Category: Energy

Categories
Base Metals Energy Junior Mining Precious Metals

Eloro Resources Channel Sampling Returns 103M Strike Length Grading 521 Ag Eq/t (Including 117 g Ag/t, 1.44 Au Eq/t, 0.54% Cu and .66% Sn) at Iska Iska Silver-Tin Polymetallic Project, Potosi Department, Bolivia

Table 1

Significant Diamond Drilling Results, Iska Iska, as at November 17, 2021
Significant Diamond Drilling Results, Iska Iska, as at November 17, 2021
Significant Diamond Drilling Results, Iska Iska, as at November 17, 2021

Table 2

Channel Sampling Results, Porco Adit. Note that the samples are continuous channel samples across the vein structures as shown in Figure 2 below. The “From” and “To” distances are the area of influence for each sample used in the weighted average grade calculation.
Channel Sampling Results, Porco Adit. Note that the samples are continuous channel samples across the vein structures as shown in Figure 2 below. The “From” and “To” distances are the area of influence for each sample used in the weighted average grade calculation.
Channel Sampling Results, Porco Adit. Note that the samples are continuous channel samples across the vein structures as shown in Figure 2 below. The “From” and “To” distances are the area of influence for each sample used in the weighted average grade calculation.

Figure 1

Geology of the Iska Iska Caldera Complex showing locations of Major Breccia Pipe targets, the Santa Barbara Resource Definition Target Zone and diamond drill holes completed, in progress and planned. Drill holes for which assays are reported in this release and the location of the Porco adit are highlighted. Locations of Sections in Figure 3 (A-A’) and Figure 5 (B-B’) are also shown.
Geology of the Iska Iska Caldera Complex showing locations of Major Breccia Pipe targets, the Santa Barbara Resource Definition Target Zone and diamond drill holes completed, in progress and planned. Drill holes for which assays are reported in this release and the location of the Porco adit are highlighted. Locations of Sections in Figure 3 (A-A’) and Figure 5 (B-B’) are also shown.
Geology of the Iska Iska Caldera Complex showing locations of Major Breccia Pipe targets, the Santa Barbara Resource Definition Target Zone and diamond drill holes completed, in progress and planned. Drill holes for which assays are reported in this release and the location of the Porco adit are highlighted. Locations of Sections in Figure 3 (A-A’) and Figure 5 (B-B’) are also shown.

Figure 2

Plan Map of Channel Sampling, Porco Adit.
Plan Map of Channel Sampling, Porco Adit.
Plan Map of Channel Sampling, Porco Adit.

Figure 3

Longitudinal Section Showing the Inverse Model of Magnetic Susceptibility. Susceptibility Highlights Major Targets and Geological Features. The location of this Section A-A’ is shown in Figure 1.
Longitudinal Section Showing the Inverse Model of Magnetic Susceptibility. Susceptibility Highlights Major Targets and Geological Features. The location of this Section A-A’ is shown in Figure 1.
Longitudinal Section Showing the Inverse Model of Magnetic Susceptibility. Susceptibility Highlights Major Targets and Geological Features. The location of this Section A-A’ is shown in Figure 1.

Figure 4

3D Magnetic Inversion Model Showing Location of Drill Hole DPC-01. Note how Hole DPC-01 just clips the 3D inversion model shown where the drill hole trace is red.
3D Magnetic Inversion Model Showing Location of Drill Hole DPC-01. Note how Hole DPC-01 just clips the 3D inversion model shown where the drill hole trace is red.
3D Magnetic Inversion Model Showing Location of Drill Hole DPC-01. Note how Hole DPC-01 just clips the 3D inversion model shown where the drill hole trace is red.

Figure 5

Cross Section Looking North of Magnetic Inversion Model Showing Location of Drill Hole DPC-01. The Magnetic High to the Northwest of the Hole is a Priority Target for Drill Testing. The location of this section B-B’ is shown in Figure 1.
Cross Section Looking North of Magnetic Inversion Model Showing Location of Drill Hole DPC-01. The Magnetic High to the Northwest of the Hole is a Priority Target for Drill Testing. The location of this section B-B’ is shown in Figure 1.
Cross Section Looking North of Magnetic Inversion Model Showing Location of Drill Hole DPC-01. The Magnetic High to the Northwest of the Hole is a Priority Target for Drill Testing. The location of this section B-B’ is shown in Figure 1.
  • Drill hole DPC-01 on the edge of a major magnetic susceptibility anomaly in the Porco Breccia Pipe area returned sixteen (16) separate zones of sulphide veins including 110.30 g Ag eq/t over 3.0m.
  • Magnetic inversion model outlines extensive target zone in the Porco-Central Breccia Pipe areas.

TORONTO, Nov. 17, 2021 (GLOBE NEWSWIRE) — Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF; FSE: P2QM) (“Eloro”, or the “Company”) is pleased to provide an update on its Iska Iska silver-tin polymetallic project in the Potosi Department, southern Bolivia. To date, the Company has completed 35,738 metres (m) in 68 drill holes including three (3) in progress to test major target areas at Iska Iska. This press release reports drilling results from one (1) additional hole which tested the Porco Breccia Pipe (“PBP”) (Hole DPC-01) and new underground channel sampling from the Porco adit located approximately 200m south of the PBP. Currently three drill rigs are in operation at Iska Iska. Two surface drill rigs are continuing to drill at the Santa Barbara Resource Definition Target Zone (Figure 1) to outline an initial National Instrument 43-101 (“NI-43-101”) compliant resource. A third drill, an underground rig, situated in the west end of the Santa Barbara Adit, is testing the eastern part of Santa Barbara Breccia Pipe (“SBBP’) and its mineralized envelope. Figure 1 is a geological plan map showing locations of drill holes completed, in progress and planned to complete resource definition drilling along with an updated geological interpretation. Figure 2 is a plan map of channel sampling at the Porco adit. Table 1 provides significant drilling results with definitions of chemical symbols, Table 2 details channel sample results from the Porco adit and Table 3 lists holes completed with assays pending, as well as holes in progress in the three major target areas. Highlights include:

Porco Adit

  • Channel sampling in the Porco adit returned 521.33 g Ag eq/t (including 117.10 g Ag/t, 1.44 g Au/t, 0.54% Cu and 0.66% Sn) over a 103m strike length with an average channel width of 1.8m as shown in Figure 2 and Table 2. Mineralization in the Porco adit is hosted in a series of veins, veinlets, stockworks and disseminations in Ordovician quartz sandstone. The veins are parallel to and crosscutting the drift. In the western part of the drift veins are primarily sulphide-bearing whereas those in the eastern half are primarily oxide. Eloro believes mineralization at the Porco adit is sourced from a large underlying porphyry system as evidenced by recently acquired magnetic susceptibility data.

Porco Breccia Pipe

  • Hole DCP-01 drilled due west at -65 degrees from the Porco radial platform intersected sixteen (16) separate zones of quartz-tourmaline veins in granodioritic intrusive breccia with best results of 110.30 g Ag eq/t over 3.0m, 67.08 g Ag eq/t over 6.0m including 168.25 g Ag eq/t (25.0 g Ag/t, 1.31% Zn, 0.32% Pb and 0.25% Sn) over 1.54m, 131.16 g Ag eq/t (18 g Ag/t, 0.54% Cu and 0.31% Bi) and 80.66 g Ag eq/t over 3.0m (0.23% Sn).

Figure 3 is a longitudinal section (A-A’ in Figure 1) showing the inverse model of magnetic susceptibility which highlights major targets and geological features. Figure 4 is a 3D view of the inversion model showing that Hole DPC-01 just clipped the edge of a very strong and extensive magnetic susceptibility anomaly below and to the northwest of the PBP. The strongest part of the anomaly, as shown in Figure 5, a cross section along drill hole DPC-01 (B-B’ in Figure 1), is located just to the northwest of this hole in the very prospective gap area between the Central Breccia Pipe and the PBP (see Figure 1). Further drilling is planned to test this target once definition drilling at the Santa Barbara Resource Definition Target Zone is completed.

Definition Drilling Santa Barbara Target Area

Definition drilling is continuing in the Santa Barbara Resource Definition Target Zone as shown in Figure 1. Currently a series of SW-NE sections at approximately 100m intervals are being completed with holes drilled on each section at -40 degrees and –65 degrees to provide coverage over the full target strike length of 1,400m. Underground drilling is continuing in the Santa Barbara adit to evaluate the resource potential in the mineralized envelope east of the SBBP. It is anticipated that the definition drilling program will be completed by early December. Drilling will then refocus on exploration of the major magnetic targets in the Central-Porco target area as outlined above.

Dr. Bill Pearson, P.Geo., Eloro’s Executive Vice President Exploration, added: “The magnetic data have proven invaluable in outlining the overall extent of the massive porphyry-epithermal system at Iska Iska. The higher-grade mineralized zones at Iska Iska tend to be magnetic hence the areas with high magnetic response are very prospective targets. Our geophysical team is also currently processing the downhole IP data from the Santa Barbara Resource Definition Target Zone which should help to better define the overall extent of mineralization especially zones with higher sulphide content which are generally higher grade.”

Dr. Osvaldo Arce, P.Geo., General Manager of Eloro`s Bolivian subsidiary, Minera Tupiza S.R.L. (“Minera Tupiza”), said: “The mineralization in the Porco adit is interpreted to be the lower part of the high sulphidation epithermal system which is likely connected to a major tin porphyry at depth as suggested by the extensive magnetic susceptibility anomaly. The intersections in Hole DPC-01 which are most abundant where this hole clipped the magnetic susceptibility anomaly are tin-rich supporting this conclusion. Our work continues to expand the remarkable mineralized system at Iska Iska which has now been shown to be at a district-scale.”

Dr. Quinton Hennigh, P.Geo., Eloro’s Senior Technical Advisor, commented: “The return of impressive polymetallic grades from the Porco adit confirm that the Iska Iska mineral system extends a remarkable 2.5 km from north to south. Metal endowments display notable zonation along this corridor from Ag-Zn-Pb-rich in the north to Ag-Sn-rich in the middle to Ag-Sn-Cu-Au-rich in the south. This is likely a reflection of proximity to the underlying source porphyry believed to be situated along the southern margin of the caldera complex as evidenced by recently collected magnetic data. The southern part of the Iska Iska system shows great potential for further discovery. It will be exciting to see drilling resume in this area.”

Table 1: Significant Diamond Drilling Results, Iska Iska, as at November 17, 2021: https://www.globenewswire.com/NewsRoom/AttachmentNg/09ba03c4-1872-4fcc-b36f-183db890eeb9

Note: True width of the mineralization is not known at the present time, but based on the current understanding of the relationship between drill orientation/inclination and the mineralization within the breccia pipes and the host rocks such as sandstones and dacites. It is estimated that true width ranges between 70% and 90% of the down hole interval length but this will be confirmed by further drilling. Percentage metal contents are shown for each element.

Chemical symbols: Ag= silver, Au = gold, Zn = zinc, Pb = lead, Cu = copper, Sn = tin, Bi = bismuth, Cd = cadmium and g Ag eq/t = grams silver equivalent per tonne. Quantities are given in percent (%) for Zn, Pb Cu, Sn, Bi and Cd and in grams per tonne (g/t) for Ag, Au and Ag eq.

Metal prices and conversion factors used for calculation of g Ag eq/t (grams Ag per grams x metal ratio) are as follows:

ElementPrice (per kg)Ratio to Ag
Ag$875.001.00000
Sn$28.000.03200
Zn$2.800.00320
Pb$2.100.00240
Au$57,40065.6000
Cu$8.800.01006
Bi$12.760.01458
In$305.000.34857
Cd$5.500.00629


In calculating the intersections reported in this press release a sample cutoff of 30 g Ag eq/t was used with generally a maximum dilution of 3 continuous samples below cutoff included within a mineralized section unless more dilution is justified geologically.

The equivalent grade calculations are based on the stated metal prices and are provided for comparative purposes only, due to the polymetallic nature of the deposit. Preliminary metallurgical tests are in progress to establish levels of recovery for each element reported but currently the potential recovery for each element has not yet been established. While there is no assurance that all or any of the reported concentrations of metals will be recoverable, Bolivia has a long history of successfully mining and processing similar polymetallic deposits which is well documented in the landmark volume “Yacimientos Metaliferos de Bolivia” by Dr. Osvaldo R. Arce Burgoa, P.Geo.

Table 2: Channel Sampling Results, Porco Adit. Note that the samples are continuous channel samples across the vein structures as shown in Figure 2 below. The “From” and “To” distances are the area of influence for each sample used in the weighted average grade calculation: https://www.globenewswire.com/NewsRoom/AttachmentNg/ffa132a4-09de-4092-979e-00adafdc0f7c

Table 3: Summary of Diamond Drill Holes Completed with Assays Pending and Drill Holes in Progress at Iska Iska from November 17, 2021 press release.

Hole No.TypeCollar EastingCollar NorthingElevAzimuthAngleHole Length m
Surface Drilling Northwest Extension Santa Barbara
DSB-12S205072.77656867.54165.0225-40806.2
DSB-13S205072.77656867.54165.0225-60696.5
DSB-14S205283.07656587.24175.0225-65968.5
DSB-15S204973.17657053.84165.0225-40731.2
DSB-16S204973.17657053.84165.0225-65862.0
DSB-17S7656765.4205131.34173.0225-40841.0
DSB-18S7656676.3205207.14175.0225-40890.4
DSB-19S7656676.3205207.14175.0225-65803.3
DSB-20S7656765.4205131.34173.0225-65896.5
Subtotal7,495.6
DSB-21S7657138.0204870.04135.0225°-40In progress
DSB-22S7657208.4204799.44145.0225°-40In progress
Underground Drilling Santa Barbara Adit
DSBU-1UG205285.27656074.84165.090-10260.5
DSBU-2UG205285.27656074.84165.0270-20563.6
DSBU-3UG205285.27656074.84165.0270-20443.5
DSBU-4UG205285.27656074.84165.0180-20570.0
Subtotal1,837.6
DSBU-5UG7656074.8205285.24165.00°-40In Progress
Central Breccia Pipe – Surface Radial Drill Program – North Setup
DCN-06S204902.07655860.04420.0180-80626.4
DCN-07S204902.07655860.04420.0270-60680.4
Subtotal1,306.8
Central Breccia Pipe – Surface Radial Drill Program – South Setup
DCS-04S204852.17655612.34429.7180-60644.4
Subtotal644.4
Porco Central – Surface Radial Drill Program
DPC-02S205457.27655110.94175.0225-60908.2
DPC-03S205457.27655110.94175.0135-60524.5
DPC-04S205457.27655110.94175.00-60371.4
DPC-05S205457.27655110.94175.090-60407.5
DPC-06S205457.27655110.94175.0243-60716.4
Subtotal2,928.0
TOTAL14,212.4


S = Surface UG=Underground; collar coordinates in metres; azimuth and dip in degrees. Total drilling completed since the start of the program on September 13, 2020, is 35,738 m in 68 holes including 3 holes in progress (23 underground holes and 45 surface holes).

Figure 1: Geology of the Iska Iska Caldera Complex showing locations of Major Breccia Pipe targets, the Santa Barbara Resource Definition Target Zone and diamond drill holes completed, in progress and planned. Drill holes for which assays are reported in this release and the location of the Porco adit are highlighted. Locations of Sections in Figure 3 (A-A’) and Figure 5 (B-B’) are also shown: https://www.globenewswire.com/NewsRoom/AttachmentNg/153d2784-8eef-45ad-abca-d05860e6cb2a

Figure 2. Plan Map of Channel Sampling, Porco Adit: https://www.globenewswire.com/NewsRoom/AttachmentNg/1f3d819b-bad5-45f4-a0bf-171621ea6632

Figure 3. Longitudinal Section Showing the Inverse Model of Magnetic Susceptibility. Susceptibility Highlights Major Targets and Geological Features. The location of this Section A-A’ is shown in Figure 1: https://www.globenewswire.com/NewsRoom/AttachmentNg/4eb5b907-2b81-4785-8f51-6dd3f8c676ac

Figure 4: 3D Magnetic Inversion Model Showing Location of Drill Hole DPC-01. Note how Hole DPC-01 just clips the 3D inversion model shown where the drill hole trace is red: https://www.globenewswire.com/NewsRoom/AttachmentNg/e7ed3ee0-17d6-479d-b080-6cecb3edca1a

Figure 5. Cross Section Looking North of Magnetic Inversion Model Showing Location of Drill Hole DPC-01. The Magnetic High to the Northwest of the Hole is a Priority Target for Drill Testing. The location of this section B-B’ is shown in Figure 1: https://www.globenewswire.com/NewsRoom/AttachmentNg/2aca4daf-333a-44b4-b158-d285dd976b82

Qualified Person

Dr. Osvaldo Arce, P. Geo., General Manager of Minera Tupiza, and a Qualified Person in the context of NI 43-101, has reviewed and approved the technical content of this news release. Dr. Bill Pearson, P.Geo., Executive Vice President Exploration Eloro, and who has more than 45 years of worldwide mining exploration experience including extensive work in South America, manages the overall technical program working closely with Dr. Arce. Dr. Quinton Hennigh, P.Geo., Senior Technical Advisor to Eloro and Independent Technical Advisor, Mr. Charley Murahwi P. Geo., FAusIMM of Micon International Limited are regularly consulted on technical aspects of the project.

Drill samples are prepared in ALS Bolivia Ltda’s preparation facility in Oruro, Bolivia with pulps sent to the main ALS Global laboratory in Lima for analysis. As announced in the February 26, 2021 press release, Eloro has changed the assay protocol to utilize X-ray fluorescence (XRF) to more accurately analyze higher tin. Tin in the CBP is suspected to occur as cassiterite which is insoluble in acid digestion, and therefore not suited for wet chemical techniques. In addition, other assay protocols have been changed to provide for a more accurate measurement of the wide-ranging suite of polymetallic metals at Iska Iska. Eloro employs an industry standard QA/QC program with standards, blanks and duplicates inserted into each batch of samples analyzed with selected check samples sent to a separate accredited laboratory.

Recently, AHK Laboratories, who manage a global network of laboratories have setup operations in Bolivia with the establishment of a preparation laboratory in Oruro. AHK has a strong base of accredited laboratories in South America including Peru, Chile, Brazil and Argentina. Eloro has contracted AHK to provide additional analytical services in order to help reduce the sample backlog. A series of check samples are currently being analyzed by AHK as a QA/QC check. AHK is following the same analytical protocols used as with ALS and with the same QA/QC protocols. The use of both accredited laboratories is reducing the backlog of samples to be analysed and improving turnaround.

The magnetic survey was carried out by MES Geophysics using a GEM Systems GSM-19W Overhauser magnetometer. Dr. Chris Hale, P.Geo. and Mr. John Gilliatt, P.Geo. of Intelligent Exploration provided the survey design, preparation of the maps and interpretation from data processed and quality reviewed by Rob McKeown, P. Geo. of MES Geophysics. Messrs. Hale, Gilliatt and McKeown are Qualified Persons as defined under NI 43-101. The 3D magnetic inversion model was prepared by Mr. Joe Mihelcic, P.Eng., P.Geo. of Clearview Geophysics in consultation with Messrs. Hale and Gilliatt. Mr. Mihelcic is a QP under NI 43-101.

About Iska Iska

Iska Iska silver-tin polymetallic project is a road accessible, royalty-free property, wholly controlled by the Title Holder, Empresa Minera Villegas S.R.L. and is located 48 km north of Tupiza city, in the Sud Chichas Province of the Department of Potosi in southern Bolivia. Eloro has an option to earn a 99% interest in Iska Iska.

Iska Iska is a major silver-tin polymetallic porphyry-epithermal complex associated with a Miocene possibly collapsed/resurgent caldera, emplaced on Ordovician age rocks with major breccia pipes, dacitic domes and hydrothermal breccias. The caldera is 1.6km by 1.8km in dimension with a vertical extent of at least 1km. Mineralization age is similar to Cerro Rico de Potosí and other major deposits such as San Vicente, Chorolque, Tasna and Tatasi located in the same geological trend.

Eloro began underground diamond drilling from the Huayra Kasa underground workings at Iska Iska on September 13, 2020. On November 18, 2020, Eloro announced the discovery of a significant breccia pipe with extensive silver polymetallic mineralization just east of the Huayra Kasa underground workings and a high-grade gold-bismuth zone in the underground workings. On November 24, 2020, Eloro announced the discovery of the SBBP approximately 150m southwest of the Huayra Kasa underground workings.

Subsequently, on January 26, 2021, Eloro announced significant results from the first drilling at the SBBP including the discovery hole DHK-15 which returned 129.60 g Ag eq/t over 257.5m (29.53g Ag/t, 0.078g Au/t, 1.45%Zn, 0.59%Pb, 0.080%Cu, 0.056%Sn, 0.0022%In and 0.0064% Bi from 0.0m to 257.5m. Subsequent drilling has confirmed significant values of Ag-Sn polymetallic mineralization in the SBBP and the adjacent CBP. A substantive mineralized envelope which is open along strike and down-dip extends around both major breccia pipes. Continuous channel sampling of the Santa Barbara Adit located to the east of SBBP returned 442 g Ag eq/t (164.96 g Ag/t, 0.46%Sn, 3.46% Pb and 0.14% Cu) over 166m including 1,092 g Ag eq/t (446 g Ag/t, 9.03% Pb and 1.16% Sn) over 56.19m. The west end of the adit intersects the end of the SBBP.

Since the discovery hole on the SBBP, Eloro has released a number of significant drill results on this target, including:

  • 122.66 grams g Ag eq/t (35.05 g Ag/t, 0.72% Zn, 0.61% Pb, 0.11% Sn and 0.06 g Au/t) over 123.61m including 205.74 g Ag eq/t (92.30 g Ag/t, 0.57% Zn, 0.85% Pb, 0.18% Sn and 0.07 g Au/t) over 32.32m (DSB-07),
  • 105.41 g Ag eq/t (8.55 g Ag/t, 1.01% Zn, 0.48% Pb, 0.06% Sn and 0.38 g Au/t) over 173.58m including 199.77 g Ag eq/t (21.90 g Ag/t, 1.18% Zn, 0.93% Pb 0.12% Sn and 0.94 g Au/t) over 39.08m (DSB-07)
  • 69.89 g Ag eq/t over 252.89m from 355.12 to 608.02m including several higher-grade sections of 196.60 g Ag eq/t including 131.13 g Ag/t over 14.52m, 134.62 g Ag eq/t including 93.25 g Ag/t over 21.08m and 145.35 g Ag eq/t including 2.38% Zn over 10.11m (DSB-08).
  • 114.96 Ag eq/t including 0.325% Sn over 56.2m including a higher-grade section of 187.98 g Ag eq/t including 0.535% Sn over 28.86m; 80.71 g Ag eq/t including 0.213% Sn over 74.39m and 118.69 g Ag eq/t over 10.77m (DSB-10).
  • 129.65 g Ag eq/t (18.38 g Ag/t, 2.14% Zn, 0.67%Pb, and 0.047% Sn) over 300.75m from 65.14m to 365.91m, including higher grade intervals of 215.54 g Ag eq/t over 72.76m, 163.35 g Ag eq/t over 31.83m and 224.48 g Ag eq/t over 19.39m. 82% of this 446.5m long hole contained reportable intervals (DHK-18).
  • 234.19 g Ag eq/t (70.58 g Ag/t, 2.31% Zn, 2.74% Pb and 0.042% Sn) over 53.2m including a higher-grade portion of 931.73 g Ag eq/t (367.29 g Ag/t, 5.64% Zn, 13.67% Pb and 0.10% Sn) over 9.26m (DHK-20).
  • 108.24 g Ag eq/t (3.14g Ag/t, 0.24 g Au/t, 2.03% Zn and 0.58% Pb) over 48.2m including a higher-grade interval grading 180.76 g Ag eq/t (4.46 g Ag/t, 0.35 g Au/t, 3.57% Zn and 1.05% Pb) over 15.02m (DHK-19). 160.22 g Ag eq/t (36.53 g Ag/t, 1.63% Zn, 1.20% Pb and 0.10% Sn) over 194.14m (DHK-21) including higher grade portions of:
    • 250.50 g Ag eq/t (51.31 g Ag/t, 3.35% Zn, 1.78% Pb and 0.10% Sn) over 18.24m.
    • 257.40 g Ag eq/t (75.83 g Ag/t, 2.29% Zn, 2.40% Pb and 0.12% Sn) over 16.33m.
    • 350.91 g Ag eq/t (112.57 g Ag/t, 1.41% Zn, 3.08% Pb and 0.33% Sn) over 30.06m.
    • 64% of this 512.9m long hole contains reportable intersections
  • 94.68 g Ag eq/t (3.87 g Ag/t, 0.067 g Au/t, 1.63% Zn, 0.43% Pb and 0.05% Sn) over 169.93m including a higher-grade zone that graded 158.64 g Ag eq/t (9.35g Ag/t, 0.016 g Au/t, 3.43% Zn, 0.71% Pb and 0.03%Sn) over 29.84m (DHK-22).
  • 100g Ag eq/t (including 38.71 g Ag/t, 0.88%Zn and 0.51%Pb) over 188.5 m from 58.67m to 247.13m including a higher-grade portion of 154 g Ag eq/t (including 75.51 g Ag/t, 0.96% Zn, 0.65% Pb and 0.16%Cu) over 65.8m (DHK-23)

On May 4, 2021, Eloro released results from the first drill hole on the CBP. Hole DCN-01 intersected multiple mineralized intercepts including 196.09 g Ag eq/t (150.25 g Ag/t, 0.10% Sn and 0.05 g Au/t) over 56.2m and containing 342.98 g Ag eq/t (274.0 g Ag/t, 0.16% Sn and 0.16 g Au/t) over 27.53m.

Hole DCN-04 drilled at -80 degrees to the north from the northern radial platform of the CBP, intersected seventeen (17) mineralized intersections, principally Sn-Ag-bearing, over its 851.4m length. Best results include: 71.54 g Ag eq/t (32.58 g Ag/t and 0.10% Sn) over 97.10m from 134.40 to 231.5m; 101.52 g Ag eq/t (28.74 g Ag/t and 0.19% Sn) over 62.01m; 70.42 g Ag eq/t (28.74 g Ag/t and 0.16% Sn) over 22.59m; and 236.96 g Ag eq/t (92.21 g Ag/t and 0.25% Sn) over 17.45m. Hole DCS-02 was drilled southeast at -60 degrees from the south radial platform of the CBP. This hole, which was drilled to 800.5m, intersected nine (9) reportable Ag-Zn-Pb-Sn mineralized intervals. Best results include 79.53 g Ag eq/t (including 0.21% Sn) over 19.42m, 101.01 g Ag eq/t (32.76 g Ag/t, 0.76% Zn, 0.75% Pb) over 10.47 and 130.95g Ag eq/t (34.14 g Ag/t, 0.10 g Au/t, 1.35% Zn and 0.56 % Pb over 7.40m.

A detailed ground magnetic survey of the Iska Iska property, reported on June 6, 2021, confirmed the extent of the Iska Iska Caldera as determined from geological mapping and satellite interpretation, including Aster data. The SBBP and CBP, both of which have been confirmed by drill-testing, are marked by prominent low anomalies reflecting strong alteration. The magnetic data suggests that the Central and Porco Breccia Pipes likely merge at depth. In addition, there is a prominent area of low intensity magnetics northwest of the SBBP which was reported on in this press release.

Geological mapping and satellite interpretation identified a third major breccia pipe target, Porco (South), that is approximately 600m in diameter (South) located southeast of the CBP in the southern part of the Iska Iska caldera complex. The Porco (South) Breccia Pipe target has a similar magnetic signature to the Santa Barbara and Central Breccia Pipes, further confirming the likelihood of it being a major breccia pipe. Six (6) drill holes have been completed on Porco; assay results are pending. Previous channel sampling in the Porco adit located adjacent the target area 200m to the southeast returned 50m grading 519.35 g Ag eq/t including 236.13 g Ag/t, 1.89 g Au/t, 0.87% Cu, 0.22% Bi and >0.05% Sn over an average sample width of 2.49m.

Currently three diamond drill rigs are active at Iska Iska, two surface rigs and one underground drill. Planned drilling for 2021 is 51,000m with the aim of outlining an initial inferred NI 43-101 compliant mineral resource by Q1 2022. The target zone at the SBBP and the surrounding mineralized envelope is 1400m along strike, 500m wide and extends to a depth of 600m. This zone is open along strike to the northwest and southeast. A downhole induced polarization/resistivity (IP/Res) survey is in progress to further define drill targets and aid resource definition drilling. Preliminary metallurgical tests are also in progress. An updated NI 43-101 Technical Report is being prepared by independent consultant Micon International Ltd.

About Eloro Resources Ltd.

Eloro is an exploration and mine development company with a portfolio of gold and base-metal properties in Bolivia, Peru and Quebec. Eloro has an option to acquire a 99% interest in the highly prospective Iska Iska Property, which can be classified as a polymetallic epithermal-porphyry complex, a significant mineral deposit type in the Potosi Department, in southern Bolivia. Eloro commissioned a NI 43-101 Technical Report on Iska Iska, which was completed by Micon International Limited and is available on Eloro’s website and under its filings on SEDAR. Iska Iska is a road-accessible, royalty-free property. Eloro also owns an 82% interest in the La Victoria Gold/Silver Project, located in the North-Central Mineral Belt of Peru some 50 km south of Barrick’s Lagunas Norte Gold Mine and Pan American Silver’s La Arena Gold Mine. La Victoria consists of eight mining concessions and eight mining claims encompassing approximately 89 square kilometres. La Victoria has good infrastructure with access to road, water and electricity and is located at an altitude that ranges from 3,150 m to 4,400 m above sea level.

For further information please contact either Thomas G. Larsen, Chairman and CEO or Jorge Estepa, Vice-President at (416) 868-9168.

Information in this news release may contain forward-looking information. Statements containing forward looking information express, as at the date of this news release, the Company’s plans, estimates, forecasts, projections, expectations, or beliefs as to future events or results and are believed to be reasonable based on information currently available to the Company. There can be no assurance that forward-looking statements will prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements. Readers should not place undue reliance on forward-looking information.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

Categories
Base Metals Energy Exclusive Interviews Junior Mining Nevada Copper Noram Lithium

Andrew Hecht – Green Energy Are Catalysts For Lithium And Copper

  • Battery metal demand is rising, and the trend will continue
  • New properties are in demand- Producers provide leverage to the metal prices, and exploration companies turbocharge the gearing- Location is critical
  • Lithium Americas (LAC) looks to pick up a property
  • Nevada Copper (NEVDF)- The trend is your friend, and increasing demand for EVs supports a continuation of the rally

Noram Lithium (NRVTF)- An undervalued battery metal play in Nevada, a desirable jurisdiction

In real estate, a property’s value always reflects its location. Any real estate professional understands that the three leading value factors are location-location-location. 

Commodity producers face many regional issues. Raw materials can occur in local regions where political or economic forces make extraction challenging. The cost of production reflects local tax, royalty, logistical, and other factors.

Over the past year, the ascent of metals prices has caused many of the world’s leading producers to scramble to find new mining projects to meet the growing demand. One of the world’s leading diversified commodity producers, BHP is currently in talks with Ivanhoe Mines to acquire part of the Western Foreland exploration area in the Democratic Republic of the Congo (DRC). While DRC is the largest copper producer in Africa with the most substantial reserves, the country has a long history of corruption that has impeded its growth. The DRC is not an ideal location for mining companies, but the growing need for new output has put BHP in a position to consider the project. It takes up to ten years to bring a new copper mine into production, and producers are scouring the earth for projects that will meet the increasing demand.

Goldman Sachs called copper “the new oil” because of its role in decarbonization. Three-month LME copper was trading at the $9,518 per ton level on November 5, with the December COMEX copper futures at the $4.3430 per pound level. Goldman projects that copper prices could rise to the $15,000 per ton level by 2025, putting COMEX copper futures north of the $6.80 per pound level.  

Meanwhile, lithium is another commodity that is experiencing growing demand. The success of addressing climate change through decarbonization relies on ample supplies of battery metals that can replace fossil fuels.

While BHP is looking to the DRC for new copper deposits, other mining and exploration companies are developing battery metal deposits. Friendlier and less challenging jurisdictions are likely to attract significant premiums over the coming months and years.

In the US, Nevada, the silver state, has a long history as one of the most favorable mining jurisdictions on the earth. When it comes to location, it does not get much better than Nevada.

Battery metal demand is rising, and the trend will continue

Climate change is not a US issue; it is a worldwide trend. Addressing climate change involves replacing the hydrocarbons that currently power the world with alternative, renewable energy sources. While batteries power only around one percent of the cars on roads today, the demand for EVs is growing by leaps and bounds. Hertz recently announced they are purchasing 100,000 Tesla model-3 EVs in a $4.2 billion deal. EVs will make up 20% of the Hertz fleet by the end of 2022. Hertz will also install thousands of charging stations in its locations in the US and Europe.

EV’s require twice the copper as internal combustion engines. The batteries require other metals and minerals including, lithium, nickel, cobalt, zinc, aluminum, manganese, graphite, and potassium. Tesla’s batteries currently use lithium-nickel-cobalt-aluminum chemistry. However, the company is working on a set of cobalt-free or reduced batteries drawing on lithium-iron-phosphate technology and chemistries that rely more heavily on nickel. The three-month nickel price on the London Metals Exchange closed 2020 at the $16,600 per ton level. As of November 4, the price was over $19,400 after reaching over $20,500 during the year. Copper futures on COMEX may have corrected from the May 2021 all-time high at nearly $4.90 per pound, but they remain appreciably higher than at the end of 2020.

Source: CQG

The monthly chart shows that copper closed 2020 at the $3.52 level. At the $4.3430 per pound level in early November 2021, copper futures were over 23% higher. The price action in the lithium carbonate market has been even more bullish.

Source: Trading Economics

The chart shows the rise from below $33,000 per ton in 2020 to the current price at the $194,500 level, an increase of nearly six times. Lithium’s ascent is more like a cryptocurrency than a commodity as the demand for the metal for EV production grows.

New properties are in demand- Producers provide leverage to the metal prices, and exploration companies turbocharge the gearing- Location is critical

Mining companies make substantial capital investments to extract raw materials from the earth’s crust. The leading mining companies profit handsomely when market prices exceed production costs, creating leverage. Mining companies often outperform the commodities they produce on the upside but underperform when prices decline.

Meanwhile, exploration companies provide even more leverage. Since rewards are always a function of the risks, companies that search for commodities tend to experience incredible gains when they find them and begin production or sell the properties to the more established mining companies that can take projects to the next production and processing levels.

The mining industry reflects economies of scale. The leading companies like BHP, Rio Tinto, Anglo American, Glencore, and others have made significant capital investments and spread production risks over a diversified portfolio of mining properties. They tend to allow exploration companies to make the finds and then take the mining properties to the next steps.

When it comes to investing, exploration companies can offer attractive returns that often outpace the underlying commodity and the established miners on a percentage basis. If the BHP’s offer leverage, exploration companies turbocharge that gearing.  

Lithium Americas (LAC) looks to pick up a property

Lithium Americas Corporation (LAC) operates as a resource company in the United States. The company explores for lithium deposits. LAC owns interests in the Cauchari-Olaroz Project in the Jujuy province of Argentina and the Thacker Pass project in north-western Humboldt County, Nevada. Thacker Pass recently increased its Phase 1 capacity to target 40,000 tpa lithium carbonate.

LAC announced it submitted an unconditional offer to Millennial Lithium Corporation to acquire all of the outstanding shares for approximately $400 million.

Source: Barchart

The chart shows LAC’s ascent from a low of $1.92 per share in March 2020 to its most recent high of $33.42 on November 4. At the $32.67 per share level, LAC’s market cap was over $3.919 billion. An average of over five million shares changes hands each day. Lithium has been a hot commodity that has moved nearly six times since 2020. LAC shares have moved over seventeen times higher over the period as the successful mining company turbocharged the commodity’s percentage gain.

Nevada Copper (NEVDF)- The trend is your friend, and increasing demand for EVs supports a continuation of the rally

Nevada Copper is an exploration company in the silver state of Nevada. The company owns a 100% interest in the Pumpkin Hollow property that contains copper, gold, and silver reserves. The most recent operations update highlighted accelerated stope turnover rates, management team changes that strengthened the company, productivity improvements, and processing of ore averaging approximately 1.5% copper delivered to the mill. Since the May high, copper’s price has dropped at nearly $4.90 per pound on the nearby COMEX futures contract. NEVDF is an exploration company, so its share performance tends to outperform the commodity on the upside and underperform on the downside. Copper rose from $3.52 per pound at the end of 2020 to a high of $4.8985 in May or 39.2%. On November 5, the price was at the $4.3430 level, 11.3% below the May peak. NEVDF shares closed 2020 at the $1.14 level.

Source: Barchart

The chart highlights that NEVDF shares reached a high of $2.71 when copper peaked and traded at 67.00 cents per share on November 5. NEVDF shares rallied by 137.7% and from the end of 2020 to the May 2021 high and were 75.3% lower than the peak as of November 5. Like many exploration companies, NEVDF turbocharged the price action in copper, outperforming the metal on the upside and underperforming on the downside.

As the demand for copper will rise over the coming years, and Goldman Sachs expects the price to increase dramatically, now could be the perfect time to consider this exploration company.

Noram Lithium (NRVTF)- Another battery metal play in Nevada, a desirable jurisdiction

Norman Lithium (NRVTF) is an exploration company that develops mineral properties in the United States.
The company owns interests in the Zeus Lithium Project in Clayton Valley, Nevada. Noram’s property is next door to Albemarle Corporation’s (ALB)  Silver Peak Lithium Mine in Nevada. 

Noram’s latest highlights include:

  • A 70% increase in measured and indicated resources
  • A 369% increase in inferred resources
  • Deposits near the surface, reducing production costs
  • The potential to increase the deposit size via deeper drilling
  • An environmentally friendly footprint
  • A Preliminary Economic Assessment (PEA) in the coming weeks – Advancing the project closer to its’ production target

At the 67.15 cents per share level, NRVTF has a market cap at the $50.701 million level. An average of 56,780 shares changes hands each day.

Source: Barchart

The chart shows NRVTF shares closed at the 40.26 cents level on December 31, 2020. At 66.87 on November 5, they were 66.1% higher. NRVTF shares reached a high of 98.78 cents on January 14, 2021, which is the stock’s current technical target. The shares have traded in a bullish trend since mid-April 2021.

With the spotlight on lithium, Norman could be an excellent exploration company to consider. Success in the Zeus project could attract interest from companies like Lithium Americas Corporation (LAC) that is currently buying Millennial Lithium Corporation’s shares for $400 million, nearly eight times higher than NRVTF’s current market cap.

Exploration companies are risky, but the potential for substantial rewards always involves an elevated risk level. Meanwhile, Nevada Copper and Noram Lithium have location on their sides as Nevada is a highly desirable mining jurisdiction in a world hungry for copper and lithium supplies.

Written By: Andrew Hecht, on behalf of Maurice Jackson of Proven and Probable.

Any investment involves substantial risks, including, but not limited to, pricing volatility, inadequate liquidity, and the potential complete loss of principal. This document does not in any way constitute an offer or solicitation of an offer to buy or sell any investment, security, or commodity discussed herein, or any security in any jurisdiction in which such an offer would be unlawful under the securities laws of such jurisdiction.

Categories
Base Metals Emx Royalty Energy Junior Mining Precious Metals Project Generators Uncategorized

EMX Royalty Announces Third Quarter 2021 Results

Vancouver, British Columbia–(Newsfile Corp. – November 12, 2021) – EMX Royalty Corporation (NYSE American: EMX) (TSXV: EMX) (FSE: 6E9) (the “Company” or “EMX”) is pleased to report results for the quarter ended September 30, 2021 (“Q3-2021”). The Company’s filings for Q3-2021 are available on SEDAR at www.sedar.com, on the U.S. Securities and Exchange Commission’s website at www.sec.gov, and on EMX’s website at www.EMXroyalty.com. Financial results were prepared in accordance with International Financial Reporting Standards, as issued by the International Accounting Standards Board.

HIGHLIGHTS FOR Q3-2021

Significant Acquisitions

  • EMX closed the acquisition of a portfolio of royalty interests and deferred payments from SSR Mining Inc. and certain of its subsidiaries (“SSR Mining“) (see EMX news release dated October 21, 2021). The Portfolio consists of 16 geographically diverse base and precious metals royalties, with four royalty assets at advanced stages of project development, and also includes US $18 million in future cash payments. EMX has paid US $33 million in cash and issued 12,323,048 common shares of the Company valued at US $32.5 million to SSR Mining. SSR Mining now owns an approximate 12% undiluted equity interest in EMX. EMX will also make deferred and contingent payments to SSR Mining of up to US $34 million if certain project advancement milestones are achieved.
  • EMX completed the acquisition of an effective 0.418% NSR royalty on the Caserones Copper-Molybdenum Mine located in northern Chile for US$34.1 million in cash (see EMX news release dated September 3, 2021). Caserones is a significant porphyry copper-molybdenum mining operation in a top tier mining jurisdiction. The Caserones acquisition brings immediate cashflow to EMX’s portfolio. Through the quarter end, EMX has realized an initial payment of US $951,000 from the second quarter (i.e., April – June) royalty distributions.

Financial Update

Dollar amounts are in CDN unless otherwise noted.

  • As at September 30, 2021, EMX ended the quarter with a working capital balance of $13,889,000 including cash and cash equivalents of $46,735,000, investments, strategic investments, and receivables and loan receivables totaling $27,034,000, and debt of $54,134,000.
  • To facilitate the Caserones and SSR royalty acquisitions, as well as to supplement working capital, the Company has entered into three financing transactions including a US$44,000,000 credit facility with Sprott Private Resource Lending II (Collector), LP, a Vendor-take-back note of US$7.85 million with SSR Mining, and the closing of the first tranche of a private placement for gross proceeds of $20,913,000.
  • For the three months ended September 30, 2021, EMX had revenue and other income of $1,504,000. EMX also received or accrued from its effective royalty interest on the Caserones mine its first quarterly payment of approximately US$950,000.
  • Royalty generation costs for the three months ended September 30, 2021 totaled $3,882,000 including share-based compensation of $45,000, of which the Company recovered $1,792,000 from partners.
  • General and administrative expenses totaled $1,807,000. The increase from Q3-2020 is largely the result of increased due diligence costs related to the Caserones acquisition and other prospective royalty assets.
  • For the three months ended September 30, 2021, the Company had a net loss from operations of $10,866,000. In addition to operating items noted above, included in net loss from operations was $759,000 in depletion, depreciation, and direct royalty taxes, and $1,206,000 in share-based compensation. Other items affecting net loss in Q3-2021 include a gain from the Company’s investments in associated entities of $1,138,000 primarily related to its effective royalty interest in the Caserones mine, a fair value loss on investments of $3,731,000, and a foreign exchange gain of $1,301,000. The Company also recorded impairment charges of $4,178,000 including $4,022,000 related to its investment in Rawhide Acquisition Holding LLC (“RAH” or “Rawhide”). The foreign exchange gain was primarily related to the Company holding cash and net assets denominated in US.

Operational Update

EMX’s royalty and mineral property portfolio totals over 280 projects on five continents. The following summarizes the work conducted in Q3-2021, as well as subsequent events, by the Company and its partners.

  • In North America, EMX received provisional payments of approximately US$641,000 from the sale of 364 gold ounces produced at the Leeville royalty property in Nevada’s Northern Carlin Trend. Leeville’s Q3 performance ensures that 2021 will be a year of increased payments due to robust production contributions from Carlin East and Four Corners. On the royalty generation front, EMX continued to evaluate and add new gold and copper projects to the portfolio by staking open ground. Partner companies continued to build value in the portfolio with their summer field exploration programs. In particular, partner Ridgeline Minerals’ successes at Swift resulted in the Carlin-type gold project being optioned to Nevada Gold Mines. Ridgeline also reported additional encouraging drill results from the Selena sediment-hosted silver-gold project.

    EMX’s royalty and mineral asset portfolio in key mining districts of Ontario and Quebec, including the Red Lake camp, generated $75,000 in cash and fair value equity payments. EMX’s initiatives in Canada included staking prospective open ground, as well as expanding land positions at several existing properties.
  • In Serbia, Timok operator Zijin Mining Group Co. Ltd. (“Zijin”) received the final operating licenses and is in the trial production stage at the Upper Zone copper-gold project, which is covered by an EMX 0.5% NSR royalty. The Company filed an amended and restated Technical Report titled “NI 43-101 Technical Report – Timok Copper-Gold Project Royalty, Serbia” on SEDAR dated July 21, 2021 authored by Mineral Resource Management LLC.
  • In Fennoscandia, EMX executed an agreement for the sale of its Svärdsjö polymetallic project in Sweden to District Metals Corp. (TSX-V: DMX) for share equity, AAR payments, and retained royalty interests to EMX’s benefit. Subsequently EMX executed an option agreement for the sale of five battery metals projects in Sweden to Swedish Nickel Pty. Ltd. for share equity, AAR payments, retained royalty interests in the projects, work commitments and other consideration. As these six new deals were completed, partner companies continued to advance EMX’s royalty properties, which included further encouraging results from District’s drill program at the Tomtebo polymetallic project in Sweden’s Bergslagen mining district.
  • In Australia, the Company was granted the Copperhole Creek exploration license in the Georgetown Region of North Queensland. The Copperhole Creek project is available for partnership.

Corporate Update

EMX is monitoring developments regarding the ongoing coronavirus pandemic (“COVID-19”), with a focus on the jurisdictions in which the Company operates. EMX has implemented COVID-19 prevention, monitoring and response plans following the guidelines of international agencies and the governments and regulatory agencies of each country in which it operates. EMX’s priority is to safeguard the health and safety of its personnel and host communities, support government actions to slow the spread of COVID-19, and assess and mitigate the risks to business continuity. Although various levels of restrictions remain in place for some jurisdictions where the Company operates (e.g., travel restrictions, etc.), EMX’s field programs are up-and-running with in-country based staff.

Outlook

With the closing of the SSR and Caserones acquisitions, EMX continues to significantly strengthen its global portfolio of royalties. Gediktepe is one of several EMX royalty properties that are expected to commence production during late Q4, 2021 and early 2022. The others include the Timok development project in Serbia, where the Cukaru Peki high grade copper-gold deposit is being put into production by Zijin Mining Group Co. Ltd., and Balya North, a polymetallic Carbonate Replacement Deposit (“CRD”) in western Turkey being developed by Esan Eczacibaşi Endüstriyel Hammaddeler San. ve Tic. A.Ş., a private Turkish company.

EMX’s Leeville royalty in Nevada has delivered increased cash flows in recent months, with royalty production proceeds now being received from the Four Corners and Carlin East mining areas in addition to other areas on the royalty property. Together with cash flow already being received from its recently purchased Caserones copper-molybdenum royalty in Chile, EMX anticipates a significant increase in royalty revenue in 2022 from multiple assets that span four continents. See the EMX website (www.EMXroyalty.com) for further project and portfolio details.

The SSR royalty portfolio acquisition is an example of EMX’s corporate growth strategy, whereby the Company leveraged its in-region expertise to identify opportunities in jurisdictions where EMX already has a strategic presence, and hence a competitive advantage. This approach leads to value creation for the Company as well as synergies with existing EMX initiatives around the world. The Company is continuing with its assessments of royalty acquisition opportunities to continue growing the portfolio.

Meanwhile the Company’s royalty generation initiatives continued moving forward during Q3, which provided deal flow momentum moving into Q4. EMX partnered six projects in Fennoscandia for retained royalty interests, cash payments, and equity interests while continuing with field programs to add new projects to the royalty generation portfolio. In Australia, despite the challenges of COVID-19 lockdowns, the Company was successful in its efforts to add the Copperhole Creek project to the royalty generation portfolio. In the southwestern U.S., Regional Strategic Alliance (“RSA”) generative funds from South32 paid for identifying new copper properties for potential acquisitions. Elsewhere, multiple new precious-metals projects were staked by the Company in Idaho and Nevada which are now available for partnership. EMX is steadily building its generative portfolio in key mineral belts of the western U.S. and is now the third largest holder of mineral rights in Arizona and the second largest in Idaho. Fennoscandia, Australia, and the U.S. are stable exploration and mining jurisdictions, and EMX’s royalty generation assets provide prime opportunities for new partnerships.

EMX’s established partner companies continue to add value to the portfolio with encouraging drill results and other important advancements. In Fennoscandia, most notable were District’s drill success at Tomtebo (Norway) and further expansion of PGE-Ni-Cu mineralized zones at the Kaukua South project by Palladium One. In the western U.S. advancements included Ridgeline Minerals’ encouraging drill results from the Selena precious metals project on the Carlin Trend, and a joint venture agreement with Nevada Gold Mines for the Cortez Trend’s Swift gold project. EMX’s partners continued creating value on these assets, as well as others, at no cost to the Company. This trend of ongoing partner funded work expenditures is expected to carry forward, if not increase, going into Q4.

The Company will continue to strengthen its balance sheet through increased cashflows from royalties, deferred royalty payments, sale of investments, and other income. As part of this effort to strengthen working capital, in November 2021, the Company completed the first tranche of a $21.45 million private placement by the issuance of 6,337,347 units at $3.30 each for gross proceeds of $20.9 million. Increases to EMX’s treasury will allow it to continue project generation and royalty acquisition activities, thereby further building shareholder value (See Liquidity and Capital discussions below).

QUALIFIED PERSONS

Michael P. Sheehan, CPG, a Qualified Person as defined by NI 43-101 and employee of the Company, has reviewed, verified, and approved the above technical disclosure on North America. Eric P. Jensen, CPG, a Qualified Person as defined by NI 43-101 and employee of the Company, has reviewed, verified, and approved the above technical disclosure on Significant Acquisitions, Serbia, Fennoscandia, and Australia.

ABOUT EMX

EMX is a precious, base, and battery metals royalty company. EMX’s investors are provided with discovery, development, and commodity price optionality, while limiting exposure to risks inherent to operating companies. The Company’s common shares are listed on the NYSE American Exchange and the TSX Venture Exchange under the symbol EMX, as well as on the Frankfurt exchange under the symbol 6E9. See www.EMXroyalty.com for more information.

For further information contact:

David M. Cole
President and Chief Executive Officer
Phone: (303) 979-666
Dave@EMXroyalty.com

Scott Close
Director of Investor Relations
Phone: (303) 973-8585
SClose@EMXroyalty.com

Isabel Belger
Investor Relations (Europe)
Phone: +49 178 4909039
IBelger@EMXroyalty.com

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements

This news release may contain “forward looking statements” that reflect the Company’s current expectations and projections about its future results. These forward-looking statements may include statements regarding perceived merit of properties, exploration results and budgets, mineral reserves and resource estimates, work programs, capital expenditures, timelines, strategic plans, market prices for precious and base metal, or other statements that are not statements of fact. When used in this news release, words such as “estimate,” “intend,” “expect,” “anticipate,” “will”, “believe”, “potential” and similar expressions are intended to identify forward-looking statements, which, by their very nature, are not guarantees of the Company’s future operational or financial performance, and are subject to risks and uncertainties and other factors that could cause the Company’s actual results, performance, prospects or opportunities to differ materially from those expressed in, or implied by, these forward-looking statements. These risks, uncertainties and factors may include, but are not limited to: unavailability of financing, failure to identify commercially viable mineral reserves, fluctuations in the market valuation for commodities, difficulties in obtaining required approvals for the development of a mineral project, increased regulatory compliance costs, expectations of project funding by joint venture partners and other factors.

Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this news release or as of the date otherwise specifically indicated herein. Due to risks and uncertainties, including the risks and uncertainties identified in this news release, and other risk factors and forward-looking statements listed in the Company’s MD&A for the quarter ended September 30, 2021 (the “MD&A”), and the most recently filed Annual Information Form (“AIF”) for the year ended December 31, 2020, actual events may differ materially from current expectations. More information about the Company, including the MD&A, the AIF and financial statements of the Company, is available on SEDAR at www.sedar.com and on the SEC’s EDGAR website at www.sec.gov.

Categories
Base Metals Energy Junior Mining Nevada Copper Noram Lithium

Location-Location-Location Applies To The Quest For Battery Metals | Nevada Copper and Noram Lithium

  • Battery metal demand is rising, and the trend will continue
  • New properties are in demand- Producers provide leverage to the metal prices, and exploration companies turbocharge the gearing- Location is critical
  • Lithium Americas (LAC) looks to pick up a property
  • Nevada Copper (NEVDF)- The trend is your friend, and increasing demand for EVs supports a continuation of the rally

Noram Lithium (NRVTF)- An undervalued battery metal play in Nevada, a desirable jurisdiction

In real estate, a property’s value always reflects its location. Any real estate professional understands that the three leading value factors are location-location-location. 

Commodity producers face many regional issues. Raw materials can occur in local regions where political or economic forces make extraction challenging. The cost of production reflects local tax, royalty, logistical, and other factors.

Over the past year, the ascent of metals prices has caused many of the world’s leading producers to scramble to find new mining projects to meet the growing demand. One of the world’s leading diversified commodity producers, BHP is currently in talks with Ivanhoe Mines to acquire part of the Western Foreland exploration area in the Democratic Republic of the Congo (DRC). While DRC is the largest copper producer in Africa with the most substantial reserves, the country has a long history of corruption that has impeded its growth. The DRC is not an ideal location for mining companies, but the growing need for new output has put BHP in a position to consider the project. It takes up to ten years to bring a new copper mine into production, and producers are scouring the earth for projects that will meet the increasing demand.

Goldman Sachs called copper “the new oil” because of its role in decarbonization. Three-month LME copper was trading at the $9,518 per ton level on November 5, with the December COMEX copper futures at the $4.3430 per pound level. Goldman projects that copper prices could rise to the $15,000 per ton level by 2025, putting COMEX copper futures north of the $6.80 per pound level.  

Meanwhile, lithium is another commodity that is experiencing growing demand. The success of addressing climate change through decarbonization relies on ample supplies of battery metals that can replace fossil fuels.

While BHP is looking to the DRC for new copper deposits, other mining and exploration companies are developing battery metal deposits. Friendlier and less challenging jurisdictions are likely to attract significant premiums over the coming months and years.

In the US, Nevada, the silver state, has a long history as one of the most favorable mining jurisdictions on the earth. When it comes to location, it does not get much better than Nevada.

Battery metal demand is rising, and the trend will continue

Climate change is not a US issue; it is a worldwide trend. Addressing climate change involves replacing the hydrocarbons that currently power the world with alternative, renewable energy sources. While batteries power only around one percent of the cars on roads today, the demand for EVs is growing by leaps and bounds. Hertz recently announced they are purchasing 100,000 Tesla model-3 EVs in a $4.2 billion deal. EVs will make up 20% of the Hertz fleet by the end of 2022. Hertz will also install thousands of charging stations in its locations in the US and Europe.

EV’s require twice the copper as internal combustion engines. The batteries require other metals and minerals including, lithium, nickel, cobalt, zinc, aluminum, manganese, graphite, and potassium. Tesla’s batteries currently use lithium-nickel-cobalt-aluminum chemistry. However, the company is working on a set of cobalt-free or reduced batteries drawing on lithium-iron-phosphate technology and chemistries that rely more heavily on nickel. The three-month nickel price on the London Metals Exchange closed 2020 at the $16,600 per ton level. As of November 4, the price was over $19,400 after reaching over $20,500 during the year. Copper futures on COMEX may have corrected from the May 2021 all-time high at nearly $4.90 per pound, but they remain appreciably higher than at the end of 2020.

Source: CQG

The monthly chart shows that copper closed 2020 at the $3.52 level. At the $4.3430 per pound level in early November 2021, copper futures were over 23% higher. The price action in the lithium carbonate market has been even more bullish.

Source: Trading Economics

The chart shows the rise from below $33,000 per ton in 2020 to the current price at the $194,500 level, an increase of nearly six times. Lithium’s ascent is more like a cryptocurrency than a commodity as the demand for the metal for EV production grows.

New properties are in demand- Producers provide leverage to the metal prices, and exploration companies turbocharge the gearing- Location is critical

Mining companies make substantial capital investments to extract raw materials from the earth’s crust. The leading mining companies profit handsomely when market prices exceed production costs, creating leverage. Mining companies often outperform the commodities they produce on the upside but underperform when prices decline.

Meanwhile, exploration companies provide even more leverage. Since rewards are always a function of the risks, companies that search for commodities tend to experience incredible gains when they find them and begin production or sell the properties to the more established mining companies that can take projects to the next production and processing levels.

The mining industry reflects economies of scale. The leading companies like BHP, Rio Tinto, Anglo American, Glencore, and others have made significant capital investments and spread production risks over a diversified portfolio of mining properties. They tend to allow exploration companies to make the finds and then take the mining properties to the next steps.

When it comes to investing, exploration companies can offer attractive returns that often outpace the underlying commodity and the established miners on a percentage basis. If the BHP’s offer leverage, exploration companies turbocharge that gearing.  

Lithium Americas (LAC) looks to pick up a property

Lithium Americas Corporation (LAC) operates as a resource company in the United States. The company explores for lithium deposits. LAC owns interests in the Cauchari-Olaroz Project in the Jujuy province of Argentina and the Thacker Pass project in north-western Humboldt County, Nevada. Thacker Pass recently increased its Phase 1 capacity to target 40,000 tpa lithium carbonate.

LAC announced it submitted an unconditional offer to Millennial Lithium Corporation to acquire all of the outstanding shares for approximately $400 million.

Source: Barchart

The chart shows LAC’s ascent from a low of $1.92 per share in March 2020 to its most recent high of $33.42 on November 4. At the $32.67 per share level, LAC’s market cap was over $3.919 billion. An average of over five million shares changes hands each day. Lithium has been a hot commodity that has moved nearly six times since 2020. LAC shares have moved over seventeen times higher over the period as the successful mining company turbocharged the commodity’s percentage gain.

Nevada Copper (NEVDF)- The trend is your friend, and increasing demand for EVs supports a continuation of the rally

Nevada Copper is an exploration company in the silver state of Nevada. The company owns a 100% interest in the Pumpkin Hollow property that contains copper, gold, and silver reserves. The most recent operations update highlighted accelerated stope turnover rates, management team changes that strengthened the company, productivity improvements, and processing of ore averaging approximately 1.5% copper delivered to the mill. Since the May high, copper’s price has dropped at nearly $4.90 per pound on the nearby COMEX futures contract. NEVDF is an exploration company, so its share performance tends to outperform the commodity on the upside and underperform on the downside. Copper rose from $3.52 per pound at the end of 2020 to a high of $4.8985 in May or 39.2%. On November 5, the price was at the $4.3430 level, 11.3% below the May peak. NEVDF shares closed 2020 at the $1.14 level.

Source: Barchart

The chart highlights that NEVDF shares reached a high of $2.71 when copper peaked and traded at 67.00 cents per share on November 5. NEVDF shares rallied by 137.7% and from the end of 2020 to the May 2021 high and were 75.3% lower than the peak as of November 5. Like many exploration companies, NEVDF turbocharged the price action in copper, outperforming the metal on the upside and underperforming on the downside.

As the demand for copper will rise over the coming years, and Goldman Sachs expects the price to increase dramatically, now could be the perfect time to consider this exploration company.

Noram Lithium (NRVTF)- Another battery metal play in Nevada, a desirable jurisdiction

Norman Lithium (NRVTF) is an exploration company that develops mineral properties in the United States.
The company owns interests in the Zeus Lithium Project in Clayton Valley, Nevada. Noram’s property is next door to Albemarle Corporation’s (ALB)  Silver Peak Lithium Mine in Nevada. 

Noram’s latest highlights include:

  • A 70% increase in measured and indicated resources
  • A 369% increase in inferred resources
  • Deposits near the surface, reducing production costs
  • The potential to increase the deposit size via deeper drilling
  • An environmentally friendly footprint
  • A Preliminary Economic Assessment (PEA) in the coming weeks – Advancing the project closer to its’ production target

At the 67.15 cents per share level, NRVTF has a market cap at the $50.701 million level. An average of 56,780 shares changes hands each day.

Source: Barchart

The chart shows NRVTF shares closed at the 40.26 cents level on December 31, 2020. At 66.87 on November 5, they were 66.1% higher. NRVTF shares reached a high of 98.78 cents on January 14, 2021, which is the stock’s current technical target. The shares have traded in a bullish trend since mid-April 2021.

With the spotlight on lithium, Norman could be an excellent exploration company to consider. Success in the Zeus project could attract interest from companies like Lithium Americas Corporation (LAC) that is currently buying Millennial Lithium Corporation’s shares for $400 million, nearly eight times higher than NRVTF’s current market cap.

Exploration companies are risky, but the potential for substantial rewards always involves an elevated risk level. Meanwhile, Nevada Copper and Noram Lithium have location on their sides as Nevada is a highly desirable mining jurisdiction in a world hungry for copper and lithium supplies.

Written By: Andrew Hecht, on behalf of Maurice Jackson of Proven and Probable.

Any investment involves substantial risks, including, but not limited to, pricing volatility, inadequate liquidity, and the potential complete loss of principal. This document does not in any way constitute an offer or solicitation of an offer to buy or sell any investment, security, or commodity discussed herein, or any security in any jurisdiction in which such an offer would be unlawful under the securities laws of such jurisdiction.

Categories
Base Metals Energy Granite Creek Copper Junior Mining Metallic Group

Granite Creek Copper Retains SGS for 43-101 Mineral Resource Update on Carmacks Deposit in Yukon, Canada

VANCOUVER, BC / ACCESSWIRE / November 10, 2021 / Granite Creek Copper Ltd. (TSXV:GCX)(OTCQB:GCXXF) (“Granite Creek” or the “Company“) is pleased to announce the retention of SGS Geological Services (‘SGS”) to provide an updated National Instrument 43-101 mineral resource estimate on the Company’s Carmacks copper-gold-silver deposit in the Minto Copper Belt located in central Yukon, Canada.

Granite Creek will be incorporating drilling completed in 2017, 2020 and 2021 into an updated resource estimate which will build on the existing NI 43-101 compliant resources last published in 20171,2. Resource expansion drilling completed in 2021 consisted of 22 diamond drill holes primarily targeted at sulfide mineralization in Zones 1, 2000S and 13 and is expected to add to the existing sulfide resource (see news release dated October 28, 2021).

Table 1. Current Mineral Resource Estimate on the Carmacks Copper Project

CategoryTonnes (000)Cu (%)Au (g/t)Ag (g/t)
Oxide & Transition MineralizationMeasured6,4840.860.414.24
Indicated9,2060.970.363.80
M&I15,6900.940.383.97
Inferred9130.450.121.90
Sulphide MineralizationMeasured1,3810.640.192.17
Indicated6,6870.690.172.34
M&I8,0680.680.182.33
Inferred8,4070.630.151.99

About SGS Geological Services

SGS Geological services has a very strong team, with valuable experience, known, renown and respected in the international mining industry. The team has considerable experience in estimation and modeling of deposits of all types and practical and theoretical experience having realized hundreds of assessments for clients. A multidisciplinary group of qualified persons with a strong understanding of the disclosure requirements for Mineral Resources set out in the NI 43-101 Standards of Disclosure for Mineral Projects (2016), CIM Definition Standards – For Mineral Resources and Mineral Reserves (2014) and a strong understanding of the CIM Estimation of Mineral Resources & Mineral Reserves Best Practice Guidelines 2019.

Resource Road Update

On November 8th the Yukon government announced the following road construction update that directly effects Granite Creek’s Carmacks Project.

“Whitehorse based company Pelly Construction has been awarded the contract for the Carmacks Bypass Project, a $29.6 million investment to construct a new road and bridge near Carmacks. This project is a key component under the Yukon Resource Gateway Program and a collaborative effort between the Government of Yukon and Little Salmon/Carmacks First Nation.

The project, which is anticipated to be complete in 2024, will allow industrial vehicles to bypass the community of Carmacks, creating an enhanced and safer flow of traffic for residents. It will also improve access to mining activities while enabling the Little Salmon/Carmacks First Nation to benefit from contracting, education and training benefits associated with the project.

The Yukon Resource Gateway Program improves infrastructure to Yukon’s most mineral-rich areas. The Carmacks Bypass project is jointly funded by Canada and the Yukon and is the first project to be awarded under the program.”

Granite Creek President & CEO, Tim Johnson, commented, “We are very pleased to have engaged with a top calibre firm like SGS on this key milestone in the Company’s relatively short history. With the amount of highly targeted new drilling we have completed, we anticipate a robust update to the existing resource estimate and that this, along with the mine planning and trade-off studies being developed by Sedgman and Mining Plus, will have a significant impact on the project economics. In our continuing development of Carmacks, the recent announcement by the Yukon government of the start of construction on the Carmacks Bypass is extremely good news. The incremental improvement in access represented by this road upgrade is welcomed and this, combined with an updated resource estimate, will pave the way for and even more extensive exploration program in 2022.”

[1] JDS Energy and Mining. Feb 9, 2017. NI 43-101 Preliminary Economic Assessment Technical Report on the Carmacks Project, Yukon, Canada. Contained metal based on 23.76 million tonnes of NI 43-101 compliant resources in the Measured and Indicated categories grading 0.85% Cu, 0.31 g/t Au, 3.14 g/t Ag.

[2] Arseneau Consulting Services, 2016 Independent Technical Report on the Carmacks Copper Project, Yukon, Canada.

About Granite Creek Copper

Granite Creek, a member of the Metallic Group of Companies, is a Canadian exploration company focused on the 176 square kilometer Carmacks project in the Minto copper district of Canada’s Yukon Territory. The project is on trend with the high-grade Minto copper-gold mine, operated by Minto Explorations Ltd, to the north, and features excellent access to infrastructure with the nearby paved Yukon Highway 2, along with grid power within 12 km. More information about Granite Creek Copper can be viewed on the Company’s website at www.gcxcopper.com.

FOR FURTHER INFORMATION PLEASE CONTACT:

Timothy Johnson, President & CEO
Telephone: 1 (604) 235-1982
Toll-Free: 1 (888) 361-3494
E-mail: info@gcxcopper.com
Website: www.gcxcopper.com
Metallic Group: www.metallicgroup.ca

Qualified Person

Ms. Debbie James, P.Geo., a qualified person for the purposes of National Instrument 43-101, has reviewed and approved the technical disclosure contained in this news release.

Forward-Looking Statements

This news release includes certain statements that may be deemed “forward-looking statements”. All statements in this release, other than statements of historical facts including, without limitation, statements regarding potential mineralization, historic production, estimation of mineral resources, the realization of mineral resource estimates, interpretation of prior exploration and potential exploration results, the timing and success of exploration activities generally, the timing and results of future resource estimates, permitting time lines, metal prices and currency exchange rates, availability of capital, government regulation of exploration operations, environmental risks, reclamation, title, and future plans and objectives of the company are forward-looking statements that involve various risks and uncertainties. Although Granite Creek Copper believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the companies with securities regulators. Readers are cautioned that mineral resources that are not mineral reserves do not have demonstrated economic viability. Mineral exploration and development of mines is an inherently risky business. Accordingly, the actual events may differ materially from those projected in the forward-looking statements. For more information on Granite Creek Copper and the risks and challenges of their businesses, investors should review their annual filings that are available at www.sedar.com.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE: Granite Creek Copper Ltd.



View source version on accesswire.com:
https://www.accesswire.com/672206/Granite-Creek-Copper-Retains-SGS-for-43-101-Mineral-Resource-Update-on-Carmacks-Deposit-in-Yukon-Canada

https://s.yimg.com/rq/darla/4-9-0/html/r-sf-flx.htmlhttps://openweb.jac.yahoosandbox.com/0.8.1/safeframe.html

Categories
Base Metals Energy Junior Mining

Drilling Completed on Second Target at Playfair’s RKV Copper Project, Norway

Vancouver, British Columbia–(Newsfile Corp. – November 10, 2021) – Playfair’s (TSXV: PLY) (FSE: P1J1) (OTC Pink: PLYFF) extensive drill program on its large (201 square kilometers) 100% RKV Copper Project in South Central Norway has successfully completed seven short holes totaling 385.1 metres to test the Storboren target identified by using a combination of Artificial Intelligence (CARDS) and Mobile Metal Ion (MMI) geochemistry. Drilling at Rødalen was reported in Playfair’s October 8, 2021 News Release.

At Storboren drillhole STB-21-07 encountered at least 6 sulphide zones ranging from 20 cm to 1.5 metres wide within a previously unknown ultramafic intrusive. Sulphides are mostly pyrrhotite with lesser pyrite and chalcopyrite.



NQ core with sulphides in drillhole STB-21-007 at Storborenhttps://s.yimg.com/rq/darla/4-9-0/html/r-sf-flx.html

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/7302/102756_b432c24794c05848_002full.jpg

Samples have been cut and sent for analysis. Preparation will be at the Malå, Sweden ALS laboratory with analysis at the Loughrea, Ireland ALS laboratory. ALS Minerals is internationally recognized as the global leader in providing geochemical sample preparation, analytical procedures, and data management solutions, with its European hub lab based in Loughrea, Co. Galway.

A total of 99 samples have been submitted and comprised 36 core samples from Rødalen, 60 core samples from Storboren and 3 rock samples.

Playfair will consider future exploration at Rødalen and Storboren once analytical results have been received. Drill testing of the remaining five targets will resume in the Spring.

Promin AS, a Trondheim-based consultancy with extensive experience in the Norwegian Mining industry, provides logistical support and experienced geologists. Helge Rushfeldt assisted greatly in the start-up of the drill program. Kjell Nilsen, one of Norway’s most experienced field geologists who discovered Nussir, Norway’s largest known copper deposit, and Jonas Dombrowski are directly supervising the drilling, core logging and analysis.



Geologists Kjell Nilsen and Jonas Dombrowski examining drillcore

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/7302/102756_b432c24794c05848_003full.jpg

The man portable drill team is supervised by Canadian drillers (No Limit Diamond Drilling) for Arctic Drilling (based in Finnmark). Local “Muskelgutta” (Muscle Guys) have risen to the challenge of moving the man portable drill. Local community support is greatly appreciated.

In keeping with Playfair’s intent to minimise the impact of its exploration on the natural environment Playfair is using a lightweight drilling machine which can be disassembled and hand-carried to the drill sites. Although lightweight the drill is capable of drilling to 150m depth using BQ sized rods (36.5 mm or 1.437 inches core diameter) and to 100m depth using NQ sized rods (47.8mm or 1.872 inches core diameter).

All seven drill targets show compelling coherent MMI Cu anomalies with multiple MMI Cu values greater than 6,000 ppb. The highest value recorded was 53,300 ppb MMI Cu. A short MMI Report by SGS states that values greater than 6,000 ppb MMI Cu “are likely to be associated with weathering copper sulphides”.



Hillside drill collar location for SB-21-07 at Storboren

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/7302/102756_b432c24794c05848_004full.jpg

Overall management and execution of Playfair’s RKV drilling program is provided by Ronacher McKenzie Geoscience Inc., an independent consulting group, who, as part of their supervision, will ensure that appropriate quality assurance/quality control (QA/QC) protocols are in place. RMG follows the Canadian Institute of Mining, Metallurgy and Petroleum’s (CIM) Best Practices.

In Norway, Reidar Gaupås, Playfair’s representative, continues to assist Playfair within the local community and enhance Playfair’s profile in Norway.



RKV Project, Norway – 2021 Planned Drill Areas

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/7302/102756_b432c24794c05848_005full.jpg



RKV Copper Project, Norway – Drill Targets

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/7302/102756_b432c24794c05848_006.jpg

The drill targets are MMI (Mobile Metal Ion) copper anomalies discovered by sampling target areas generated by Windfall Geotek (TSXV: WIN) (OTCQB: WINKF) using their proprietary Computer Aided Resources Detection System (CARDS).

The seven drill targets were described previously: Storboren (November 07, 2019, and December 05, 2019, News Releases), Sæterfjellet, (January 06, 2021, News Release), Kletten North and Kletten South (January 28, 2021, News Release), Røstvangen Northeast and Røstvangen Southwest (February 17, 2021, News Release) and Rødalen (March 11, 2021, News Release).

A presentation on the drilling plans can be found at this direct link or on Playfair’s website.

The technical contents of this release were approved by Greg Davison, PGeo, a qualified person as defined by National Instrument 43-101.

The road to a cleaner environment includes electric vehicles. Electric vehicles need copper, nickel, and cobalt. There is no green future without minerals.

For further information visit our website at www.playfairmining.com or contact:

Donald G. Moore
CEO and Director
Phone: 604-377-9220
Email: dmoore@wascomgt.com

D. Neil Briggs
Director
Phone: 604-562-2578
Email: nbriggs@wascomgt.com

Forward-Looking Statements: This Playfair Mining Ltd News Release may contain certain “forward-looking” statements and information relating to Playfair which are based on the beliefs of Playfair management, as well as assumptions made by and information currently available to Playfair management. Such statements reflect the current risks, uncertainties and assumptions related to certain factors including, without limitations, exploration and development risks, expenditure and financing requirements, title matters, operating hazards, metal prices, political and economic factors, competitive factors, general economic conditions, relationships with vendors and strategic partners, governmental regulation and supervision, seasonality, technological change, industry practices, and one-time events. Should any one or more of these risks or uncertainties materialize or change, or should any underlying assumptions prove incorrect, actual results and forward-looking statements may vary materially from those described herein.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Categories
Energy Junior Mining Precious Metals

Dolly Varden Silver Strengthens Technical Team with Andrew Hamilton, P.Geo.

VANCOUVER, BC, Nov. 9, 2021 /PRNewswire/ – Dolly Varden Silver Corporation (“Dolly Varden” or the “Company“) (TSXV: DV) (OTC: DOLLF), is pleased to announce that Andrew Hamilton, P.Geo. has joined the Company as Senior Geologist.

Dolly Varden Silver Corp Logo (CNW Group/Dolly Varden Silver Corp.)
Dolly Varden Silver Corp Logo (CNW Group/Dolly Varden Silver Corp.)

Mr. Hamilton is an exploration geologist with over 30 years of mineral exploration experience, primarily in British Columbia, Nunavut, the Yukon and Mexico, with a focus on gold and copper-gold projects. He brings additional grass roots to advanced stage mineral exploration experience to Dolly Varden with a focus on drill program design and management, mineral resource modelling and estimation, QAQC and data management.

Andrew has been part of technical teams of multiple successful explorers that have transitioned from exploration to production as well as company sale, including Wheaton River Minerals’ Golden Bear Mine, Cumberland Resources’ Meadowbank Project and IDM Mining’s Red Mountain Project. He was mostly recently the Exploration Manager for White Gold Corp. for their Yukon projects.

As an Independent Qualified Person, he has co-authored numerous NI 43-101 Reports and Resource Estimates, as well as audits and reviews of producing Companies Mineral Resources and Reserves and QA/QC. Mr. Hamilton has been lauded in the mining industry for his conservative and balanced approach.

Shawn Khunkhun, Dolly Varden’s CEO, commented: “I am pleased to welcome Andrew to Dolly Varden. His advanced exploration experience in the Golden Triangle, expertise in the design of drill programs for resource delineation and expansion, as well as critical project evaluation skills will complement our current technical team and benefit the Company as we look to dramatically grow in the next two years.”

Mr. Hamilton holds a Bachelor of Science degree in geological sciences from the University of British Columbia and a Bachelor of Arts degree in anthropology from the University of Victoria. He is a registered professional geoscientist (P.Geo.) in the province of British Columbia.

About Dolly Varden Silver Corporation

Dolly Varden Silver Corporation is a mineral exploration company focused on exploration in northwestern British Columbia. Dolly Varden has two projects, the namesake Dolly Varden silver property and the nearby Big Bulk copper-gold property. The Dolly Varden property is considered to be highly prospective for hosting high-grade precious metal deposits, since it comprises the same structural and stratigraphic setting that host numerous other high-grade deposits (Eskay Creek, Brucejack). The Big Bulk property is prospective for porphyry and skarn style copper and gold mineralization similar to other such deposits in the region (Red Mountain, KSM, Red Chris).

Forward Looking Statements

This release may contain forward-looking statements or forward-looking information under applicable Canadian securities legislation that may not be based on historical fact, including, without limitation, statements containing the words “believe”, “may”, “plan”, “will”, “estimate”, “continue”, “anticipate”, “intend”, “expect”, “potential” and similar expressions. Forward-looking statements involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance, or achievements of Dolly Varden to be materially different from any future results, performance, or achievements expressed or implied by the forward-looking statements. Forward looking statements or information relates to, among other things, completion of the Offering, Exchange approval of the Offering, the use of proceeds with respect to the Offerings, the results of previous field work and programs and the continued operations of the current exploration program, interpretation of the nature of the mineralization at the project and that that the mineralization on the project is similar to Eskay and Brucejack, results of the mineral resource estimate on the project, the potential to grow the project, the potential to expand the mineralization, the planning for further exploration work, the ability to de-risk the potential exploration targets, and our beliefs about the unexplored portion of the property. These forward-looking statements are based on management’s current expectations and beliefs but given the uncertainties, assumptions and risks, readers are cautioned not to place undue reliance on such forward-looking statements or information. The Company disclaims any obligation to update, or to publicly announce, any such statements, events or developments except as required by law.

For additional information on risks and uncertainties, see the Company’s most recently filed annual management discussion & analysis (“MD&A”), which is available on SEDAR at www.sedar.com. The risk factors identified in the MD&A are not intended to represent a complete list of factors that could affect the Company.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX-V) accepts responsibility for the adequacy or accuracy of this news release.

Cision
Cision

View original content to download multimedia:https://www.prnewswire.com/news-releases/dolly-varden-silver-strengthens-technical-team-with-andrew-hamilton-pgeo-301419484.html

SOURCE Dolly Varden Silver Corp.

Categories
Base Metals Energy Junior Mining MillRock Resources Precious Metals Project Generators

Millrock Announces Option Agreement With Mine Discovery Fund for El Batamote Copper Project, Sonora, Mexico

Figure 1. Project location map.

Figure 1. Project location map.
Figure 1. Project location map.
Figure 1. Project location map.

Figure 2. Prospect Location Map

Figure 2. Prospect Location Map
Figure 2. Prospect Location Map
Figure 2. Prospect Location Map

VANCOUVER, British Columbia, Nov. 08, 2021 (GLOBE NEWSWIRE) — Millrock Resources Inc. (TSX-V: MRO, OTCQB: MLRKF) (“Millrock” or the “Company”) is pleased to announce it has signed a binding letter agreement (“Letter Agreement”) with Mine Discovery Fund Pty. Ltd. (“MDF”) concerning its El Batamote porphyry copper exploration project in Mexico. MDF is a private Australian company. In good faith, MDF has made an initial US$50,000 cash payment upon signing the Letter Agreement. A definitive agreement (“Definitive Agreement”) has been prepared will be signed immediately following the formation of a Mexico subsidiary company by MDF. MDF has placed Batamote into a wholly-owned subsidiary company called Latin America Copper Limited(“LatCopper”) along with other assets in Chile. MDF indicates it has commenced compliance documentation for a potential ASX or TSX listing in the first half of 2022.

Millrock President and CEO Gregory Beischer commented: “Batamote has excellent potential to discover a porphyry copper deposit. We know already that breccia-style and porphyry copper mineralization is present. We are particularly excited to drill-test beneath what appears to be a leach cap alteration zone at a prospect called El Choclo NW. The project is situated within a belt that has produced very large porphyry copper deposits being mined by others as evidenced by the Cananea and La Caridad mines.”

Latin American Copper Director Joseph Webb commented: “With the addition of El Batamote, LatCopper has three exceptional cornerstone exploration assets with evidence of Tier 1 scale potential in the globally significant copper belts of Latin America. El Batamote is 25 kilometers northwest of Grupo Mexico’s La Caridad copper mine (5.98 billion tonnes at 0.34% copper equivalent) with an untested leach cap identified along strike from known mineralisation. This indicates potential for supergene mineralisation at Choclo. The Bata Sur definitive mineralised porphyry system intersected by historic drilling remains open along strike.”

Under the terms of the Definitive Agreement, LatCopper will have the option to purchase a 100% interest in the concessions that underlie the Batamote copper project. To earn the interest, LatCopper will have to make cash payments totalling US$1,000,000 over five years, execute US$6,000,000 dollars in exploration work, and pay Millrock US$250,000 in shares when LatCopper becomes a publicly listed company. In the event that LatCopper exercises the option to purchase the Batamote project, annual advanced minimum royalty (“AMR”) payments will be triggered. The first payment will be US$50,000 and the payment will increase by US$50,000 each year until a cap of US$500,000 is reached. Annual payments will then remain at the capped level until a mine reaches commercial production. At that point, a Net Smelter Return production royalty of 1.0% will be triggered. Any AMR payments made by LatCopper can be credited against production royalty payments.

About the El Batamote Project

The project is located 100 kilometers south of the Sonora – Arizona border and 140 kilometers north of the mining hub of Hermosillo in northeastern Sonora State, Mexico. The project is fully accessible by road and covers nearly 4,000 hectares. Millrock previously purchased the concessions and historical exploration data from a subsidiary of Teck Resources Ltd., as announced by Millrock in a November 2015 press release. The project is situated within the Cananea-La Caridad Copper Porphyry belt (Figure 1). This district-scale structural trend is situated within the larger North American porphyry copper province containing over 20 copper-molybdenum deposits and mines in Arizona, New Mexico, and Sonora.

Figure 1. Project location map is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/639437fc-1d2c-4f6a-9a1c-b6e6ac47e702.

El Batamote contains alteration and geochemistry characteristics of a Cu-Mo porphyry system. Important historical work has been conducted on the property by large companies such as Phelps Dodge, BHP, Noranda, Peñoles, and Teck. Abundant information was generated by prior workings in the south and central part of the claim block and includes regional and semi-detail mapping, geochemistry, petrography, spectrometry, geophysics and drilling with more than 10,000 meters of diamond core having been drilled.

The exploration led to the discovery of several key prospects: Bata Sur, El Choclo NW and El Choclo West (Figure 2). Review of the historic data has led Millrock geologists to make new exploration observations, conclusions, and recommendations. Preliminary plans include geophysical surveys at El Choclo NW, where a possible leach cap is situated adjacent to known porphyry mineralization. No drilling has been done beneath the alteration zone. At the Bata Sur prospect, breccia pipe style mineralization has been intersected by prior drilling. Drilling is recommended to test for higher grade and to test previously untested geochemical anomalies. Millrock has drilling permits in hand.

Figure 2. Prospect Location Map is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/b48bb9da-f767-4ecf-af5b-4b76c395f052.

The lithology and alteration at Batamote are similar to that found at the La Caridad and Cananea mines. The mining concession covers Late Cretaceous Laramide age intermediate composition volcanic sequences which are intruded by a large, multi-phase batholith with multiple, mineralized porphyry pulses along a northwest-trending structural corridor. Porphyry dikes cut the system and are followed by later, mid-Tertiary post-mineral tuffaceous rocks, all of which are cut by long-lived northeast-trending and north-south fault structures. Intermediate volcanic rocks are the main host to copper mineralization. These rocks contain strong hydrothermal alteration related to porphyry-type systems in a three-kilometer by six-kilometer area that on the west side, is truncated by north-west to north-south trending post-mineral faults. Quaternary gravels cover bedrock west of these faults, but porphyry mineralization may be concealed below as potentially indicated by geophysical surveys at Choclo W.

Qualified Person
The scientific and technical information disclosed within this document has been prepared, reviewed, and approved by Gregory A. Beischer, President, CEO, and a director of Millrock Resources. Mr. Beischer is a qualified person as defined in NI 43-101.

About Millrock Resources Inc.
Millrock Resources Inc. is a premier project generator to the mining industry. Millrock identifies, packages, and operates large-scale projects for joint venture, thereby exposing its shareholders to the benefits of mineral discovery without the usual financial risk taken on by most exploration companies. The company is recognized as the premier generative explorer in Alaska, holds royalty interests in British Columbia, Canada, and Sonora State, Mexico, is a significant shareholder of junior explorer ArcWest Exploration Inc. and owns a large shareholding in Resolution Minerals Limited. Funding for drilling at Millrock’s exploration projects is primarily provided by its joint venture partners. Business partners of Millrock have included some of the leading names in the mining industry: EMX Royalty, Coeur Explorations, Centerra Gold, First Quantum, Teck, Kinross, Vale, Inmet and, Altius as well as junior explorers Resolution, Riverside, PolarX, Felix Gold, Tocvan, and now Mine Discovery Fund.

About Mine Discovery Fund
Mine Discovery Fund (MDF) is a private investment vehicle backed by some of the industry’s leading technical advisors and professional mining investors. MDF focus is on Tier 1 orebody discovery in the jurisdictions that provide the highest probability of exploration success (in the most fertile Tier 1 Belts and in areas with clear pathways for development potential.

ON BEHALF OF THE BOARD
“Gregory Beischer”
Gregory Beischer, President & CEO

FOR FURTHER INFORMATION, PLEASE CONTACT:
Melanee Henderson, Investor Relations
Toll-Free: 877-217-8978 | Local: 604-638-3164
Twitter | Facebook | LinkedIn

Some statements in this news release may contain forward-looking information (within the meaning of Canadian securities legislation) including without limitation the intention to mount further exploration including drilling in 2021 and 2022, and the intention to enter a definitive agreement with Mine Discovery Fund. These statements address future events and conditions and, as such, involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the statements.

Categories
Base Metals Energy Junior Mining Nevada Copper

Nevada Copper Provides Update on Accelerating Stope Production and Ramp-Up Progress

YERINGTON, Nev., Nov. 08, 2021 (GLOBE NEWSWIRE) — Yerington, NV – November 8, 2021 – Nevada Copper Corp. (TSX: NCU) (OTC: NEVDF) (FSE: ZYTA) (“Nevada Copper” or the “Company”) today provided a further update on positive October operational performance at the Company’s underground mine at its Pumpkin Hollow Project (the “Underground Mine”).

October Operational Highlights

  • Consistent Progress on Stoping
    • Stoping rates continue to accelerate, with four stopes mined in H2 2021, including the most recent stope with an estimated grade of over 2% Cu.
    • Mining of the higher-grade Sugar Cube zone is planned to begin next month. This will be the first stope mined in the East North area which is expected to have significantly larger stope sizes.
  • Dike Heading Progressing
    • The lateral development beyond the completed first dike crossing is progressing at targeted rates. The geotechnical information learned from this crossing has been implemented on the second dike heading, which is now advancing well. This and the first heading will provide access to additional stopes adding to the Company’s growing stope inventory in H1 2022.
  • Surface Ventilation Fans
    • The surface ventilation fans are scheduled to arrive in late Q4 of this year and are expected to be commissioned on time in line with the requirements of the mine plan as Underground Mine development progresses towards completion of the ramp up.
  • Hiring Nearing Completion
    • The Company is nearing completion of hiring key mining technical positions, with a new mine manager now onboarded and a technical services manager expected to be hired in November.
    • A Project Management Office has now been established on site in order to efficiently complete the remaining key infrastructure items, including the surface ventilation fans and an additional ore pass.

Randy Buffington, President and Chief Executive Officer, commented: “I am very pleased with the progress the team has made through the end of October and to date. The accelerated stope delivery we are starting to see should increase as we continue to benefit from the improving contractor performance levels which has been facilitated by key management hirings and the implementation of enhanced management systems at Pumpkin Hollow.”

Qualified Persons

The technical information and data in this news release was reviewed by Greg French, C.P.G., VP Head of Exploration of Nevada Copper, and Neil Schunke, P.Eng., a consultant to Nevada Copper, who are non-independent Qualified Persons within the meaning of NI 43-101.

About Nevada Copper

Nevada Copper (TSX: NCU) is a copper producer and owner of the Pumpkin Hollow copper project. Located in Nevada, USA, Pumpkin Hollow has substantial reserves and resources including copper, gold and silver. Its two fully permitted projects include the high-grade Underground Mine and processing facility, which is now in the production stage, and a large-scale open pit project, which is advancing towards feasibility status.

NEVADA COPPER CORP.
www.nevadacopper.com
Randy Buffington, President and CEO

For further information contact:
Rich Matthews, Investor Relations
Integrous Communications
rmatthews@integcom.us
+1 604 757 7179

Cautionary Language

This news release includes certain statements and information that constitute forward-looking information within the meaning of applicable Canadian securities laws. All statements in this news release, other than statements of historical facts are forward-looking statements. Such forward-looking statements and forward-looking information specifically include, but are not limited to, statements that relate to mine development, production and ramp-up objectives and equipment installation.

Forward-looking statements and information include statements regarding the expectations and beliefs of management. Often, but not always, forward-looking statements and forward-looking information can be identified by the use of words such as “plans”, “expects”, “potential”, “is expected”, “anticipated”, “is targeted”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates”, or “believes” or the negatives thereof or variations of such words and phrases or statements that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved. Forward-looking statements or information should not be read as guarantees of future performance and results. They are subject to known and unknown risks, uncertainties and other factors which may cause the actual results and events to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements or information.

Such risks and uncertainties include, without limitation, those relating to: the ability of the Company to complete the ramp-up of the Underground Mine within the expected cost estimates and timeframe; requirements for additional capital and no assurance can be given regarding the availability thereof; the impact of the COVID-19 pandemic on the business and operations of the Company; the state of financial markets; history of losses; dilution; adverse events relating to milling operations, construction, development and ramp-up, including the ability of the Company to address underground development and process plant issues; failure to obtain the effectiveness of extensions under and amendments to the Company’s amended and restated senior credit facility with KfW IPEX-Bank; ground conditions; cost overruns relating to development, construction and ramp-up of the Underground Mine; loss of material properties; interest rates increase; global economy; limited history of production; future metals price fluctuations; speculative nature of exploration activities; periodic interruptions to exploration, development and mining activities; environmental hazards and liability; industrial accidents; failure of processing and mining equipment to perform as expected; labor disputes; supply problems; uncertainty of production and cost estimates; the interpretation of drill results and the estimation of mineral resources and reserves; changes in project parameters as plans continue to be refined; possible variations in ore reserves, grade of mineralization or recovery rates from management’s expectations and the difference may be material; legal and regulatory proceedings and community actions; accidents; title matters; regulatory approvals and restrictions; increased costs and physical risks relating to climate change, including extreme weather events, and new or revised regulations relating to climate change; permitting and licensing; volatility of the market price of the Company’s securities; insurance; competition; hedging activities; currency fluctuations; loss of key employees; other risks of the mining industry as well as those risks discussed in the Company’s Management’s Discussion and Analysis in respect of the year ended December 31, 2020 and in the section entitled “Risk Factors” in the Company’s Annual Information Form dated March 18, 2021. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those described in forward-looking statements or information. The forward-looking information or statements are stated as of the date hereof. Nevada Copper disclaims any intent or obligation to update forward-looking statements or information except as required by law. Readers are referred to the additional information regarding Nevada Copper’s business contained in Nevada Copper’s reports filed with the securities regulatory authorities in Canada. Although the Company has attempted to identify important factors that could cause actual actions, events, or results to differ materially from those described in forward-looking statements, there may be other factors that could cause actions, events or results not to be as anticipated, estimated or intended. For more information on Nevada Copper and the risks and challenges of its business, investors should review Nevada Copper’s filings that are available at www.sedar.com.

Nevada Copper provides no assurance that forward-looking statements and information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements or information. Accordingly, readers should not place undue reliance on forward-looking statements or information.