Tag: #JuniorMining

Riverside Hits Gold in 8 of 12 Holes at the Oakes Gold Project in the Geraldton Gold Belt, Ontario, Canada

Post author By admin
Post date September 13, 2022

Vancouver, British Columbia–(Newsfile Corp. – September 13, 2022) – Riverside Resources Inc. (TSXV: RRI) (OTCQB: RVSDF) (FSE: 5YY) (“Riverside” or the “Company”) is pleased to report assay results for the remaining 7 drillholes of its twelve-hole, 1700-meter diamond drill program completed at the Oakes Gold Project (the “Project”) in northwestern Ontario, Canada. The primary focus of the first drill program at Oakes was to test the ‘HG’ Target identified by geophysics and trenching programs for gold grades and continuity. The results came back favorable with hole 22-11 returning 5 intervals of gold over a total interval of 55 meters and hole 22-06 returning 4m @ 1.7 g/t Au. The Induced Polarization (IP) work conducted by Riverside in the summer of 2021 showed the HG IP Target extended westward beyond the area of trenching and sampling. Drilling this year has now confirmed the gold continuity of over 1.2 kilometer strike, hitting the mineralized structure and further open in both east and west. The drill results announced here fit with the orogenic gold model and further drilling can be progressed with confidence as all the holes of this program were shallow, with intercepts at less than 120m for most cases, while the system is wide open at depth.

This drill campaign has now successfully expanded the known gold mineralization well beyond the outcrops and laid the groundwork for the next drill campaign to continue expanding the Oakes gold camp. IP data provided strong conductivity and complimentary resistivity anomaly trending roughly east-west parallel to the geological units with greater confidence. The 7 holes announced here intercepted favorable geology of metavolcanics, “greenstone”, consistent with the geology noted in the first five holes and further geological constraints. As this part of Oakes has never been drilled, the first drill program comprised of shallow holes with the intent of intercepting the target at 100 m vertical below surface. The mineralized zone on surface is known to pinch and swell and averages about 5 m in width. The best hole in the second batch of reporting was DDH-22-06 which returned 1.7 g/t over 4 m with one sample being almost 5 g/t gold. The best intercept in the program was 8.4 g/t over 1 m in Hole #2.

Table 1: Spring 2022 Drill Program Highlights at Oakes (holes 6-12)

Hole No.	from (m)	to (m)	length (m)	Au (g/t)
OAKES-22-06	72	76	4	1.7
including	72	73	1	4.9
OAKES-22-06	85	88	3	1.0
OAKES-22-07	98	100	2	0.9
OAKES-22-08	9	10.5	1.5	0.4
OAKES-22-09	18	18.5	0.5	1.0
OAKES-22-11	22	23	1	2.2
OAKES-22-11	96.5	98	1.5	1.0
OAKES-22-11	113.5	115	1.5	1.1
OAKES-22-11	125.5	127	1.5	2.3
OAKES-22-11	151	152	1	0.9
OAKES-22-12	106.5	108	1.5	2.4
OAKES-22-12	130	131	1	0.4

All samples comprised half-core, saw-cut samples with QA/QC described below and further at www.rivres.com. Samples are generally considered to be 90-95% to true width.https://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522ctopid%2522%253A%25221542500%253B1577000%2522%252C%2522hashtag%2522%253A%25221542500%253B1577000%2522%252C%2522wiki_topics%2522%253A%2522Target_Corporation%253BDrill%253BTom%25C3%25A1%25C5%25A1_Hole%25C5%25A1%253BDrilling%253BCompany%2522%252C%2522lmsid%2522%253A%2522a0V0W00000HOPDcUAP%2522%252C%2522revsp%2522%253A%2522newsfile_64%2522%252C%2522lpstaid%2522%253A%25220b3e363e-27c8-3807-828c-310b2cededf8%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D

Technical Interpretations & Observations

DDH-22-06 & 07 were designed to intercept the HG Zone beneath Trench 1 at about 100 m depth. The target zone comprises strongly foliated, fine grained, metavolcanic rocks showing strong silicified zones with narrow bleached sections. Alteration comprises abundant biotite and chlorite bands, the top of the unit shows quartz veining with semi-massive pyrite-pyrrhotite and trace chalcopyrite which generally described the mineralized environment at Oakes. Quartz carbonate veinlets and stringers are more frequent from 80 m to 110 m down the hole consistent with the drill target gold bearing area. The overall 25-30m mineralization halo and main zone which is near vertical, now demonstrates strong consistency and provides the Company confidence of a significant gold system at Oakes. DDH-22-08 hit a fault and could not reach the target. DDH-22-09 was the setback collared to drill the Brinklow IP anomaly south of HG Zone, while DDH-22-10 was collared on the Crib Road with the intent to test the IP anomaly associated with the metasediment/metavolcanic contact boundary mapped at this location. Holes 8, 9 and 10 were not intended to evaluate the HG target and were instead testing parallel features. Holes 6, 7, 11, 12 provide technical data specific to the HG trend and give positive results for further exploration at Oakes which lies 25 km east of the Hard Rock Mine currently being constructed by Greenstone Gold (Equinox Gold) with a Proven & Probable Reserves of 5.5Moz at 1.27 g/t Au.^[1]

Figure 1: Collars and projected drill holes for 12 holes plotted on IP Chargeability Map

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/6101/136913_da0d27ece44d68d1_002full.jpg

DDH-22-11 was targeting an IP conductivity anomaly associated with the HG Zone on trend with the mineralization defined on surface (and in drill core) at Hole 6 located 600 m to the east along what is believed to be the same structure. Assays returned gold results associated with veining throughout the hole and as high as 2.3 g/t gold. Hole 11 was collared in metasedimentary rocks and drilled northward into metavolcanic rocks. Bedding and the contact between the two units was measured at 50 degrees to the core axis whereas foliation and shearing is at about 45 degrees. Alteration comprises moderately to strong biotitic and weak to strong chlorite zones sometimes associated with carbonate zones. Quartz veining and silica content increases starting at 80 m downhole. Sulphides are associated with quartz veins and comprise 2-5% disseminated Pyrite-Pyrrhotite seen within local fracture fillings and stringers.

Figure 2: Interpreted North – South Cross Section DDH-22-11 demonstrating the progression from brittle down into brittle-ductiledeformation as the targeting model having found gold over 55m drill width zone in hole 11

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/6101/136913_da0d27ece44d68d1_004bfull.jpg

DDH-22-12 was collared in gabbro and drilled north through metasedimentary rock into metavolcanics. Mineralization is noted within similar altered rock but only within shears in the mafic volcanics and does not appear to be associated with the contact zones. Sheared zones commonly a focus for gold mineralization in orogenic systems like this one are expressed as altered, fine-grained, metavolcanics with moderate to strong chlorite-biotite alteration with quartz-carbonate veins and stringers with 1-2% disseminated pyrite and pyrrhotite.

Conclusions

The HG Zone at Oakes has been proven to extend well beyond the strike extent defined by trenching and has now been drill proven to at least 1.1 km in length. To date the drilling has only tested the upper 100 m of the structure where mineralization appears associated with quartz veins that show visible gold within pyrite rich veins. The gold mineralization is associated with quartz and quartz-carbonate veins in shear zones within metavolcanic rocks often (near-vertical which can bode well for potential future mining and predicting the next round of drilling). Quartz veins that are subparallel to foliation appear to be the veins that carry gold and are cut by later quartz carbonate veins that do not have sulfides. The quartz veins are mostly associated with brittle type fracturing with lesser semi-ductile type, potentially indicating that drilling was approaching the upper brittle-ductile transition which can be highly favorable in large orogenic gold deposits. The nature of the fracturing suggests that the shallow drilling is primarily within the upper brittle deformation zone as shown in Figure 2. The fact that the gold veins can now be traced in drill holes more than 3x beyond the previous surface trenching expands the Oakes project potential greatly.

The Oakes property is located along the general metallogenic boundary of the Wabigoon and Quetico sub-provinces and this boundary is commonly a major fault breaks, and large gold resources are associated with these breaks generally in secondary shear zones in the Canadian shield geologic provinces. The Hemlo Gold Mine to the south is hosted in a brittle fracture environment and the Black Fox gold mine to the east in Matheson is hosted in a semi-ductile fracture system at depth and more brittle near the surface. Riverside sees the potential for brittle fracture zones progress into semi ductile and ductile zones at depth in general becoming wider and potentially richer as has commonly been found and further drilling is warranted.

Riverside’s President and CEO, John-Mark Staude: “Riverside has expanded the gold zone at Oakes along strike over 1 km and begun showing the continuity on surface and to depth, consistent with the goals for the 2022 drill program. Next steps will include more geophysics to map the structural features to trace the HG Zone and gold mineralization. We are very encouraged by these good results covered in this and the prior news release and are pleased to see how effective the geophysical surveys were at finding mineralization and predicting extensions. Moreover, we remain very cautiously optimistic to see our first program of shallow drilling demonstrate continuity of mineralization along strike and at depth. Riverside continues to pursue the Prospect Generator hybrid model, by providing shareholders with the upside for discovery on multiple projects, and with different partners, along with the current self-funded value adding project.”

Qualified Person & QA/QC:
As part of the quality control Riverside inserted blanks, duplicates and two different standards, into the sample stream prior to delivery at Activation Laboratories in Thunder Bay. Logged core was delivered from site to a core cutting facility in Thunder Bay by Riverside and trucked to Activation Laboratories from this facility typically in batches of 2 to 4 holes at a time. Multi-Element Analysis using Aqua Regia Extraction and (40 element) Inductively Coupled Plasma Atomic Emission Spectrometry Analytical and fire assay for gold methods where used. Activation Laboratories is an ISO/IEC accredited laboratory.

The scientific and technical data contained in this news release was reviewed and approved by Freeman Smith, P.Geo., a non-independent qualified person to Riverside Resources, who is responsible for ensuring that the geologic information provided within this news release is accurate and who acts as a “qualified person” under National Instrument 43-101 Standards of Disclosure for Mineral Projects.

About Riverside Resources Inc.:
Riverside is a well-funded exploration company driven by value generation and discovery. The Company has over $4M in cash, no debt and less than 80M shares outstanding with a strong portfolio of gold-silver and copper assets and royalties in North America. Riverside has extensive experience and knowledge operating in Mexico and Canada and leverages its large database to generate a portfolio of prospective mineral properties. In addition to Riverside’s own exploration spending, the Company also strives to diversify risk by securing joint-venture and spin-out partnerships to advance multiple assets simultaneously and create more chances for discovery. Riverside has properties available for option, with information available on the Company’s website at www.rivres.com.

ON BEHALF OF RIVERSIDE RESOURCES INC.

“John-Mark Staude”

Dr. John-Mark Staude, President & CEO

For additional information contact:

John-Mark Staude
President, CEO
Riverside Resources Inc.
info@rivres.com
Phone: (778) 327-6671
Fax: (778) 327-6675
Web: www.rivres.com

Mehran Bagherzadeh
Corporate Communications
Riverside Resources Inc.
Mehran@rivres.com
Phone: (778) 327-6671
TF: (877) RIV-RES1
Web: www.rivres.com

Certain statements in this press release may be considered forward-looking information. These statements can be identified by the use of forward-looking terminology (e.g., “expect”,” estimates”, “intends”, “anticipates”, “believes”, “plans”). Such information involves known and unknown risks — including the availability of funds, the results of financing and exploration activities, the interpretation of exploration results and other geological data, or unanticipated costs and expenses and other risks identified by Riverside in its public securities filings that may cause actual events to differ materially from current expectations. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

_______________________________

^[1] https://www.equinoxgold.com/_resources/projects/technical_reports/2021-Hardrock.pdf

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/136913

Tags #InvestingInBatteryMetals, #InvestingInCopper, #JuniorMining, #MauriceJackson, #MilesFranklin, #ProvenAndProbable, #RiversideResources, #RRI, John mark staude, maurice jackson, proven and probable

Energy Junior Mining Precious Metals Uncategorized

Dolly Varden Silver Intersects 1.60 meters of 4,326 g/t Ag, 4.2% Pb, 1.4% Zn and 1.0 g/t Au within 19.85 meters Averaging 584 g/t Ag at Wolf Vein Extension

Post author By admin
Post date September 13, 2022

Vancouver, British Columbia–(Newsfile Corp. – September 13, 2022) – Dolly Varden Silver Corporation (TSXV: DV) (OTCQX: DOLLF) (the “Company” or “Dolly Varden“) is pleased to announce results from drilling at the Wolf Vein, including step-out hole DV22-300 which returned a significant, high-grade silver intercept. Based on the grade and strength of the mineralizing system, the Company has prioritized continued step-out drilling at Wolf during for the remainder of the 2022 season.

DV22-300 encountered a wide interval of multi-phase veins and breccia, intersecting 19.85m (13.90m true width) averaging 584 g/t Ag, 0.92 %Pb, 0.56% Zn and 0.19 g/t Au, with bonanza grade silver mineralization grading 4,326 g/t Ag, 4.21% Pb, 1.36% Zn and 1.00 g/t Au over 1.60m (1.12m true width) within a sulphide and silver sulphosalt matrix vein breccia in the main veined interval.

Figure 1. Kitsault Valley trend and mineral deposits

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1728/136919_ad8a8710944e89e1_002full.jpghttps://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522ctopid%2522%253A%25221542500%253B1480989%253B1481489%2522%252C%2522hashtag%2522%253A%25221542500%253B1480989%253B1481489%2522%252C%2522wiki_topics%2522%253A%2522Company%253BBreccia%253BDrilling%2522%252C%2522lmsid%2522%253A%2522a0V0W00000HOPDcUAP%2522%252C%2522revsp%2522%253A%2522newsfile_64%2522%252C%2522lpstaid%2522%253A%2522edcf1f2a-bcfa-39ba-b8d2-b5dc80848c6b%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D

“With an increase in vein intensity and silver grades, the Wolf Vein area is emerging as a large system, rivaling our Torbrit Deposit. With an established plunge length of over 500 meters from the historic underground workings, we are continuing to step out along this trend towards the Kitsol Vein, where we recently announced similar, high-grade mineralization over 1,400 meters away. The increasing gold and base metal content, in addition to the silver, is highly encouraging, as well as the significant widths that are potentially amenable to bulk underground mining techniques,” said Shawn Khunkhun, President and CEO of Dolly Varden Silver.

The mineralized interval in DV22-300 is a southwesterly step-out along strike and down dip from DV21-273, which returned 17.50m averaging 214 g/t Ag and 0.47% Pb including 1.22 m averaging 1,532 g/t Ag, 0.44 g/t Au, 2.11 % Pb and 1.07% Zn (see Dolly Varden news release, December 20, 2021) and projects as a mineralized shoot over 55m down plunge from DV21-273. High-grade silver in DV22-300 occurs within a very strong, multiphase vein and breccia system that also includes significant gold and base metal mineralization.

Figure 2. Wolf Vein Longitudinal Section

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1728/136919_ad8a8710944e89e1_003full.jpg

The strength of the mineralizing system, as well as silver and potentially gold appears to be increasing at depth and to the southwest; assays are pending for DV22-316, which encountered strong veining, alteration, brecciation and one occurrence of visible gold over 200m away from DV22-300 (see Figure 2). All of these drill holes tested below the Upper Hazelton sediment cap with associated strong potassic alteration; this trend continues south for 1,400 m to the Kitsol Vein (see Figure 1).

Figure 3. Geological Cross Section of Wolf Vein. 25 meter window width looking northwest. DV22-194 is same dip as DV22-300 approximately 30m off section.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1728/136919_ad8a8710944e89e1_004full.jpg

The Wolf Vein is a steep dipping, high-grade silver vein deposit that is part of the current Mineral Resource Estimate at Dolly Varden’s Kitsault Valley trend. In 2021, geological modelling of the deposit showed expansion potential along strike to the southwest below the sediment cap that masks surface expression of the vein mineralization and associated alteration. With the discovery that the system continued to the southwest over 8,000m of follow up drilling has been completed thus far during the 2022 exploration program. This drilling has defined high grade silver mineralization to a depth of 500m below surface and extended the zone over 350m down plunge from historic drilling and over 500m from the historic underground workings.

Results have been received for the first six exploration drill holes testing the Wolf Vein extension. All holes were drilled from the same pad with varying azimuths and dips (see Table 2). These drill holes tested below the Upper Hazelton sediment cap and have encountered a robust, multi-phase vein and breccia mineralizing system that remains wide open along strike to the south and down dip. The associated strong potassic alteration, a key indicator for silver mineralization at the Kitsault Valley Project, continues below the sediment cap and south for 1,400m to the Kitsol Vein. All holes drilled during 2022, except DV22-280, intersected the extension of the Wolf Vein, suggesting a plunge at approximately 45 degrees to the southwest. DV22-280 came out of the sediment cap into the footwall of the vein. Drill hole DV22-281- intersected impressive base metal values in addition to silver: 3.75m (2.43m true width) averaging 170 g/t Ag, 6.25% Pb, 14.12% Zn. In drill holes that hit the Wolf vein outside of the interpreted plunge of the high-grade silver zone, significant lead and zinc intervals are present.

Mineralization at the Wolf Vein consists of multiple epithermal silica vein and brecciation events along a NE trending, steeply NW dipping zone (Figures 4 and 5). Silver mineralization includes: silver sulphosalts, tennantite, argentite and argentiferous galena hosted in vein and vein breccia mineralization.

Figure 4. DV22-300 mineralized interval of multi-phase quartz vein and vein breccias

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1728/136919_ad8a8710944e89e1_005full.jpg

Figure 5. quartz vein brecciation with sulphide and sulphosalt matrix

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1728/136919_ad8a8710944e89e1_006full.jpg

Table 1. Complete drill hole assays.

Hole ID	From	To	Total (m)	Approx True Width (m)	Ag (g/t)	Pb (%)	Zn (%)	Au (g/t)	Ag Eq (g/t)*
DV22-280	220.90	223.90	3.00	2.40	84	0.02	0.02	0.03	89
including	220.90	222.05	1.15	0.92	138	0.03	0.04	0.07	146
DV22-281	354.25	371.00	16.75	10.89	87	1.56	3.62	0.02	274
including	355.55	358.57	3.02	1.96	182	0.35	1.04	0.02	233
including	367.25	371.00	3.75	2.43	170	6.25	14.12	0.06	903
DV22-285	424.75	436.00	11.25	6.75	NSV	0.13	0.51	0.04	30
including	425.25	425.75	0.50	0.30	17	1.09	1.29	0.01	101
including	432.00	432.93	0.93	0.56	NSV	0.16	2.76	0.46	152
and	452.59	485.84	33.25	19.95	NSV	0.10	0.28	NSV	29
including	458.00	459.25	1.25	0.75	42	0.47	1.08	NSV	98
including	483.36	484.46	1.10	0.66	244	0.80	1.41	0.02	323
and	540.00	541.40	1.40	0.84	NSV	0.17	2.52	0.12	112
DV22-288	475.40	476.80	1.40	0.77	NSV	0.16	1.28	0.01	56
and	515.70	526.65	10.95	6.02	10	0.71	0.66	NSV	59
including	516.20	517.00	0.80	0.44	16	1.06	0.24	0.01	58
including	522.00	523.00	1.00	0.55	6	0.73	1.32	0.02	81
including	525.15	526.65	1.50	0.83	26	2.80	2.14	0.05	198
and	569.00	569.80	0.80	0.44	27	1.56	1.39	NSV	128
and	587.40	589.00	1.60	0.88	6	0.25	1.15	0.01	58
DV22-294	343.40	346.80	3.40	2.38	18	0.35	0.84	NSV	62
including	346.30	346.80	0.50	0.35	78	1.72	3.05	0.02	249
and	351.60	354.65	3.05	2.14	128	0.73	2.04	0.01	229
including	351.60	353.10	1.50	1.05	226	0.97	1.72	0.02	322
DV22-300	325.50	345.35	19.85	13.90	584	0.92	0.56	0.19	649
including	342.00	343.60	1.60	1.12	4326	4.21	1.36	1.00	4590
and	353.25	354.70	1.45	1.02	347	0.65	0.53	0.10	395

*AgEq was calculated using $US1650/oz Au, $US20/oz Ag, $US0.90/lb Pb and $US1.10/lb Zn

Table 2. Drill hole collar locations and orientations

Hole ID	Easting UTM83 (m)	Northing UTM83 (m)	Elev. (m)	Azimuth	Dip	Length (m)
DV22280	467089	6173630	388	120	-45	392.00
DV22281	467089	6173630	388	120	-65	495.00
DV22285	467089	6173630	388	120	-70	573.00
DV22288	467089	6173630	388	120	-73	720.00
DV22294	467089	6173630	388	110	-60	423.00
DV22300	467089	6173630	388	129	-60	396.00

Quality Assurance and Quality Control

The Company adheres to CIM Best Practices Guidelines for exploration related activities conducted on its property. Quality Assurance and Quality Control (QA/QC) procedures are overseen by the Qualified Person.

Dolly Varden QA/QC protocols are maintained through the insertion of certified reference material (standards), blanks and field duplicates within the sample stream. Drill core is cut in-half with a diamond saw, with one-half placed in sealed bags and shipped to the laboratory and the other half retained on site. Third party laboratory checks on 5% of the samples are carried out as well. Chain of custody is maintained from the drill to the submittal into the laboratory preparation facility.

Analytical testing was performed by ALS Canada Ltd. in North Vancouver, British Columbia. The entire sample is crushed and a 500 gram split is pulverized to minus 200mesh. Multi-element analyses were determined by Inductively-Coupled Plasma Mass Spectrometry (ICP-MS) for 48 elements following a 4-acid digestion process. High grade silver testing was determined by Fire Assay with either an atomic absorption, or a gravimetric finish, depending on grade range. Au is determined by Fire Assay on a 30g split.

Qualified Person

Rob van Egmond, P.Geo. Vice-President Exploration for Dolly Varden Silver, the “Qualified Person” as defined by NI43-101 has reviewed, validated and approved the scientific and technical information contained in this news release and supervises the ongoing exploration program at the Dolly Varden Project.

About Dolly Varden Silver Corporation

Dolly Varden Silver Corporation is a mineral exploration company focused on advancing its 100% held Kitsault Valley Project (which combines the Dolly Varden Project and the Homestake Ridge Project) located in the Golden Triangle of British Columbia, Canada, 25kms by road to tide water. The 163 sq. km. project hosts the high-grade silver and gold resources of Dolly Varden and Homestake Ridge along with the past producing Dolly Varden and Torbrit silver mines. It is considered to be prospective for hosting further precious metal deposits, being on the same structural and stratigraphic belts that host numerous other, on-trend, high-grade deposits, such as Eskay Creek and Brucejack. The Kitsault Valley Project also contains the Big Bulk property which is prospective for porphyry and skarn style copper and gold mineralization, similar to other such deposits in the region (Red Mountain, KSM, Red Chris).

Forward Looking Statements

This release may contain forward-looking statements or forward-looking information under applicable Canadian securities legislation that may not be based on historical fact, including, without limitation, statements containing the words “believe”, “may”, “plan”, “will”, “estimate”, “continue”, “anticipate”, “intend”, “expect”, “potential”, and similar expressions. Forward-looking statements involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance, or achievements of Dolly Varden to be materially different from any future results, performance, or achievements expressed or implied by the forward-looking statements. Forward looking statements or information in this release relates to, among other things, the 2022 drill program at the Kitsault Valley Project, the results of previous field work and programs and the continued operations of the current exploration program, interpretation of the nature of the mineralization at the project and that that the mineralization on the project is similar to Eskay and Brucejack, results of the mineral resource estimate on the project, the potential to grow the project, the potential to expand the mineralization and our beliefs about the unexplored portion of the property.

These forward-looking statements are based on management’s current expectations and beliefs and assume, among other things, the ability of the Company to successfully pursue its current development plans, that future sources of funding will be available to the company, that relevant commodity prices will remain at levels that are economically viable for the Company and that the Company will receive relevant permits in a timely manner in order to enable its operations, but given the uncertainties, assumptions and risks, readers are cautioned not to place undue reliance on such forward-looking statements or information. The Company disclaims any obligation to update, or to publicly announce, any such statements, events or developments except as required by law.

For additional information on risks and uncertainties, see the Company’s most recently filed annual management discussion & analysis (“MD&A“) and management information circular dated January 21, 2022 (the “Circular“), both of which are available on SEDAR at www.sedar.com. The risk factors identified in the MD&A and the Circular are not intended to represent a complete list of factors that could affect the Company.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX-V) accepts responsibility for the adequacy or accuracy of this news release.

For further information: Shawn Khunkhun, CEO & Director, 1-604-609-5137, www.dollyvardensilver.com;

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/136919

Tags #InvestingInBatteryMetals, #JuniorMining, #KitsaultValleyProject, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, Dolly Varden Silver, Maurice Jacskon, Shawn Khunkhun

Base Metals Collective Mining Energy Junior Mining Precious Metals Uncategorized

Collective Mining Expands the Main Breccia Discovery at Apollo and Drills 265.75 Metres at 2.44 g/t Gold Equivalent

Post author By admin
Post date September 13, 2022

Figure 1

Plan View of the Guayabales Project Highlighting the Apollo Target

Figure 2

Plan View of the Apollo Target Area Outlining the Porphyry and Breccia Targets, their Related Soil Anomalies and Drill Holes Completed or Currently Underway

Figure 3

Plan View with Traces of Drill Holes Completed to Date in the Main Breccia Discovery at Apollo with Current Holes, APC-6 & APC-8 in Red

Figure 4

Apollo Target Cross Section with Core Photo Highlights for APC-8

APC-8 intersected a broad, high-grade zone of breccia mineralization with multiple, overprinting carbonate base metal veins and returned:
- 265.75 metres @ 2.44 g/t gold equivalent (157 metres vertical).
APC-6 also intersected the main breccia zone with some interfingering, mineralized rock flour breccia towards the northern end of the hole resulting in a broad interval as follows:
- 326.05 metres @ 1.07 g/t gold equivalent (295 metres vertical).
As a result of the new drill holes reported today, the maximum dimensions of the Main Breccia have increased to 350 metres along strike by 100 metres across by 500 metres depth (prior dimensions were 300m x 100m x 400m) and remains open in all directions.
Drill holes APC-12, APC-13 and APC-14 are now complete at Apollo with the following visual observations from logging:
- APC-12 and APC-14 intercepted the Main Breccia zone with both holes cutting more than 230 metres of potentially favourable mineralization; APC-13 unfortunately failed before reaching the Main Breccia zone but cut a narrow zone of sheeted veins at a shallow elevation.

https://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522ctopid%2522%253A%25221542500%253B1577000%2522%252C%2522hashtag%2522%253A%25221542500%253B1577000%2522%252C%2522wiki_topics%2522%253A%2522Breccia%253BMetre%253BTarget_Corporation%253BMultiview_orthographic_projection%2522%252C%2522lmsid%2522%253A%2522a0770000002m0AbAAI%2522%252C%2522revsp%2522%253A%2522globenewswire.com%2522%252C%2522lpstaid%2522%253A%25221fb8b9af-3c66-31d6-b59a-b218f4b1fb2c%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D

TORONTO, Sept. 13, 2022 (GLOBE NEWSWIRE) — Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from two additional holes completed at the Apollo target (“Apollo”) within the Company’s Guayabales project located in Caldas, Colombia. Apollo is a newly discovered high-grade copper-gold-silver porphyry-related breccia with previously announced intercepts including the discovery hole APC-2, which intersected 207.15 metres @ 2.68 g/t AuEq and APC-3, which intersected 180.60 metres @ 2.43 g/t AuEq. (See press releases dated August 10th and 29^th respectively). As part of its fully funded 20,000+ metre drill program for 2022, there are currently three diamond drill rigs operating at the Apollo target with an additional rig drilling from underground at the Olympus target.

“Apollo continues to deliver continuous, broad, and consistent zones of well mineralized breccia with overall grades being enhanced by the overprinting, high-grade carbonate base metal veins. Importantly, this remarkable copper-silver-gold discovery continues to grow materially in tonnage as we continue with aggressive step-out drilling in multiple directions. We will remain aggressive for the balance of 2022 and look forward to receiving additional assay results in the near term,” commented Ari Sussman, Executive Chairman.

Details (See Table 1 and Figures 1 – 4)

Seven diamond drill holes with accompanying assay results have now been announced at Apollo and based on results, the Main Breccia at Apollo has expanded and now measures up to 350 metres along strike by 100 metres across by 500 metres vertical. The target remains open in all directions and has the potential to evolve into a significant high-grade, bulk tonnage mineralized system.

Drill holes APC-6 and APC-8 were drilled in opposite directions from two separate drill pads (Pads 3 and 2) to the northeast and southwest respectively and were designed to test the depth and strike continuity of the mineralized breccia previously intersected in holes APC-1, APC-1W, APC-2, APC-3 and APC-5. The following results are highlighted:

APC-6:
326.05 metres @ 1.07 g/t AuEq from 364.60 metres (295 metres vertical) including:
151.5 metres @ 1.20 g/t AuEq from 480.15 metres down hole, and
10.55 metres @ 4.64 g/t AuEq from 680.10 metres down hole.

APC-6 is the deepest diamond hole drilled to date and this long intercept consisted primarily of favorable angular breccia with interfingering of rock flour breccia, which is less porous and therefore lower grade. APC-6 was collared from Pad 3 and terminated at a final depth of 759 metres.

APC-8:
265.75 metres @ 2.44 g/t AuEq from 202.00 metres (157 metres vertical) including:
13.20 metres @ 4.29 g/t AuEq from 202.0 metres down hole,
18.45 metres @ 4.55 g/t AuEq from 239.05 metres down hole,
28.45 metres @ 4.18 g/t AuEq from 279.40 metres down hole, and
15.50 metres @ 5.21 g/t AuEq from 342.6 metres downhole.

APC-8 intercepted continuous mineralized angular breccia with a sulphide matrix consisting of pyrite, chalcopyrite and pyrrhotite which has been overprinted by carbonate-base metal porphyry veins (“CBM”) hosting sphalerite in various locations and particularly in the upper portion of the intercept. The breccia clasts are all quartz diorite and diorite in composition and this hydrothermal system is clearly linked to a porphyry system. APC-8 was collared from Pad 2 and terminated at a final depth of 523 metres.

Four rigs continue to drill at the Guayabales project with assay results anticipated in the near term for three holes from Apollo with the following encouraging visual intercepts:
- APC-12 and APC-14 tested the Main Breccia discovery at Apollo with both holes intersecting more than 230 metres of potentially favourable mineralization.
- APC-13 ran into technical difficulties prior to reaching the Main Breccia but intersected a 15 metres zone of sheeted CBM veins at a shallow depth.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers an 800 metre X 700 metre area. The Apollo target area hosts the Company’s new Main Breccia discovery plus a vein system located above and on the eastern flank of the Main Breccia discovery and the Northern Breccia discovery located 250 metres to the north of the Main Breccia. Multiple additional untested breccia, porphyry and vein targets have been generated and will be drilled in due course. The overall Apollo target area also remains open for further expansion.

Table 1: Assays Results

HoleID	From (m)	To (m)	Intercept (m)	Au (g/t)	Ag (g/t)	Cu %	Zn %	Pb %	Mo %	AuEq (g/t)*
APC-6	364.60	690.65	326.05	0.85	10	0.04	0.04	0.02	0.001	1.07
Incl	480.15	631.65	151.50	0.96	11	0.04	0.06	0.03	0.001	1.20
	680.10	690.65	10.55	4.67	7	0.05	0.01	0.00	0.000	4.64
APC-8	202.00	467.75	265.75	1.26	55	0.22	0.07	0.05	0.045	2.44
Incl	202.00	215.20	13.20	3.68	27	0.03	0.32	0.24	0.238	4.29
	239.05	257.50	18.45	3.48	53	0.12	0.24	0.22	0.216	4.55
	279.40	307.85	28.45	3.70	24	0.16	0.03	0.02	0.016	4.18
	342.60	358.10	15.50	2.15	158	0.47	0.13	0.10	0.104	5.21

*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.014 x 0.95) + (Cu (%) x 1.96 x 0.95) + (Mo (%) x 7.35 x 0.95)+(Zn(%)x 0.86 x 0.95)+ (Pb(%)x 0.44 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Mo – US$15.00/lb, Zn – US$1.75/lb, Pb – US$0.9/lb, Ag – $20/oz and Au – US$1,400/oz and recovery rates of 95% for Au, Ag, Cu, Mo, Zn and Mo. Recovery rate assumptions are speculative as no metallurgical work has been completed to date.
** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.

Figure 1: Plan View of the Guayabales Project Highlighting the Apollo Target
https://www.globenewswire.com/NewsRoom/AttachmentNg/e54d7c61-3748-431e-9231-291488bbad6d

Figure 2: Plan View of the Apollo Target Area Outlining the Porphyry and Breccia Targets, their Related Soil Anomalies and Drill Holes Completed or Currently Underway
https://www.globenewswire.com/NewsRoom/AttachmentNg/501ecbc1-c805-46fa-a162-e54671c5292d

Figure 3: Plan View with Traces of Drill Holes Completed to Date in the Main Breccia Discovery at Apollo with Current Holes, APC-6 & APC-8 in Red
https://www.globenewswire.com/NewsRoom/AttachmentNg/168eaf9b-bd3f-41be-b6d8-bec5ccc3a866

Figure 4: Apollo Target Cross Section with Core Photo Highlights for APC-8
https://www.globenewswire.com/NewsRoom/AttachmentNg/3968aa02-fef9-421b-8479-9793202a518f

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Collective Mining is an exploration and development company focused on identifying and exploring prospective mineral projects in South America. Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, the mission of the Company is to repeat its past success in Colombia by making significant new mineral discoveries and advance the projects to production. Management, insiders and close family and friends own nearly 45% of the outstanding shares of the Company and as a result, are fully aligned with shareholders.

The Company currently holds an option to earn up to a 100% interest in two projects located in Colombia. As a result of an aggressive exploration program on both the Guayabales and San Antonio projects, a total of eight major targets have been defined. The Company has made significant grassroot discoveries at both projects with near-surface discovery holes at the Guayabales project yielding 302 metres at 1.11 g/t AuEq at the Olympus target, 163 metres at 1.3 g/t AuEq at the Donut target and recently, at the Apollo target, 207.15 metres at 2.68 g/t AuEq, 89.4 metres at 2.46 g/t AuEg and 87.8 metres at 2.49 g/t AuEg. At the San Antonio project, the Company intersected, from surface, 710 metres at 0.53 AuEq. (See related press releases on our website for AuEq calculations)

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Contact Information

Collective Mining Ltd.
Steven Gold, Vice President, Corporate Development and Investor Relations
Tel. (416) 648-4065

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

Tags #AriSussman, #CollectiveMining, #Guayabales, #JuniorMining, #MauriceJackson, #PreciousMetals, #ProvenAndProbable, CNL

Base Metals Gold Shore Resources Junior Mining Precious Metals

Goldshore Announces Strong Initial Drilling Results from the East Coldstream Deposit 13 Kilometers Northeast of Moss Lake

Post author By admin
Post date September 12, 2022

Vancouver, British Columbia–(Newsfile Corp. – September 12, 2022) – Goldshore Resources Inc. (TSXV: GSHR) (OTCQB: GSHRF) (FSE: 8X00) (“Goldshore” or the “Company“), is pleased to announce assay results from eight holes drilled to test gold mineralization at the East Coldstream deposit at the Moss Lake Project in Northwest Ontario, Canada (the “Moss Lake Gold Project“).

Highlights:

Results for eight holes, drilled to better define the gold mineralization of the East Coldstream deposit, have confirmed three broad lenses of gold mineralization within the two main shear zones with best intercepts of:
23m @ 1.34 g/t Au from 244m depth in CED-22-004, including
- 7.35m @ 3.77 g/t Au from 254.2m
17.3m @ 1.55 g/t Au from 487m depth in CED-22-005

20m @ 1.15 g/t Au from 402m depth in CED-22-006
26m @ 1.66 g/t Au from 451m, including
- 7.9m @ 4.20 g/t Au from 465m
25.7m @ 2.07 g/t Au from 488m
37.05m @ 1.54 g/t Au from 209.3m depth in CED-22-007
27.9m @ 1.14 g/t Au from 387m depth in CED-22-008, including
- 13m @ 2.14 g/t Au from 401m
The better intercepts are all centered around five high-grade gold zones of mineralized breccia, including:
1.05m @ 15.8 g/t Au from 257.95m depth in CED-22-004

0.9m @ 14.3 g/t Au from 472m depth in CED-22-006, and
0.65m @ 13.5 g/t Au from 502m

0.85m @ 10.6 g/t Au from 244.35m depth in CED-22-007, and
0.4m @ 12.6 g/t Au from 418m
These results show that the three gold mineralized lenses have a clear steep plunge and highlight significant upside potential at depth within structurally controlled shoots.

President and CEO Brett Richards stated: “These first results are extremely encouraging and significant to the overarching strategy of developing a secondary resource to Moss Lake. This will provide optionality that can only help improve the new PEA study next year. The results also point to a second significant project within our land package, which highlights the potential for further discoveries.”

Technical Overview

Figure 1 shows the location of the East Coldstream deposit relative to the Moss Lake deposit and the Archean Shebandowan Greenstone Belt. Table 1 and Figure 3 show the significant intercepts. Table 2 and Figure 2 show the drill hole locations. Figures 4 and 5 show a cross section through CED-22-006 and long section along the southern zone, respectively.

Figure 1: Location map showing East Coldstream relative to Moss Lake

To view an enhanced version of Figure 1, please visit:
https://images.newsfilecorp.com/files/8051/136640_94a2d25c448d2bce_002full.jpg

Figure 2: Drill plan showing drill holes (long section is Figure 5)

To view an enhanced version of Figure 2, please visit:
https://images.newsfilecorp.com/files/8051/136640_94a2d25c448d2bce_003full.jpg

Figure 3: Drill plan showing best of several +1 g/t Au intercepts

To view an enhanced version of Figure 3, please visit:
https://images.newsfilecorp.com/files/8051/136640_94a2d25c448d2bce_004full.jpg

Figure 4: Drill section through CED-22-006 and the Main Lens

To view an enhanced version of Figure 4, please visit:
https://images.newsfilecorp.com/files/8051/136640_94a2d25c448d2bce_005full.jpg

Figure 5: Long section through the Main and Sanders Lenses

To view an enhanced version of Figure 5, please visit:
https://images.newsfilecorp.com/files/8051/136640_94a2d25c448d2bce_006full.jpg

Table 1: Significant downhole gold intercepts

HOLE ID	FROM	TO	LENGTH (m)	TRUE WIDTH (m)	CUT GRADE (g/t Au)	UNCUT GRADE (g/t Au)
CED-22-001	322.00	324.45	2.45	1.8	0.80	0.80
	420.00	428.50	8.50	6.6	0.51	0.51

CED-22-002	No significant assays

CED-22-003	168.85	171.90	3.05	2.2	0.61	0.61
	252.30	258.80	6.50	4.8	0.76	0.76
including	253.95	256.90	2.95	2.2	1.07	1.07
	269.55	288.70	19.15	14.4	0.61	0.61
including	283.30	288.70	5.40	4.1	1.31	1.31

CED-22-004	5.00	7.00	2.00	1.0	0.76	0.76
	149.00	157.00	8.00	4.4	0.45	0.45
	168.00	216.00	48.00	27.5	0.39	0.39
including	168.95	173.00	4.05	2.3	1.29	1.29
	244.00	267.00	23.00	13.6	1.34	1.34
including	254.20	261.55	7.35	4.3	3.77	3.77
				0.0
CED-22-005	487.00	504.30	17.30	11.0	1.55	1.55
including	489.00	504.30	15.30	9.7	1.69	1.69
	571.55	575.00	3.45	2.2	0.55	0.55

CED-22-006	311.00	322.40	11.40	6.4	0.33	0.33
	334.90	346.00	11.10	6.3	0.41	0.41
	394.00	440.00	46.00	26.8	0.63	0.63
including	402.00	422.00	20.00	11.6	1.15	1.15
	451.00	477.00	26.00	15.5	1.66	1.66
including	457.00	460.00	3.00	1.8	1.51	1.51
and	465.00	472.90	7.90	4.7	4.20	4.20
	488.00	513.70	25.70	16.3	2.07	2.07
including	488.00	513.00	25.00	15.9	2.10	2.10

CED-22-007	209.30	246.35	37.05	21.6	1.54	1.54
including	213.30	246.35	33.05	19.3	1.67	1.67
	289.00	291.00	2.00	1.2	0.43	0.43
	319.00	321.15	2.15	1.3	0.71	0.71
	367.10	376.00	8.90	5.5	0.60	0.60
	387.75	390.60	2.85	1.8	0.63	0.63
	438.00	440.00	2.00	1.3	0.64	0.64
	446.00	460.50	14.50	9.2	0.58	0.58

CED-22-008	91.95	94.00	2.05	1.4	0.87	0.87
	300.80	312.00	11.20	8.9	0.54	0.54
	387.00	414.90	27.90	22.8	1.14	1.14
including	401.00	414.00	13.00	10.6	2.14	2.14
Intersections calculated above a 0.3 g/t Au cut off with a top cut of 30 g/t Au and a maximum internal waste interval of 10 metres. Bordered intervals are intersections calculated above a 1.0 g/t Au cut off. Intervals in bold are those with a grade thickness factor exceeding 20 gram x metres / tonne gold. True widths are approximate and assume a subvertical body.

Table 2: Location of drill holes in this press release

HOLE	EAST	NORTH	RL	AZIMUTH	DIP	EOH
CED-22-001	681,136	5,386,570	479	337°	-50°	483.0m
CED-22-002	681,420	5,386,640	479	335°	-50°	494.85m
CED-22-003	680,507	5,386,473	481	336°	-50°	360.0m
CED-22-004	680,008	5,386,430	477	155°	-60°	302.8m
CED-22-005	680,559	5,386,340	486	342°	-60°	810.1m
CED-22-006	680,010	5,386,586	475	140°	60°	600.0m
CED-22-007	680,085	5,386,604	473	138°	-59°	657.05m
CED-22-008	680,559	5,386,340	483	340°	-50°	603.0m
Approximate collar coordinates in NAD 83, Zone 15N

Results have been received for eight of the initial 17 holes in the first pass drilling program at East Coldstream. These drillholes tested the existing mineralized lenses, as well as possible eastern and down-dip extensions.

Our work on the mineralization paragenesis and its structural controls has shown that gold mineralization is related to pervasive silica-hematite alteration and sulfide veining associated with an extensional brecciation event following extensive shearing. At the deposit scale, this formed three lenticular bodies within two main shear zones (Figure 1). Based on structural measurements from oriented core, each body has a steeply west-dipping plunge and a gently east-pitching stretching lineation that creates an internal fabric to mineralization (Figure 4). This structural control creates the potential for additional high-grade mineralization to occur below the shallowly drilled portions of the shears zones such as encountered in CED-22-007.

CED-22-001 and -002 tested a similar geophysical feature to the east of the East Coldstream deposit. CED-22-001 was drilled closest to East Coldstream and encountered narrow zones of mineralization, while CED-22-002 was drilled 300 meters further east and did not encounter significant results. This sterilizes the immediate extension, but given the lenticular geometry of mineralization, leaves open the prospectively of the structure further to the east.

CED-22-003 and -004 drilled the North and Main Lenses, respectively. Both holes intersected broad low-grade mineralized zones, including 19.15m @ 0.61 g/t Au from 269.55m in CED-22-003; and 48m @ 0.39 g/t Au from 168m and 23m @ 1.34 g/t Au in CED-22-004.

Holes CED-22-005 to -008 tested down plunge extensions of the known mineralization. All holes intersected variable widths of higher grade mineralization, including 17.3m @ 1.55 g/t Au from 487m in CED-22-005; 20.0m @ 1.15 g/t Au from 402m, 26.0m @ 1.66 g/t Au from 451m, and 25.7m @ 2.07 g/t Au from 488m in CED-22-006; 37.05m @ 1.54 g/t Au from 209.3m in CED-22-007; and 27.9m @ 1.14 g/t Au from 387m in CED-22-008.

Pete Flindell, VP Exploration for Goldshore, said “Our analysis of drill results at East Coldstream confirms the two parallel shear zones that were modelled in the past. The recognition of a greater structural control within these shears has led to the modelling of three steeply dipping lenticular shoots that remain open at depth. A gently dipping internal fabric suggests that mineralization is focused within discrete structures that may allow us to model a higher-grade resource than exists in the historic estimate.”

Analytical and QA/QC Procedures

All samples were sent to ALS Geochemistry in Thunder Bay for preparation and analysis was performed in the ALS Vancouver analytical facility. ALS is accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025. Samples were analyzed for gold via fire assay with an AA finish (“Au-AA23”) and 48 pathfinder elements via ICP-MS after four-acid digestion (“ME-MS61”). Samples that assayed over 10 ppm Au were re-run via fire assay with a gravimetric finish (“Au-GRA21”).

In addition to ALS quality assurance / quality control (“QA/QC”) protocols, Goldshore has implemented a quality control program for all samples collected through the drilling program. The quality control program was designed by a qualified and independent third party, with a focus on the quality of analytical results for gold. Analytical results are received, imported to our secure on-line database and evaluated to meet our established guidelines to ensure that all sample batches pass industry best practice for analytical quality control. Certified reference materials are considered acceptable if values returned are within three standard deviations of the certified value reported by the manufacture of the material. In addition to the certified reference material, certified blank material is included in the sample stream to monitor contamination during sample preparation. Blank material results are assessed based on the returned gold result being less than ten times the quoted lower detection limit of the analytical method. The results of the on-going analytical quality control program are evaluated and reported to Goldshore by Orix Geoscience Inc.

About Goldshore

Goldshore is an emerging junior gold development company, and owns the Moss Lake Gold Project located in Ontario. Wesdome Gold Mines Ltd. (“Wesdome“), is currently a large shareholder of Goldshore with an approximate 27% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Lake Gold Project through the next stages of exploration and development.

About the Moss Lake Gold Project

The Moss Lake Gold Project is located approximately 100 km west of the city of Thunder Bay, Ontario. It is accessed via Highway 11 which passes within 1 km of the property boundary to the north. The Moss Lake Gold Project covers 14,292 hectares and consists of 282 unpatented and patented mining claims.

The Moss Lake Gold Project hosts a number of gold and base metal rich deposits including the Moss Lake Deposit, the East Coldstream Deposit (Table 3), the historically producing North Coldstream Mine (Table 4), and the Hamlin Zone, all of which occur over a mineralized trend exceeding 20 km in length. A historical preliminary economic assessment (the “Moss Lake Historical Estimate“) was completed on the Moss Lake Gold Project in 2013 and published by Moss Lake Gold Mines Ltd. (“Moss Lake Gold Mines“)¹^,³. A historical mineral resource estimate (the “East Coldstream Historical Estimate“) was completed on the East Coldstream Deposit in 2011 by Foundation Resources Inc.^2,3 In addition to these zones, the Moss Lake Gold Project also hosts a number of under-explored mineral occurrences which are reported to exist both at surface and in historically drilled holes. The Moss Lake Deposit is a shear-hosted disseminated-style gold deposit which outcrops at surface. It has been drilled over a 2.5 km length and to depths of 300 m with 376 holes completed between 1983 and 2017. The last drilling program conducted in 2016 and 2017 by Wesdome, which consisted of widely spaced holes along the strike extension of the deposit was successful in expanding the mineralized footprint and hydrothermal system 1.6 km to the northeast. Additionally, the deposit remains largely open to depth. In 2017, Wesdome completed an induced polarization survey which traced the potential extensions of pyrite mineralization associated with the Moss Lake Deposit over a total strike length of 8 km and spanning the entire extent of the survey grids.

The East Coldstream Deposit is a shear-hosted disseminated-style gold deposit which locally outcrops at surface. It has been drilled over a 1.3 km length and to depths of 200 m with 138 holes completed between 1988 and 2017. The deposit remains largely open at depth and may have the potential for expansion along strike. Historic drill hole highlights from the East Coldstream Deposit include 4.86 g/t Au over 27.3 m in C-10-15.

The historically producing North Coldstream Mine is reported to have produced significant amounts of copper, gold and silver⁴ from mineralization with potential iron-oxide-copper-gold deposit style affinity. The exploration potential immediately surrounding the historic mining area is not currently well understood and historic data compilation is required.

The Hamlin Zone is a significant occurrence of copper and gold mineralization, and also of potential iron-oxide-copper-gold deposit style affinity. Between 2008 and 2011, Glencore tested Hamlin with 24 drill holes which successfully outlined a broad and intermittently mineralized zone over a strike length of 900 m. Historic drill hole highlights from the Hamlin Zone include 0.9 g/t Au and 0.35% Cu over 150.7 m in HAM-11-75.

The Moss Lake, East Coldstream and North Coldstream deposits sit on a mineral trend marked by a regionally significant deformation zone locally referred to as the Wawiag Fault Zone in the area of the Moss Lake Deposit. This deformation zone occurs over a length of approximately 20 km on the Moss Lake Gold Project and there is an area spanning approximately 7 km between the Moss Lake and East Coldstream deposits that is significantly underexplored.

Table 3: Historical Mineral Resources^1,2,3

	INDICATED	INFERRED
Deposit	Tonnes	Au g/t	Au oz	Tonnes	Au g/t	Au oz
Moss Lake Historical Estimate
Open Pit Potential	39,795,000	1.1	1,377,300	48,904,000	1.0	1,616,300
Underground Potential	–	–	–	1,461,100	2.9	135,400
Moss Lake Total	39,795,000	1.1	1,377,300	50,364,000	1.1	1,751,600

East Coldstream Historical Estimate
East Coldstream Total	3,516,700	0.85	96,400	30,533,000	0.78	763,276

Combined Total

43,311,700

1.08

1,473,700

80,897,000

0.98

2,514,876

Notes:

Source: Poirier, S., Patrick, G.A., Richard, P.L., and Palich, J. “Technical Report and Preliminary Economic Assessment for the Moss Lake Project”, prepared for Moss Lake Gold Mines Ltd. The qualified persons for the Moss Lake Historical Estimate are Pierre-Luc Richard, MSc, PGeo (InnovExplo Inc), and Carl Pelletier, BSc, PGeo (InnovExplo Inc), and the effective date of the Moss Lake Historical Estimate is February 8, 2013. In-Pit results are presented undiluted and in situ, within Whittle-optimized pit shells. Underground results are presented undiluted and in situ, outside Whittle-optimized pit shells. The Moss Lake Historical Estimate includes 18 gold-bearing zones and 1 envelope containing isolated gold intercepts. Whittle parameters: mining cost = C$2.28; pit slope angle = 50.0 degrees; production cost = C$9.55; mining Dilution = 5%; mining recovery = 95%; processing recovery = 80% to 85%; gold price = C$1,500. In-Pit and Underground resources were compiled at cut-off grades from 0.3 to 5.0 g/t Au (for sensitivity characterization). A cut-off grade of 0.5 g/t Au was selected as the official in-pit cut-off grade and a cut-off grade of 2.0 g/t Au was selected as the official underground cut-off grade. The Moss Lake Historical Estimate is based on 352 diamond drill holes (90,978 m) drilled from 1983 and 2008. A fixed density of 2.78 g/cm3 was used. A minimum true thickness of 5.0 m was applied, using the grade of the adjacent material when assayed or a value of zero when not assayed. Capping was established at 35 g/t Au, supported by statistical analysis and the high grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Gems version 6.4. Based on geostatistics, the ellipse range for interpolation was 75m x 67.5m x 40m. The Indicated category is defined by combining the blocks within the two main zones and various statistical criteria, such as average distance to composites, distance to closest composite, quantity of drill holes within the search area. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.
Source: McCracken, T. “Technical Report and Resource Estimate on the Osmani Gold Deposit, Coldstream Property, Northwestern Ontario”, prepared for Foundation Resources Inc. and Alto Ventures Ltd. The East Coldstream Historical Estimate is based on a 0.4 g/t Au cut-off grade. The qualified persons for the East Coldstream Historical Estimate are Todd McCracken, P.Geo. (Tetratech Wardrop), and Jeff Wilson, Ph.D., P.Geo. (Tetratech Wardrop), and the effective date of the East Coldstream Historical Estimate is December 12, 2011. Resources are presented unconstrained, undiluted and in situ. The East Coldstream Historical Estimate includes 2 gold-bearing zones. A cut-off grade of 0.4 g/t Au was selected as the official resource cut-off grade. The East Coldstream Historical Estimate is based on 116 diamond drill holes drilled from 1986 to 2011. A fixed density of 2.78 g/cm3 was used. Capping was established at 5.89 g/t Au and 5.70 g/t Au for domains EC-1 and EC-2, respectively. This is supported by statistical analysis and the high-grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Datamine Studio 3 version 3.20.5321.0. Recource categorization is based on spatial continuity based from the variography of the assays within the drillholes. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.
The reader is cautioned that the Moss Lake Historical Estimate East and the East Coldstream Historical Estimate (the “Historical Estimates“) are considered historical in nature and as such is based on prior data and reports prepared by previous property owners. The reader is cautioned not to treat them, or any part of them, as current mineral resources or reserves. The Company has determined these historical resources are reliable, and relevant to be included here in that they demonstrate simply the mineral potential of the Moss Lake Gold Project. A qualified person has not done sufficient work to classify the Historical Estimates as current resources and Goldshore is not treating the Historical Estimates as current resources. Significant data compilation, re-drilling, re-sampling and data verification may be required by a qualified person before the Historical Estimates can be classified as a current resource. There can be no assurance that any of the historical mineral resources, in whole or in part, will ever become economically viable. In addition, mineral resources are not mineral reserves and do not have demonstrated economic viability. Even if classified as a current resource, there is no certainty as to whether further exploration will result in any inferred mineral resources being upgraded to an indicated or measured mineral resource category. The Historical Estimates relating to inferred mineral resources were calculated using prior mining industry standard definitions and practices for estimating mineral resource and mineral reserves. Such prior definitions and practices were utilized prior to the implementation of the current standards of the Canadian Institute of Mining for mineral resource estimation, and have a lower level of confidence.

Table 4: Reported Historical Production from the North Coldstream Deposit⁴

Deposit	Tonnes	Cu %	Au g/t	Ag	Cu lbs	Au oz	Ag oz
Historical Production	2,700,0000	1.89	0.56	5.59	102,000,000	44,000	440,000

Note:

Source: Schlanka, R., 1969. Copper, Nickel, Lead and Zinc Deposits of Ontario, Mineral Resources Circular No. 12, Ontario Geological Survey, pp. 314-316.

Peter Flindell, P.Geo., MAusIMM, MAIG, Vice President – Exploration of the Company, a qualified person under NI 43-101 has approved the scientific and technical information contained in this news release.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

For More Information – Please Contact:

Brett A. Richards
President, Chief Executive Officer and Director
Goldshore Resources Inc.

P. +1 604 288 4416 M. +1 905 449 1500
E. brichards@goldshoreresources.com
W. www.goldshoreresources.com

Facebook: GoldShoreRes | Twitter: GoldShoreRes | LinkedIn: goldshoreres

Cautionary Note Regarding Forward-Looking Statements

This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur.

Forward-looking statements in this news release include, among others, statements relating to expectations regarding the exploration and development of the Moss Lake Gold Project, and other statements that are not historical facts. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors and risks include, among others: the Company may require additional financing from time to time in order to continue its operations which may not be available when needed or on acceptable terms and conditions acceptable; compliance with extensive government regulation; domestic and foreign laws and regulations could adversely affect the Company’s business and results of operations; the stock markets have experienced volatility that often has been unrelated to the performance of companies and these fluctuations may adversely affect the price of the Company’s securities, regardless of its operating performance; and the impact of COVID-19.

The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. The Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.

This news release does not constitute an offer to sell, or a solicitation of an offer to buy, any securities in the United States. The securities have not been and will not be registered under the United States Securities Act of 1933, as amended (the “U.S. Securities Act”) or any state securities laws and may not be offered or sold within the United States or to U.S. Persons unless registered under the U.S. Securities Act and applicable state securities laws or an exemption from such registration is available.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/136640

Tags #BrettRichards, #GoldShoreResources, #GSHR, #JuniorMining, #MauriceJackson, #MilesFranklin, #MossLakeProject, #PreciousMetals, #ProvenAndProbable, maurice jackson

Base Metals Emx Royalty Energy Junior Mining Precious Metals Project Generators

EMX Receives initial production royalty payments from Gediktepe

Post author By admin
Post date September 9, 2022

(In U.S. dollars unless otherwise noted)

Vancouver, British Columbia–(Newsfile Corp. – September 9, 2022) – EMX Royalty Corporation (NYSE American: EMX) (TSXV: EMX) (FSE: 6E9) (the “Company” or “EMX”)is pleased to announce the receipt of initial royalty production payments from its Gediktepe royalty property in western Turkey. EMX holds a 10% net smelter return (“NSR”) royalty on oxide gold production at Gediktepe, a newly commissioned mine operated by Polimetal Madencilik Sanayi ve Ticaret A.S. (“Polimetal”), a private Turkish company. EMX has received payments for production from the months of June and July totaling $1,842,452 inclusive of $281,052 in Value Added Tax (“VAT”) for which EMX has credits to recover. These represent the first royalty production payments received from Gediktepe after receiving notice that the definition of commercial production had been satisfied in early June (see EMX News Release dated July 13, 2022).

The June and July payments are based upon the sales of 4,490 ounces of gold and 23,309 ounces of silver in June and 4,030 ounces of gold and 44,164 ounces of silver in July. It should be noted that the payment for June was pro-rated for the portion of the month’s sales that took place after the satisfaction of the definition of commercial production in the royalty agreement, which took place on June 8.

In addition to the oxide gold royalty, EMX also owns a 2% NSR royalty on production from an underlying polymetallic copper, zinc, lead and gold deposit that is slated for future development.

Polimetal had informed EMX earlier in 2022 that it expects to produce between 35,000 and 45,000 ounces of gold per year from Gediktepe (with additional contributions from silver production) while mining the oxide gold cap over the next 3-4 years. The production proceeds received for June and July production are consistent with those projections. The Gediktepe royalty is the subject of a NI 43-101 technical report authored by Dama Engineering with an effective date of February 1, 2022. This technical report has been filed on SEDAR under the Company’s profile and contains historical mining reserve and mineral resource estimates.

Gediktepe VMS Deposit: The Gediktepe volcanogenic massive sulfide (“VMS”) deposit is a polymetallic system with precious metal, copper, and zinc rich domains. The upper portion of the deposit is oxidized, forming a precious metal-enriched gossanous cap that will be mined first, followed by production from the underlying polymetallic sulfide deposit.

Gediktepe was discovered in 2012 by a joint venture between Alacer Gold Corporation (which merged with SSR in 2020) and Lidya Madencilik Sanayi ve Ticaret A.S. (“Lidya”), a private Turkish company. Alacer Gold Corp later converted its 50% joint venture interest at Gediktepe into the royalty interests now owned by EMX. Polimetal is a wholly owned subsidiary of Lidya and serves as the operator for the Gediktepe project.

More information on the Gediktepe royalty asset can be found at www.EMXroyalty.com.

Dr. Eric P. Jensen, CPG, a Qualified Person as defined by National Instrument 43-101 and employee of the Company, has reviewed, verified and approved the disclosure of the technical information contained in this news release.

About EMX. EMX is a precious, base and battery metals royalty company. EMX’s investors are provided with discovery, development, and commodity price optionality, while limiting exposure to risks inherent to operating companies. The Company’s common shares are listed on the NYSE American Exchange and the TSX Venture Exchange under the symbol EMX, and also trade on the Frankfurt exchange under the symbol “6E9”. Please see www.EMXroyalty.com for more information.

For further information contact:

David M. Cole
President and Chief Executive Officer
Phone: (303) 973-8585
Dave@emxroyalty.com

Scott Close
Director of Investor Relations Phone: (303) 973-8585
SClose@emxroyalty.com

Isabel Belger
Investor Relations (Europe)
Phone: +49 178 4909039
IBelger@EMXroyalty.com

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements

This news release may contain “forward looking statements” that reflect the Company’s current expectations and projections about its future results. These forward-looking statements may include statements regarding perceived merit of properties, exploration results and budgets, mineral reserve and resource estimates, work programs, capital expenditures, timelines, strategic plans, market prices for precious and base metal, or other statements that are not statements of fact. When used in this news release, words such as “estimate,” “intend,” “expect,” “anticipate,” “will”, “believe”, “potential”, “go forward” and similar expressions are intended to identify forward-looking statements, which, by their very nature, are not guarantees of the Company’s future operational or financial performance, and are subject to risks and uncertainties and other factors that could cause the Company’s actual results, performance, prospects or opportunities to differ materially from those expressed in, or implied by, these forward-looking statements. These risks, uncertainties and factors may include, but are not limited to: unavailability of financing, failure to identify commercially viable mineral reserves, fluctuations in the market valuation for commodities, difficulties in obtaining required approvals for the development of a mineral project, increased regulatory compliance costs, expectations of project funding by joint venture partners and other factors.

Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this news release or as of the date otherwise specifically indicated herein. Due to risks and uncertainties, including the risks and uncertainties identified in this news release, and other risk factors and forward-looking statements listed in the Company’s MD&A for the quarter ended June 30, 2022 (the “MD&A”) and the most recently filed Annual Information Form (the “AIF”) for the year ended December 31, 2021, actual events may differ materially from current expectations. More information about the Company, including the MD&A, the AIF and financial statements of the Company, is available on SEDAR at www.sedar.com and on the SEC’s EDGAR website at www.sec.gov.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/136416

Tags #EMX, #InvestingInBatteryMetals, #InvestingInCopper, #JuniorMining, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, #RickRule, David Cole, EMX Royalty, proven and probable

Junior Mining Lion One Metals Precious Metals Uncategorized

Lion One Announces New High-Grade, Near-Surface Gold in Drill Results from Phase 2 Infill Program at Tuvatu, Fiji

Post author By admin
Post date September 8, 2022

North Vancouver, British Columbia–(Newsfile Corp. – September 8, 2022) – Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) (“Lion One” or the “Company”) is pleased to announce the results from 20 additional drill holes, as part of ongoing infill drilling at its high-grade, fully permitted Tuvatu Alkaline Gold Project in Fiji.

Drill results for 20 holes totalling approximately 3,900m of diamond drilling in Zone 5 cover a portion of the Tuvatu gold project, part of the Navilawa volcanic caldera which is host to numerous gold occurrences. outcropping mineralization, as well as the high-grade Tuvatu Alkaline gold deposit.

The drill program represents a significant improvement to the extent of known mineralization; additions are highlighted in blue in Table 1. The main orebody (Figure 1), is scheduled to enter production in Q2 of 2023. Its dimensions and continuity are further defined and expanded with the infill program which adds to the 11 earlier holes in Zone 5 (Lion One news release: May 31, 2022). The additional data outlines high-grade to bonanza-grade mineralized lode swarms <100m from surface. Vein-hosted mineralization remains open along strike and at depth. Lion One is upgrading its resource model which is expected to be significantly improved by this round of drill results. The mineralization reported here is a significant development which is expected to upgrade the resource model, as it represents a critical addition of gold mineralisation to the resources model that grades well above the average resource grade, at relatively shallow levels. As a result, the newly identified mineralization will enhance the economic model, likely upgrading the production stream at Tuvatu.

Top Intercepts include:

20.59 g/t Au over 3.9m from 98.4-102.3m, including 52.89 g/t Au over 1.5m, including 171.5 g/t Au over 0.3m, and 79.18 g/t Au over 0.3m from TUG-144
12.22 g/t Au over 3.3m from 54.9-58.2m, including 32.08 g/t Au over 0.6m, 24.08 g/t Au over 0.6m from TUG-143
56.90 g/t Au over 1.8m from 144.6-146.4m, including 163.19 g/t Au over 0.6m from TUDDH-604
35.98 g/t Au over 1.8m from 53.0-54.8m, including 194.00 g/t Au over 0.3m from TUDDH-609
9.13 g/t Au over 3.3m from 60.3-63.6m, including 44.85 g/t Au over 0.6m from TUG-146, as well as 8.15 g/t Au over 5.1m from 97.5-102.6m, including 19.70 g/t Au over 1.8m from 99.3-101.7 including 13.28 g/t Au over 0.6, 11.73 g/t Au over 0.6m, and 34.08 g/t Au over 0.6m also from TUG-146
9.33 g/t Au over 1.5m from 10.5-12.0m, including 37.42 g/t Au over 0.3m from TUG-144
7.14 g/t Au over 3.0m from 107.5-110.5m, including 28.56 g/t Au over 0.3m, 10.54 g/t Au over 0.3m, and 28.74 g/t Au over 0.3m from TUDDH-591
6.80 g/t Au over 4.2m from 92.1-96.3m including 10.39 g/t Au over 0.3m, 24.57 g/t Au over 0.6m, and 9.62 g/t Au over 0.6m from TUDDH-596
17.85 g/t Au over 0.6m from 127.9-128.5m including 26.79 g/t Au over 0.3m, 5.52 g/t Au over 2.7m from 161.8-164.5m incl. 36.81 g/t Au over 0.3m from TUDDH-605

https://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522ctopid%2522%253A%25221542500%253B1480989%253B1481489%2522%252C%2522hashtag%2522%253A%25221542500%253B1480989%253B1481489%2522%252C%2522wiki_topics%2522%253A%2522Exploration_diamond_drilling%253BLion%2522%252C%2522lmsid%2522%253A%2522a0V0W00000HOPDcUAP%2522%252C%2522revsp%2522%253A%2522newsfile_64%2522%252C%2522lpstaid%2522%253A%2522467d0cc8-0df1-31ff-81a2-a2369a566e12%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D

Results are summarized below in Table 1, with vertical sections including all of the newly reported drill holes presented as Figures 2-8. Highlighted in blue on Table 1 are drill intercepts outside of the mineralized lodes that define the existing resource model. Each additional intercept will likely add width, grade, and continuity to the resource in the near-surface portion of the Tuvatu orebody.

Lion One Drilling Programs in Progress
Lion One reports that in addition to its Zone 5 infill drilling it is progressing with deep extensional drilling on the 500 Zone, where TUDDH-608, targeting the high-grade intersection of TUG-141 and TUDD-601, has been terminated at a depth of 678.1m. Visible veining and sulphide mineralization has been recorded from approximately ~530m to 645m depth along the drill hole. Assay results for TUDDH-608 have been commissioned from the Lion One Lab with preliminary results expected soon. Drilling on TUG-147 from the underground decline, targeting the same dilational zone further to the north and deeper has also commenced this week.

The Company has also mobilized a drill rig 2km northeast of Tuvatu to test the Batiri Creek occurrence, the new regional discovery in the Navilawa Caldera (see news release dated August 29, 2022), and underground development continues toward the near-surface Zone 2 of the Tuvatu resource with the No. 2 decline having advanced >80m. Finally, results from a separate batch of 6 PQ diameter diamond drill holes aimed at collecting a 300 kg composite sample for metallurgical testing of Zone 2 mineralization have also been received and compiled. The company will continue to provide further progress updates and results on these activities.

Lion One CEO, Walter Berukoff, stated, “We are confident that the high-grade intercepts indicated by our infill programs and the increased drilling density will lead to a more robust resource model. The high-grade near-surface infill results, along with the continuing success of the deep-drilling program, underscores the potential of Tuvatu to be a multi-million-ounce, high-grade Au producer. Lion One is well positioned to continue advancing all three tiers of our exploration strategy: ongoing, near-surface infill drilling; extensions of deep, high-grade feeder targets, and from our pipeline of regional targets in the surrounding Navilawa caldera.”

Infill Drilling Program
Two phases of infill drilling have been planned at Tuvatu with the aim of infilling areas within the current resource and thus augmenting the data density, to further improve the resolution of the geological model in portions of the deposit scheduled for earliest production. Phase 1 infill drilling was completed over Zone 2 (Figure 1) in mid-February 2022, adding over 8,400m of new data from drill core, including 7,475m of new drilling and 955m of sampling of previously unsampled historic drill core (see Feb. 23, 2022 News Release).

This release presents final assay data from 20 previously unreported drill holes completed as part of the Phase 2 infill program, which is planned for approximately 8,200m of diamond drilling from surface and underground, and which is aimed at upgrading the resource database in Zone 5 of the Tuvatu orebody. The Phase 2 program as planned includes 30 holes totalling 5,475m carried out from 4 separate drill stations at surface, and 35 holes totalling 2,695m carried out from 6 underground drill stations. Phase 2 infill drill program began February 17, 2022, with drill hole TUDDH-577, and is expected to require 8-9 months of drilling using three rigs (two from surface and one from underground) to complete.

Results from the initial approximately 6,200m of drilling in Zone 5, represent approximately 75% of the planned program total, indicating and indeed confirming consistent high-grade to locally bonanza-grade Au mineralization for known mineralized lodes in this portion of the current resource, as well as new high-grade mineralization that was not identified prior to this drill program (Table 1, highlighted), and therefore not included in the current resource model.

Numerous high-grade mineralized intervals occur outside of existing modelled lodes. These notably include 35.98 g/t Au over 1.8m which includes a bonanza grade intercept of 194.00 g/t Au from a downhole depth of only 53.0m in hole TUDDH-609, as well as 19.70 g/t Au over 1.8m from only 99.3m downhole depth in hole TUG-146. These additional near-surface intercepts will add significantly to the overall inventory of high-grade mineralization slated for early production at Tuvatu.

Figure 1: A) Oblique view looking N060° and down 17° showing the current conceptual mine plan ore panels (gold) highlighting the location of Zone 2 and Zone 5, the exploration decline (yellow) and the planned Zone 5 infill drilling program (blue). The planned drilling consists of 4 surface and 6 underground drill stations. B) Oblique view looking N060° and down 40° showing the UR1 to UR5, URW1A, URW1C, and URW3 lodes (transparent grey), exploration decline (yellow) and the planned Zone 5 infill drilling program (blue).

Cannot view Figure 1? Visit:
https://images.newsfilecorp.com/files/2178/136388_figure1.jpg

Cannot view Figure 2? Visit:
https://images.newsfilecorp.com/files/2178/136388_figure2.jpg

Cannot view Figure 3? Visit:
https://images.newsfilecorp.com/files/2178/136388_figure3.jpg

Cannot view Figure 4? Visit:
https://images.newsfilecorp.com/files/2178/136388_figure4.jpg

Cannot view Figure 5? Visit:
https://images.newsfilecorp.com/files/2178/136388_figure5.jpg

Cannot view Figure 6? Visit:
https://images.newsfilecorp.com/files/2178/136388_figure6.jpg

Cannot view Figure 7? Visit:
https://images.newsfilecorp.com/files/2178/136388_figure7.jpg

Figures 2-8: Composite vertical sections through Zone 5 at Tuvatu, showing the UR1 to UR5, URW1A, URW2A, and URW3 lodes (labelled) and the traces of the infill drilling reported in this release (drill holes are labelled). Grade legend is as follows: orange = >3g/t Au; red = >10 g/t Au; magenta = >30 g/t Au. All figures are at the same scale with views as indicated.

Cannot view Figure 8? Visit:
https://images.newsfilecorp.com/files/2178/136388_figure8.jpg

Table 1: Drilling intervals returning >0.5 g/t Au (intervals > 3.0 g/t Au cutoff are shown in red, and intervals >9.0 g/t Au or longer than 1.2m are bolded). Intercepts that are outside of the current geological model are highlighted in light blue.

Hole ID	From (m)	To (m)	Interval (m)	Grade (g/t Au)
TUDDH-589	19.1	19.4	0.3	0.91
	85.1	85.4	0.3	0.81
	89.6	91.4	1.8	1.44
	113	113.6	0.6	17.33
	170.9	171.2	0.3	7.36
	209.3	209.6	0.3	0.96
	210.8	224	13.2	3.79
Incl.	213.2	213.5	0.3	17.03
Incl.	213.8	214.1	0.3	7.85
Incl.	215.6	215.9	0.3	7.17
Incl.	216.5	216.8	0.3	11.41
Incl.	218	218.3	0.3	33.30
Incl.	222.5	222.8	0.3	7.21
Incl.	223.7	224	0.3	15.34

TUDDH-591	73.4	74.0	0.6	1.04
	102.3	102.6	0.3	9.28
	103.7	104.6	0.9	0.93
	106.1	106.6	0.5	2.01
	107.5	110.5	3.0	7.14
Incl.	107.5	107.8	0.3	28.56
Incl.	108.1	108.4	0.3	10.54
Incl.	109.0	109.3	0.3	28.74
	112.0	112.6	0.6	0.73
	113.2	113.5	0.3	0.84
	117.7	118.6	0.9	2.02
	126.3	127.8	1.5	1.29
	129.0	130.2	1.2	0.65
	132.9	134.1	1.2	0.88
	142.7	143.6	0.9	1.71

TUDDH-592	14.6	14.9	0.3	1.83
	18.5	18.8	0.3	0.55
	75.2	75.5	0.3	0.55
	101.6	102.2	0.6	15.24
	147.5	148.7	1.2	0.74
	158.9	159.2	0.3	7.76
	184.1	184.7	0.6	8.32
Incl.	184.4	184.7	0.3	10.36

TUDDH-593	9.9	11.7	1.8	4.49
Incl.	10.5	11.1	0.6	8.98
	28.2	29.4	1.2	0.54
	34.5	34.8	0.3	0.69
	88.5	89.7	1.2	4.31
	140.1	140.4	0.3	3.50
	152.7	154.2	1.5	0.78
	168.9	170.4	1.5	1.42

TUDDH-594	105.0	105.3	0.3	13.10
	189.9	191.1	1.2	8.01
	195.0	195.3	0.3	1.80
	203.4	207.6	4.2	0.85
	203.4	203.7	0.3	3.67

TUDDH-595	54.9	56.1	1.2	0.64
	112.2	112.8	0.6	0.85
	114.0	114.3	0.3	80.65
	121.8	123.9	2.1	1.61
	190.2	191.1	0.9	2.20
	194.4	194.7	0.3	3.75
	201.3	201.6	0.3	1.31
	209.7	211.5	1.8	1.88
	213.6	213.9	0.3	2.18
	224.4	225.9	1.5	1.46
	234.9	235.5	0.6	0.52
	236.7	238.2	1.5	3.19
	247.5	247.8	0.3	1.10

TUDDH-596	77.1	77.4	0.3	0.8
	88.8	91.2	2.4	1.35
	92.1	96.3	4.2	6.8
Incl.	92.1	92.4	0.3	10.39
Incl.	93.3	93.9	0.6	24.57
Incl.	94.8	95.4	0.6	9.62
	102.3	102.9	0.6	7.77

TUDDH-597	91.1	91.7	0.6	1.24
	137.9	138.5	0.6	8.59
Incl.	137.9	138.2	0.3	16.50
	152.9	153.5	0.6	1.37
	176.6	178.4	1.8	0.81
	189.5	190.4	0.9	0.55
	194.9	195.8	0.9	8.89

TUDDH-598	96.7	97	0.3	0.84
	139.6	140.5	0.9	1.85
	144.1	144.7	0.6	9.19
	170.2	173.8	3.6	4.68
Incl.	170.2	170.5	0.3	12.89
Incl.	171.4	172.6	1.2	8.37
	209.5	209.8	0.3	0.65

TUDDH-600	65	65.3	0.3	0.55
	73.4	77	3.6	2.66
Incl.	74	74.3	0.3	5.75
Incl.	74.9	75.2	0.3	10.95
	78.8	79.4	0.6	0.96
	147.8	148.7	0.9	1.26

TUDDH-602	127.4	127.7	0.3	2.73
	152	153.2	1.2	0.79
	182.3	182.6	0.3	1.03
	209.6	210.5	0.9	3.12
Incl.	210.2	210.5	0.3	7.45
	214.4	214.7	0.3	1.10
	225.2	225.5	0.3	7.12

TUDDH-603	28.7	30.5	1.8	1.64

TUDDH-604	84.6	84.9	0.3	0.64
	144.6	146.4	1.8	56.90
Incl.	144.6	145.2	0.6	163.19
	167.1	170.7	3.6	8.75
Incl.	167.1	167.7	0.6	45.36

TUDDH-605	127.9	128.5	0.6	17.85
Incl.	127.9	128.2	0.3	26.79
Incl.	128.2	128.5	0.3	8.90
	157.6	158.5	0.9	4.10
Incl.	158.2	158.5	0.3	10.21
	161.8	164.5	2.7	5.52
Incl.	164.2	164.5	0.3	36.81
	190	190.6	0.6	1.21
	193.9	194.5	0.6	0.71
	197.2	199	1.8	0.64
	201.1	201.7	0.6	2.05
	214	214.3	0.3	1.09

TUDDH-606	66.0	66.6	0.6	0.88
	98.4	98.7	0.3	1.00

TUDDH-609	53.0	54.8	1.8	35.98
Incl.	53.9	54.2	0.3	194.0
Incl.	54.2	54.8	0.6	9.32

TUG-143	14.7	15.3	0.6	2.96
	17.1	17.7	0.6	0.89
	30.3	30.9	0.6	0.93
	32.4	33.0	0.6	1.29
	54.9	58.2	3.3	12.22
Incl.	54.9	55.5	0.6	32.08
Incl.	57	57.6	0.6	24.08
Incl.	57.6	58.2	0.6	8.82
	60.9	61.2	0.3	17.23
	66.6	67	0.4	2.26
	67.8	68.4	0.6	1.24
	71.1	73.2	2.1	0.86
	74.4	74.7	0.3	7.19
	80.4	80.7	0.3	2.2
	89.4	89.7	0.3	8.48

TUG-144	6.9	8.4	1.5	6.82
Incl.	6.9	7.5	0.6	8.07
Incl.	7.5	7.8	0.3	9.77
	10.5	12.0	1.5	9.33
Incl.	11.1	11.4	0.3	37.42
	30.6	31.5	0.9	4.25
Incl.	30.6	31.2	0.6	5.77
	43.5	43.8	0.3	0.9
	45.6	45.9	0.3	0.9
	51	51.6	0.6	0.95
	52.8	54	1.2	2.03
	64.2	66.6	2.4	0.81
	68.4	69.9	1.5	3.93
Incl.	68.4	68.7	0.3	8.35
Incl.	69.6	69.9	0.3	11.08
	75.3	76.2	0.9	1.83
	77.7	78.3	0.6	0.78
	84.3	86.7	2.4	1.52
	93.9	95.1	1.2	8.3
Incl.	93.9	94.5	0.6	12.48
	98.4	102.3	3.9	20.59
Incl.	98.4	99.9	1.5	52.89
which includes	98.4	98.7	0.3	11.35
and	99.0	99.3	0.3	171.5
and	99.6	99.9	0.3	79.18
	103.8	106.8	3.0	4.76
Incl.	104.4	104.9	0.5	17.11
Incl.	105.3	105.9	0.6	5.80
	115.5	115.8	0.3	0.64
	119.1	121.5	2.4	1.46

TUG-146	3.3	3.6	0.3	3.86
	10.8	11.4	0.6	1.73
	12.9	13.5	0.6	6.30
	38.4	39.3	0.9	5.48
Incl.	38.4	38.7	0.3	10.97
	60.3	63.6	3.3	9.13
Incl.	60.3	60.9	0.6	44.85
	68.4	70.8	2.4	1.41
	97.5	102.6	5.1	8.15
which includes	99.3	101.7	1.8	19.70
Incl.	99.3	99.9	0.6	13.28
and	99.9	100.5	0.6	11.73
and	101.1	101.7	0.6	34.08
	105	109.5	4.5	3.95
Incl.	106.5	107.1	0.6	8.29
Incl.	107.7	108	0.3	7.62
	110.7	111	0.3	9.37
	111.9	113.1	1.2	1.44
	114.3	119.4	5.1	2.76
Incl.	115.5	115.8	0.3	8.27
	144.3	145.2	0.9	5.59
Incl.	144.3	144.6	0.3	14.63

Table 2: Survey details of diamond drill holes referenced in this release

Hole No	Coordinates (Fiji map grid)	RL	final depth	dip	azimuth
	N	E		m		(TN)
TUDDH-589	1876513	3920435	348.5	266.6	-65	255
TUDDH-591	1876442	3920520	314.0	149.3	-65	297
TUDDH-592	1876513	3920435	348.6	221.6	-55	220
TUDDH-593	1876513	3920435	348.6	224.4	-45	220
TUDDH-594	1876527	3920502	309.6	239.3	-45	200
TUDDH-595	1876527	3920502	309.6	265.9	-56	225
TUDDH-596	1876442	3920520	314.0	132.0	-55	297
TUDDH-597	1876527	3920502	309.6	227.3	-42	200
TUDDH-598	1876527	3920502	309.6	296.3	-52	280
TUDDH-600	1876442	3920519	311.1	150.8	-71	251
TUDDH-602	1876530	3920503	309.8	251.4	-54	275
TUDDH-603	1876529	3920503	309.8	234.6	-40	290
TUDDH-604	1876529	3920503	309.9	212.4	-45	291
TUDDH-605	1876530	3920503	309.7	254.5	-57	288
TUDDH-606	1876442	3920519	311.1	142.5	-65	249
TUDDH-609	1876442	3920519	311.4	in progress	-54	250
TUG-142	3920486	1876411	102.0	85.8	-12	090
TUG-143	3920486	1876412	103.7	97.7	+30	087
TUG-144	3920486	1876411	101.3	156.3	-40	089
TUG-146	3920486	1876411	101.3	163.9	-45	089

Qualified Person
In accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”), Sergio Cattalani, P.Geo, Senior Vice President Exploration, is the Qualified Person for the Company and has reviewed and is responsible for the technical and scientific content of this news release.

QAQC Procedures
Lion One adheres to rigorous QAQC procedures above and beyond basic regulatory guidelines in conducting its sampling, drilling, testing, and analyses. The Company utilizes its own fleet of diamond drill rigs, using PQ, HQ and NQ sized drill core rods. Drill core is logged and split by Lion One personnel on site. Samples are delivered to and analysed at the Company’s geochemical and metallurgical laboratory in Fiji. Duplicates of all samples with grades above 0.5 g/t Au are both re-assayed at Lion One’s lab and delivered to ALS Global Laboratories in Australia (ALS) for check assay determinations. All samples for all high-grade intercepts are sent to ALS for check assays. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10.00 g/t Au are then re-analysed by gravimetric method. For samples that return greater than 0.50 g/t Au, repeat fire assay runs are carried out and repeated until a result is obtained that is within 10% of the original fire assay run. For samples with multiple fire assay runs, the average of duplicate runs is presented. Lion One’s laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples are sent to ALS labs in Townsville QLD and are analysed by the same methods (Au-AA26, and Au-GRA22 where applicable). ALS also analyses for 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES (method ME-ICP61).

About Lion One Metals Limited
Lion One’s flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One’s CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.

On behalf of the Board of Directors of
Lion One Metals Limited
“Walter Berukoff“
Chairman and CEO

For further information
Contact Investor Relations
Toll Free (North America) Tel: 1-855-805-1250
Email: info@liononemetals.com
Website: www.liononemetals.com

Neither the TSX Venture Exchange nor its Regulation Service Provider
accepts responsibility for the adequacy or accuracy of this release.

This press release may contain statements that may be deemed to be “forward-looking statements” within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward-looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “proposed”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Limited’s current beliefs and is based on information currently available to Lion One Metals Limited and on assumptions Lion One Metals Limited believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Limited or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Limited, general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Limited has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Limited does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/136388

Tags #JuniorMining, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, #Tuvatu, #WalterBerukoff, LIO, Lion One Metals, Quinton Hennigh

Junior Mining Labrador Gold Precious Metals

Labrador Gold Announces 2.02 G/T Au Over 32 Metres at Big Vein the Longest Mineralized Intersection at Kingsway to Date

Post author By admin
Post date September 8, 2022

Figure 1.

Plan map of significant Big Vein intercepts.

Figure 2.

Figure 3.

Plan map of Kingsway Gold occurrences showing latest drill intersections.

Hole K-22-177 intersected 2.02 g/t Au over 32 metres including 18.08 g/t Au over 0.63 metres and 11.42 g/t Au over 1.05 metres.
Mineralization at Big Vein remains open along strike to the southwest and northeast.
Drilling also intersected high-grade mineralization at Big Vein southwest grading 12.84 g/t Au over 0.8 metres.

https://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522ctopid%2522%253A%25221542500%253B1577000%2522%252C%2522hashtag%2522%253A%25221542500%253B1577000%2522%252C%2522wiki_topics%2522%253A%2522Metre%253BGold%2522%252C%2522lmsid%2522%253A%2522a0770000002m0AbAAI%2522%252C%2522revsp%2522%253A%2522globenewswire.com%2522%252C%2522lpstaid%2522%253A%25220cd2451e-b4ce-3a12-b41f-c1743ac34d4a%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D

TORONTO, Sept. 08, 2022 (GLOBE NEWSWIRE) — Labrador Gold Corp. (TSX.V:LAB | OTCQX:NKOSF | FNR: 2N6) (“LabGold” or the “Company”) is pleased to announce results from recent drilling targeting the prospective Appleton Fault Zone over a 12km strike length. The drilling is part of the Company’s ongoing 100,000 metre diamond drilling program at its 100% owned Kingsway Project.

Highlights of the drilling include an intersection of 2.02 g/t Au over 32 metres from 134 metres that included 18.08 g/t Au over 0.63 metres and 11.42 g/t Au over 1.05 metres in Hole K-22-177 from the north end of Big Vein. The intersection is approximately 75 metres north of the discovery outcrop. In addition, Hole K-22-187 at Big Vein southwest intersected 12.84 g/t Au over 0.8 metres from 341 metres.

The last results from initial drilling at Midway showed an intersection of 5.69 g/t Au over 1.33 metres in Hole K-22-171. Further drilling is planned at Midway to test the continuity of gabbro-hosted mineralization along strike towards Cracker.

“Drilling at Big Vein continues to deliver excellent results with the longest mineralized intersection of 32 metres grading 2.02 g/t gold drilled on the property to date. We are currently testing this intersection down dip. The intersection is approximately 30 metres north of another long intercept of 6.07 g/t Au over 19m in hole K-21-111.” said Roger Moss, President and CEO. “Big Vein has now been drilled over a strike length of approximately 520 metres and remains open both to the northeast and southwest. Two rigs continue drilling at Big Vein to test for extensions of the mineralization in both directions.”

Hole ID	From (m)	To (m)	Interval (m)	Au (g/t)	Zone
K-22-187	157.80	158.25	1.20	1.08	Big Vein SW
	328.55	328.85	0.30	3.27
	341.00	341.80	0.80	12.84
K-22-184	140.26	140.59	0.33	2.89	Big Vein SW
	336.25	337.89	1.64	2.69
K-22-180	nsv				CSAMT
K-22-179	72.00	72.76	0.76	1.08	Golden Glove
K-22-178	nsv				Big Vein SW
K-22-177	8.00	9.00	1.00	1.01	Big Vein
	93.74	94.55	0.81	1.11
	134.00	166.00	32.00	2.02
including	142.77	143.40	0.63	18.08
and	158.95	160.00	1.05	11.42
	212.00	215.00	3.00	2.63
	245.00	248.00	3.00	3.60
	265.00	266.00	1.00	1.73
K-22-176	nsv				Golden Glove
K-22-175	63.00	65.00	2.00	1.48	Big Vein
	230.00	232.00	2.00	2.87
K-22-174	296.00	297.49	1.49	3.65	Big Vein SW
	407.00	407.30	0.30	3.24
K-22-173	11.00	12.00	1.00	1.04	Big Vein
	16.00	17.00	1.00	1.38
	50.00	51.00	1.00	2.23
K-22-172	nsv				CSAMT
K-22-171	194.50	198.00	3.50	1.44	Midway
	201.17	202.50	1.33	5.69
K-22-170	11.00	12.00	1.00	1.10	HTC
	35.00	44.00	9.00	1.42
	218.00	219.00	1.00	1.01
K-22-169	nsv				Golden Glove
K-22-168	165.91	166.21	0.30	1.01	Midway
	217.90	218.40	0.50	1.82
K-22-167	57.00	62.00	5.00	1.90	Big Vein
K-22-166	nsv				Midway
K-22-165	243.00	244.00	1.00	1.05	Golden Glove

Table 1. Summary of assay results. All intersections are downhole length
as there is insufficient Information to calculate true width.

A total of 52,648 metres have been drilled to date out of the planned 100,000 metre program. Assays are pending for samples from approximately 3,343 metres of core (11% of the total submitted).

Drilling at Kingsway continues with four drill rigs, two working at Big Vein, one at Golden Glove and one at the CSAMT target. Ongoing detailed till sampling and prospecting continues to generate new drill targets along the Appleton Fault Zone and the gabbro trend north and south of Midway. Drilling will begin on these targets once initial drilling at CSAMT is complete.

The Company has $23.6 million in cash and is well funded to carry out the remaining 47,000 metres of the planned drill program as well as further target generation on the property.

Hole ID	Easting	Northing	Elevation	Azimuth	Dip	Total depth
K-22-187	661343.8	5434926	44.151	130	50	374
K-22-184	661343.9	543496.4	44.481	130	45	428
K-22-180	666592.3	5443605	46.42	140	45	278
K-22-179	660543	5431776	45.79	320	45	401
K-22-178	661343	5434926	44.352	140	50	404
K-22-177	661594	5435327	45.7	145	50	826
K-22-176	660541	5431776	45.857	290	45	401
K-22-175	661598	5435287	51.683	120	57.5	308
K-22-174	661343.3	5434926	44.289	140	45	476
K-22-173	661599.9	5435287	51.001	120	55	93
K-22-172	666591.7	5443606	46.42	310	45	278
K-22-171	661254.7	5437924	78.349	140	45	247
K-22-170	661599.9	5435286	51.096	120	45	299
K-22-169	660627.7	5431879	44.55	280	55	401.44
K-22-168	661255.8	5437937	77.432	310	45	264.75
K-22-167	661599.3	5435286	51.32	130	55	296
K-22-166	661202.7	5437880	77.473	140	45	260
K-22-165	660626	5431881	44.596	280	45	398

Table 2. Drill hole collar details

Figure 1. Plan map of significant Big Vein intercepts.
https://www.globenewswire.com/NewsRoom/AttachmentNg/c8630deb-d718-4e9f-bf3d-5431d3789e05

Figure 2. Long section of Big Vein/HTC Zone.
https://www.globenewswire.com/NewsRoom/AttachmentNg/74f1199d-6502-4981-bbfd-7719fb00b48d

Figure 3. Plan map of Kingsway Gold occurrences showing latest drill intersections.
https://www.globenewswire.com/NewsRoom/AttachmentNg/ea032cde-0026-4147-b1c6-b71481e1db5c

QA/QC

True widths of the reported intersections have yet to be calculated. Assays are uncut. Samples of HQ split core are securely stored prior to shipping to Eastern Analytical Laboratory in Springdale, Newfoundland for assay. Eastern Analytical is an ISO/IEC17025 accredited laboratory. Samples are routinely analyzed for gold by standard 30g fire assay with atomic absorption finish as well as by ICP-OES for an additional 34 elements. Samples containing visible gold are assayed by metallic screen/fire assay, as are any samples with fire assay results greater than 1g/t Au. The company submits blanks and certified reference standards at a rate of approximately 5% of the total samples in each batch.

Qualified Person

Roger Moss, PhD., P.Geo., President and CEO of LabGold, a Qualified Person in accordance with Canadian regulatory requirements as set out in NI 43-101, has read and approved the scientific and technical information that forms the basis for the disclosure contained in this release.

The Company gratefully acknowledges the Newfoundland and Labrador Ministry of Natural Resources’ Junior Exploration Assistance (JEA) Program for its financial support for exploration of the Kingsway property.

About Labrador Gold
Labrador Gold is a Canadian based mineral exploration company focused on the acquisition and exploration of prospective gold projects in Eastern Canada.

Labrador Gold’s flagship property is the 100% owned Kingsway project in the Gander area of Newfoundland. The three licenses comprising the Kingsway project cover approximately 12km of the Appleton Fault Zone which is associated with gold occurrences in the region, including those of New Found Gold immediately to the south of Kingsway. Infrastructure in the area is excellent located just 18km from the town of Gander with road access to the project, nearby electricity and abundant local water. LabGold is drilling a projected 100,000 metres targeting high-grade epizonal gold mineralization along the Appleton Fault Zone with encouraging results. The Company has approximately $23.6 million in working capital and is well funded to carry out the planned program.

The Hopedale property covers much of the Florence Lake greenstone belt that stretches over 60 km. The belt is typical of greenstone belts around the world but has been underexplored by comparison. Work to date by Labrador Gold show gold anomalies in rocks, soils and lake sediments over a 3 kilometre section of the northern portion of the Florence Lake greenstone belt in the vicinity of the known Thurber Dog gold showing where grab samples assayed up to 7.8g/t gold. In addition, anomalous gold in soil and lake sediment samples occur over approximately 40 km along the southern section of the greenstone belt (see news release dated January 25^th 2018 for more details). Labrador Gold now controls approximately 40km strike length of the Florence Lake Greenstone Belt.

The Company has 169,189,979 common shares issued and outstanding and trades on the TSX Venture Exchange under the symbol LAB.

For more information please contact:

Roger Moss, President and CEO Tel: 416-704-8291

Or visit our website at: www.labradorgold.com

Twitter: @LabGoldCorp

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements: This news release contains forward-looking statements that involve risks and uncertainties, which may cause actual results to differ materially from the statements made. When used in this document, the words “may”, “would”, “could”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” and similar expressions are intended to identify forward-looking statements. Such statements reflect our current views with respect to future events and are subject to risks and uncertainties. Many factors could cause our actual results to differ materially from the statements made, including those factors discussed in filings made by us with the Canadian securities regulatory authorities. Should one or more of these risks and uncertainties, such as actual results of current exploration programs, the general risks associated with the mining industry, the price of gold and other metals, currency and interest rate fluctuations, increased competition and general economic and market factors, occur or should assumptions underlying the forward looking statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, or expected. We do not intend and do not assume any obligation to update these forward-looking statements, except as required by law. Shareholders are cautioned not to put undue reliance on such forward-looking statements.

Tags ##RogerMoss, #JuniorMining, #KingswayProject, #LAB, #LabradorGold, #MauriceJackson, #ProvenAndProbable

Gold Shore Resources Junior Mining

Goldshore Intersects 29.05m @ 2.99 g/t Au in 100m Down-dip Step-out

Post author By admin
Post date September 8, 2022

Vancouver, British Columbia–(Newsfile Corp. – September 8, 2022) – Goldshore Resources Inc. (TSXV: GSHR) (OTCQB: GSHRF) (FSE: 8X00) (“Goldshore” or the “Company“), is pleased to announce assay results from its ongoing 100,000-meter drill program at the Moss Lake Project in Northwest Ontario, Canada (the “Moss Lake Gold Project“).

Highlights:

Results for eight holes, drilled to infill historic but poorly surveyed drill sections in the Main Zone, have confirmed high-grade gold mineralization within a large volume of well mineralized diorite with best intercepts of:
- 29.05m @ 2.99 g/t Au from 478.6m depth in MMD-22-045, including
  - 13.5m @ 6.08 g/t Au from 481.25m
- 16.4m @ 1.87 g/t Au from 415.6m depth in MMD-22-033, including
  - 6.65m @ 4.09 g/t Au from 416.15m
- 5.85m @ 3.47 g/t Au from 110m depthin MMD-22-034
- 17.0m @ 1.44 g/t Au from 58m depth in MMD-22-039, including
  - 14.45m @ 1.63 g/t Au from 58.55m
- 18.0m @ 1.43 g/t Au from 354m depth, including
  - 6.7m @ 3.37 g/t Au from 365.3m
- 22.65m @ 1.59 g/t Au from 344.15m depth in MMD-22-040
The better intercepts are all centered around twelve very high-grade gold zones that represent the axis of the shear network, including:
- 1.0m @ 22.0 g/t Au from 418m in MMD-22-033,
- 1.0m @ 17.7 g/t Au from 349m in MMD-22-040, and
- 0.75m @ 88.6 g/t Au from 481.25m in MMD-22-045

President and CEO Brett Richards stated: “We continue to intersect wide zones of +1 g/t Au mineralization that underpin our belief that the Moss Lake Deposit has potential to develop an initial high-grade phase 1 open pit within the larger low-grade open pit operation. It can be seen that the projected grade shell of +1.0 g/t Au is significant at this early stage, and we will look to expand upon these exploration results, as we continue with our program.”

Technical Overviewhttps://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522lmsid%2522%253A%2522a0V0W00000HOPDcUAP%2522%252C%2522revsp%2522%253A%2522newsfile_64%2522%252C%2522lpstaid%2522%253A%25222d23faf1-9aa7-3d36-91a9-6957e504a569%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D

The Goldshore team has obtained sufficient quality drill information, along with oriented core data, to generate working models of the grade distribution using implicit modelling algorithms. These show coherent high grade structural zones that reflect the three dimensional anastomosing shear network, which are projected to surface in the following figures.

Table 1 shows the significant intercepts. Table 2 and Figure 1 show the drill hole locations. Figure 2 shows the better intercepts and Figure 3 is a typical section through holes MMD-22-040 and -045.

Figure 1: Drill plan showing drill holes relative to implicit modelled grade shells

To view an enhanced version of Figure 1, please visit:
https://images.newsfilecorp.com/files/8051/136351_3655ebd0342589e4_002full.jpg

Figure 2: Drill plan showing best of several +1 g/t Au intercepts relative to implicit modelled grade shells

To view an enhanced version of Figure 2, please visit:
https://images.newsfilecorp.com/files/8051/136351_3655ebd0342589e4_003full.jpg

Figure 3: Drill section through MMD-22-040 and -045 relative to implicit modelled grade shells

To view an enhanced version of Figure 3, please visit:
https://images.newsfilecorp.com/files/8051/136351_3655ebd0342589e4_004full.jpg

Table 1: Significant downhole gold intercepts

HOLE ID	FROM	TO	LENGTH (m)	TRUE WIDTH (m)	CUT GRADE (g/t Au)	UNCUT GRADE (g/t Au)
MMD-22-033	32.00	36.00	4.00	2.0	3.08	3.08
	69.00	72.40	3.40	1.7	0.54	0.54
	99.10	115.60	16.50	8.3	0.63	0.63
including	100.00	105.00	5.00	2.5	1.64	1.64
	257.25	265.35	8.10	4.2	0.58	0.58
	372.65	379.00	6.35	3.3	1.16	1.16
including	372.65	375.00	2.35	1.2	2.07	2.07
	415.60	432.00	16.40	8.6	1.87	1.87
including	416.15	422.80	6.65	3.5	4.09	4.09
	453.00	461.45	8.45	4.5	0.66	0.66
	518.70	521.00	2.30	1.2	0.69	0.69
	541.00	543.00	2.00	1.1	0.32	0.32
	581.00	603.90	22.90	12.3	0.65	0.65
including	588.00	591.00	3.00	1.6	2.13	2.13
and	598.00	602.00	4.00	2.1	1.05	1.05

MMD-22-034	13.00	17.00	4.00	2.3	0.33	0.33
	41.15	56.75	15.60	9.0	0.40	0.40
	69.30	72.70	3.40	2.0	0.44	0.44
	110.00	115.85	5.85	3.4	3.47	3.47
including	111.90	115.85	3.95	2.3	4.87	4.87
	131.65	134.90	3.25	1.9	0.56	0.56
	148.50	155.00	6.50	3.8	2.42	2.42
including	148.80	155.00	6.20	3.6	2.51	2.51
	173.00	193.15	20.15	11.6	0.55	0.55
	210.65	213.25	2.60	1.5	0.57	0.57

MMD-22-037	386.10	388.10	2.00	1.1	0.49	0.49
	422.00	428.95	6.95	3.7	0.61	0.61
	566.60	570.40	3.80	2.1	0.55	0.55
	627.70	632.50	4.80	2.6	0.33	0.33

MMD-22-038	82.00	84.00	2.00	1.0	0.45	0.45
	129.00	134.00	5.00	2.6	0.34	0.34
	204.00	206.00	2.00	1.0	0.38	0.38
	211.00	216.00	5.00	2.6	0.32	0.32
	315.00	317.00	2.00	1.1	0.53	0.53
	329.00	434.00	105.00	58.3	0.43	0.43
including	331.80	339.00	7.20	4.0	2.45	2.45
and	372.00	374.25	2.25	1.2	1.01	1.01
and	420.80	425.60	4.80	2.7	1.30	1.30
	460.55	465.55	5.00	2.8	0.57	0.57
	501.45	526.00	24.55	14.2	0.65	0.65
including	507.50	519.05	11.55	6.7	1.05	1.05
	546.40	552.70	6.30	3.7	0.49	0.49

MMD-22-039	15.00	18.00	3.00	1.4	1.20	1.20
	28.60	38.50	9.90	4.8	0.42	0.42
	58.00	75.00	17.00	8.1	1.44	1.44
including	58.55	73.00	14.45	6.9	1.63	1.63
	106.50	110.00	3.50	1.7	0.42	0.42
	279.00	281.00	2.00	1.0	0.50	0.50
	285.00	295.35	10.35	5.0	0.33	0.33
	311.80	314.00	2.20	1.1	0.32	0.32
	354.00	372.00	18.00	8.8	1.43	1.43
including	365.30	372.00	6.70	3.3	3.37	3.37
	412.50	439.40	26.90	13.6	0.33	0.33
	468.00	472.00	4.00	2.1	1.15	1.15
	508.00	510.00	2.00	1.0	0.33	0.33
	512.00	514.00	2.00	1.1	0.35	0.35
	557.00	570.55	13.55	7.2	0.61	0.61
including	557.00	562.00	5.00	2.6	1.33	1.33

MMD-22-040	75.55	91.65	16.10	5.7	0.40	0.40
	166.90	169.45	2.55	0.9	0.46	0.46
	263.00	269.00	6.00	2.2	0.45	0.45
	319.45	377.50	58.05	21.8	0.86	0.86
including	344.15	366.80	22.65	8.5	1.59	1.59
	403.00	420.50	17.50	6.7	0.34	0.34
	457.50	467.75	10.25	4.0	0.51	0.51
	539.00	602.00	63.00	24.7	0.42	0.42

MMD-22-044	13.35	24.50	11.15	7.9	1.39	1.39
including	13.35	24.50	11.15	7.9	1.39	1.39
	130.20	151.00	20.80	14.9	0.97	0.97
including	138.80	142.30	3.50	2.5	4.37	4.37
	250.20	253.35	3.15	2.3	0.38	0.38
	256.30	349.35	93.05	68.2	0.49	0.49
including	260.80	268.45	7.65	5.6	2.26	2.26
and	293.80	296.25	2.45	1.8	2.00	2.00
and	330.90	334.25	3.35	2.5	1.75	1.75
	370.70	372.90	2.20	1.6	0.30	0.30

MMD-22-045	16.00	28.00	12.00	6.9	0.54	0.54
	62.50	66.00	3.50	2.0	0.41	0.41
	109.60	111.80	2.20	1.3	0.92	0.92
	189.70	192.00	2.30	1.4	1.03	1.03
	204.40	232.00	27.60	16.6	0.32	0.32
	243.00	310.50	67.50	41.1	0.44	0.44
including	256.70	258.70	2.00	1.2	2.04	2.04
and	292.10	299.25	7.15	4.3	1.27	1.27
	326.85	337.20	10.35	6.4	0.64	0.64
including	334.30	337.20	2.90	1.8	1.06	1.06
	365.25	367.75	2.50	1.6	0.71	0.71
	387.65	423.00	35.35	22.2	0.48	0.48
including	405.30	412.00	6.70	4.2	1.25	1.25
	433.65	441.50	7.85	4.9	0.31	0.31
	478.60	507.65	29.05	18.2	1.48	2.99
including	481.25	494.75	13.50	8.5	2.83	6.08
	562.00	567.35	5.35	3.4	0.40	0.40
	583.50	594.00	10.50	6.6	0.57	0.57
	656.00	697.00	41.00	26.2	0.70	0.70
including	660.00	669.25	9.25	5.9	1.88	1.88
Intersections calculated above a 0.3 g/t Au cut off with a top cut of 30 g/t Au and a maximum internal waste interval of 10 metres. Bordered intervals are intersections calculated above a 1.0 g/t Au cut off. Intervals in bold are those with a grade thickness factor exceeding 20 gram x metres / tonne gold. True widths are approximate and assume a subvertical body.

Table 2: Location of drill holes in this press release

HOLE	EAST	NORTH	RL	AZIMUTH	DIP	EOH
MMD-22-033	669,348	5,379,506	427	152°	-62°	675.25m
MMD-22-034	668,868	5,379,279	441	155°	-56°	236.9m
MMD-22-037	668,587	5,379,078	430	154°	-59°	654m
MMD-22-038	669,160	5,379,417	428	154°	-59°	602m
MMD-22-039	669,256	5,379,456	429	155°	-60°	605m
MMD-22-040	668,790	5,379,260	438	153°	-70°	609m
MMD-22-043	668,791	5,379,259	438	155°	-55°	22m
MMD-22-045	668,815	5,379,285	435	165°	-54°	717m
Approximate collar coordinates in NAD 83, Zone 15N

Results have been received for eight holes that have infilled areas of the Main Zone that are between sections drilled by historic holes with collar survey problems. As a result, they will replace the low-confidence historic holes in the upcoming resource model update.

MMD-22-043 was terminated early as it hit the old underground exploration decline. MMD-22-045 was drilled at slightly different azimuth to intersect the volume targeted by hole -043.

As with the historic holes, these holes intersected several broad zones of low-grade mineralization within the altered diorite intrusion host. Examples include 105m @ 0.43 g/t Au from 329m depth and 63.0m @ 0.42 g/t Au from 539m depth in MMD-22-038; 58.05m @ 0.86 g/t Au from 319.45m depth in MMD-22-040; 20.8m @ 0.97 g/t Au from 130.2m depth and 93.05m @ 0.49 g/t Au from 256.3m depth in MMD-22-044; and 67.5m @ 0.44 g/t Au from 243m depth and 41.0m @ 0.70 g/t Au from 656m depth in MMD-22-045.

All these low-grade zones occur as envelopes to higher-grade structures that form a three-dimensional, anastomosing shear network that has developed in response to strain on the altered diorite intrusion. Results include the broad zones of +1 g/t Au mineralization shown in the highlights (e.g., 29.05m @ 2.99 g/t Au from 478.6m depth in MMD-22-045) and several narrow high-grade intervals, including 0.5m @ 18.5 g/t Au from 34m and 1.0m @ 22.0 g/t Au from 418m in MMD-22-033; 0.6m @ 21.0 g/t Au from 113.4m in MMD-22-034; 0.9m @ 10.6 g/t Au from 332.85m in MMD-22-038; 0.4m @ 25.2 g/t Au from 366.2m in MMD-22-039; 1.0m @ 17.7 g/t Au from 349m in MMD-22-040; 0.35m @ 10.3 g/t Au from 261.95m and 0.55m @ 10.6 g/t Au from 395.7m in MMD-22-042; 0.5m @ 15.2 g/t Au from 24m, 1.0m @ 12.3 g/t Au from 138.8m and 0.85m @ 15.6 g/t Au from 260.8m in MMD-22-044; and 0.75m @ 88.6 g/t Au from 481.25m in MMD-22-045.

Geological modelling of the altered diorite host rock and anastomosing shear network has commenced. It will continue for the next three months as we continue with our campaigns of active drilling and relogging of historic drill core. The final model will enable the interpolation of low and high-grade gold populations within constraining wireframes, which should provide a more accurate estimation of the gold distribution and, therefore, the contained gold resource.

Pete Flindell, VP Exploration for Goldshore, said, “These drill results confirm the excellent results that we are receiving from our 100,000-meter drill program. All results received to date confirm our improved understanding of geological controls, which shows grade decreasing away from a network of anastomosing shears. This has enabled us to more accurately model high-grade gold zones within the deposit using an implicit modelling algorithm.”

Analytical and QA/QC Procedures

All samples were sent to ALS Geochemistry in Thunder Bay for preparation and analysis was performed in the ALS Vancouver analytical facility. ALS is accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025. Samples were analyzed for gold via fire assay with an AA finish (“Au-AA23“) and 48 pathfinder elements via ICP-MS after four-acid digestion (“ME-MS61“). Samples that assayed over 10 ppm Au were re-run via fire assay with a gravimetric finish (“Au-GRA21“).

About Goldshore

Goldshore is an emerging junior gold development company, and owns the Moss Lake Gold Project located in Ontario. Wesdome Gold Mines Ltd. is currently a large shareholder of Goldshore with an approximate 27% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Lake Gold Project through the next stages of exploration and development.

About the Moss Lake Gold Project

The Moss Lake Gold Project hosts a number of gold and base metal rich deposits including the Moss Lake Deposit, the East Coldstream Deposit (Table 3), the historically producing North Coldstream Mine (Table 4), and the Hamlin Zone, all of which occur over a mineralized trend exceeding 20 km in length. A historical preliminary economic assessment (the “Moss Lake Historical Estimate“) was completed on the Moss Lake Gold Project in 2013 and published by Moss Lake Gold Mines Ltd. (“Moss Lake Gold Mines“)¹^,³. A historical mineral resource estimate (the “East Coldstream Historical Estimate“) was completed on the East Coldstream Deposit in 2011 by Foundation Resources Inc.^2,3 In addition to these zones, the Moss Lake Gold Project also hosts a number of under-explored mineral occurrences which are reported to exist both at surface and in historically drilled holes. The Moss Lake Deposit is a shear-hosted disseminated-style gold deposit which outcrops at surface. It has been drilled over a 2.5 km length and to depths of 300 m with 376 holes completed between 1983 and 2017. The last drilling program conducted in 2016 and 2017 by Wesdome Gold Mines Ltd. (“Wesdome“), which consisted of widely spaced holes along the strike extension of the deposit was successful in expanding the mineralized footprint and hydrothermal system 1.6 km to the northeast. Additionally, the deposit remains largely open to depth. In 2017, Wesdome completed an induced polarization survey which traced the potential extensions of pyrite mineralization associated with the Moss Lake Deposit over a total strike length of 8 km and spanning the entire extent of the survey grids.

Table 3: Historical Mineral Resources^1,2,3

	INDICATED	INFERRED
Deposit	Tonnes	Au g/t	Au oz	Tonnes	Au g/t	Au oz
Moss Lake Historical Estimate
Open Pit Potential	39,795,000	1.1	1,377,300	48,904,000	1.0	1,616,300
Underground Potential	–	–	–	1,461,100	2.9	135,400
Moss Lake Total	39,795,000	1.1	1,377,300	50,364,000	1.1	1,751,600

East Coldstream Historical Estimate
East Coldstream Total	3,516,700	0.85	96,400	30,533,000	0.78	763,276

Combined Total

43,311,700

1.08

1,473,700

80,897,000

0.98

2,514,876

Notes:

(1) Source: Poirier, S., Patrick, G.A., Richard, P.L., and Palich, J. “Technical Report and Preliminary Economic Assessment for the Moss Lake Project”, prepared for Moss Lake Gold Mines Ltd. The qualified persons for the Moss Lake Historical Estimate are Pierre-Luc Richard, MSc, PGeo (InnovExplo Inc), and Carl Pelletier, BSc, PGeo (InnovExplo Inc), and the effective date of the Moss Lake Historical Estimate is February 8, 2013. In-Pit results are presented undiluted and in situ, within Whittle-optimized pit shells. Underground results are presented undiluted and in situ, outside Whittle-optimized pit shells. The Moss Lake Historical Estimate includes 18 gold-bearing zones and 1 envelope containing isolated gold intercepts. Whittle parameters: mining cost = C$2.28; pit slope angle = 50.0 degrees; production cost = C$9.55; mining Dilution = 5%; mining recovery = 95%; processing recovery = 80% to 85%; gold price = C$1,500. In-Pit and Underground resources were compiled at cut-off grades from 0.3 to 5.0 g/t Au (for sensitivity characterization). A cut-off grade of 0.5 g/t Au was selected as the official in-pit cut-off grade and a cut-off grade of 2.0 g/t Au was selected as the official underground cut-off grade. The Moss Lake Historical Estimate is based on 352 diamond drill holes (90,978 m) drilled from 1983 and 2008. A fixed density of 2.78 g/cm3 was used. A minimum true thickness of 5.0 m was applied, using the grade of the adjacent material when assayed or a value of zero when not assayed. Capping was established at 35 g/t Au, supported by statistical analysis and the high grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Gems version 6.4. Based on geostatistics, the ellipse range for interpolation was 75m x 67.5m x 40m. The Indicated category is defined by combining the blocks within the two main zones and various statistical criteria, such as average distance to composites, distance to closest composite, quantity of drill holes within the search area. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.

(2) Source: McCracken, T. “Technical Report and Resource Estimate on the Osmani Gold Deposit, Coldstream Property, Northwestern Ontario”, prepared for Foundation Resources Inc. and Alto Ventures Ltd. The East Coldstream Historical Estimate is based on a 0.4 g/t Au cut-off grade. The qualified persons for the East Coldstream Historical Estimate are Todd McCracken, P.Geo. (Tetratech Wardrop), and Jeff Wilson, Ph.D., P.Geo. (Tetratech Wardrop), and the effective date of the East Coldstream Historical Estimate is December 12, 2011. Resources are presented unconstrained, undiluted and in situ. The East Coldstream Historical Estimate includes 2 gold-bearing zones. A cut-off grade of 0.4 g/t Au was selected as the official resource cut-off grade. The East Coldstream Historical Estimate is based on 116 diamond drill holes drilled from 1986 to 2011. A fixed density of 2.78 g/cm3 was used. Capping was established at 5.89 g/t Au and 5.70 g/t Au for domains EC-1 and EC-2, respectively. This is supported by statistical analysis and the high grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Datamine Studio 3 version 3.20.5321.0. Resource categorization is based on spatial continuity based from the variography of the assays within the drillholes. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.

(3) The reader is cautioned that the Moss Lake Historical Estimate East and the East Coldstream Historical Estimate (the “Historical Estimates“) are considered historical in nature and as such is based on prior data and reports prepared by previous property owners. The reader is cautioned not to treat them, or any part of them, as current mineral resources or reserves. The Company has determined these historical resources are reliable, and relevant to be included here in that they demonstrate simply the mineral potential of the Moss Lake Gold Project. A qualified person has not done sufficient work to classify the Historical Estimates as current resources and Goldshore is not treating the Historical Estimates as current resources. Significant data compilation, re-drilling, re-sampling and data verification may be required by a qualified person before the Historical Estimates can be classified as a current resource. There can be no assurance that any of the historical mineral resources, in whole or in part, will ever become economically viable. In addition, mineral resources are not mineral reserves and do not have demonstrated economic viability. Even if classified as a current resource, there is no certainty as to whether further exploration will result in any inferred mineral resources being upgraded to an indicated or measured mineral resource category. The Historical Estimates relating to inferred mineral resources were calculated using prior mining industry standard definitions and practices for estimating mineral resource and mineral reserves. Such prior definitions and practices were utilized prior to the implementation of the current standards of the Canadian Institute of Mining for mineral resource estimation, and have a lower level of confidence.

Table 4: Reported Historical Production from the North Coldstream Deposit⁴

Deposit	Tonnes	Cu %	Au g/t	Ag	Cu lbs	Au oz	Ag oz
Historical Production	2,700,0000	1.89	0.56	5.59	102,000,000	44,000	440,000

Note:^:

(4) Source: Schlanka, R., 1969. Copper, Nickel, Lead and Zinc Deposits of Ontario, Mineral Resources Circular No. 12, Ontario Geological Survey, pp. 314-316.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

For More Information – Please Contact:

Brett A. Richards
President, Chief Executive Officer and Director
Goldshore Resources Inc.
P. +1 604 288 4416 M. +1 905 449 1500
E. brichards@goldshoreresources.com
W. www.goldshoreresources.com

Facebook: GoldShoreRes | Twitter: GoldShoreRes | LinkedIn: goldshoreres

Cautionary Note Regarding Forward-Looking Statements

This news release contains statements that constitute “forward-looking statements.” Such forward looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/136351

Tags #BrettRichards, #GoldShoreResources, #JuniorMining, #MauriceJackson, #MossLakeProject, #PreciousMetals, #ProvenAndProbable, GSHR, maurice jackson, proven and probable

Base Metals

Bravo Continues to Intersect High-Grade PGM’s and Ni Sulphide at Luanga

Post author By admin
Post date September 7, 2022

Highlights include 16.9m @ 2.82g/t PGM + Au, plus 0.23% Ni Sulphide, and

13.6m @ 2.67g/t PGM + Au, plus 0.23% Ni Sulphide

VANCOUVER, BC, Sept. 7, 2022 /CNW/ – Bravo Mining Corp. (TSX.V: BRVO), (“Bravo” or the “Company“) today announced that it has received assay results from a further twelve infill diamond drill holes (“DDH”), from its wholly owned Luanga PGM (palladium + platinum + rhodium) + gold + nickel project (“Luanga“), located in the Carajás Mineral Province, state of Pará, Brazil. Samples for a further 34 drill holes (including 18 re-assay holes) are already at the laboratory for analysis with results pending. Both downhole and surface electromagnetic (“EM”) programs are also underway to follow up on the previously announced massive sulphide intercept.

“The infill drilling and historic core re-assay programs continue to advance rapidly. As we receive more assay results, we continue to see results comparable to the historic grades and thicknesses, increasing our confidence in the prior work completed at Luanga,” said Luis Azevedo, Chairman and CEO of Bravo. “The Company is also following up on the recently discovered nickel and copper massive sulphide mineralization that had not been previously identified at Luanga. Downhole EM assisted with the placement of the two follow-up holes (results pending) and the design for drilling on the next drill section. Surface EM will also start shortly, which we hope will greatly assist in vectoring-in and following these potential feeder zone(s).”

Highlights

Assay results from infill drilling continue to compare well with the drill holes on their neighbouring historic drill sections in both tenor and mineralized thicknesses.
Highlights of Bravo’s recent intercepts are tabulated below, with details attached:

HOLE-ID	From(m)	To(m)	Thickness (m)	Pd(g/t)	Pt(g/t)	Rh(g/t)	Au (g/t)	Ni % (Sulphide)	PGM + Au (g/t)	TYPE
DDH22LU005	93.0	124.0	31.0	1.19	0.59	0.09	0.11	0.16	1.98	FR
DDH22LU018	90.8	107.7	16.9	1.60	0.89	0.22	0.10	0.23	2.82	FR
DDH22LU019	0.0	64.2	64.2	0.58	0.29	0.04	0.07	NA	0.99	Ox/FR
*Including*	50.6	64.2	13.6	1.58	0.80	0.14	0.16	0.22	2.67	FR

Notes:	All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole.
	Given the orientation of the holes and the mineralization, the intercepts are estimated to range from ~75 to 95% of true thickness.
	Type: Ox = Oxide. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization.
	NA: Not Applicable as intercept is oxide or a mix of oxide and fresh rock mineralization.

Additional results from historic drill hole re-assaying are expected in the following weeks.
Downhole (DH) Transient Electromagnetic (TEM) survey completed on previously reported (August 16^rd, 2022 news release) high-grade Ni/Cu massive sulphide hole DDH22LU047;
Following DHTEM, two new drill holes on the same section have been completed (results pending);
Drilling on the next section to the north is expected to start soon; and
Surface Fixed Loop TEM (FLTEM) surveying is expected to commence shortly.
67 drill holes have been completed, for a total of 11,091 metres (or 43% of Phase 1 Drilling Program), including 5 twin holes and 6 metallurgical holes.
9,621 samples submitted for assay to date including 2,943 re-assay samples from historic drill core.
6 drill rigs operating onsite.

Luanga Drill Program

The Phase 1 diamond drill program continues as planned at Luanga. With six drill rigs on site, drilling is now progressing in various locations along the entire 7km strike length of the known Luanga mineralized envelope (defined by historic drilling), including to the north where high-grade massive sulphide nickel/copper mineralization was intersected (see August 16^rd, 2022 news release). DHTEM has been completed on this hole (see picture below), and two more drill holes have been completed on the same drill section (results pending), with two more holes about to commence on the section to the north. Surface FLTEM surveying is expected to start soon, to the south of the massive sulphide intercept. To date, 67 DDH have been completed for a total of 11,091m from the planned 25,500m Phase 1 drill program.

Phase 1 drilling is primarily designed to confirm, infill, and step out from the previously defined PGM+Au+Ni mineralization in order to increase confidence in the geological model and provide the basis for future mineral resource estimates. Additionally, drilling will target potential extensions to the mineralization at depth and, given the more recent discovery of massive sulphides, evaluate the potential of this new style of mineralization.

Commencement of DHTEM Surveying at Luanga – DDH22LU049 (CNW Group/Bravo Mining Corp.)

Location of Bravo Drilling Reported in this Document (CNW Group/Bravo Mining Corp.)

Complete Table of Assay Results

HOLE-ID	From(m)	To(m)	Thickness (m)⁽¹⁾	Pd(g/t)	Pt(g/t)	Rh(g/t)	Au (g/t)	Ni % (Sulphide)	PGM + Au (g/t)	TYPE
DDH22LU005	93.0	124.0	31.0	1.19	0.59	0.09	0.11	0.16	1.98	FR
DDH22LU009	47.6	62.4	14.8	1.01	0.55	0.08	0.02	0.20	1.67	FR
DDH22LU010	29.7	33.0	3.3	0.71	0.45	0.13	0.01	0.08	1.30	FR
And	47.9	55.0	7.1	0.65	0.33	0.05	0.01	0.08	1.04	FR
And	64.0	73.1	9.1	0.77	0.35	0.06	0.01	0.10	1.19	FR
And	87.4	98.4	11.0	0.60	0.34	0.06	0.01	0.08	1.02	FR
DDH22LU011	84.2	88.2	4.0	0.98	0.46	0.09	0.03	0.14	1.56	FR
DDH22LU012	No Significant Result
DDH22LU013	0.0	5.9	5.9	0.49	0.30	0.05	0.01	NA	0.86	Ox
And	98.9	EOH	1.3	1.01	0.18	0.05	001	0.13	1.25	FR
DDH22LU014	25.3	31.7	6.4	0.77	0.29	0.05	0.01	NA	1.12	Ox
And	43.4	61.4	18.0	0.55	0.22	0.04	0.03	0.09	0.83	FR
And	66.0	70.0	4.0	0.85	0.32	0.05	0.02	0.14	1.23	FR
And	81.0	90.0	9.0	0.89	0.35	0.05	0.02	0.15	1.31	FR
And	102.0	111.6	9.6	1.07	0.39	0.06	0.03	0.08	1.55	FR
DDH22LU015	0.0	28.0	28.0	0.31	0.14	0.02	0.04	NA	0.52	Ox
And	57.8	71.0	13.2	0.59	0.23	0.05	0.01	0.36	0.88	FR
And	88.5	100.5	12.0	0.25	0.13	0.02	0.03	0.31	0.42	FR
DDH22LU017	0.0	11.2	11.2	0.81	0.47	0.09	0.02	NA	1.39	Ox
And	18.2	23.2	5.0	0.52	0.51	0.08	0.01	NA	1.12	Ox
And	85.9	88.9	3.0	1.15	0.44	0.06	0.01	0.05	1.66	FR
And	126.0	141.0	15.0	1.22	0.54	0.10	0.08	0.17	1.95	FR
DDH22LU018	59.9	71.9	12.0	0.55	0.26	0.08	0.04	0.19	0.93	FR
And	90.8	107.7	16.9	1.60	0.89	0.22	0.10	0.23	2.82	FR
DDH22LU019	0.0	64.2	64.2	0.58	0.29	0.04	0.07	NA	0.99	Ox/FR
Including	50.6	64.2	13.6	1.58	0.80	0.14	0.16	0.22	2.67	FR
And	74.2	78.8	4.6	0.60	0.52	0.07	0.02	0.10	1.21	FR
DDH22LU020	0.0	9.0	9.0	1.38	0.52	0.10	0.02	NA	2.02	Ox
And	13.0	31.7	18.7	0.98	0.38	0.07	0.04	NA	1.46	Ox/FR
And	55.4	117.4	62.0	0.35	0.25	0.01	0.01	0.01	0.61	FR

Notes:	All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole.
	Given the orientation of the holes and the mineralization, the intercepts are estimated to range from ~75 to 95% of true thickness.
	Type: Ox = Oxide. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization.
	NA: Not Applicable as intercept is oxide or a mix of oxide and fresh rock mineralization.

About Bravo Mining Corp.

Bravo is a Canada and Brazil-based mineral exploration and development company focused on advancing its Luanga PGM + Au + Ni Project in the world-class Carajás Mineral Province of Brazil.

The Luanga Project benefits from being in a location close to operating mines, with excellent access and proximity to existing infrastructure, including road, rail and clean and renewable hydro grid power. The project area was previously de-forested for agricultural grazing land. Bravo’s current Environmental, Social and Governance activities includes replanting trees in the project area, hiring and contracting locally, and ensuring protection of the environment during its exploration activities.

Bravo was founded by a management team and board with extensive Brazilian and PGM exploration, permitting, project financing, construction and operating experience. This includes Luis Azevedo, Executive Chairman & CEO; Simon Mottram, President; Alex Penha, EVP Corporate Development; and Independent Directors, Dr. Nicole Adshead-Bell (Lead Director), Stuart Comline, Tony Polglase and Stephen Quin.

Technical Disclosure

Technical information in this news release has been reviewed and approved by Simon Mottram, F.AusIMM (Fellow Australia Institute of Mining and Metallurgy), President of Bravo Mining Corp. who serves as the Company’s “qualified person”, as defined in National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101“). Mr. Mottram has verified the technical data and opinions contained in this news release.

Forward Looking Statements

This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as “expectations”, “confirm”, “hope”, “potential”, “designed”, “increase confidence”, “interpreted”, “pending”, and other similar words, phrases or statements that certain events or conditions “should”, or “will” occur. In particular, this news release contains forward-looking information pertaining to the Company’s ongoing re-assay and drill programs and the results thereof; the expected arrival of geophysical equipment and the results of such surveys; the potential for the definition o new styles of mineralization and extensions to depth and the Company’s plans in respect thereof. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, environmental risks, limitations on insurance coverage; and other risks and uncertainties involved in the mineral exploration and development industry. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including, but not limited to, the assumption that the assay results confirm the interpreted mineralization contains significant values of nickel, copper and also contain PGMs and Au; final drill and assay results will be in line with management’s expectations; that activities will not be adversely disrupted or impeded by regulatory, political, community, economic, environmental and/or healthy and safety risks; that the Luanga Project will not be materially affected by potential supply chain disruptions; and general business and economic conditions will not change in a materially adverse manner. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.

Schedule 1: Drill Hole Collar Details

HOLE-ID	Company	East (m)	North (m)	RL (m)	Datum	Depth (m)	Azimuth	Dip

DDH22LU005	Bravo	657399.97	9339804.76	259.36	SIRGAS2000 UTM22S	152.35	360.00	-60.00
DDH22LU009	Bravo	659101.84	9341075.30	232.45	SIRGAS2000 UTM22S	200.50	360.00	-60.00
DDH22LU010	Bravo	659852.14	9341580.93	221.61	SIRGAS2000 UTM22S	160.25	330.00	-60.00
DDH22LU011	Bravo	659028.75	9341007.34	241.87	SIRGAS2000 UTM22S	100.20	330.00	-60.00
DDH22LU012	Bravo	659850.54	9341825.16	255.78	SIRGAS2000 UTM22S	200.10	330.00	-60.00
DDH22LU013	Bravo	659938.89	9341630.21	219.39	SIRGAS2000 UTM22S	151.10	90.00	-60.00
DDH22LU014	Bravo	656999.90	9339580.01	270.50	SIRGAS2000 UTM22S	100.15	330.00	-60.00
DDH22LU015	Bravo	659925.01	9341825.05	265.24	SIRGAS2000 UTM22S	151.35	360.00	-60.00
DDH22LU017	Bravo	659913.93	9341673.10	231.91	SIRGAS2000 UTM22S	199.05	90.00	-60.00
DDH22LU018	Bravo	659164.67	9341072.65	235.07	SIRGAS2000 UTM22S	150.30	330.00	-60.00
DDH22LU019	Bravo	659924.98	9341725.04	239.05	SIRGAS2000 UTM22S	150.25	330.00	-60.00
DDH22LU020	Bravo	657000.03	9339654.43	288.60	SIRGAS2000 UTM22S	150.00	330.00	-60.00

Schedule 2: Assay Methodologies and QAQC

Samples follow a chain of custody between collection, processing and delivery to the ALS laboratory in Parauapebas, state of Pará, Brazil. The drill core is delivered to the core shack at Bravo’s Luanga site facilities and processed by geologists who insert certified reference materials, blanks and duplicates into the sampling sequence. Drill core is half cut and placed in secured polyurethane bags, then in security-sealed sacks before being delivered directly from the Luanga site facilities to the Parauapebas ALS laboratory by Bravo staff. Additional information about the methodology can be found on the ALS global website (ALS) in the analytical guides.

Quality Assurance and Quality Control (“QAQC“) is maintained internally at the lab through rigorous use of internal certified reference materials, blanks, and duplicates. An additional QAQC program is administered by Bravo using certified reference materials, duplicate samples and blank samples that are blindly inserted into the sample batch. If a QAQC sample returns an unacceptable value an investigation into the results is triggered and when deemed necessary, the samples that were tested in the batch with the failed QAQC sample are re-tested.

Bravo ALS
Preparation	Method	Method	Method	Method

For All Elements	Pt, Pd, Au	Rh	Ni-Sulphide	Trace Elements
PREP-31B	PGM-ICP27	Rh-MS25	Ni-ICP05	ME-ICP61

www.bravomining.com (CNW Group/Bravo Mining Corp.)

SOURCE Bravo Mining Corp.

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/September2022/07/c5634.html

Tags #JuniorMining, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, BravoMining, Investing In Platinum, Luis Azevedo, platinum, proven and probable

Base Metals Diamcor Mining Junior Mining

Diamcor Announces Strong Tender and Sales Results Including 59.35 Carat Special Gem Diamond

Post author By admin
Post date September 7, 2022

Diamcor Mining Inc.Diamcor Mining Inc.Wed, September 7, 2022 at 9:00 AMIn this article:

DMIFF-4.47%

KELOWNA, BC / ACCESSWIRE / September 7, 2022 / Diamcor Mining Inc. (TSX-V.DMI)(OTCQB:DMIFF)(FRA:DC3A), (“Diamcor” or, the “Company”) announces today the results of its second tender and sale of rough diamonds recovered from the processing of quarry material from the Company’s Krone-Endora at Venetia Project (the “Project”) held during the current quarter. In the second tender and sale of its second fiscal quarter, the Company sold a total of 1,836.52 carats of rough diamonds including the previously announced 59.35 carat gem diamond, generating gross revenues of USD $1,621,559.42, resulting in an average price of USD $882.95 per carat.

Highlights

The larger gem quality 59.35 carat special rough diamond clearly enhanced the overall average dollar per carat achieved in the second tender and sale of the quarter, and is further confirmation of the potential for these types of rough diamonds to be recovered from the deposits and positively affect gross revenues.
The results of the tender and sale exclusive of the 59.35 carat special rough diamond was 1,777.17 carats, generating gross revenues of USD $425,423.42, resulting in an average price of USD $239.38 per carat.
Although the total number of carats sold to date this quarter is greater than the previous quarter, the total number of carats offered for tender and sale was lower than anticipated, largely a result of the significant Eskom power outages experienced in South Africa during July and August, and the resulting loss of operational hours during those months. Additionally, while the average dollar per carat net of the 59.35 carat rough diamond remained consistent with recent sales, the percentage of +2.0 carat rough diamonds appeared to be lower than normal. This deficiency is believed to be the result of errors in the Project’s final recovery systems, which may have been caused by repeated power supply issues. With both the Eskom outages and power variations now ended for the most part, the Company has undertaken a full review of these systems to ensure any potential for further issues in this area have been minimized moving forward.
In total, 3,776.33 carats have now been sold in the current quarter to date, generating gross revenues of USD $2,099,951.32 resulting in an average price of USD $556.08 per carat inclusive of the 59.35 carat special rough diamond. These gross revenues in the current quarter represent a 276% increase from the gross revenues generated in the previous quarter ending June 30, 2022.

“We are very pleased with the strong results achieved at our latest tender and sale, despite dealing with the significant challenges of operational interruptions and the resulting lower processing volumes caused by the rolling blackouts implemented by South Africa’s national power supplier, Eskom.”, stated Mr. Dean Taylor, Diamcor CEO. “The revenues achieved confirm the potential and value of recovering large gem quality rough diamonds in the specials category, and with the country’s power supply now appearing to have stabilized, we look forward to increased processing volumes through to the end of this year and the potential of recovering additional large rough diamonds in the specials category.”

Update on the Annual Filings and Revocation of the MCTO

The Company is also pleased to announce that the delay in filing its audited financial statements and corresponding management’s discussion and analysis for the year ended March 31, 2022, resulting from the ongoing delays in South Africa related to Stage 6 load-shedding (also known as rolling blackouts) in July by the state-owned electricity utility, Eskom, has been rectified. The Company is now current in its required filings, and the Management Cease Trade Order detailed in its news releases on July 29, 2022, and August 12, 2022, has been revoked by the British Columbia Securities Commission.

About Diamcor Mining Inc.

Diamcor Mining Inc. is a fully reporting publicly traded junior diamond mining company which is listed on the TSX Venture Exchange under the symbol V.DMI, and on the OTC QB International under the symbol DMIFF. The Company has a well-established operational and production history in South Africa and extensive prior experience supplying rough diamonds to the world market.

About the Tiffany & Co. Alliance

The Company has established a long-term strategic alliance and first right of refusal with Tiffany & Co. Canada, a subsidiary of world famous New York based Tiffany & Co., to purchase up to 100% of the future production of rough diamonds from the Krone-Endora at Venetia Project at then current prices to be determined by the parties on an ongoing basis. In conjunction with this first right of refusal, Tiffany & Co. Canada also provided the Company with financing to advance the Project. Tiffany & Co. is now owned by Moet Hennessy Louis Vuitton SE (LVMH), a publicly traded company which is listed on the Paris Stock Exchange (Euronext) under the symbol LVMH and on the OTC under the symbol LVMHF. For additional information on Tiffany & Co., please visit their website at www.tiffany.com.

About Krone-Endora at Venetia

In February 2011, Diamcor acquired the Krone-Endora at Venetia Project from De Beers Consolidated Mines Limited, consisting of the prospecting rights over the farms Krone 104 and Endora 66, which represent a combined surface area of approximately 5,888 hectares directly adjacent to De Beers’ flagship Venetia Diamond Mine in South Africa. On September 11, 2014, the Company announced that the South African Department of Mineral Resources had granted a Mining Right for the Krone-Endora at Venetia Project encompassing 657.71 hectares of the Project’s total area of 5,888 hectares. The Company has also submitted an application for a mining right over the remaining areas of the Project. The deposits which occur on the properties of Krone and Endora have been identified as a higher-grade “Alluvial” basal deposit which is covered by a lower-grade upper “Eluvial” deposit. The deposits are proposed to be the result of the direct-shift (in respect to the “Eluvial” deposit) and erosion (in respect to the “Alluvial” deposit) of material from the higher grounds of the adjacent Venetia Kimberlite areas. The deposits on Krone-Endora occur in two layers with a maximum total depth of approximately 15.0 metres from surface to bedrock, allowing for a very low-cost mining operation to be employed with the potential for near-term diamond production from a known high-quality source. Krone-Endora also benefits from the significant development of infrastructure and services already in place due to its location directly adjacent to the Venetia Mine.

Qualified Person Statement:

Mr. James P. Hawkins (B.Sc., P.Geo.), is Manager of Exploration & Special Projects for Diamcor Mining Inc., and the Qualified Person in accordance with National Instrument 43-101 responsible for overseeing the execution of Diamcor’s exploration programmes and a Member of the Association of Professional Engineers and Geoscientists of Alberta (“APEGA”). Mr. Hawkins has reviewed this press release and approved of its contents.

On behalf of the Board of Directors

Mr. Dean H. Taylor
President & CEO
Diamcor Mining Inc.
www.diamcormining.com

For further information contact:

Mr. Dean H. Taylor
Diamcor Mining Inc
DeanT@Diamcor.com
+1 250 862-3212

Mr. Rich Matthews
Integrous Communications
rmatthews@integcom.us
+1 (604) 355-7179

This press release contains certain forward-looking statements. While these forward-looking statements represent our best current judgement, they are subject to a variety of risks and uncertainties that are beyond the Company’s ability to control or predict and which could cause actual events or results to differ materially from those anticipated in such forward-looking statements. Further, the Company expressly disclaims any obligation to update any forward looking statements. Accordingly, readers should not place undue reliance on forward-looking statements.

WE SEEK SAFE HARBOUR

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SORUCE: Diamcor Mining Inc.

View source version on accesswire.com:
https://www.accesswire.com/714936/Diamcor-Announces-Strong-Tender-and-Sales-Results-Including-5935-Carat-Special-Gem-Diamond

Tags #DeanTaylor, #InvestingInCopper, #JuniorMining, #MauriceJackson, #MilesFranklin, #ProvenAndProbable, DMI

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

Tag: #JuniorMining

Riverside Hits Gold in 8 of 12 Holes at the Oakes Gold Project in the Geraldton Gold Belt, Ontario, Canada

Dolly Varden Silver Intersects 1.60 meters of 4,326 g/t Ag, 4.2% Pb, 1.4% Zn and 1.0 g/t Au within 19.85 meters Averaging 584 g/t Ag at Wolf Vein Extension

Collective Mining Expands the Main Breccia Discovery at Apollo and Drills 265.75 Metres at 2.44 g/t Gold Equivalent

Goldshore Announces Strong Initial Drilling Results from the East Coldstream Deposit 13 Kilometers Northeast of Moss Lake

EMX Receives initial production royalty payments from Gediktepe

Lion One Announces New High-Grade, Near-Surface Gold in Drill Results from Phase 2 Infill Program at Tuvatu, Fiji

Labrador Gold Announces 2.02 G/T Au Over 32 Metres at Big Vein the Longest Mineralized Intersection at Kingsway to Date

Goldshore Intersects 29.05m @ 2.99 g/t Au in 100m Down-dip Step-out

Bravo Continues to Intersect High-Grade PGM’s and Ni Sulphide at Luanga

Diamcor Announces Strong Tender and Sales Results Including 59.35 Carat Special Gem Diamond