Vancouver, British Columbia–(Newsfile Corp. – November 8, 2022) – Provenance Gold Corp. (CSE: PAU) (OTCQB: PVGDF) (the “Company” or “Provenance“) is pleased to announce that a NI 43-101 technical report has been filed on SEDAR for its Eldorado gold property in Malheur County, Oregon. The purpose of this report was to form a baseline for the property, which will be expanded further in 2023 following a confirmation drilling program planned by the Company. Eldorado has a historic drill hole database consisting of 242 drill holes that have outlined a large shallow open-ended gold system. This historical database is currently not sufficient as the basis for developing a current mineral resource, but work is underway to verify and bring current the historical data.
In 1990 the first mineral inventory was calculated by Pincock, Alan and Holt (PAH) a reputable engineering firm that was used industry wide for this type of work. PAH modeled 158 of the historic drill holes which identified approximately 52,896,000 tons that graded 0.578 g/t gold (0.0169 oz/t gold) at a cut-off of 0.274 grams per ton (0.008 oz/t) in the completely open-ended gold system. The Company is aware of a second historical resource estimate that was calculated by ICAN Minerals and a further projected resource estimate by ICAN from work completed between 1989 and 1997 where the tonnage and grade were substantially higher. The Company is not treating any of these estimates as current mineral resources and a qualified person has not done sufficient work to classify the estimates as current mineral resources. The estimates were prepared prior to the enactment of National Instrument 43-101 and should not be relied upon for investment decisions. The purpose of presenting this information is to show that the Eldorado property has potential to hold a large mineral inventory. Provenance plans to update these historical estimates into a current resource model. Near term work includes confirmation drilling by twinning a number of the historic holes, certifying and comparing assays between the old and new holes, validating all historic holes in the field with a GPS and confirming historic metallurgical test results. When the Company is comfortable with these upgrades in compliance, then a new stand-alone current resource can be calculated. Other than these, the Company is not aware of any more recent estimates prepared for the property.
Within the Eldorado mineralized area there are many higher-grade zones. For example, as quoted from the NI 43-101 report, ICAN Minerals’ hole R-96-C-1 intersected 1.51 g/t gold (0.0441 oz/t gold) over 196.9 meters (646 feet). The estimate predates and does not comply with current CIM Definition Standards but illustrates that the gold system is large and extends to depth, not just in area.
Examples of High Gold Intercepts in Some Drill Holes
“The Eldorado magmatic/hydrothermal system is interpreted as a classic porphyry gold system. Gold is found in veinlets, stockworks, fractures, and hydrothermal breccias. Mineralization is controlled by both strong fracture development and pyrite veining coincident with gold mineralization. Pyrite veining, or its oxidized equivalent, is common throughout all of the drill holes.”
The historic metallurgical work suggests the gold is largely recoverable by standard methods. Dawson Metallurgical Laboratories and Mountain States R&D International conducted metallurgical tests that were encouraging, and these tests will be duplicated using material obtained from the upcoming drill program.
“Dawson composited five unoxidized sulfide-bearing samples into a 13.15 kg test sample that assayed 1.233 g/t gold (0.036 oz/t gold). Pyrite was found to be the most common sulfide. Approximately 90% of the gold was recovered by two-stage gravity-flotation. Significant free gold was observed in both the gravity and flotation concentrates.”
Additionally.
“The Mountain States laboratory conducted a series of bottle-roll tests on composite sulfide samples from the Property. Three composite test samples yielded recoveries on unground rock that yielded 71%, 76%, and 77% recoveries. Grinding increased the recoveries to 92%, 86%, and 83%.”
Based on Historic Metallurgy, Gold in Both the Oxidized Rock (yellow) and Unoxidized Rock (grey) is Readily Recoverable by Conventional and Even Non-Chemical Methods
After review of the historic drilling and after surface inspection of the Eldorado Property, Provenance believes the gold system is open to expansion in all directions and will also expand with in-fill drilling. The Company believes that the area of mineralization extends far beyond initially thought, and the surface mineralization expands even further.
Steve Craig, Project Manager states, “With future drilling programs, this project will grow with step-out and infill drilling. Even in the central area, some major mineralized areas remain partially drilled. An important early additional plus is that the historic metallurgy by reputable laboratories indicated the gold is mostly recoverable even in the sulfide zone, by gravity and flotation in addition to standard chemical extraction. This is because the gold appears to have come in after the pyrite, so it’s exposed and accessible to recovery. This is unusual and very fortunate.”
The report concludes that the favorable geological setting of the Property, as well as mineralization intersected in historic drill programs indicate the presence of porphyry style gold mineralization at the Eldorado Property. Based on Mr. Gibson’s site inspection, as well as the authors’ review of historic and recent work completed at the Property, it is the opinion of the authors of this Report that the Eldorado Property is a property of merit that warrants future exploration.
As a result, the authors recommend a staged exploration program for the Property, with Phase 2 exploration being dependent on the results of Phase 1.
The Company will report on its next steps for advancing the Eldorado Property within the coming weeks. The Company has now submitted all the final permitting documents requested and required by DOGAMI, to finalize the review process. The Company is unaware of any further issues likely to arise and has been told that no further information will be required to complete the permit. Site visits to the property have identified additional areas of obvious surface mineralization. Based on these studies, the Company wants to expand the currently planned drilling to include some of these areas inside and outside the historically drilled area. The Company plans to conduct its initial drilling program in the Spring to allow use of the new information to help guide exploration of these undrilled areas and to take advantage of more favorable weather. More will be reported on these newly recognized mineralized areas in the very near future.
NI 43-101 Technical Report
An NI 43-101 Technical Report (the “Report”) entitled “Technical Report on the Eldorado Property, Malheur County, Oregon ” has been completed and filed on behalf of the Company. The report was completed by Michael Dufresne, M.Sc., P.Geol., P.Geo. of Apex Geosciences Ltd. and Jodie Gibson, M.Sc., P.Geo. with an effective date of October 20, 2022. The report was prepared to provide an independent evaluation of the exploration potential of the Eldorado Property. The Report has been posted on the Company’s website and is available on SEDAR.
Qualified Person
Steven Craig, CPG, an independent consultant and qualified person as defined under National Instrument 43-101, has reviewed and approved the technical contents of this news release.
About Provenance Gold Corp.
Provenance Gold Corp. is a precious metals exploration company with a focus on gold and silver mineralization within North America. The Company currently holds interests in three properties, two in Nevada, and one in eastern Oregon, USA. For further information please visit the Company’s website at https://provenancegold.com or contact Rob Clark at rclark@provenancegold.com.
On behalf of the Board, Provenance Gold Corp. Rauno Perttu, Chief Executive Officer
Neither the Canadian Securities Exchange, nor its regulation services provider, accepts responsibility for the adequacy or accuracy of this press release. This news release may contain certain “Forward-Looking Statements” within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When or if used in this news release, the words “anticipate”, “believe”, “estimate”, “expect”, “target, “plan”, “forecast”, “may”, “schedule” and similar words or expressions identify forward-looking statements or information. Such statements represent the Company’s current views with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by the Company, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Many factors, both known and unknown, could cause results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements or information to reflect changes in assumptions or changes in circumstances or any other events affecting such statements and information other than as required by applicable laws, rules and regulations.
North Vancouver, British Columbia–(Newsfile Corp. – November 7, 2022) – Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) (“Lion One” or the “Company”) is pleased to announce results from hole TUDDH 608 as part of its ongoing deep drill program in definition of the “500” zone. Exceptional results include 23.7 meters (m) averaging 17.52 g/t gold with a horizontal true width of 10.4m. Mineralized intervals are inclusive of several bonanza-grade intercepts. This hole is consistent with Lion One’s geological model of a robust Alkalic gold system with increasing gold grade at depth.
Highlights
A deep high-grade intercept of 17.52 g/t Au over 23.7m with 10.4m true width from TUDDH 608 Targeting intersection of TUG 141(20.86 g/t Au over 76.9m) and TUDDH 601(12.22 g/t Au over 54.9m) Structural interpretation for a deep high grade feeder system taking shape in Zone 500
TUDDH 608 – select high grade intercepts
From m
To m
Intercept m
Grade g/t Au
594.5
618.2
23.70
17.89
594.5
614.1
19.60
21.16
596.7
603.1
6.40
42.58
596.7
597.9
1.20
85.10
599.8
600.4
0.60
108.31
Lion One Senior Vice President Exploration Sergio Cattalani commented “By drilling at a high angle across the TUG 141 (20.86 g/t gold over 76.9m) / TUDDH 601 (12.22 g/t Au over 54.9m) high-grade zone, TUDDH 608 was able to provide valuable information on the width and continuity of this zone. The outstanding results obtained of 17.52 g/t gold over 23.7m corresponds to a horizontal true width of 10.4m, which is approximately seven times the estimated average mining width, and at a grade that is nearly twice the average grade of the existing resource. The significance of this zone and its likely contribution to the increase in overall contained ounces cannot be overstated, as the extent of this zone may be much greater than previously thought. We are currently drilling several additional holes to test the possible plunge extent estimated by oriented core structural measurements. We will continue to report additional results as they become available.”
Hole TUDDH 608 (azimuth: 089°, dip: -64°), drilled from west to east, was designed drill across the high-grade zone identified in two directions by TUG 141 and TUDDH 601 (Figures 1, 2). With the completion of TUDDH 608 we can now better understand the true horizontal width and potential volume of the bonanza-grade feeder zone. The results are outstanding with 23.7m drilled width at 17.5 g/t gold, including 19.6m of 20.7 g/t gold (Figures 3-10). The horizontal true width of the zone at the drilled location is 10.4m (Figure 1). Lion One regards the confirmation of the high-grade feeder zone initially identified by TUG 141 and TUDDH 601 as transformational in that it confirms both continuity and implies extensive volume of the mineralized feeder zone below the current resource. Mineralization in TUDDH 608 extends from 594.5m to 618.2m (Table 1).
Lion One CEO Walter Berukoff commented “We look forward to further definition of the “Jewel box” dilatational feeder zone that we have been drilling out beneath the existing resource starting from surface at Tuvatu. This hole provides outstanding results for us as it continues to lend credence and proof-of-concept to the thesis of a deeper, very high-grade, feeder-style zone at depth. We continue to add enormous value to the mine as well as the critical exploration upside with the drill bit. We are defining what looks to be the next major high-grade discovery and world-class gold deposit right here in Fiji. We look forward to further results in very near future.”
Assay Data for TUDDH 608
Drill Hole
Easting
Northing
Elevation
Azimuth
Dip
Length (m)
TUDDH 608
1876280.4
3920472.4
286.5
89
-64
678.1
Drill Hole
From (m)
To (m)
Interval (m)
Au (g/t)
TUDDH 608
38.0
38.6
0.6
1.04
263.8
264.4
0.6
0.79
285.1
285.7
0.6
0.69
493.6
493.9
0.3
3.08
503.2
510.0
6.8
2.45
Including
506.7
507.3
0.6
10.50
511.2
515.7
4.5
1.45
517.8
518.1
0.3
1.09
519.3
523.2
3.9
1.50
557.1
557.7
0.6
9.09
Including
557.1
557.4
0.3
11.65
Including
557.4
557.7
0.3
6.52
559.2
559.8
0.6
3.03
571.4
572.6
1.2
9.42
Including
571.4
572.0
0.6
17.03
Including
572.0
572.6
0.6
1.80
576.5
577.4
0.9
0.51
594.5
618.2
23.7
17.89
Which Includes
594.5
614.1
19.6
21.16
Also Including
596.7
603.1
6.4
42.58
Including
596.7
597.9
1.2
85.10
Including
597.9
598.6
0.7
9.42
Including
598.6
598.9
0.3
8.38
Including
598.9
599.2
0.3
11.44
Including
599.2
599.5
0.3
6.98
Including
599.5
599.8
0.3
36.39
Including
599.8
600.4
0.6
108.31
Including
600.4
600.7
0.3
21.69
Including
600.7
601.7
1.0
13.54
Including
601.7
602.2
0.5
23.21
Including
602.5
603.1
0.6
80.02
and
603.1
603.7
0.6
7.05
Including
603.7
604.0
0.3
11.98
Including
606.0
606.6
0.6
54.54
Including
606.6
607.2
0.6
12.00
Including
607.2
607.8
0.6
8.30
Including
607.8
608.4
0.6
29.57
Including
609.3
609.6
0.3
24.31
Including
610.2
610.8
0.6
10.85
Including
610.8
611.1
0.3
7.54
Including
611.4
612.1
0.7
45.02
Including
612.1
612.9
0.8
13.31
and
612.9
613.8
0.9
0.54
and
613.8
614.1
0.3
1.87
and
614.1
616.1
2.0
<0.5
616.1
618.2
2.1
4.26
Including
616.1
616.7
0.6
11.72
Including
616.7
617.5
0.8
1.87
Including
617.5
618.2
0.7
0.59
670.2
670.5
0.3
1.05
Figure 1: Tuvatu Alkalic gold mine. Blue shapes are areas of known mineralization that define the current resource. Note the trifecta of holes that delineate, in 3 different orientations, the 10.4m true width of the “Jewel Box” high-grade zone (Brown =>10 g/t Au) which occurs within the larger high-grade 500 feeder zone
Figure 2: Closer view of the lower portion of Figure 1, depicting theorientation of selected drill holes that define a coherent high-grade portion within the high-grade 500 Zone mineralization entirely below the current resource.
In accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43- 101”), Sergio Cattalani, P.Geo, Senior Vice President Exploration, is the Qualified Person for the Company and has reviewed and is responsible for the technical and scientific content of this news release.
QAQC Procedures
Lion One adheres to rigorous QAQC procedures above and beyond basic regulatory guidelines in conducting its sampling, drilling, testing, and analyses. The Company utilizes its own fleet of diamond drill rigs, using PQ, HQ and NQ sized drill core rods. Drill core is logged and split by Lion One personnel on site. Samples are delivered to and analyzed at the Company’s geochemical and metallurgical laboratory in Fiji. Duplicates of all samples with grades above 0.5 g/t Au are both re-assayed at Lion One’s lab and delivered to ALS Global Laboratories in Australia (ALS) for check assay determinations. All samples for all high-grade intercepts are sent to ALS for check assays. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10.00 g/t Au are then re-analyzed by gravimetric method. For samples that return greater than 0.50 g/t Au, repeat fire assay runs are carried out and repeated until a result is obtained that is within 10% of the original fire assay run. Lion One’s laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples are sent to ALS labs in Townsville QLD and are analyzed by the same methods (Au-AA26, and Au-GRA22 where applicable). ALS also analyses 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES (method ME-ICP61).
About Lion One Metals Limited
Lion One’s flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One’s CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.
On behalf of the Board of Directors of Lion One Metals Limited
“Walter Berukoff“ Chairman and CEO
For further information Contact Investor Relations
Neither the TSX Venture Exchange nor its Regulation Service Provider accepts responsibility for the adequacy or accuracy of this release.
This press release may contain statements that may be deemed to be “forward-looking statements” within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “proposed”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Limited’s current beliefs and is based on information currently available to Lion One Metals Limited and on assumptions Lion One Metals Limited believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Limited or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Limited, general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Limited has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Limited does not undertake to update any forward-looking information, except in accordance with applicable securities laws.
VANCOUVER, BC / ACCESSWIRE / November 4, 2022 / Stillwater Critical Minerals (formerly Group Ten Metals) (TSXV:PGE)(OTCQB:PGEZF)(FSE:5D32) (the “Company” or “SWCM”) announces that the Company has applied for TSX Venture Exchange approval to extend the expiry date on certain warrants that were due to expire November 21, 2022 (the “Warrants”). Per the application, 5,233,824 Warrants that were originally issued as part of a financing completed in November 2019 (see news release dated November 21, 2019) will be extended to a new expiration date of May 21, 2023. Each Warrant entitles the holder to acquire one common share at an exercise price of CDN$ 0.25.
About Stillwater Critical Minerals Corp.
Stillwater Critical Minerals (TSX.V: PGE | OTCQB: PGEZF) is a mineral exploration company focused on its flagship Stillwater West PGE-Ni-Cu-Co + Au project in the iconic and famously productive Stillwater mining district in Montana, USA. With the recent addition of two renowned Bushveld and Platreef geologists to the team, the Company is well positioned to advance the next phase of large-scale critical mineral supply from this world-class American district, building on past production of nickel, copper, and chromium, and the ongoing production of platinum group and other metals by neighboring Sibanye-Stillwater. The Platreef-style nickel and copper sulphide deposits at Stillwater West contain a compelling suite of critical minerals and are open for expansion along trend and at depth, with an updated NI 43-101 mineral resource update now in progress based on a 14-hole expansion drilling campaign.
Stillwater Critical Minerals also holds the high-grade Drayton-Black Lake Gold project adjacent to Treasury Metals’ development-stage Goliath Gold Complex in northwest Ontario. Drayton-Black Lake is currently under an earn-in agreement with an option to joint venture whereby Heritage Mining may earn up to a 90% interest in the project by completing payments and work on the project. The Company also holds the Kluane PGE-Ni-Cu-Co project on trend with Nickel Creek Platinum‘s Wellgreen deposit in Canada‘s Yukon Territory.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
A CRITICAL MINERALS EXPLORATION COMPANY Rover Metals (“Rover”) is a publicly traded Canadian junior mining company specialized in North American critical minerals and precious metal development-stage mining projects. Rover’s twelve month forward-looking plan is to advance exploration at our Nevada Claystone Lithium project and at our Northern Canada Zinc-Copper project, located near the city of Yellowknife, NT, Canada. The Indian Mountain Lake Project is the Company’s first district scale land package, representing approximately 30,000 acres of greenstone belt.
Rover Metals also has 100% ownership of several gold mining assets located near to the city of Yellowknife, NT. Rover obtained a public listing for its securities on the TSX Venture Exchange as a Tier II Mining Issuer on June 26, 2018.
Rover Metals trades under the symbol “ROVR” on the TSXV. Rover also obtained a public co-listing of its securities on the OTCQB on January 17, 2019 (OTCQB: ROVMD), and on the Frankfurt Stock Exchange on February 1, 2021 (FRA: 4XO).
The Company is run by an experienced management team and board that are career mining executives. Our management team and board have a proven history financing the development of mining projects, taking them into production, and re-selling them.
The Best Video on Why and When to Buy and Sell Physical Precious Metals:
Proven and Probable Where we deliver Mining Insights & Bullion Sales. I’m a licensed broker for Miles Franklin Precious Metals Investments (https://www.milesfranklin.com/contact/) Where we provide unlimited options to expand your precious metals portfolio, from physical delivery, offshore depositories, and precious metals IRA’s. Call me directly at (855) 505-1900 or you may email maurice@milesfranklin.com.
Proven and Probable provides insights on mining companies, junior miners, gold mining stocks, uranium, silver, platinum, zinc & copper mining stocks, silver and gold bullion in Canada, the US, Australia, and beyond.
TORONTO, ON / ACCESSWIRE / November 3, 2022 / (CSE:ROO)(OTC PINK:JNCCF)(Frankfurt:5VHA) – RooGold Inc. (“RooGold” or the “Issuer“).
Further to its September 30, 2021 news release, RooGold is pleased to announce, with Australian regulatory clearance obtained, the final closing of the definitive Share Exchange Agreement with Aussie Precious Metals Corp. (“APMC“) in which RooGold has effectively acquired a 100% interest in APMC’s Trilby and Lorne properties (“Properties“) in New South Wales (NSW) Australia. The Issuer issued four million (4,000,000) common shares (the “Purchase Shares“) to the shareholders (“Shareholders“) of APMC in exchange for all of the issued and outstanding shares of APMC with the Properties held in APMC’s wholly owned Australian subsidiary. The Purchase Shares have now been released from escrow subject to voluntary undertakings as to when such Purchase Shares may be traded.
About RooGold Inc. ROOGOLD is a Canadian based junior venture mineral exploration issuer which is uniquely positioned to be a dominant player in New South Wales, Australia, through a growth strategy focused on the consolidation and exploration of high potential, mineralized precious metals properties in this prolific region of Australia. Through its announced acquisitions of Southern Precious Metals Ltd., RooGold Ltd. and Aussie Precious Metals Corp. properties, RooGold commands a portfolio of 13 high-grade potential gold (9) and silver (4) concessions covering 1,380 km2 which have 137 historic mines and prospects.
For further information please contact: Ryan Bilodeau (416) 910-1440 info@roogoldinc.com
Forward-Looking Statements
This press release may contain forward-looking statements within the meaning of applicable securities law. Forward-looking statements are frequently characterized by words such as “plan”, “expect”, “project”, “intend”, “believe”, “anticipate”, “estimate” and other similar words, or statements that certain events or conditions “may” or “will” occur.
Although the Issuer believes that the expectations reflected in applicable forward-looking statements are reasonable, therecan be no assurance that such expectations will prove to be correct. Such forward-looking statements are subjectto risks and uncertainties that may cause actual results, performance or developments to differ materially from those contained in such statements.
NEITHER THE CANADIAN SECURITIES EXCHANGE NOR ITS REGULATION SERVICES PROVIDER ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
Vancouver, British Columbia–(Newsfile Corp. – November 2, 2022) – Goldshore Resources Inc. (TSXV: GSHR) (OTCQB: GSHRF) (FSE: 8X00) (“Goldshore” or the “Company“), is pleased to announce assay results from its ongoing 100,000-meter drill program at the Moss Lake Project in Northwest Ontario, Canada (the “Moss Lake Gold Project“).
Highlights:
Results for eight holes, drilled to both expand and infill historic but poorly surveyed drill sections in the Main Zone, have confirmed higher-grade gold mineralization within a large volume of well mineralized diorite with best intercepts of:
Results for four holes, drilled to evaluate the under-drilled Southwest Zone, have confirmed narrow higher-grade gold mineralized structures with best intercepts of:
President and CEO Brett Richards stated: “Throughout our entire drilling campaign from 2021 to now, we have consistently and repeatedly delivered promising drill results, indicating not only the size and scale potential of the Moss Lake Project, but also the quality of the higher-grade areas of the deposit. As we illustrated at the end of H1 2022, our focus turned from identifying and drilling the size of the global resource; to identifying the high(er) grade sections contained within the historical resource (and stepped out from the historical resource), and focusing on building a much smaller open pit project PEA around this. The results from this change in focus are evident in press releases in H1 2022 and Q3 2022, and continue with the results highlighted today. To that end, we are expediting our independent mineral resource estimate (“MRE“) on the high(er) grade sections within the historical resource, and look to have the results of this MRE presented to the market by the end of 2022, versus the end of Q1 2023, as previously guided. This will also lead to the Company accelerating a preliminary economic assessment (“PEA“) on a smaller, high(er) grade resource, but much more manageable project in terms of CapEx and project timeline, versus a large-scale project PEA on an updated larger resource similar to the historic resource. The target delivery to the market of the economic results of the PEA is slated for the end of Q1 2023, under current market conditions and circumstances, versus the end of Q2 2023, as previously guided.”
Technical Overview
Figure 1 shows the better intercepts in plain view and Figure 2 is a typical section through hole MMD-22-057.
Figure 1: Drill plan showing best of several +1 g/t Au intercepts relative to implicit modelled grade shells
Over the last month, results have been received for eighteen holes, including:
Eight holes that have infilled areas of the Main Zone that are between sections drilled by historic holes with collar survey problems. They will replace the low-confidence historic holes in the upcoming resource model update.
Four holes drilled to evaluate the under-drilled Southwest Zone.
Five holes testing the margins of the main +1 g/t Au zones that provide valuable geological information in these marginal areas.
As with the historic holes, the Main and Southwest Zone holes intersected several broad zones of low-grade mineralization within the altered diorite intrusion host. Examples include 0.98 g/t Au over 50.9m from 51m and 0.32 g/t Au over 122m from 473m depth in MMD-22-036; 0.48 g/t Au over 88m from 388m and 0.53 g/t Au over 33m from 279m depth in MMD-22-042; 0.46 g/t Au over 133m from 443m depth and 0.35 g/t Au over 29.25m from 316.85m depth in MMD-22-048; 0.70 g/t Au over 126m from 335m depth and 0.89 g/t Au over 60.6m from 120.4m depth in MMD-22-053; 0.80 g/t Au over 25.35m from 563.65m depth in MMD-22-055; 0.64 g/t Au over 44m from 168m depth and 0.63 g/t Au over 33.65m from 237.35m depth in MMD-22-064; 0.47 g/t Au over 38.1m from 615.45m depth in MMD-22-066; and 0.46 g/t Au over 27.65m from 366.25m depth in MMD-22-078.
All these low-grade zones occur as envelopes to higher-grade structures that form a three-dimensional, anastomosing shear network that has developed in response to strain on the altered diorite intrusion. Results include the broad zones of +1 g/t Au mineralization shown in the highlights (e.g., 1.34 g/t Au over 90.95m from 254.05m depth in MMD-22-057) and several narrow high-grade intervals, including better intercepts of 39.3 g/t Au over 0.7m from 90.45m depth in MMD-22-036; 47.4 g/t Au over 0.5m from 420.25m depth in MMD-22-052; 11.4 g/t Au over 2.35m from 549m depth in MMD-22-056; 26.7 g/t Au over 1m from 287m depth in MMD-22-057; and 231 g/t Au over 0.35m from 182.75m depth in MMD-22-064.
Four holes were drilled into the Link zone and potential overlap between the QES zone and Moss Main zone to properly define the boundaries of each zone and to better understand the behavior of the southern edge of the altered diorite package. These dominantly drilled through the lesser altered and deformed porphyritic diorite phase containing several narrow lenses of low-grade mineralization as indicated by the historic drill results.
Geological modelling of the altered diorite host rock and anastomosing shear network at Moss Lake has progressed faster than anticipated and is now complete. As a result, the Company has embarked on an independent resource modelling exercise and has engaged international consulting group, CSA Global (an ERM group company) to complete this work. This will lead to a new Mineral Resource estimate that will be reported following National Instrument 43-101 standards for disclosure. This new estimate will be published before the end of 2022.
Pete Flindell, VP Exploration for Goldshore, said, “These drill results continue the vein of local high grade gold mineralization that bulks out to produce 50- to 200-meter-wide zones of +1 g/t Au gold mineralization within a “sea” of low-grade mineralization. This style of mineralization is capable of producing large, low-grade gold resources with a significant volume of higher-grade mineralization. We anticipate that this should, with the selection of the appropriate gold price for the constraining Whittle shell, allow the reporting of a smaller, higher-grade resource at the Moss Lake Project.”
Table 1 shows the significant intercepts and Table 2 shows the drill hole locations.
Table 1: Significant downhole gold intercepts
ZONE
HOLE ID
FROM
TO
LENGTH (m)
TRUE WIDTH (m)
CUT GRADE (g/t Au)
UNCUT GRADE (g/t Au)
MAIN
MMD-22-036
22.00
35.80
13.80
4.4
0.62
0.62
51.00
101.90
50.90
16.6
0.98
1.11
including
62.50
67.35
4.85
1.6
1.39
1.39
and
84.50
94.00
9.50
3.1
3.70
4.38
238.50
256.30
17.80
6.1
0.47
0.47
276.40
286.20
9.80
3.4
0.46
0.46
including
279.00
281.85
2.85
1.0
1.01
1.01
419.10
446.50
27.40
10.0
0.36
0.36
including
420.00
422.00
2.00
0.7
1.84
1.84
473.00
595.00
122.00
47.4
0.32
0.32
613.45
619.95
6.50
2.6
0.36
0.36
631.00
634.75
3.75
1.5
0.47
0.47
671.45
686.00
14.55
5.8
0.35
0.35
MAIN
MMD-22-048
190.00
192.40
2.40
1.5
0.78
0.78
220.00
227.00
7.00
4.3
0.54
0.54
277.60
285.00
7.40
4.5
0.34
0.34
316.85
346.10
29.25
18.0
0.35
0.35
373.55
400.00
26.45
16.3
1.05
1.05
including
388.00
399.15
11.15
6.9
1.60
1.60
443.00
576.00
133.00
84.2
0.46
0.46
including
446.00
458.20
12.20
7.6
1.08
1.08
and
467.90
472.00
4.10
2.6
1.37
1.37
and
521.00
538.35
17.35
11.1
1.03
1.03
602.00
614.00
12.00
7.8
0.31
0.31
620.00
635.40
15.40
10.0
0.56
0.56
MAIN
MMD-22-052
104.35
111.00
6.65
3.4
0.46
0.46
138.00
140.00
2.00
1.1
0.31
0.31
274.25
277.30
3.05
1.7
0.44
0.44
311.15
313.35
2.20
1.3
0.35
0.35
MAIN
MMD-22-053
18.00
27.00
9.00
4.9
0.39
0.39
33.00
38.00
5.00
2.7
0.42
0.42
49.35
66.30
16.95
9.1
0.37
0.37
77.00
81.45
4.45
2.4
1.58
1.58
including
77.75
81.45
3.70
2.0
1.81
1.81
92.20
100.20
8.00
4.2
1.63
1.63
including
92.20
98.00
5.80
3.1
2.10
2.10
120.40
181.00
60.60
32.1
0.89
0.89
including
121.00
139.00
18.00
9.5
1.80
1.80
and
158.00
167.00
9.00
4.8
1.72
1.72
201.00
205.00
4.00
2.1
0.53
0.53
222.00
225.00
3.00
1.6
5.24
5.24
248.00
263.00
15.00
7.8
0.38
0.38
285.00
304.00
19.00
9.9
0.35
0.35
310.60
313.00
2.40
1.3
0.35
0.35
335.00
461.00
126.00
65.6
0.70
0.70
including
341.00
344.00
3.00
1.6
1.14
1.14
and
355.60
399.25
43.65
22.7
1.30
1.30
and
444.00
450.00
6.00
3.1
1.63
1.63
487.75
490.00
2.25
1.2
0.57
0.57
MAIN
MMD-22-054
383.00
389.60
6.60
2.1
0.42
0.42
429.40
434.30
4.90
1.6
0.51
0.51
531.05
539.00
7.95
2.6
0.31
0.31
MAIN
MMD-22-055
168.00
182.85
14.85
8.4
0.30
0.30
212.00
215.00
3.00
1.7
0.73
0.73
360.60
374.90
14.30
7.8
1.07
1.07
including
364.00
374.90
10.90
5.9
1.28
1.28
525.40
528.25
2.85
1.6
1.55
1.55
563.65
589.00
25.35
14.2
0.80
0.80
including
581.05
583.80
2.75
1.6
3.08
3.08
600.00
612.10
12.10
6.9
0.36
0.36
MAIN
MMD-22-056
181.00
185.60
4.60
2.1
0.52
0.52
221.00
225.00
4.00
1.8
0.38
0.38
267.00
270.35
3.35
1.5
0.34
0.34
287.85
296.00
8.15
3.7
0.63
0.63
336.35
342.25
5.90
2.6
0.62
0.62
353.70
358.45
4.75
2.1
0.35
0.35
379.40
387.65
8.25
3.6
1.20
1.20
441.00
461.50
20.50
8.9
0.49
0.49
502.00
561.90
59.90
25.5
1.02
1.02
including
509.00
511.00
2.00
0.9
3.16
3.16
and
542.00
551.35
9.35
4.0
4.78
4.78
593.30
598.00
4.70
2.0
0.38
0.38
MAIN
MMD-22-057
18.10
26.25
8.15
2.8
2.66
2.66
40.90
43.10
2.20
0.8
0.46
0.46
254.05
345.00
90.95
34.2
1.34
1.34
including
260.40
272.40
12.00
4.5
2.42
2.42
and
283.55
299.95
16.40
6.2
4.02
4.02
and
312.00
328.75
16.75
6.3
1.04
1.04
366.00
371.25
5.25
2.0
1.11
1.11
382.00
385.00
3.00
1.2
0.70
0.70
457.50
461.00
3.50
1.4
0.36
0.36
552.40
559.00
6.60
2.7
0.36
0.36
570.00
583.00
13.00
5.5
0.34
0.34
594.00
599.00
5.00
2.1
0.34
0.34
SW
MMD-22-042
36.95
41.00
4.05
2.7
0.87
0.87
106.65
110.75
4.10
3.0
0.49
0.49
209.00
212.05
3.05
2.5
0.50
0.50
239.00
241.00
2.00
1.7
0.43
0.43
256.55
266.00
9.45
8.1
0.97
0.97
including
261.95
266.00
4.05
3.5
1.77
1.77
279.00
312.00
33.00
29.0
0.53
0.53
330.00
341.00
11.00
10.0
0.94
0.94
366.00
377.00
11.00
10.2
0.74
0.74
including
370.00
377.00
7.00
6.5
1.08
1.08
388.00
476.00
88.00
84.1
0.48
0.48
including
388.00
396.25
8.25
7.7
2.26
2.26
SW
MMD-22-050
162.00
168.35
6.35
5.0
0.68
0.68
194.40
207.10
12.70
10.4
0.48
0.48
300.15
312.90
12.75
11.4
0.82
0.82
including
303.00
311.00
8.00
7.1
1.10
1.10
SW
MMD-22-064
28.00
31.85
3.85
2.5
1.42
1.42
42.45
55.10
12.65
8.2
0.92
0.92
168.00
212.00
44.00
29.9
0.64
2.24
including
182.00
185.50
3.50
2.4
3.64
23.70
237.35
271.00
33.65
23.2
0.63
0.63
including
250.25
252.40
2.15
1.5
1.59
1.59
SW
MMD-22-066
451.00
453.25
2.25
1.7
0.58
0.58
559.35
572.00
12.65
9.7
0.31
0.31
586.00
589.00
3.00
2.3
0.39
0.39
599.00
609.55
10.55
8.2
0.36
0.36
615.45
653.55
38.10
30.1
0.47
0.47
including
625.00
627.00
2.00
1.6
1.08
1.08
LINK
MMD-22-074
603.85
607.90
4.05
3.1
0.66
0.66
LINK
MMD-22-078
62.55
67.90
5.35
3.6
0.40
0.40
366.25
393.90
27.65
20.1
0.46
0.46
422.55
425.50
2.95
2.2
0.31
0.31
447.80
455.40
7.60
5.7
0.64
0.64
including
452.20
455.40
3.20
2.4
1.08
1.08
492.25
498.40
6.15
4.6
0.31
0.31
LINK
MMD-22-081
83.00
91.00
8.00
5.6
0.45
0.45
253.20
257.65
4.45
3.3
0.64
0.64
286.55
295.00
8.45
6.3
0.51
0.51
335.00
353.95
18.95
14.4
0.30
0.30
LINK
MMD-22-082
122.00
131.00
9.00
6.5
0.74
0.74
including
122.00
124.00
2.00
1.5
1.22
1.22
147.00
149.00
2.00
1.5
0.51
0.51
167.00
178.00
11.00
8.2
0.90
0.90
including
172.00
175.00
3.00
2.2
1.34
1.34
Intersections calculated above a 0.3 g/t Au cut off with a top cut of 30 g/t Au and a maximum internal waste interval of 10 metres. Bordered intervals are intersections calculated above a 1.0 g/t Au cut off. Intervals in bold are those with a grade thickness factor exceeding 20 gram x metres / tonne gold. True widths are approximate and assume a subvertical body.
Table 2: Location of drill holes in this press release
ZONE
HOLE
EAST
NORTH
RL
AZIMUTH
DIP
EOH
MAIN
MMD-22-036
668,868
5,379,279
441
154°
-71°
690.00
SW
MMD-22-042
668,520
5,378,529
436
158°
-50°
516.00
MAIN
MMD-22-048
668,705
5,379,209
435
155°
-52°
690.00
SW
MMD-22-050
668,517
5,378,529
437
110°
-50°
464.00
MAIN
MMD-22-052
668,994
5,379,542
438
155°
-60°
597.30
MAIN
MMD-22-053
669,014
5,379,307
427
154°
-61°
605.85
MAIN
MMD-22-054
668,705
5,379,209
435
150°
-70°
576.00
MAIN
MMD-22-055
668,721
5,379,279
443
154°
-59°
618.00
MAIN
MMD-22-056
668,801
5,379,340
438
151°
-61°
600.00
MAIN
MMD-22-057
668,887
5,379,368
437
154°
-70°
603.00
SW
MMD-22-064
668,481
5,378,460
439
109°
-51°
407.15
SW
MMD-22-066
669,077
5,378,242
432
290°
-50°
654.30
LINK
MMD-22-074
669,241
5,378,339
430
335°
-51°
660.85
LINK
MMD-22-077
669,659
5,379,054
432
335°
-60°
12.00
LINK
MMD-22-078
669,659
5,379,055
432
337°
-50°
603.00
LINK
MMD-22-079
669,573
5,379,011
437
336°
-50°
333.00
LINK
MMD-22-081
669,469
5,378,982
428
334°
-48°
375.00
LINK
MMD-22-082
669,248
5,378,768
437
335°
-46°
347.85
Analytical and QA/QC Procedures
All samples were sent to ALS Geochemistry in Thunder Bay for preparation and analysis was performed in the ALS Vancouver analytical facility. ALS is accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025. Samples were analyzed for gold via fire assay with an AA finish (“Au-AA23”) and 48 pathfinder elements via ICP-MS after four-acid digestion (“ME-MS61”). Samples that assayed over 10 ppm Au were re-run via fire assay with a gravimetric finish (“Au-GRA21”).
In addition to ALS quality assurance / quality control (“QA/QC”) protocols, Goldshore has implemented a quality control program for all samples collected through the drilling program. The quality control program was designed by a qualified and independent third party, with a focus on the quality of analytical results for gold. Analytical results are received, imported to our secure on-line database and evaluated to meet our established guidelines to ensure that all sample batches pass industry best practice for analytical quality control. Certified reference materials are considered acceptable if values returned are within three standard deviations of the certified value reported by the manufacture of the material. In addition to the certified reference material, certified blank material is included in the sample stream to monitor contamination during sample preparation. Blank material results are assessed based on the returned gold result being less than ten times the quoted lower detection limit of the analytical method. The results of the on-going analytical quality control program are evaluated and reported to Goldshore by Orix Geoscience Inc.
About Goldshore
Goldshore is an emerging junior gold development company, and owns the Moss Lake Gold Project located in Ontario. Wesdome is currently a large shareholder of Goldshore with an approximate 27% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Lake Gold Project through the next stages of exploration and development.
About the Moss Lake Gold Project
The Moss Lake Gold Project is located approximately 100 km west of the city of Thunder Bay, Ontario. It is accessed via Highway 11 which passes within 1 km of the property boundary to the north. The Moss Lake Gold Project covers 14,292 hectares and consists of 282 unpatented and patented mining claims.
The Moss Lake Gold Project hosts a number of gold and base metal rich deposits including the Moss Lake Deposit, the East Coldstream Deposit (Table 3), the historically producing North Coldstream Mine (Table 4), and the Hamlin Zone, all of which occur over a mineralized trend exceeding 20 km in length. A historical preliminary economic assessment (the “Moss Lake Historical Estimate“) was completed on the Moss Lake Gold Project in 2013 and published by Moss Lake Gold Mines Ltd. (“Moss Lake Gold Mines“)1,3. A historical mineral resource estimate (the “East Coldstream Historical Estimate“) was completed on the East Coldstream Deposit in 2011 by Foundation Resources Inc.2,3 In addition to these zones, the Moss Lake Gold Project also hosts a number of under-explored mineral occurrences which are reported to exist both at surface and in historically drilled holes. The Moss Lake Deposit is a shear-hosted disseminated-style gold deposit which outcrops at surface. It has been drilled over a 2.5 km length and to depths of 300 m with 376 holes completed between 1983 and 2017. The last drilling program conducted in 2016 and 2017 by Wesdome Gold Mines Ltd. (“Wesdome“), which consisted of widely spaced holes along the strike extension of the deposit was successful in expanding the mineralized footprint and hydrothermal system 1.6 km to the northeast. Additionally, the deposit remains largely open to depth. In 2017, Wesdome completed an induced polarization survey which traced the potential extensions of pyrite mineralization associated with the Moss Lake Deposit over a total strike length of 8 km and spanning the entire extent of the survey grids.
The East Coldstream Deposit is a shear-hosted disseminated-style gold deposit which locally outcrops at surface. It has been drilled over a 1.3 km length and to depths of 200 m with 138 holes completed between 1988 and 2017. The deposit remains largely open at depth and may have the potential for expansion along strike. Historic drill hole highlights from the East Coldstream Deposit include 4.86 g/t Au over 27.3 m in C-10-15.
The historically producing North Coldstream Mine is reported to have produced significant amounts of copper, gold and silver4 from mineralization with potential iron-oxide-copper-gold deposit style affinity. The exploration potential immediately surrounding the historic mining area is not currently well understood and historic data compilation is required.
The Hamlin Zone is a significant occurrence of copper and gold mineralization, and also of potential iron-oxide-copper-gold deposit style affinity. Between 2008 and 2011, Glencore tested Hamlin with 24 drill holes which successfully outlined a broad and intermittently mineralized zone over a strike length of 900 m. Historic drill hole highlights from the Hamlin Zone include 0.9 g/t Au and 0.35% Cu over 150.7 m in HAM-11-75.
The Moss Lake, East Coldstream and North Coldstream deposits sit on a mineral trend marked by a regionally significant deformation zone locally referred to as the Wawiag Fault Zone in the area of the Moss Lake Deposit. This deformation zone occurs over a length of approximately 20 km on the Moss Lake Gold Project and there is an area spanning approximately 7 km between the Moss Lake and East Coldstream deposits that is significantly underexplored.
Table 3: Historical Mineral Resources1,2,3
INDICATED
INFERRED
Deposit
Tonnes
Au g/t
Au oz
Tonnes
Au g/t
Au oz
Moss Lake Historical Estimate
Open Pit Potential
39,795,000
1.1
1,377,300
48,904,000
1.0
1,616,300
Underground Potential
–
–
–
1,461,100
2.9
135,400
Moss Lake Total
39,795,000
1.1
1,377,300
50,364,000
1.1
1,751,600
East Coldstream Historical Estimate
East Coldstream Total
3,516,700
0.85
96,400
30,533,000
0.78
763,276
Combined Total
43,311,700
1.08
1,473,700
80,897,000
0.98
2,514,876
Notes:
(1) Source: Poirier, S., Patrick, G.A., Richard, P.L., and Palich, J. “Technical Report and Preliminary Economic Assessment for the Moss Lake Project”, prepared for Moss Lake Gold Mines Ltd. The qualified persons for the Moss Lake Historical Estimate are Pierre-Luc Richard, MSc, PGeo (InnovExplo Inc), and Carl Pelletier, BSc, PGeo (InnovExplo Inc), and the effective date of the Moss Lake Historical Estimate is February 8, 2013. In-Pit results are presented undiluted and in situ, within Whittle-optimized pit shells. Underground results are presented undiluted and in situ, outside Whittle-optimized pit shells. The Moss Lake Historical Estimate includes 18 gold-bearing zones and 1 envelope containing isolated gold intercepts. Whittle parameters: mining cost = C$2.28; pit slope angle = 50.0 degrees; production cost = C$9.55; mining Dilution = 5%; mining recovery = 95%; processing recovery = 80% to 85%; gold price = C$1,500. In-Pit and Underground resources were compiled at cut-off grades from 0.3 to 5.0 g/t Au (for sensitivity characterization). A cut-off grade of 0.5 g/t Au was selected as the official in-pit cut-off grade and a cut-off grade of 2.0 g/t Au was selected as the official underground cut-off grade. The Moss Lake Historical Estimate is based on 352 diamond drill holes (90,978 m) drilled from 1983 and 2008. A fixed density of 2.78 g/cm3 was used. A minimum true thickness of 5.0 m was applied, using the grade of the adjacent material when assayed or a value of zero when not assayed. Capping was established at 35 g/t Au, supported by statistical analysis and the high grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Gems version 6.4. Based on geostatistics, the ellipse range for interpolation was 75m x 67.5m x 40m. The Indicated category is defined by combining the blocks within the two main zones and various statistical criteria, such as average distance to composites, distance to closest composite, quantity of drill holes within the search area. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.
(2) Source: McCracken, T. “Technical Report and Resource Estimate on the Osmani Gold Deposit, Coldstream Property, Northwestern Ontario”, prepared for Foundation Resources Inc. and Alto Ventures Ltd. The East Coldstream Historical Estimate is based on a 0.4 g/t Au cut-off grade. The qualified persons for the East Coldstream Historical Estimate are Todd McCracken, P.Geo. (Tetratech Wardrop), and Jeff Wilson, Ph.D., P.Geo. (Tetratech Wardrop), and the effective date of the East Coldstream Historical Estimate is December 12, 2011. Resources are presented unconstrained, undiluted and in situ. The East Coldstream Historical Estimate includes 2 gold-bearing zones. A cut-off grade of 0.4 g/t Au was selected as the official resource cut-off grade. The East Coldstream Historical Estimate is based on 116 diamond drill holes drilled from 1986 to 2011. A fixed density of 2.78 g/cm3 was used. Capping was established at 5.89 g/t Au and 5.70 g/t Au for domains EC-1 and EC-2, respectively. This is supported by statistical analysis and the high grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Datamine Studio 3 version 3.20.5321.0. Resource categorization is based on spatial continuity based from the variography of the assays within the drillholes. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.
(3) The reader is cautioned that the Moss Lake Historical Estimate East and the East Coldstream Historical Estimate (the “Historical Estimates“) are considered historical in nature and as such is based on prior data and reports prepared by previous property owners. The reader is cautioned not to treat them, or any part of them, as current mineral resources or reserves. The Company has determined these historical resources are reliable, and relevant to be included here in that they demonstrate simply the mineral potential of the Moss Lake Gold Project. A qualified person has not done sufficient work to classify the Historical Estimates as current resources and Goldshore is not treating the Historical Estimates as current resources. Significant data compilation, re-drilling, re-sampling and data verification may be required by a qualified person before the Historical Estimates can be classified as a current resource. There can be no assurance that any of the historical mineral resources, in whole or in part, will ever become economically viable. In addition, mineral resources are not mineral reserves and do not have demonstrated economic viability. Even if classified as a current resource, there is no certainty as to whether further exploration will result in any inferred mineral resources being upgraded to an indicated or measured mineral resource category. The Historical Estimates relating to inferred mineral resources were calculated using prior mining industry standard definitions and practices for estimating mineral resource and mineral reserves. Such prior definitions and practices were utilized prior to the implementation of the current standards of the Canadian Institute of Mining for mineral resource estimation, and have a lower level of confidence.
Table 4: Reported Historical Production from the North Coldstream Deposit4
Deposit
Tonnes
Cu %
Au g/t
Ag
Cu lbs
Au oz
Ag oz
Historical Production
2,700,0000
1.89
0.56
5.59
102,000,000
44,000
440,000
Note:
(4) Source: Schlanka, R., 1969. Copper, Nickel, Lead and Zinc Deposits of Ontario, Mineral Resources Circular No. 12, Ontario Geological Survey, pp. 314-316.
Peter Flindell, P.Geo., MAusIMM, MAIG, Vice President – Exploration of the Company, a qualified person under NI 43-101 has approved the scientific and technical information contained in this news release.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.
For More Information – Please Contact:
Brett A. Richards President, Chief Executive Officer and Director Goldshore Resources Inc.
This news release contains statements that constitute “forward-looking statements.” Such forward looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur.
Forward-looking statements in this news release include, among others, statements relating to expectations regarding the exploration and development of the Moss Lake Gold Project, release of the MRE, release of a PEA, and other statements that are not historical facts. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors and risks include, among others: the Company may require additional financing from time to time in order to continue its operations which may not be available when needed or on acceptable terms and conditions acceptable; compliance with extensive government regulation; domestic and foreign laws and regulations could adversely affect the Company’s business and results of operations; the stock markets have experienced volatility that often has been unrelated to the performance of companies and these fluctuations may adversely affect the price of the Company’s securities, regardless of its operating performance; and the impact of COVID-19.
The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. The Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.
This news release does not constitute an offer to sell, or a solicitation of an offer to buy, any securities in the United States. The securities have not been and will not be registered under the United States Securities Act of 1933, as amended (the “U.S. Securities Act”) or any state securities laws and may not be offered or sold within the United States or to U.S. Persons unless registered under the U.S. Securities Act and applicable state securities laws or an exemption from such registration is available.
Highlights include 58.8m @ 2.11g/t PGM+Au, and 19.8m @ 2.68g/t PGM+Au
VANCOUVER, BC, Nov. 2, 2022 /CNW/ – Bravo Mining Corp. (TSXV: BRVO) (OTCQX: BRVMF), (“Bravo” or the “Company“) today announced that it has received assay results from an additional nine infill diamond drill holes (“DDH”) from its Luanga palladium + platinum + rhodium + gold + nickel (3PGM+Au+Ni) project (“Luanga” or “Luanga PGM+Au+Ni“), located in the Carajás Mineral Province, state of Pará, Brazil.
“Drill hole DDH22LU029, which intersected 58.8m @ 2.11g/t 3PGM+Au from 9.7m, is one of the broadest zones of 3PGM+Au mineralization intersected at Luanga to date. This drill hole also demonstrates that multiple stacked 3PGM+Au+Ni zones exist stratigraphically above (see section attached) and below the previously defined mineralized horizons. This increases our confidence in both the overall 3PGM+Au+Ni potential of Luanga, and the potential for higher-grade nickel sulphide mineralization given the 39.4m @ 0.16% Ni intersected from 29.1m,” said Luis Azevedo, Chairman and CEO of Bravo. “Furthermore, DDH22LU029 intersected a zone of nickel-rich disseminated sulphides below the main mineralized horizons (see section attached), yet still within the same orthopyroxenite host stratigraphy, again opening the possibility for new as yet unseen styles of nickel sulphide mineralization at depth.”
Highlights
The infill drilling campaign continues to advance rapidly, while results compare well with, or exceed, the intercepts in historic drill holes on nearby drill sections, in both tenor and mineralized thicknesses.
Highlights of Bravo’s recent intercepts are tabulated below, with details attached:
HOLE-ID
From(m)
To(m)
Thickness (m)
Pd(g/t)
Pt(g/t)
Rh(g/t)
Au (g/t)
PGM + Au (g/t)
Ni (% Sulphide)
TYPE
DDH22LU029
9.7
68.5
58.8
1.33
0.64
0.09
0.06
2.11
NA
Ox/FR
Including
29.1
68.5
39.4
1.12
0.48
0.07
0.07
1.74
0.16
FR
And
108.4
117.1
8.7
2.12
1.70
0.24*
0.03
4.09*
0.05
FR
And
158.5
165.0
6.5
0.33
0.14
0.01
0.01
0.50
0.43
FR
DDH22LU016
55.5
75.3
19.8
0.48
1.94
0.26
0.01
2.68
0.06
FR/LS
DDH22LU022
81.2
101.0
19.8
1.27
0.77
0.12
0.05
2.21
0.23
FR
Notes: All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole.
Given the orientation of the hole and the mineralization, the intercept is estimated to be 80% to 90% of true thickness.
Type: Ox = Oxide. LS = Low Sulphur. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization.
NA: Not Applicable as intercept is oxide or a mix of oxide and fresh rock mineralization.
* = Includes Rh >1.00g/t result. Overlimit analyses pending.
In addition, two diamond drill holes were completed on two drill sections, 50m north and south of DDH22LU047, the hole that intercepted massive sulphides (see August 16th, 2022 news release). All four step out drill holes have intersected varying amounts of semi-massive sulphides. Assay results are pending.
Downhole Electromagnetic surveys (“EM”) on these 4 drill holes, and surface fixed loop EM over the Luanga deposit, have commenced.
102 drill holes have been completed, for a total of 17,337 metres (or 68% of Phase 1 Drilling Program), including 6 twin holes and 6 metallurgical holes.
17,689 samples submitted for assay to date including 3,216 re-assay samples from historic drill core.
6 drill rigs operating onsite.
Luanga Drill Program
The Phase 1 diamond drill program continues as planned at Luanga. Six drill rigs are on site, with drilling progressing in various locations along the entire 8.1km strike length of the known Luanga mineralized envelope. To date, 102 drill holes have been completed, for a total of 17,337 metres (or 68%) of the planned 25,500 metre Phase 1 drill program.
Location of Bravo Drilling Reported in this Document (CNW Group/Bravo Mining Corp.)
Section – Showing DDH22LU029 Stacked 3PGM+Au+Ni Zones, and New Nickel Zone at Depth (CNW Group/Bravo Mining Corp.)
Complete Table of Intercepts
HOLE-ID
From(m)
To(m)
Thickness (m)
Pd(g/t)
Pt(g/t)
Rh(g/t)
Au (g/t)
3PGM + Au (g/t)
Ni (% Sulphide)
TYPE
DDH22LU016
55.5
75.3
19.8
0.48
1.94
0.26
0.01
2.68
0.06
FR/LS
DDH22LU021
8.0
13,0
5.0
0.29
0.24
<0.01
0.01
0.54
NA
Ox
DDH22LU022
81.2
101.0
19.8
1.27
0.77
0.12
0.05
2.21
0.23
FR
DDH22LU023
0.0
7.0
7.0
0.38
0.30
<0.01
0.03
0.62
NA
Ox
DDH22LU024
66.6
76.0
9.4
0.77
0.29
0.12
0.05
1.24
0.22
FR
DDH22LU025
28.5
37.5
9.0
0.85
0.55
0.15
0.02
1.57
0.17
FR
DDH22LU027
88.1
91.1
3.0
0.42
0.27
0.03
0.01
0.73
0.01
FR
And
95.6
103.6
8.0
0.26
0.09
0.05
0.01
0.40
0.01
FR/LS
DDH22LU028
0.0
24.0
24.0
0.25
0.26
<0.01
0.01
0.52
NA
FR
DDH22LU029
9.7
68.5
58.8
1.33
0.64
0.09
0.06
2.11
NA
Ox/FR
Including
29.1
68.5
39.4
1.12
0.48
0.07
0.07
1.74
0.16
FR
And
108.4
117.1
8.7
2.12
1.70
0.24*
0.03
4.09*
0.05
FR
And
158.5
165.0
6.5
0.33
0.14
0.01
0.01
0.50
0.43
FR
Notes: All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole.
Given the orientation of the hole and the mineralization, the intercept is estimated to be 80% to 90% of true thickness.
Type: Ox = Oxide. LS = Low Sulphur. FR + Fresh Rock. Recovery methods and results will differ based on the type of mineralization.
NA: Not Applicable as intercept is oxide or a mix of oxide and fresh rock mineralization.
* = Includes Rh >1.00g/t result. Overlimit analyses pending.
About Bravo Mining Corp.
Bravo is a Canada and Brazil-based mineral exploration and development company focused on advancing its Luanga 3PGM + Au + Ni Project in the world-class Carajás Mineral Province of Brazil.
The Luanga Project benefits from being in a location close to operating mines, with excellent access and proximity to existing infrastructure, including road, rail and clean and renewable hydro grid power. The project area was previously de-forested for agricultural grazing land. Bravo’s current Environmental, Social and Governance activities includes replanting trees in the project area, hiring and contracting locally, and ensuring protection of the environment during its exploration activities.
Technical Disclosure Technical information in this news release has been reviewed and approved by Simon Mottram, F.AusIMM (Fellow Australia Institute of Mining and Metallurgy), President of Bravo Mining Corp. who serves as the Company’s “qualified person”, as defined in National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101“). Mr. Mottram has verified the technical data and opinions contained in this news release.
Forward Looking Statements
This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as “Exceptional”, “High-Grade”, “Highlights”, “broadest”, “multiple”, “confidence”, “potential”, “rich”, “possibility”, “as yet unseen”, “continues”, “compare well”, “exceed”, “highlights”, and other similar words, phrases or statements that certain events or conditions “should”, or “will” occur. In particular, this news release contains forward-looking information pertaining to the Company’s ongoing re-assay and drill programs and the results thereof; the expected completion of geophysical surveys and the results of such surveys; the potential for the definition o new styles of mineralization and extensions to depth and the Company’s plans in respect thereof. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, environmental risks, limitations on insurance coverage; and other risks and uncertainties involved in the mineral exploration and development industry. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including, but not limited to, the assumption that the assay results confirm the interpreted mineralization contains significant values of nickel, copper and also contain PGMs and Au; final drill and assay results will be in line with management’s expectations; that activities will not be adversely disrupted or impeded by regulatory, political, community, economic, environmental and/or healthy and safety risks; that the Luanga Project will not be materially affected by potential supply chain disruptions; and general business and economic conditions will not change in a materially adverse manner. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.
Schedule 1: Drill Hole Collar Details
HOLE-ID
Company
East (m)
North (m)
RL (m)
Datum
Depth (m)
Azimuth
Dip
DDH22LU016
Bravo
659067.99
9341140.05
231.20
SIRGAS2000 UTM22S
199.05
90.00
-60.00
DDH22LU021
Bravo
660000.70
9341825.04
256.77
SIRGAS2000 UTM22S
250.00
90.00
-60.00
DDH22LU022
Bravo
659195.85
9341118.15
227.84
SIRGAS2000 UTM22S
150.30
330.00
-60.00
DDH22LU023
Bravo
660000.02
9341721.99
241.36
SIRGAS2000 UTM22S
250.05
90.00
-60.00
DDH22LU024
Bravo
657100.06
9339629.97
259.19
SIRGAS2000 UTM22S
170.00
360.00
-60.00
DDH22LU025
Bravo
659158.01
9341182.98
225.69
SIRGAS2000 UTM22S
150.35
330.00
-60.00
DDH22LU027
Bravo
659245.18
9341231.67
229.00
SIRGAS2000 UTM22S
150.35
330.00
-60.00
DDH22LU028
Bravo
657000.01
9339729.10
296.06
SIRGAS2000 UTM22S
170.40
360.00
-60.00
DDH22LU029
Bravo
659836.03
9341725.05
243.28
SIRGAS2000 UTM22S
183.75
90.00
-60.00
Schedule 2: Assay Methodologies and QAQC
Samples follow a chain of custody between collection, processing and delivery to the ALS laboratory in Parauapebas, state of Pará, Brazil. The drill core is delivered to the core shack at Bravo’s Luanga site facilities and processed by geologists who insert certified reference materials, blanks and duplicates into the sampling sequence. Drill core is half cut and placed in secured polyurethane bags, then in security-sealed sacks before being delivered directly from the Luanga site facilities to the Parauapebas ALS laboratory by Bravo staff. Additional information about the methodology can be found on the ALS global website (ALS) in the analytical guides.
Quality Assurance and Quality Control (“QAQC“) is maintained internally at the lab through rigorous use of internal certified reference materials, blanks, and duplicates. An additional QAQC program is administered by Bravo using certified reference materials, duplicate samples and blank samples that are blindly inserted into the sample batch. If a QAQC sample returns an unacceptable value an investigation into the results is triggered and when deemed necessary, the samples that were tested in the batch with the failed QAQC sample are re-tested.
Vancouver, British Columbia–(Newsfile Corp. – November 1, 2022) – Riverside Resources Inc. (TSXV: RRI) (OTCQB: RVSDF) (FSE: 5YY) (“Riverside” or the “Company”) is sad to report the passing of its longest serving director, Brian Groves, who passed due to natural causes on Monday Oct 24, 2022. Brian had become the first additional director to the company on Oct 1, 2007, immediately after the Company listed on the TSX-V on August 28, 2007. Brian’s leadership added immediate experience, commitment, and sage guidance to the Riverside team and throughout the Company’s growth over the past 15 years. While remaining a strong voice of reason and value for all stakeholders, Brian’s help with First Nations and mentoring were among his key traits. His knowledge of geology, geophysics and the mineral exploration business helped guide the company on multiple occasions.
Riverside’s President and CEO, John-Mark Staude, commented: “While being a great director, Brian was a constant supporter of Riverside and a friend. He was integral in helping us on many occasions with finding more balance and perspective in the initiatives we took on. To that effect, he also had a continued focus on family and still regularly kept up with our industry. Brian will be dearly missed!”
Certain statements in this press release may be considered forward-looking information. These statements can be identified by the use of forward-looking terminology (e.g., “expect”,” estimates”, “intends”, “anticipates”, “believes”, “plans”). Such information involves known and unknown risks — including the availability of funds, the results of financing and exploration activities, the interpretation of exploration results and other geological data, or unanticipated costs and expenses and other risks identified by Riverside in its public securities filings that may cause actual events to differ materially from current expectations. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
TORONTO, Nov. 1, 2022 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to provide the following drilling update following the recent closing of its successful $10.7 million bought deal equity financing. The Company is currently advancing on schedule and on budget with its 20,000-metre drill program for 2022.
The Guayabales project is located in the mining-friendly department of Caldas, in the heart of a long-established mining camp with ten fully permitted and operating mines located within three kilometres of the project. As a result, the Guayabales project is blessed with excellent infrastructure with roads and hydroelectric powerlines traversing the project and an abundant labor force located nearby in the townships of Supia and Marmato.
The Company’s Main Breccia discovery at the Apollo target (“Apollo”) has been the primary focus of the current drill program with the discovery hole being announced in June 2022. The Main Breccia discovery is a high-grade and bulk tonnage, copper-silver-gold porphyry-related breccia system characterized by two main yet distinct pulses of mineralized fluids flooding the breccia with metals. The first fluid pulse comes from the porphyry phase of the system and is responsible for impregnating the breccia matrix with most of the copper mineralization as well as some of the silver and gold mineralization. The second fluid pulse comes from the late-stage porphyry related carbonate base metal veins which overprint the breccia and flood the breccia matrix in places with an abundance of silver and gold mineralization and to a lesser extent zinc, lead, and copper mineralization.
There are three drill rigs presently operating at Apollo and to date the Company has completed a total of 25 diamond drill holes with assay results already reported from the first 14 holes. Assay results from holes APC-15 to APC-25 are currently outstanding and are expected to be received throughout the balance of 2022. Also, coring is underway for holes APC-26 and APC-27 with drill hole APC-28 expected to start in the near term. Previously announced intercepts into the Main Breccia discovery at Apollo include:
Table 1: Assay Results from Intercepting the Main Breccia Discovery at Apollo
Hole #
From (m)
To (m)
Intercept (m)
Au (g/t)
Ag (g/t)
Cu%
Zn %
Pb%
Mo %
AuEq (g/t)*
CuEq (%) *
APC-14
84.25
131.70
47.45
0.81
13
0.20
0.01
0.00
0.003
1.36
0.70
and
197.00
391.30
194.30
0.39
56
0.44
0.03
0.01
0.002
2.00
1.02
APC-12
191.35
429.05
237.70
1.15
72
0.38
0.08
0.07
0.001
2.88
1.47
APC-8
202.00
467.75
265.75
1.26
55
0.22
0.07
0.05
0.045
2.44
1.24
APC-7
85.65
111.20
25.55
0.4
23
0.02
0.08
0.04
0.002
0.69
–
and
199.85
238.25
38.40
1.3
21
0.04
0.05
0.03
0.000
1.51
–
and
325.00
345.45
20.45
0.49
31
0.05
0.02
0.01
0.000
0.89
–
APC-6
364.60
690.65
326.05
0.85
10
0.04
0.04
0.02
0.001
1.07
–
APC-5
210.25
478.25
268.00
0.89
22
0.13
0.11
0.07
0.002
1.50
–
APC-3
303.40
484.00
180.60
1.52
39
0.16
0.13
0.11
0.001
2.43
–
APC-2
154.70
361.90
207.15
1.46
45
0.31
0.08
0.05
0.002
2.68
1.37
APC1-W
293.00
382.40
89.40
0.89
58
0.39
0.07
0.06
0.001
2.46
1.25
*See press releases dated August 10, 2022, August 19, 2022, September 7, 2022, September 13, 2022, and October 6, 2022, for further details.
As a result of the cash infusion from the recent financing, the Company expects to remain aggressive with drilling in 2023. A more detailed exploration program for 2023 will be announced in late Q4 once internal planning has been completed and board of director approval has been obtained.
Figure 1. Guayabales Project: Located in the Heart of an Established Mining Camp Abutting Ten Permitted Producing Mines (CNW Group/Collective Mining Ltd.)
Figure 2. Main Breccia Discovery Dimensions, Drill Hole Highlights, and Outstanding Holes (CNW Group/Collective Mining Ltd.)
About Collective Mining Ltd.
To see our latest corporate presentation and related information, please visit www.collectivemining.com.
Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.
The Company’s flagship project, Guayabales, is anchored by the discovery of the “Main Breccia” at the Apollo target in June 2022, which is a large bulk-tonnage, and high-grade copper, silver and gold porphyry-related hydrothermal breccia system. The Company’s near-term objective is to continue expanding the size of the Main Breccia discovery through step-out drilling while simultaneously increasing confidence in the highest-grade portions of the system.
Management and insiders own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.
Qualified Person (QP) and NI43-101 Disclosure
David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).
Technical Information
Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.
FORWARD-LOOKING STATEMENTS
This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.
Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.
Burlington, Ontario–(Newsfile Corp. – October 28, 2022) – Silver Bullet Mines Corp. (TSXV: SBMI) (OTCQB: SBMCF) (‘SBMI’ or ‘the Company’) on October 21, 2022 announced a financing of Units (the “Financing”), whereby each Unit consisted of one common share and one common share purchase warrant. Each Unit is priced at $0.20 (twenty cents). Each common share purchase warrant has a 2-year term and is exercisable at $0.30 (thirty cents). SBMI announces the Financing has received conditional stock exchange approval. The Financing will close in tranches as funds are received.
A trading blackout on all Company directors, management and consultants was imposed by the Chair of the board, and such blackout continues. This was because the Company has been provided with a steady stream of data and opinions from third parties with respect to adding a further processing facility to the existing mill in Arizona to be able to extract the recently discovered palladium, platinum, rhodium, osmium and high-grade gold, and at this time the Company is unable to determine which facts are material and which are not. This determination can only be made in the fullness of time as further facts are determined. The trading blackout is the most conservative approach to protecting the integrity of the markets and the reputations of the insiders.
During this period the Company has been working with its auditors in the normal course to prepare the Company’s audited financial statements and MDA for the year ending June 30, 2022 (the “Filings”). The likely imminent determination of which facts are material may impact the subsequent event notes for the Filings. Further, the Company has encountered procedural challenges in completing its first audit as an operating company, including but not limited to cross-border documentation. Some of these challenges were caused by COVID-19 restrictions on travel to the mill and mine sites in Arizona, others by a local lack of familiarity with audit processes. Management sees these challenges as transitory and procedural. There are no items in disagreement, whether material or not, between the auditors and the Company.
As a result, it is likely the Filings will not be filed on Friday, October 28th, 2022. The effect of this will likely be a management cease trade order, which is the same in substance as the blackout already imposed by the Chair. There is no impact upon any shareholder apart from directors, management and consultants. The Company anticipates being able to file the Filings very soon thereafter as the procedural challenges are remedied.
The Company waited as long as possible to disseminate this press release, to obtain as current input as possible from the auditors and the Company’s audit committee as to timing to effect the Filings.
For further information, please contact:
John Carter Silver Bullet Mines Corp., CEO cartera@sympatico.ca +1 (905) 302-3843
Peter M. Clausi Silver Bullet Mines Corp., VP Capital Markets pclausi@brantcapital.ca +1 (416) 890-1232
Cautionary and Forward-Looking Statements
This news release contains certain statements that constitute forward-looking statements as they relate to SBMI and its subsidiaries. Forward-looking statements are not historical facts but represent management’s current expectation of future events, and can be identified by words such as “believe”, “expects”, “will”, “intends”, “plans”, “projects”, “anticipates”, “estimates”, “continues” and similar expressions. Although management believes that the expectations represented in such forward-looking statements are reasonable, there can be no assurance that they will prove to be correct.
By their nature, forward-looking statements include assumptions, and are subject to inherent risks and uncertainties that could cause actual future results, conditions, actions or events to differ materially from those in the forward-looking statements. If and when forward-looking statements are set out in this new release, SBMI will also set out the material risk factors or assumptions used to develop the forward-looking statements. Except as expressly required by applicable securities laws, SBMI assumes no obligation to update or revise any forward-looking statements. The future outcomes that relate to forward-looking statements may be influenced by many factors, including but not limited to: the impact of SARS CoV-2 or any other global virus; reliance on key personnel; the thoroughness of its QA/QA procedures; the continuity of the global supply chain for materials for SBMI to use in the production and processing of ore; shareholder and regulatory approvals; activities and attitudes of communities local to the location of the SBMI’s properties; risks of future legal proceedings; income tax matters; fires, floods and other natural phenomena; the rate of inflation; availability and terms of financing; distribution of securities; commodities pricing; currency movements, especially as between the USD and CDN; effect of market interest rates on price of securities; and, potential dilution. SARS CoV-2 and other potential global viruses create risks that at this time are immeasurable and impossible to define.
