at its high-grade Tuvatu Alkaline Gold Project in Fiji.
The results from these holes confirm a significant increase in the vertical extension and continuity of the URW3 mineralized zone, which occurs on the western margin and as part of the high-grade feeder zone. The new drill intercepts, in conjunction with results from the previously drilled TUG-138 drill hole, correspond to a significant increase in grade with depth, as numerous bonanza-grade intercepts return gold assay values ranging from 100-800 g/t gold. Additionally, this drilling confirms an increase in the vertical extent of this distinct portion of the 500 zone feeder by at least 180 m. The high-grade feeder zone remains open at depth.
Overall, the drill results reported here are consistent with a persistent, substantial upside being realized at Tuvatu resulting from the aggressive deep drilling adopted by the company since the initial discovery of the deep feeder zone by hole TUDDH-500, in July of 2020.
Highlights:
An increase of at least 180 m in the vertical extent of the URW3 lode as defined by bonanza grade intercepts
Multiple high-grade intercepts including from TUG-149 including 12.89 g/t Au over 12.9 m from 254.4 m, 84.61 g/t Au over 3.9 m from 318.6 m, and 48.65 g/t Au over 5.4 m from 423.3 m
Definition of a new portion of deep, high-grade feeder material that is separate from, and parallel to, the high-grade zone previously defined by TUG-141/TUDDH-601/TUDDH-608
Select high-grade intercepts
Hole ID
From (m)
To (m)
Intercept (m)
Au g/t
TUG-149
254.4
267.3
12.9
12.89
including
259.2
259.5
0.3
134.97
318.6
322.5
3.9
84.61
including
321.3
321.6
0.3
536.50
321.6
321.9
0.3
530.60
423.3
428.7
5.4
48.65
including
426.0
426.3
0.3
802.47
TUDDH-613
529.0
529.3
0.3
108.52
TUDDH-616
624.2
631.7
7.5
9.43
including
624.2
626.6
2.4
12.11
and
627.2
628.7
1.5
23.59
which includes
627.5
627.8
0.3
63.86
Technical advisor to the Company, Dr. Quinton Hennigh commented: “This drilling is leading us closer and closer to the main conduits of this remarkable high-grade gold system. Without question, URW3 is turning into a big branch of the ‘tree.’ The junction between it and the rest of the 500 Zone looks like it forms a pipe, perhaps the one that has allowed mineralizing fluids to flow upwards. If we chase this down with further drilling, I think it could lead us to parts of the system in which considerable gold was deposited. We must keep drilling.“
Drill holes TUDDH-613 and 616, and TUG-149 were designed to follow up the previously announced discovery of the very high-grade zone of Au mineralization discovered by hole TUG-141 (Read June 6, 2022 News Release), and subsequently followed up by holes TUDDH-601 (Read August 15, 2022 News Release), and TUDDH-608 (Read Nov. 7, 2022 News Release). Holes TUG-149, TUDDH-613, and TUDDH-616 all intersected a distinct zone, located approximately 60 m to the west of the TUG-141 structural corridor, that corresponds to the down-dip projection of the URW3 lode (Figure 1). The substantial bonanza-grade intercepts (Figure 2) in these drill holes, along with the high-grade intercepts in a previously reported hole TUG-138 (Read June 6, 2022 News Release) of 23.14 g/t Au over 3.0 m including 118.6 g/t Au over 0.3 m, collectively define a significant vertical extension to URW3 of at least 180 m.
Sr. Vice-President of Exploration, Sergio Cattalani states: “This is yet another major advance in our continuing efforts to follow and delineate what is increasingly understood to be the principal high-grade feeder at Tuvatu. While we believe we are rapidly defining major portions of the feeder structures, we are also confident that we are in no way near its base. This feeder is developing into a bonanza-grade zone defined by multiple major channel-ways that appear to coalesce. With the TUG-141/TUDDH-601/608 zone, and now the URW3 zone, we have at least two, distinct but likely interconnected corridors of continuous high-grade mineralization to follow up. We’re just getting started…“
Figure 1 below represents a 15 m thick longitudinal section along the dip-extent of the URW3 lode, and illustrates the effect of TUG-149, TUDDH-613, and TUDDH-616 on what appears to be the downward extension of this important structure. The TUDDH-613 and TUDDH-616 traces are relatively short because the holes are oblique to the section. TUG-149 appears as a longer continuous trace as it remained at a very low angle to the dip of the URW3 lode. This is also reflected by the long interval of 12.9m of 12.89 g/t Au from 254.4-267.3m depth. TUG-138 (red diamonds) was a pre-existing hole, but in light of the most recent drill results, is now interpreted to also form part of the downward extension of the URW3 lode.
Figure 1. Longitudinal section, 15 m in thickness in the plane of the URW3 lode (striking N007°, dipping -79°SE). Red dots represent new intercepts reported here; Red diamonds represent intercepts previously reported by hole TUG-138. Photos of selected intercepts above in Figure 2.
Figure 2:Plate A: ladder-style vein at low angle to core axis, TUG-149: 251.4m, 35.36 g/t Au; Plate B: close-up view of mineralization consisting of euhedral pyrite and sphalerite in a matrix consisting of a very fine mixture of silica and dark brown pyrite, TUG-149: 259.5m, 134.97 g/t Au; Plate C: coarse VG on edge of quartz-pyrite veinlet, TUG-149: 321.6m, 536.5 g/t Au; Plate D: very coarse VG in quartz-pyrite veinlet, TUG-149: 426.1m, 802.5 g/t Au; Plate E: ladder-style quartz-pyrite vein, TUDDH-616: 605.5m, 17.10 g/t Au; Plate F: edge of dark silica-pyrite hydrothermal breccia vein, TUDDH-616: 615.5m, 24.89 g/t Au; Plate G: very coarse crystalline and wire VG in a vug along a quartz-pyrite vein, TUDDH-616: 627.5m, 63.86 g/t Au; Plate H: close-up view of the coarse crystalline and wire gold in same sample as Plate G, photographed using a field binocular microscope.
Table 1: Includes the location and other information for listed DDH holes
HOLE ID
EASTING
NORTHING
ELEVATION
AZIMUTH
DIP
DEPTH (M)
TUG-149
1876438
3920584
115.1
115.0
-77.0
in progress
TUDDH-613
1876280
3920472
286.3
90.0
-68.0
869.90
TUDDH-616
1876280
3920472
286.3
92.0
-71.0
767.70
Table 2: Drilling intervals returning >0.5 g/t Au. Intervals > 3.0 g/t Au cutoff are displayed in red. Intervals > 9.0 g/t Au or longer than 1.2 m are displayed in bold.
Hole ID
From (m)
To (m)
Interval (m)
Au g/t
TUG-149
187.5
188.1
0.6
0.86
208.5
208.8
0.3
0.72
236.1
237.0
0.9
1.85
245.4
248.1
2.7
1.49
251.1
252.0
0.9
13.77
including
251.4
251.7
0.3
35.36
254.4
267.3
12.9
12.89
including
255.0
255.3
0.3
5.60
including
255.9
256.2
0.3
44.14
including
256.2
256.5
0.3
59.64
including
256.8
257.1
0.3
17.64
including
257.1
257.4
0.3T
33.17
including
257.4
257.7
0.3
17.41
including
257.7
258.0
0.3
46.76
including
258.0
258.3
0.3
29.45
including
259.2
259.5
0.3
134.97
including
259.5
259.8
0.3
15.90
including
259.8
260.1
0.3
5.86
including
260.1
260.4
0.3
60.19
including
260.4
260.7
0.3
21.32
including
261.3
261.6
0.3
14.55
including
261.6
261.9
0.3
7.95
312.0
313.5
1.5
16.02
including
312.6
312.9
0.3
60.03
including
312.9
313.2
0.3
12.02
including
313.2
313.5
0.3
6.60
315.0
315.6
0.6
1.72
318.6
322.5
3.9
84.61
including
318.9
319.2
0.3
7.48
including
321.3
321.6
0.3
536.50
including
321.6
321.9
0.3
530.60
including
321.9
322.2
0.3
5.32
353.1
353.4
0.3
0.59
359.4
360.0
0.6
5.26
including
359.4
359.7
0.3
8.89
390.3
390.6
0.3
0.53
393.6
393.9
0.3
0.58
394.8
395.7
0.9
0.71
401.7
402.3
0.6
0.87
419.7
420.0
0.3
1.93
423.3
428.7
5.4
48.65
including
424.8
425.1
0.3
5.53
including
425.1
425.4
0.3
5.26
including
425.7
426.0
0.3
17.53
including
426.0
426.3
0.3
802.47
including
426.6
426.9
0.3
6.31
including
426.9
427.2
0.3
7.05
including
427.8
428.1
0.3
18.01
432.3
432.9
0.6
0.58
441.0
441.3
0.3
9.20
486.4
490.6
4.2
8.96
including
487.0
487.3
0.3
7.22
including
487.9
488.2
0.3
5.88
including
488.2
488.5
0.3
10.33
including
489.1
489.4
0.3
7.67
including
489.4
489.7
0.3
49.97
including
489.7
490.0
0.3
35.57
hole still in progress
TUDDH-613
35.5
36.1
0.6
0.59
37.0
37.9
0.9
0.78
160.4
161.0
0.6
1.38
452.2
452.5
0.3
0.68
529.0
529.3
0.3
108.52
531.1
532.0
0.9
0.82
535.6
543.1
7.5
2.76
including
539.8
543.1
3.3
5.45
which includes
540.7
541.3
0.6
25.10
551.2
554.2
3.0
8.39
including
551.2
552.1
0.9
5.02
including
552.1
552.7
0.6
11.67
including
553.3
553.9
0.6
9.36
including
553.9
554.2
0.3
24.54
580.0
580.9
0.9
0.50
594.6
596.1
1.5
0.65
627.4
631.9
4.5
0.96
633.7
634.0
0.3
0.71
755.0
755.3
0.3
0.51
TUDDH-616
36.8
37.7
0.9
0.70
604.6
607.9
3.3
2.99
including
605.2
606.1
0.9
8.65
which includes
605.2
605.5
0.3
17.10
614.8
617.6
2.8
5.73
including
615.1
616.4
1.3
11.55
which includes
615.4
615.7
0.3
24.89
618.8
620.3
1.5
3.91
including
618.8
619.4
0.6
7.61
624.2
631.7
7.5
9.43
including
624.2
626.6
2.4
12.11
including
627.2
628.7
1.5
23.59
which includes
627.2
627.5
0.3
37.09
and also includes
627.5
627.8
0.3
63.86
including
629.9
631.1
1.2
3.43
633.5
634.7
1.2
16.76
including
634.1
634.7
0.6
29.54
636.5
637.1
0.6
0.59
About Tuvatu The Tuvatu Alkaline Gold Project is located on the island of Viti Levu in Fiji. The January 2018 mineral resource for Tuvatu as disclosed in the technical report “Technical Report and Preliminary Economic Assessment for the Tuvatu Gold Project, Republic of Fiji”, dated September 25, 2020, and prepared by Mining Associates Pty Ltd of Brisbane Qld, comprises 1,007,000 tonnes indicated at 8.50 g/t Au (274,600 oz. Au) and 1,325,000 tonnes inferred at 9.0 g/t Au (384,000 oz. Au) at a cut-off grade of 3.0 g/t Au. The technical report is available on the Lion One website at www.liononemetals.com and on the SEDAR website at www.sedar.com.
Qualified Person In accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43- 101”), Sergio Cattalani, P.Geo, Senior Vice President Exploration, is the Qualified Person for the Company and has reviewed and is responsible for the technical and scientific content of this news release.
QAQC Procedures Lion One adheres to rigorous QAQC procedures above and beyond basic regulatory guidelines in conducting its sampling, drilling, testing, and analyses. The Company utilizes its own fleet of diamond drill rigs, using PQ, HQ and NQ sized drill core rods. The drill core is logged and split by Lion One personnel on site. Samples are delivered to and analyzed at the Company’s geochemical and metallurgical laboratory in Fiji. Duplicates of all samples with grades above 0.5 g/t Au are both re-assayed at Lion One’s lab and delivered to ALS Global Laboratories in Australia (ALS) for check assay determinations. All samples for all high-grade intercepts are sent to ALS for check assays. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10.00 g/t Au are then re-analyzed by gravimetric method. For samples that return greater than 0.50 g/t Au, repeat fire assay runs are carried out and repeated until a result is obtained that is within 10% of the original fire assay run. Lion One’s laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples are sent to ALS labs in Townsville QLD and are analyzed by the same methods (Au-AA26, and Au-GRA22 where applicable). ALS also analyses 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES (method ME-ICP61).
About Lion One Metals Limited Lion One’s flagship asset is 100% owned, fully permitted high-grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One’s CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.
On behalf of the Board of Directors of Lion One Metals Limited “Walter Berukoff“, Chairman and CEO
Neither the TSX Venture Exchange nor its Regulation Service Provider accepts responsibility for the adequacy or accuracy of this release
This press release may contain statements that may be deemed to be “forward-looking statements” within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward-looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “proposed”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Limited’s current beliefs and is based on information currently available to Lion One Metals Limited and on assumptions Lion One Metals Limited believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Limited or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Limited, general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Limited has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Limited does not undertake to update any forward-looking information, except in accordance with applicable securities laws.
VANCOUVER, British Columbia, Nov. 16, 2022 (GLOBE NEWSWIRE) — Rover Metals Corp. (TSXV: ROVR) (OTCQB: ROVMF) (FSE:4XO) (“Rover” or the “Company”) is pleased to announce a non-brokered private placement financing for a minimum of $350,000 and a maximum of $800,000. The Company will issue $0.08 units. Each unit is priced at $0.08 and is comprised of one common share and one common share purchase warrant (the “Units”). The warrants on the Units have an exercise price of $0.12 per warrant share, and a life of two and half (2 ½) years. Assuming the financing is fully subscribed, there will be up to 10,000,000 common shares and 10,000,000 common share purchase warrants issued in connection with this financing, plus any finder’s commission warrants.
Further to the above announcement, Rover has also now received approval from the Toronto Venture Exchange (TSXV) to close the first tranche of the Unit financing for gross proceeds of $376,000 (the “First Closing”). The Company will issue of 4,700,000 common shares and 4,700,000 warrants. Finders’ commissions are being paid in connection with the First Closing in the amount of cash commissions of $13,312.50 and finders’ warrants of 266,250. The finder’s warrants will have an exercise price of $0.12 and a useful life of two and half (2 ½) years. The shares and warrants issued under the First Closing will bear the minimum four-month regulatory hold period from the date of issuance.
An updating release will be provided once the Company has completed the Unit financing.
Shares for Services Agreement The TSXV has also approved a common shares for services issuance pursuant to a previously approved consulting agreement with one of the Company’s former arm’s length advisors. Services in the amount of $22,500 for the three-month period from July 1, 2022 to September 30, 2022 will be paid through the issuance of 187,500 common shares at a deemed price of $0.12 per share. The arm’s length advisory agreement expired effective September 30, 2022. The shares will bear the minimum four-month regulatory hold period from the date of issuance.
About Rover Metals Rover is a publicly traded junior mining company that trades on the TSXV under symbol ROVR, on the OTCQB under symbol ROVMF (temporarily trading as ROVMD), and on the FSE under symbol 4XO. The Company is now developing a diverse portfolio of mineral resource projects: (1) Nevada Claystone Lithium; (2) Zinc-Copper-Lead-Silver in NT, Canada; as well as (3) Gold in NT, Canada. The Company is exclusive to the mining jurisdictions of the U.S. and Canada.
ON BEHALF OF THE BOARD OF DIRECTORS “Judson Culter” Chief Executive Officer and Director
For further information, please contact: Email: info@rovermetals.com Phone: +1 (778) 754-2617
Statement Regarding Forward-Looking Information This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause Rover’s actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur. There can be no assurance that such statements prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements, and readers are cautioned not to place undue reliance on these forward-looking statements. Any factor could cause actual results to differ materially from Rover’s expectations. Rover undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.
THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE REPRESENTS THE EXPECTATIONS OF THE COMPANY AS OF THE DATE OF THIS NEWS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE COMPANY MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE LAWS.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OF THIS RELEASE.
TORONTO, Nov. 16, 2022 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce that it has expanded the scope of its 2022 drill program at the Guayabales project. Following the Company’s recent $10.7 million bought deal financing, combined with the exploration team’s analysis of recent assay results, the Board of Directors has approved an additional 3,000 metres of drilling at the Apollo target (“Apollo”) over the balance of 2022. As a result, the Company now expects to complete approximately 23,000 metres of drilling in 2022.
The Company has already released assay results from the first 14 holes at Apollo and expects to release additional results from holes APC-15 through APC-25 over the near term. Three rigs continue to turn at Apollo with the majority of holes focused on expanding the Main Breccia discovery which has nearly tripled in potential dimension with recent drilling results and now measures 385 metres along strike by 350 metres across by 825 metres depth. Presently, drill holes APC-26 through APC-28 are advancing on schedule. Previously announced results from the Main Breccia discovery at Apollo include:
Hole
Intercept(m)
Au (g/t)
Ag (g/t)
Cu %
Zn %
Pb %
Mo %
AuEq (g/t) *
APC-2
207.15
1.46
45
0.31
0.08
0.05
0.002
2.68
APC-8
265.75
1.26
55
0.22
0.07
0.05
0.045
2.44
APC-12
237.70
1.15
72
0.38
0.08
0.07
0.001
2.88
* See press releases dated August 10th, September 13th and October 6th respectively.
While plans for the 2023 drill program are currently being finalized for the Board of Directors approval prior to year-end, the Company plans to continue its aggressive drilling approach at Apollo with an aim of expanding the Main Breccia discovery even further while testing other targets at Apollo in 2023.
“Drilling at the Guayabales project in 2022 has yielded remarkable success with four distinct discoveries made across five tested targets. The obvious highlight has been the Main Breccia system at Apollo; a truly exciting high-grade and bulk tonnage copper-silver-gold discovery. Importantly, the Guayabales project is located in the heart of a 500+ year old mining camp with ten fully permitted and operating mines located within three kilometers of the project. As a result, infrastructure is abundant with hydroelectric power traversing the project in multiple locations and abundant skilled mining labor located in the surrounding towns. We look forward to continue advancing the project aggressively and are confident that Guayabales will be an important contributor to the Colombian government’s bold plan to produce energy transition metals in the near term,” stated Ari Sussman, Executive Chairman of Collective Mining.
About Collective Mining Ltd.
To see our latest corporate presentation and related information, please visit www.collectivemining.com
Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.
The Company’s flagship project, Guayabales, is anchored by a major bulk-tonnage and high-grade copper, silver and gold discovery at the Apollo target. The Company’s near-term objective is to continue with expansion drilling while increasing confidence in the highest-grade portions of the system.
Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.
Qualified Person (QP) and NI43-101 Disclosure
David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).
Technical Information
Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.
FORWARD-LOOKING STATEMENTS
This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.
Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.
