Category: Blog

Blog sub category

Lion One Discovers New Near-Surface Lode at Tuvatu and Intersects Ore-Grade Mineralization Associated with Near-Mine CSAMT Anomaly

Post author By admin
Post date December 8, 2022

North Vancouver, British Columbia–(Newsfile Corp. – December 8, 2022) – Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) (“Lion One” or the “Company”) provides results from near-mine exploration, identifying two new zones of significant mineralization within the footprint of the deposit. A new lode, named URA1 has been discovered during construction of the development decline; its location corresponds to Tuvatu’s near-surface and earliest scheduled production area: Zone 2. The lode has been further defined through underground channel sampling and subsequent diamond drilling. The URA1 lode will be included in the updated Mineral Resource Estimate (MRE) that the Company aims to release in early 2023. Additionally, several hundred meters to the east of Tuvatu, drillhole TUDDH-612 has intersected mineralization corresponding to a distinct CSAMT gradient anomaly. This release presents significant new results from two separate areas within the general Tuvatu deposit footprint (Figure 1).

Highlights URA1

Discovery of near-surface, high-grade URA1 lode from intersection with the development decline, defined through channel sampling (up to 29 g/t Au over 1m in MD-CH-002) and diamond drilling of holes TUDDH-617, 619, and 621 (up to 167.42g/t Au over 0.3m in TUDDH-617, and 27.99 g/t Au over 1.2m in TUDDH-621).
Provides increase in volume of mineralized material within the portion of the deposit scheduled for earliest production.
A general N-S orientation of the lode corresponds to other major lodes (e.g., URW1) and may indicate the presence of an additional series of undiscovered lodes further to the West of Tuvatu.
Underscores the substantial near-mine exploration upside.

Highlights TUDDH-612

New ore-grade mineralization of 18.53 g/t Au over 0.6m from 492m corresponding to a sharp CSAMT geophysical gradient anomaly.
May represent the possible strike extension of the UR4 lode at Tuvatu, that may also include the deep high-grade intercept in TUDDH-494 at >1100m depth.
Tuvatu itself is coincident with a CSAMT gradient of similar magnitude; the recurring correspondence of mineralization with such gradients provides strong validation for the viability of this method for discovery of additional mineralized centers in the caldera. Once completed, this data will provide robust drill targets and substantial projected upside for new discovery.

URA1 lode, Zone 2
During advancement of the 2022 development decline, approximately 75m from the portal entrance, a sharp, clearly defined quartz-sulfide lode was intersected striking NNE-SSW and dipping 84°SE (Figure 2a). This newly identified structure is defined through underground mapping and has control points in space from chip-channel sampling, (results: Table 1) and a three-hole DDH program (TUDDH-617, 619 and 621; Figure 2b) to test the extent of this new lode (results: Table 2). The lode is named URA1, and represents a completely new, previously unmapped structure occurring within the northwestern, near-surface portion of the Tuvatu deposit (Zone 2). The new occurrence discovered near-surface, in a portion of the Tuvatu orebody that is within the current resource estimation extents, illustrates the extraordinary upside potential of the Tuvatu orebody in general. Table 2 lists the interpreted lode for each of the mineralized intercepts in boreholes TUDDH-617, 619, and 621. It is notable that the high-grade intercepts near the bottom of hole TUDDH-617 between 140.1 and 144.6m remain undefined, potentially representing yet another new lode. Moreover, this illustrates the discovery potential of additional mineralization, especially toward the West Zone where relatively sparse drilling has been completed. Notably, this area is defined by historic drilling carried out at a N-S orientation, which would have limited the exposure of the drilling to mineralized lodes trending in the same orientation.

As the discovery and definition of new features continues to add upside, intersection with known lodes, like the Murau 8 lode, intersected with TUDDH-621 at 105.3m returning 4.8m at 30.75 g/t gold continues to provide confidence in the grade continuity of known lodes.

TUDDH-612 and CSAMT profile 6
As part of the Company’s ongoing near-mine exploration program, drillhole TUDDH-612 was completed to test the sharply defined CSAMT¹ gradient anomaly on profile 6 (Figure 3). Drill hole TUDDH-612 intersected 18.53 g/t Au over 0.6m at 491.8m depth along the borehole.

As shown in Figure 1, this area is located several hundred meters from the current Tuvatu mineral resource outline. As such, the mineralization intersected at this location represents a new target zone of potential high-grade mineralization that warrants follow-up. Furthermore, the mineralized intercept in hole TUDDH-612 corresponds closely to the strike projection of the UR4 lode, along with the previously reported, deep intercept in TUDDH-494 of 12.2 g/t Au at a depth along the hole of 1106.3m (see April 8, 2022 news release). As such, these intercepts may indicate the extension of the UR4 lode toward the northeast and at depth, increasing LIO’s confidence that the mineralized structure has continuity over space for several hundred meters both to the east and at depth. This structure remains open along strike and up and down dip.

The mineralization observed (Figure 3) corresponds directly with a sharply defined CSAMT gradient anomaly, thus lending significant credence to the application of CSAMT for targeting new zones of potential mineralization. The infill CSAMT survey lines completed in 2022 to complement the previous 2019 survey, are currently in final phase of interpretation. The interpreted survey results will be the subject of a future release. It is expected that once finalized, the combined CSAMT geophysical data from previous and recent surveys will play a significant role in outlining new zones of mineralization near Tuvatu, as well as regionally throughout the Navilawa caldera. A third program of CSAMT geophysics will commence in 2023 and is expected to contribute to coverage of the Navilawa caldera within LIO’s most prospective areas of interest.

Table 1. Chip-channel results from sampling of the URA1 lode, development decline.

Channel ID	From m	To m	Width m	Composited Grade g/t Au	*Cumulative gm**
MD-CH-001	0.0	2.5	2.5	9.94	24.86
MD-CH-002	0.0	1.0	1.0	29.02	29.02
MD-CH-003	1.0	3.0	2.0	8.91	17.83
MD-CH-004	1.5	3.0	1.5	11.93	17.89
MD-CH-005	1.0	2.5	1.5	15.17	22.75
MD-CH-006	0.0	3.0	3.0	5.62	16.87
MD-CH-011	0.0	2.5	2.5	10.46	26.15

Figure 1. Plan view of the Tuvatu deposit lodes (gray) showing the locations of the exploration and development declines (red), the new URA1 lode (blue) to the west, and TUDDH-612 borehole to the east. The dotted arrow indicates the possible strike extension of the UR4 lode.

To view an enhanced version of Figure 1, please visit:
https://images.newsfilecorp.com/files/2178/147248_0a2ed6f15443ca97_002full.jpg

Figure 2a. Photo of URA1 lode located along the northeast wall of the new development decline. The vein at this location is approximately 20 cm wide.

To view an enhanced version of Figure 2a, please visit:
https://images.newsfilecorp.com/files/2178/147248_lionfigure2.jpg

Figure 2b. Oblique view (looking NE) of the URA1 lode (blue) showing the locations of the exploration and development declines (red), and the follow-up boreholes TUDDH-617, 619, and 621.

To view an enhanced version of Figure 2b, please visit:
https://images.newsfilecorp.com/files/2178/147248_0a2ed6f15443ca97_004full.jpg

Figure 3. Oblique view showing the locations of borehole TUDDH-612 relative to the CSAMT profile 6, and the exploration and development declines. The location of the high-grade intercept in TUDDH-612 at 18.53 g/t Au is indicated by the red dot. Green dots represent values between 0.5 and 3.0 g/t Au.

To view an enhanced version of Figure 3, please visit:
https://images.newsfilecorp.com/files/2178/147248_0a2ed6f15443ca97_005full.jpg

Table 2. Results from URA1 drilling. The interpreted lode for each intercept is indicated.

Hole ID	From (m)	To (m)	Interval (m)	Au g/t	Lode
TUDDH-617	51.9	53.1	1.2	0.99	Murau 4
	56.1	58.2	2.1	1.76	URA 1
including	57.9	58.2	0.3	6.30	URA 1
	59.7	63.3	3.6	2.93	URA 1
including	59.7	60.0	0.3	17.01	URA 1
	81.9	82.8	0.9	1.20	undefined
	140.1	141.0	0.9	56.22	undefined
including	140.7	141.0	0.3	167.42	undefined
	143.4	144.6	1.2	19.27	undefined

TUDDH-619	29.3	32.6	3.3	1.82	Murau 4
	41.3	42.5	1.2	0.52	undefined
	47.6	48.8	1.2	2.79	Murau 5
	50.6	51.2	0.6	5.03	Murau 5
including	50.9	51.2	0.3	8.26	Murau 5
	52.4	52.7	0.3	0.66	Murau 5
	65.0	65.3	0.3	3.48	URA 1
	72.2	73.7	1.5	2.78	Murau 7
including	73.4	73.7	0.3	9.66	Murau 7
	148.1	148.7	0.6	0.59	Murau 12

TUDDH-621	77.7	80.1	2.4	6.03	Murau 6
including	78.3	78.6	0.3	43.13	Murau 6
	81.3	83.4	2.1	2.68	Murau 7
including	82.8	83.4	0.6	5.26	Murau 7
	84.6	87.6	3.0	2.24	Murau 7
including	86.7	87.3	0.6	7.37	Murau 7
	105.3	110.1	4.8	30.75	Murau 8
including	105.3	105.9	0.6	54.31	Murau 8
and	105.9	106.5	0.6	8.10	Murau 8
and	106.5	107.4	0.9	56.17	Murau 8
and	107.4	108.3	0.9	46.55	Murau 8
and	108.3	108.6	0.3	11.39	Murau 8
and	108.6	108.9	0.3	13.49	Murau 8
and	108.9	110.1	1.2	8.56	Murau 8
	123.6	124.2	0.6	2.62	Murau 10
	156.0	157.2	1.2	0.81	Murau 11
	159.3	160.5	1.2	27.99	URA 1
	168.0	170.4	2.4	17.06	Murau 12
including	168.0	169.2	1.2	8.62	Murau 12
and	169.2	170.4	1.2	25.51	Murau 12

Table 3. Survey details of diamond drill holes referenced in this release.

Hole No	Coordinates (Fiji map grid)	RL	final depth	dip	azimuth
	N	E	m	m	Deg.	(TN)
TUDDH-612	3920929.1	1876512.6	236.3	905.8	-60	097
TUDDH-617	3920800.6	1876257.3	203.1	149.9	-60	266
TUDDH-619	3920801.2	1876257.7	203.2	161.1	-60	297
TUDDH-621	3920799.9	1876257.7	203.0	200.7	-69	225

About Tuvatu
The Tuvatu Alkaline Gold Project is located on the island of Viti Levu in Fiji. The January 2018 mineral resource for Tuvatu as disclosed in the technical report “Technical Report and Preliminary Economic Assessment for the Tuvatu Gold Project, Republic of Fiji”, dated September 25, 2020, and prepared by Mining Associates Pty Ltd of Brisbane Qld, comprises 1,007,000 tonnes indicated at 8.50 g/t Au (274,600 oz. Au) and 1,325,000 tonnes inferred at 9.0 g/t Au (384,000 oz. Au) at a cut-off grade of 3.0 g/t Au. The technical report is available on the Lion One website at www.liononemetals.com and on the SEDAR website at www.sedar.com.

Qualified Person
In accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43- 101”), Sergio Cattalani, P.Geo, Senior Vice President Exploration, is the Qualified Person for the Company and has reviewed and is responsible for the technical and scientific content of this news release.

QAQC Procedures
Lion One adheres to rigorous QAQC procedures above and beyond basic regulatory guidelines in conducting its sampling, drilling, testing, and analyses. The Company utilizes its own fleet of diamond drill rigs, using PQ, HQ and NQ sized drill core rods. Drill core is logged and split by Lion One personnel on site. Samples are delivered to and analyzed at the Company’s geochemical and metallurgical laboratory in Fiji. Duplicates of all samples with grades above 0.5 g/t Au are both re-assayed at Lion One’s lab and delivered to ALS Global Laboratories in Australia (ALS) for check assay determinations. All samples for all high-grade intercepts are sent to ALS for check assays. All samples are pulverized to 80% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10.00 g/t Au are then re-analyzed by gravimetric method. For samples that return greater than 0.50 g/t Au, repeat fire assay runs are carried out and repeated until a result is obtained that is within 10% of the original fire assay run. Lion One’s laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples are sent to ALS labs in Townsville QLD and are analyzed by the same methods (Au-AA26, and Au-GRA22 where applicable). ALS also analyses 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES (method ME-ICP61).

About Lion One Metals Limited
Lion One’s flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One’s CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.

On behalf of the Board of Directors of Lion One Metals Limited
“Walter Berukoff“, Chairman and CEO

Contact Investor Relations
Toll Free (North America) Tel: 1-855-805-1250
Email: info@liononemetals.com
Website: www.liononemetals.com

Neither the TSX Venture Exchange nor its Regulation Service Provider accepts responsibility for the adequacy or accuracy of this release

This press release may contain statements that may be deemed to be “forward-looking statements” within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward-looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as “plans”, “expects” or “does not expect”, “proposed”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Limited’s current beliefs and is based on information currently available to Lion One Metals Limited and on assumptions Lion One Metals Limited believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Limited or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Limited, general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Limited has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Limited does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

¹ CSAMT = Controlled Source Audio Magneto-Tellurics – a ground based geophysical technique that maps 3D electrical resistivity contrasts, inferred to be structural, lithological or hydrothermal-alteration related.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/147248

Tags #InvestingInBatteryMetals, #JuniorMining, #LIO, #LionOneMetals, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, #QuintonHennigh, #Tuvatu, #WalterBerukoff, best canadian gold stocks, maurice jackson, proven and probable, Quinton Hennigh

Energy Junior Mining Silver Bullet Mines

Silver Bullet Mines Provides Update on Idaho and Arizona Mines

Post author By admin
Post date December 8, 2022

Burlington, Ontario–(Newsfile Corp. – December 8, 2022) – Silver Bullet Mines Corp. (TSXV: SBMI) (OTCQB: SBMCF) (‘SBMI’ or ‘the Company’) is pleased to provide an update on operations at its Washington Mine in Idaho and at its Buckeye Mine in Arizona.

In Arizona at the Buckeye, core drilled by a prior optionee at the Buckeye Mine in 2017 has been located and a chain of custody established. The core is being re-logged. There is no record of any of it having been tested for platinum group elements. It is intended that some of such core will be split and sent to an accredited third-party lab for testing, and the remainder will be stored after it is logged.

Historical third party core from 2017

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8464/147242_4d324f7fe489cace_001full.jpg

Historical core being split in December, 2022

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8464/147242_4d324f7fe489cace_002full.jpg

In Idaho, the entrance to the historical past-producing gold and silver mine has been screened and rock bolted. In management’s opinion the entrance to the historical mine is secure. Efforts continue to ensure the access area past the entrance is safe to enable the field team and contract miner to advance towards what is believed to be the mineralized zone. A mining engineer has created a mine plan and a ventilation plan which will be implemented once the area is secure. The Company believes it has the necessary equipment to proceed, including a recently acquired mucker. If timber is required, SBMI has the timber rights at surface at the Washington Mine and can harvest the timber as needed.

The mining plan at the Washington Mine is subject to evolution as new facts are encountered on surface, underground and in the supply chain. The current plan is to mine around the caved area, develop a raise in the mineralized material up to surface, and to work through the winter as possible. This requires SBMI to acquire an explosive licence, for which it is applying.

Winter weather in Idaho is an uncontrollable risk, but mitigated at the Washington Mine due to the mine’s proximity to a highway.

Readers should be cautioned that the Company’s decision to move forward with the construction of and production at the Washington Mine and the Buckeye Mine is not based on the results of any pre-feasibility study or feasibility study of mineral resources demonstrating economic or technical viability. The Company has undertaken exploration and development activities; and after taking into consideration various factors, including but not limited to: historical data, the exploration and development results to date, technical information developed internally, the availability of financing, and the starting costs as estimated internally by the Company’s management, the Company is of the view that the establishment of mineral reserves by way of a prefeasibility or feasibility study at this stage is not necessary and would be unduly costly, and that the most responsible utilization of the Company’s resources is to proceed with the development of the mines. Readers are cautioned that due to the lack of prefeasibility study or feasibility study, there is increased uncertainty and higher risk of economic and technical failure associated with the Company’s decision. In particular, there is additional risk that mineral grades may be lower than expected, and the risk that construction or continuing mining operations may be more difficult or more expensive than management expected. Production and economic variables may vary considerably, due to the absence of a detailed economic and technical analysis in accordance with National Instrument 43-101. Failure at the Washington or Buckeye Mine may materially adversely impact the Company’s overall ability to continue as a going concern.

For further information, please contact:

John Carter
Silver Bullet Mines Corp., CEO
cartera@sympatico.ca
+1 (905) 302-3843

Peter M. Clausi
Silver Bullet Mines Corp., VP Capital Markets
pclausi@brantcapital.ca
+1 (416) 890-1232

Cautionary and Forward-Looking Statements

This news release contains certain statements that constitute forward-looking statements as they relate to SBMI and its subsidiaries. Forward-looking statements are not historical facts but represent management’s current expectation of future events, and can be identified by words such as “believe”, “expects”, “will”, “intends”, “plans”, “projects”, “anticipates”, “estimates”, “continues” and similar expressions. Although management believes that the expectations represented in such forward-looking statements are reasonable, there can be no assurance that they will prove to be correct.

By their nature, forward-looking statements include assumptions, and are subject to inherent risks and uncertainties that could cause actual future results, conditions, actions or events to differ materially from those in the forward-looking statements. If and when forward-looking statements are set out in this new release, SBMI will also set out the material risk factors or assumptions used to develop the forward-looking statements. Except as expressly required by applicable securities laws, SBMI assumes no obligation to update or revise any forward-looking statements. The future outcomes that relate to forward-looking statements may be influenced by many factors, including but not limited to: the impact of SARS CoV-2 or any other epidemic or pandemic; reliance on key personnel; the thoroughness of its QA/QA procedures; the continuity of the global supply chain for materials for SBMI to use in the production and processing of mineralized material; shareholder and regulatory approvals; licencing and permitting; activities and attitudes of communities local to the location of the SBMI’s properties; risks of future legal proceedings; income tax matters; fires, floods and other natural phenomena; the rate of inflation; availability and terms of financing; distribution of securities; commodities pricing; currency movements, especially as between the USD and CDN; effect of market interest rates on price of securities; and, potential dilution. SARS CoV-2 and other potential global viruses create risks that at this time are immeasurable and impossible to define.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/147242

Tags #BuckeyeMine, #SBMI, #WashingtonMine, John Carter, Silver Bullet Mines

Base Metals Collective Mining Energy Precious Metals

Collective Mining Drills 298.6 Metres at 1.54 g/t Gold Equivalent and 102.20 metres at 3.38 g/t Gold Equivalent into the Main Breccia Discovery at Apollo

Post author By admin
Post date December 7, 2022

Drill hole APC-20 was drilled on the north-eastern side of the Main Breccia discovery at the Apollo target into an open area without any prior drilling and intersected a broad zone of mineralization with an abundance of gold-rich, carbonate base metal veins overprinting angular, gold-silver-copper bearing breccia. This intercept represents the highest-grade intersection over 100 metres drilled to date at Apollo with results as follows:
Drill hole APC-19 was drilled in the centre of the system in order to expand the vertical dimension in this location. The hole intercepted a broad and continuous zone of copper-silver-gold mineralization and includes a copper-rich subzone with results including:
Based on a newly revised model of the Main Breccia system, the Company has identified two high-grade subzones of mineralization and as a result, will be drill tested in 2023 and are outlined as follows:
Three rigs continue to drill at Apollo with holes APC-22 through APC-27 completed and holes APC-28 through APC-30 underway. Additional assay results are anticipated in the near term.

TORONTO, Dec. 7, 2022 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from three additional holes drilled at the Apollo target (“Apollo”) within the Company’s Guayabales project located in Caldas, Colombia. The Main Breccia discovery at Apollo is a high-grade, bulk tonnage copper-gold-silver porphyry-related breccia system. As part of its fully funded 23,000 metre drill program for 2022, there are currently three diamond drill rigs operating at the Apollo target.

Executive Chairman, Ari Sussman stated: “Drilling into the Main Breccia system at the Apollo target continues to expand the total volume while delivering long and high-grade intercepts. The discovery of the two new high-grade subzones through detailed geological modelling is exciting as both the copper rich zone and the gold rich zone appear to be open for expansion in multiple directions. Additionally, we believe that the two subzones will coalesce within the system, thereby enhancing the potential for the discovery of even higher grades than we have discovered to date. These areas will be a key target for drilling in early 2023. Without question there is a lot more metal to be found at the Apollo target and we will remain aggressive in unlocking the potential of this remarkable discovery.”

To watch a short video of David Reading, Special Advisor to Collective Mining, speak about the assay results announced today, please click here

Details (See Table 1 and Figures 1–4)

Twenty-two diamond drill holes with accompanying assay results have now been announced at Apollo and a further nine holes are outstanding. Results of three drill holes are announced below:

Drill hole APC-20 was drilled south from pad 5 to a maximum depth of 445.4 metres and successfully expanded the eastern area of the Main Breccia system at depth. The hole intersected 102.2 metres of continuous gold-silver-copper mineralization beginning at 298.2 metres down hole and ending at 400.40 metres. The hole is characterized by mineralized angular porphyry related breccia with a matrix infill of pyrite, some chalcopyrite and carbonate which is overprinted by zones of sheeted carbonate base metal veins (“CBM”) and veinlets which are associated with disseminated sphalerite and carry higher gold grades. These higher grade CBM zones can now be traced and mapped in multiple drill holes and three have been identified with drilling to date; within the lower, upper and central portions of the main breccia body The following results are highlighted:

102.20 metres @ 3.38 g/t AuEq consisting of 2.72 g/t Au, 28 g/t Ag, 0.08% Cu and includes a higher-grade zone of 33.60 metres @ 7.30 g/t AuEq.

Drill hole APC-19 was drilled in a southeast direction from pad 4 to a maximum depth of 582.3 metres. The hole intersected continuous copper-silver-gold mineralization from 199.20 metres (178m vertical) to 497.80 metres (470 metres vertical). The mineralized breccia contains a matrix of abundant chalcopyrite and some pyrite particularly from the beginning of the hole down to 323.50 metres which is associated with higher silver values and averaged 0.63% copper and 64 g/t silver over this interval. This newly identified shallow plunging high-grade copper zone has been intersected in six of the holes drilled to date and future drilling will target extensions of this zone within the main breccia body. Assay results for APC-19 are as follows:

298.60 metres @ 1.54 g/t AuEq consisting of 0.48 g/t Au, 34 g/t Ag and 0.31% Cu and includes 124.30 metres 2.72 g/t AuEq consisting of 0.62 g/t Au, 64 g/t Ag and 0.63% Cu.

Hole APC-21 was drilled at a steep angle towards the north from pad 3 but unfortunately undercut the northerly dipping main breccia body.

With the recently announced assay results for APC-17 and previously announced visuals from APC-22, the potential total volume of rock hosting the Main Breccia discovery within it has approximately tripled in size with the dimensions now measuring 385 metres along strike by 350 metres width by 825 metres. The discovery remains wide open for expansion and further step-out holes are currently being designed.

Three rigs continue to drill at Apollo with additional assay results from holes APC-22 through APC-30 anticipated in the near term.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers an 800 metres X 700 metres area. The Apollo target area hosts the Company’s new Main Breccia discovery plus a vein system located above and on the eastern flank of the Main Breccia discovery and the Northern Breccia discovery located 250 metres to the north of the Main Breccia. Multiple additional untested breccia, porphyry and vein targets have been generated and will be drilled in due course. The overall Apollo target area also remains open for further expansion.

Table 1: Apollo Target Assays Results

Hole #	From (m)	To (m)	Intercept (m)	Au (g/t)	Ag (g/t)	Cu %	Mo %	Zn %	Pb %	AuEq (g/t) *	CuEq (%) *
APC-19	199.20	497.80	298.60	0.48	34	0.31	0.002	–	–	1.54	0.79
Incl.	199.20	323.50	124.30	0.62	64	0.63	0.002	–	–	2.72	1.39
APC-20**	298.20	400.40	102.20	2.72	28	0.08	0.001	0.21	0.15	3.38	–
Incl.	324.25	357.85	33.60	6.30	45	0.08	0.001	0.42	0.33	7.30	–
APC-21				No Significant Values

*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.016 x 0.95) + (Cu (%) x 1.96 x 0.95)+ (Mo (%)*7.35 x 0.95) and CuEq (%) is calculated as follows: (Cu (%) x 0.95) + (Au (g/t) x 0.51 x 0.95) + (Ag (g/t) x 0.01 x 0.95)+ (Mo(%)x 3.75 x 0.95) utilizing metal prices of Cu – US$4.00/lb, Ag – $22/oz Mo US$15.00/lb and Au – US$1,400/oz and recovery rates of 95% for Au, Ag, Mo and Cu. Recovery rate assumptions are speculative as no metallurgical work has been completed to date.

** In APC-20, Zn and Pb were including for the AuEq calculation using metal prices of Zn – US$1.75/lb, Pb – $0.95/lb and recovery rates of 95%.

*** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.

Figure 1: Plan View of the Main Breccia discovery at Apollo Highlighting New Drill Holes APC19 & APC-20 and the Dimensions of the Discovery (CNW Group/Collective Mining Ltd.)

Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)

Figure 3: Apollo Target: Main Breccia Cross Section with Core Photo Highlights from APC-19 (CNW Group/Collective Mining Ltd.)

Figure 4: Apollo Target: Core Photo Highlights from APC-20 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver and gold exploration company based in Canada, with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper, silver and gold Main Breccia discovery. The Company’s near-term objective is to continue with expansion drilling of the Main Breccia discovery while increasing confidence in the highest-grade portions of the system.

Management, insiders and close family and friends own nearly 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/December2022/07/c3277.html

Tags #AriSussman, #CNL, #CollectiveMining, #Guayabales, #InvestingInBatteryMetals, #InvestingInCopper, #JuniorMining, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, Apollo Target, maurice jackson, proven and probable

Energy Junior Mining Precious Metals Silver Bullet Mines

Silver Bullet Mines Closes Final Tranche of Financing

Post author By admin
Post date December 6, 2022

Burlington, Ontario–(Newsfile Corp. – December 6, 2022) – On October 21, 2022 Silver Bullet Mines Corp. (TSXV: SBMI) (OTCQB: SBMCF) (‘SBMI’ or ‘the Company’) announced a financing of Units (the “Financing”), whereby each Unit consisted of one common share and one common share purchase warrant. Each Unit is priced at $0.20 (twenty cents). Each common share purchase warrant has a 2-year term and is exercisable at $0.30 (thirty cents).

SBMI announces it has closed on the final tranche of the Financing, being $360,912. This represents 1,804,560 common shares and 1,804,560 common share purchase warrants. This together with the first tranche totals $807,912, an oversubscription from the announced target of $600,000. No insiders participated and there here are no finder fees payable on this tranche.

For further information, please contact:

John Carter
Silver Bullet Mines Corp., CEO
cartera@sympatico.ca
+1 (905) 302-3843

Peter M. Clausi
Silver Bullet Mines Corp., VP Capital Markets
pclausi@brantcapital.ca
+1 (416) 890-1232

Cautionary and Forward-Looking Statements

By their nature, forward-looking statements include assumptions, and are subject to inherent risks and uncertainties that could cause actual future results, conditions, actions or events to differ materially from those in the forward-looking statements. If and when forward-looking statements are set out in this new release, SBMI will also set out the material risk factors or assumptions used to develop the forward-looking statements. Except as expressly required by applicable securities laws, SBMI assumes no obligation to update or revise any forward-looking statements. The future outcomes that relate to forward-looking statements may be influenced by many factors, including but not limited to: the impact of SARS CoV-2 or any other global virus; reliance on key personnel; the thoroughness of its QA/QA procedures; the continuity of the global supply chain for materials for SBMI to use in the production and processing of ore; shareholder and regulatory approvals; activities and attitudes of communities local to the location of the SBMI’s properties; risks of future legal proceedings; income tax matters; fires, floods and other natural phenomena; the rate of inflation; availability and terms of financing; distribution of securities; commodities pricing; currency movements, especially as between the USD and CDN; effect of market interest rates on price of securities; and, potential dilution. SARS CoV-2 and other potential global viruses create risks that at this time are immeasurable and impossible to define.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/146944

Tags #BuckeyeMine, #MauriceJackson, #ProvenAndProbable, #SBMI, John Carter, Silver Bullet Mines

Base Metals Junior Mining Precious Metals Rover Metals

Rover Metals Provides Corporate Update, Including Analyst Report

Post author By admin
Post date December 5, 2022

VANCOUVER, British Columbia, Dec. 05, 2022 (GLOBE NEWSWIRE) — Rover Metals Corp. (TSXV: ROVR) (OTCQB: ROVMF) (FSE:4XO) (“Rover” or the “Company”) is pleased to provide a corporate update to shareholders and to share its most recent analyst report from Fundamental Research.

Corporate Update
Click here for a pre-recorded corporate update between Judson Culter, CEO at Rover, and U.S. stock-commodity TV journalist personality, Maurice Jackson, of Proven and Probable.

Analyst Report
Fundamental Research Corp. (“FRC”) has published their updated analyst report on Rover, including a positive rating, dated December 1, 2022. The report can be accessed here.

FRC is one of the largest issuer-paid independent stock market research firms in the world, with a 19-year track record of covering 650+ companies. As of November 28, 2022, FRC’s top picks were up 41% on average since the initiation of coverage*. FRC provides fee-based coverage. Their analysts are sought after by the media and at conferences to give their opinions on the market, current topics of interest such as the direction of commodity prices, and top stock picks.

*Past performance is not indicative of future performance.

Judson Culter, CEO at Rover Metals, states “we are developing a lithium mining project in Nevada that has the potential to help fill-in the major supply shortage coming for lithium beginning in H2-2026*. Development of critical mineral projects here in North America is a matter of national security. Mining stocks and the mining sector need to get a second look from domestic investors right now given the global geopolitical climate we’re living in. We welcome due diligence calls on our mining resource development projects. Companies like Rover are subject to naked-short selling and potential malicious trading practises that can be orchestrated by hostile foreign regimes. Rover relies on the support of domestic investors to help sustain uninterrupted development of its resource projects. China’s battery companies are targeting Europe and are forecasted to account for approximately 30% of Europe’s battery production by 2030*.”

*Source: Benchmark Mineral Intelligence, U.K.

New Office Phone Number
Our main office number has recently changed to +1-778-754-2855.

U.S. Trading Ticker
The Company now trades under the ticker ROVMF on the OTCQB.

About Rover Metals
Rover is a publicly traded junior mining company that trades on the TSXV under symbol ROVR, on the OTCQB under symbol ROVMF, and on the FSE under symbol 4XO. Rover is currently focussed on the development of a claystone lithium project in southwest Nevada, USA. Plans for 2023 include a 1,200-meter reverse circulation drill program at the Let’s Go Lithium project.

The Company has a diverse portfolio of mining resource development projects with varying exploration timelines. Its critical mineral projects include lithium, zinc, and copper. Its precious metals projects include gold and silver. The Company is exclusive to the mining jurisdictions of Canada and the U.S.

You can follow Rover on its social media channels:
Twitter: https://twitter.com/rovermetals
LinkedIn: https://www.linkedin.com/company/rover-metals/
Facebook: https://www.facebook.com/RoverMetals/
for daily company updates and industry news, and
YouTube: https://www.youtube.com/channel/UCJsHsfag1GFyp4aLW5Ye-YQ?view_as=subscriber
for corporate videos.
Subscribe to our Newsletter on our Website: https://www.rovermetals.com/

ON BEHALF OF THE BOARD OF DIRECTORS
“Judson Culter”
Chief Executive Officer and Director

For further information, please contact:
Email: info@rovermetals.com
Phone: +1 (778) 754-2855

Statement Regarding Forward-Looking Information
This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause Rover’s actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur. There can be no assurance that such statements prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements, and readers are cautioned not to place undue reliance on these forward-looking statements. Any factor could cause actual results to differ materially from Rover’s expectations. Rover undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.

THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE REPRESENTS THE EXPECTATIONS OF THE COMPANY AS OF THE DATE OF THIS NEWS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE COMPANY MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE LAWS.

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OF THIS RELEASE.

Tags #InvestingInCopper, #JudsonCulter, #JuniorMining, #MauriceJackson, #PreciousMetals, #ProvenAndProbable, #RoverMetals, Letsgolithiumproject, maurice jackson, proven and probable, ROVR

Base Metals Collective Mining Junior Mining Uncategorized

Ari Sussman from Collective Mining to Present at OTC Markets Group Metals & Mining Virtual Investor Conference on December 8th, 2022

Post author By admin
Post date December 2, 2022

TORONTO, Dec. 1, 2022 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) will be presenting at the OTC Markets Group, Metals & Mining Virtual Investor Conference on Thursday, December 8, 2022, at 2:00pm ET.

Using the link below, investors can register and listen to the presentation, and take part in a question and answer session at the end. The presentation is expected to last 30 minutes.

DATE: Thursday, December 8, 2022
TIME: 2:00pm ET – 2:30pm ET
LINK: https://bit.ly/3E1tR5k

Please log in 5 minutes early in order to register. An archived webcast will also be made available after the event.

Ari Sussman, Executive Chairman of Collective Mining will be providing an overview and will discuss the Company’s “Main Breccia” discovery at the Apollo target. The Main Breccia discovery is a high-grade and bulk tonnage copper-silver-gold porphyry-related breccia system characterized by two main yet distinct pulses of mineralized fluids flooding the breccia with metals.

The Company’s Guayabales project is located in the mining-friendly department of Caldas, Colombia, in the heart of a long-established mining camp with ten fully permitted and operating mines located within three kilometres of the project. As a result, the Guayabales project is blessed with excellent infrastructure with roads and hydroelectric powerlines traversing the project and an abundant labour force located nearby in the townships of Supia and Marmato.

Three rigs continue to drill at Apollo with holes APC-19 through APC-26 completed and holes APC-27 through APC-29 underway. Additional assay results are anticipated in the near term.

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com.

Management, insiders and close family and friends own approximately 35% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

View original content: http://www.newswire.ca/en/releases/archive/December2022/01/c2937.html

Base Metals Collective Mining Energy Exclusive Interviews Precious Metals

Collective Mining – Expands the Main Breccia at Apollo

Post author By admin
Post date November 29, 2022

Joining us for a conversation is Ari Sussman of Collective Mining, Colombia’s Most Exciting Exploration Company. Collective Mining has just announced another significant development coming from the flagship Guayabales Project. Today’s discussion will focus on the Main Breccia at the Apollo Target which is delivering High Grade along with some remarkable continuity with a new Strike of 385 Meters, Width at 350 Meters, and Vertical 825 Meters!

In this video, we’ll be highlighting Collective Mining and their recent Breccia expansion at the Apollo Target. Collective Mining is becoming a front runner in the junior mining space with their flagship Guayables Project,

COLLECTIVE MINING:
Listing:(TSX.V: CNL | OTCQX: CNLMF)
Website: https://www.collectivemining.com/
Press Release: https://provenandprobable.com/step-out-drilling-materially-expands-the-overall-dimensions-of-collective-minings-main-breccia-discovery-at-apollo/
Corporate Presentation: https://www.collectivemining.com/investors/presentations/
Facebook: https://www.facebook.com/CollectiveMiningCol
Twitter: https://twitter.com/CollectiveMini1
LinkedIn: https://www.linkedin.com/company/collectivemining/?originalSubdomain=co
Instagram: https://www.instagram.com/collectivemining/
Youtube: https://www.youtube.com/channel/UC0J8zpCq0TNhJQePKdCrJag

Collective Mining: Rapidly advancing, large scale gold-copper-silver-moly porphyry and breccia targets with related high-grade vein systems in the mining-friendly department of Caldas in Colombia

Collective Mining’s two projects the Guayabales (Flagship) and the San Antonio (Secondary) are situated in Marmato, an underexplored yet multi-million ounce, high-grade gold and silver district located in the Middle Cauca belt in Colombia. With six out of eleven targets drilled, the Company has made three promising grassroot discoveries to date and is awaiting assay results on a potential fourth discovery. Drilling activity continues at a brisk pace with a 20,000+ metre drill program in 2022.

The Best Video on WHY and WHEN to Buy and Sell Physical Precious Metals:

Proven and Probable
Where we deliver Mining Insights & Bullion Sales. I’m a licensed broker for Miles Franklin Precious Metals Investments, The Only Online Dealer that is Licensed and Bonded (Period)! Where we provide unlimited options to expand your precious metals portfolio, from

Website| www.provenandprobable.com
Call me directly at 855.505.1900 or email: Maurice@MilesFranklin.com
Precious Metals FAQ – https://www.milesfranklin.com/faq-maurice/

Base Metals Energy Junior Mining Metallic Minerals Precious Metals Stillwater Critical Minerals

Stillwater Critical Minerals Files Early Warning Report Regarding its Holdings of Heritage Mining

Post author By admin
Post date November 29, 2022

VANCOUVER, BC / ACCESSWIRE / November 29, 2022 / Stillwater Critical Minerals (formerly Group Ten Metals) (TSX.V:PGE)(OTCQB:PGEZF)(FSE:5D32) (the “Company” or “SWCM”) announces it has filed an Early Warning Report related to its holdings of 3,900,000 common shares of Heritage Mining Ltd. (“Heritage”) (CSE: HML) which represents approximately 11.8% of the total issued and outstand shares of Heritage. These shares were issued to Stillwater Critical Minerals as well as a cash payment of $150,000 and completion of $500,000 project work to satisfy first anniversary commitments per the Definitive Earn-In Agreement announced November 29, 2021 with respect to the Drayton-Black Lake gold project in Ontario, Canada.

The Heritage shares are held directly by Stillwater Critical Minerals for investment purposes. Additional share payments to Stillwater Critical Minerals are required under the Agreement and SWCM may in the future take such actions in respect of its shares as it deems appropriate in light of the market circumstances then existing including the sale of all or a portion of such holdings in the open market or in privately negotiated transactions to one or more purchasers.

There are no persons acting jointly or in concert with Stillwater Critical Minerals with respect to the shareholdings in Heritage, nor has the Company entered into any agreements in respect of its shareholdings in Heritage with any person with which SWCM acts jointly or in concert.

This news release is being issued in accordance with National Instrument 62-103 – The Early Warning System and Related Take-Over Bid and Insider Reporting Issues in connection with the filing of an early warning report. The early warning report respecting the acquisition will be filed on the System for Electronic Document Analysis and Retrieval (“SEDAR”) at www.sedar.com.

About Stillwater Critical Minerals Corp.

Stillwater Critical Minerals (TSX.V: PGE | OTCQB: PGEZF) is a mineral exploration company focused on its flagship Stillwater West PGE-Ni-Cu-Co + Au project in the iconic and famously productive Stillwater mining district in Montana, USA. With the recent addition of two renowned Bushveld and Platreef geologists to the team, the Company is well positioned to advance the next phase of large-scale critical mineral supply from this world-class American district, building on past production of nickel, copper, and chromium, and the on-going production of platinum group and other metals by neighbouring Sibanye-Stillwater. The Platreef-style nickel and copper sulphide deposits at Stillwater West contain a compelling suite of critical minerals and are open for expansion along trend and at depth, with an updated NI 43-101 mineral resource update currently in progress.

Stillwater Critical Minerals also holds the high-grade Black Lake-Drayton Gold project adjacent to Treasury Metals’ development-stage Goliath Gold Complex in northwest Ontario, which is currently under an earn-in agreement with an option to joint venture whereby Heritage Mining may earn up to a 90% interest in the project by completing payments and work on the project. The Company also holds the Kluane PGE-Ni-Cu-Co project on trend with Nickel Creek Platinum‘s Wellgreen deposit in Canada‘s Yukon Territory.

FOR FURTHER INFORMATION, PLEASE CONTACT:

Michael Rowley, President, CEO & Director
Email: info@criticalminerals.com Phone: (604) 357 4790
Web: http://criticalminerals.com Toll Free: (888) 432 0075

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE: Stillwater Critical Minerals

View source version on accesswire.com:
https://www.accesswire.com/729213/Stillwater-Critical-Minerals-Files-Early-Warning-Report-Regarding-its-Holdings-of-Heritage-Mining

Base Metals Collective Mining Junior Mining Precious Metals

Collective Mining Significantly Expands the Main Breccia Discovery at Apollo and Drills Near Surface High-Grade Mineralization Including 168.6 Metres at 2.91 g/t Gold Equivalent

Post author By admin
Post date November 29, 2022

Drill hole APC-17, a significant step-out hole to the north, intersected two zones of mineralization within the Main Breccia discovery at the Apollo target. The shallow zone, which was intersected directly below where the Main Breccia daylights at surface cut the following interval:
The second zone encountered in hole APC-17 cut the longest intercept of continuous mineralization within the Main Breccia discovery drilled to date with results as follows:
Drill hole APC-17, which was terminated at 912.8 metres due to rig capacity, bottomed in strong mineralization with the final 2.75 metres averaged 1.56 g/t gold, 9 g/t silver and 0.03% copper.
Drill hole APC-18 intersected near surface and high-grade copper-silver-gold mineralization approximately 300 metres to the north of the near surface intercept in APC-17. The mineralized breccia in this zone is strongly overprinted by numerous zones of carbonate, base metal veins with assay results as follows:
With the result of step out hole APC-17 and recently announced visuals from step out hole APC-22, the Main Breccia discovery now measures up to 385 metres along strike by 350 metres in width (previously 190 metres) and has been extended down to a vertical depth of 825 metres below surface (previously 500 metres). The discovery remains wide open for expansion and further step-out holes are currently being designed.
Three rigs continue to drill at Apollo with holes APC-19 through APC-26 completed and holes APC-27 through APC-29 underway. Additional assay results are anticipated in the near term.

TORONTO, Nov. 29, 2022 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from four additional holes drilled at the Apollo target (“Apollo”) within the Company’s Guayabales project located in Caldas, Colombia. The Main Breccia discovery at Apollo is a high-grade, bulk tonnage copper-gold-silver porphyry-related breccia target. As part of its fully funded 23,000 metre drill program for 2022, there are currently three diamond drill rigs operating at the Apollo target.

“The intersection of high-grade and shallow mineralization at Apollo demonstrates the excellent metal endowment of the Main Breccia and most importantly, the dimensions of the system continue to expand and clearly point to the fact that we are dealing with a large-scale discovery. It is truly remarkable to drill a 912-metre-long hole that bottoms in mineralization. Finally, the shallow, higher grade intercepts encountered in APC-17 and APC-18 are more than 300 metres apart and confirms that the southern portion of the deposit is where the system comes to surface. As a result, we are about to start construction of a new drill pad located between the two shallow intercepts in order to start defining the shallow portion of the Main Breccia mineralized system,” commented Ari Sussman, Executive Chairman.

Details (See Table 1 and Figures 1–3)

Nineteen diamond drill holes with accompanying assay results have now been announced at Apollo and a further eleven holes are outstanding. The Company recently completed four drill holes; one northerly directed, step out hole (APC-17), to test for mineralized extensions to the Main Breccia discovery, a second shallow hole drilled southwesterly to define extensions of newly discovered mineralized breccia outcrops located in the southern portion of the deposit and two fringe holes drilled at shallow angles to the west of the Main Breccia discovery.

Drill hole APC-17 was drilled approximately due north to a maximum depth of 912.60 metres. The hole intersected three mineralized zones: 72.3 metres of mineralization beginning at 118.20 metres down hole (100m vertical), 11.65 metres of mineralized breccia from 252.6 metres (220m vertical) and another 547.65 metres of mineralization from 365.15 metres down hole (330m vertical) to the end of the hole at 912.80m (825m vertical). The hole terminated while still in mineralized breccia due to limitations of the drill rig. Total cumulative mineralization in this diamond drill hole was 628.3 metres and is the most mineralization drilled in a single hole to date into the Main Breccia discovery at Apollo. The shallow intercept is hosted within angular porphyry related breccia containing chalcopyrite (1-2%) with pyrite and pyrrhotite and is located directly beneath recently discovered mineralization outcropping at surface. The deeper and longer intercept is also hosted within angular porphyry related breccia with the matrix filled with pyrite, some chalcopyrite and overprinting carbonate base metal veins (“CBM”). The following results are highlighted:

72.3 metres @ 2.57 g/t gold equivalent consisting of 1.00 g/t gold, 28 g/t silver and 0.63% copper (100 metres vertical).
11.65 metres @ 1.88 g/t gold equivalent consisting of 1.80 g/t gold, 4 g/t silver and 0.05% copper (220m vertical).
547.65 metres @ 1.03 g/t gold equivalent consisting of 0.76 g/t gold, 14 g/t silver and 0.04% copper (330m vertical).

Drill hole APC-18 was drilled in a southwest direction and intersected shallow, copper-silver-gold mineralization from 136.05 metres to 304.65 metres with the hole terminating at a final depth of 499.05 metres. The mineralized breccia contains a matrix of chalcopyrite and pyrite is strongly overprinted by numerous zones of CBM veins hosting sphalerite and galena. The hole was drilled below outcrops of breccia mineralization in the south-central portion of the deposit with assay results as follows:

168.6 metres @ 2.91 g/t gold equivalent consisting of 0.98 g/t gold, 69 g/t silver and 0.5% copper (85 metres vertical).

With the result of APC-17 and recently announced visuals from APC-22, the potential total volume of rock hosting the Main Breccia discovery within it has approximately tripled in size with the dimensions now measuring 385 metres along strike by 350 metres width by 825 metres depth versus prior dimensions of 385 metres x 190 metres x 500 metres. The discovery remains wide open for expansion and further step-out holes are currently being designed.

Holes APC-15 and APC-16 were drilled at shallow angles on the western periphery of the main breccia body. APC-15 was drilled to the northwest and intersected mineralized crackle breccia returning 56.05 metres @ 0.57 g/t gold equivalent from 68.6 metres (55 metres vertical). This is a new mineralized area outside of the Main Breccia discovery at Apollo. APC-16 was also drilled outside the Main Breccia discovery to the southwest and intersected 500 parts per million copper in crackle breccia from 200 metres and until the end of the hole at 303.35 metres. The Company believes that both APC-15 and APC-16 may have drilled over the top of the Main Breccia discovery in these locations.

Three rigs continue to drill at Apollo with additional assay results anticipated in the near term.

Table 1: Apollo Target Assays Results

HoleID	From (m)	To (m)	Intercept (m)	Au (g/t)	Ag (g/t)	Cu %	Mo %	AuEq (g/t)*	CuEq (%)*
APC-18	136.05	304.65	168.60	0.98	69	0.50	0.002	2.91	1.48
Incl	149.20	157.00	7.80	5.08	35	0.52	0.002	6.34	3.23
	193.20	205.10	11.90	2.18	154	0.77	0.001	5.81	2.97
	233.90	251.50	17.60	1.49	56	0.74	0.002	3.63	1.85
	291.65	297.00	5.35	3.26	10	0.11	0.001	3.47	1.77
APC-17	118.20	190.50	72.30	1.00	28	0.63	0.004	2.57	1.31
Incl	121.90	130.40	8.50	2.42	30	0.61	0.005	3.91	2.00
APC-17	252.60	264.25	11.65	1.80	4	0.05	0.002	1.88	–
and	365.15	912.80	547.65	0.76	14	0.04	0.001	1.03	–
Incl	527.80	561.10	33.30	3.01	19	0.05	0.002	3.23	–
	579.20	596.80	17.60	2.37	25	0.06	0.001	2.74	–
	816.00	837.50	21.50	1.53	28	0.09	0.001	2.04	–
APC-16				NSV*
APC-15	54.20	110.25	56.05	0.37	5	–	–	0.57	–
Incl	68.60	69.10	0.50	6.26	15	–	–	6.27	–
	77.85	79.20	1.35	4.17	20	–	–	4.41	–
and	180.95	181.65	0.70	13.29	9	–	–	12.81	–
	206.95	207.50	0.55	7.87	5	–	–	7.61	–

** A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.

*** NSV: No significant values

Figure 1: Plan View of the Guayabales Project Highlighting the Apollo Target (CNW Group/Collective Mining Ltd.)

Figure 2: Plan View of the Main Breccia discovery at Apollo Highlighting New Drill Holes APC17 & APC-18 and the Expanded Dimensions of the Discovery (CNW Group/Collective Mining Ltd.)

Figure 3: Apollo Target: Main Breccia Cross Section with Core Photo Highlights from APC-17 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com.

Qualified Person (QP) and NI43-101 Disclosure

Technical Information

FORWARD-LOOKING STATEMENTS

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

SOURCE Collective Mining Ltd.

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/November2022/29/c8565.html

Tags #AriSussman, #CNL, #CollectiveMining, #Guayabales, #InvestingInBatteryMetals, #InvestingInCopper, #JuniorMining, #MauriceJackson, #MilesFranklin, #PreciousMetals, #ProvenAndProbable, maurice jackson, proven and probable

Gold Shore Resources Junior Mining Precious Metals

Goldshore Intersects Additional High-Grade Shears in the QES Zone at the Moss Lake Gold Project

Post author By admin
Post date November 28, 2022

Vancouver, British Columbia–(Newsfile Corp. – November 28, 2022) – Goldshore Resources Inc. (TSXV: GSHR) (OTCQB: GSHRF) (FSE: 8X00) (“Goldshore” or the “Company“), is pleased to announce assay results from its ongoing 100,000-meter drill program at the Moss Lake Project in Northwest Ontario, Canada (the “Moss Lake Gold Project“).

Highlights:

Results for seven holes, drilled to expand the coverage of the high-grade shears in the QES Zone, have confirmed higher-grade shear-hosted gold mineralization within a large volume of well mineralized diorites. These results are all within the $1500 Whittle pit that constrains the current resource and identifies new high-grade shears. Best intercepts include:
- 1.51 g/t Au over 6.0m from 502.0m depth in MQD-22-075 and
- 1.47 g/t Au over 30.1m from 530.0m
- 8.45 g/t Au over 5.0m from 576m depth in MQD-22-076 including
  - 36.9 g/t Au over 1.0m from 577m
- 1.87 g/t Au over 6.75m from 602.25m
- 1.31 g/t Au over 14.15m from 544.0m depth in MQD-22-080
- 2.07 g/t Au over 6.0m from 422.0m depth in MQD-22-085 and
- 1.07 g/t Au over 15.0m from 457.0m
- 1.26 g/t Au over 7.15m from 573.85m
- 1.07 g/t Au over 24.7m from 369.0m depth in MQD-22-087 and
- 2.15 g/t Au over 5.0m from 489.0m
- 1.75 g/t Au over 8.05m from 513.95m
- 2.11 g/t Au over 30.75m from 536.9m including
  - 11.5 g/t Au over 3.1m from 555.2m
- 1.31 g/t Au over 63.6m from 427.0m depth in MQD-22-090A
  - 2.07 g/t Au over 32.0m from 439.0m
A new parallel mineralized shear structure has been discovered 150m south of the main QES system containing high grade mineralization within a sheared intermediate volcanic package with best intercepts of:
- 3.44 g/t Au over 5.8m from 246.4m depth in MQD-22-080
- 1.22 g/t Au over 4.0m from 206.0m depth in MQD-22-087
- 1.15 g/t Au over 7.3m from 75.0m depth in MQD-22-090A

President and CEO Brett Richards stated: “The results from these drill holes in the QES Zone are part of a 52-hole data set that was not included in the recent mineral resource estimate. They confirm our belief that there are additional high-grade shear zones within the deposit that will potentially add to the shear domain component of the mineral resource that we anticipate will be prioritized in the mining schedule when we move towards conducting a preliminary economic analysis next year.”

Technical Overview

Figure 1 shows the better intercepts in plain view and Figure 2 is a typical section through hole MQD-22-087. Table 1 shows the significant intercepts. Table 2 shows the drill hole locations.

Figure 1: Drill plan showing best of several +1 g/t Au intercepts relative to shear and intrusion domains

To view an enhanced version of Figure 1, please visit:
https://images.newsfilecorp.com/files/8051/145867_cbaba705c4a3bbcb_002full.jpg

Figure 2: Drill section through MQD-22-0087 relative to shear and intrusion domains

To view an enhanced version of Figure 2, please visit:
https://images.newsfilecorp.com/files/8051/145867_cbaba705c4a3bbcb_003full.jpg

Results have been received for six holes that have infilled areas of the QES Zone that are between sections drilled by historic holes with collar survey problems. As a result, they will replace the low-confidence historic holes in the upcoming resource model update.

A seventh hole was drilled to the southeast of the QES Zone to investigate two historical showing along a parallel structure of the QES Zone but did not intersect significant mineralization.

As with the historic holes, these holes intersected several broad zones of low-grade mineralization within the altered diorite intrusion host. Examples include 0.77 g/t Au over 83m from 493m depth in MQD-22-075; 0.41 g/t Au over 32.45m from 437.55m and 0.71 g/t Au over 131.1m from 493m in MQD-22-076; 0.54 g/t Au over 102m from 476m and 0.39 g/t Au over 27.95m from 643m in MQD-22-080; 0.78 g/t Au over 70m from 419m and 0.50 g/t Au over 28.75m from 521.25m in MQD-22-085; 0.50 g/t Au over 115.9m from 408.1m in MQD-22-087; and 0.48 g/t Au over 27.45m from 552.05m in MQD-22-090A.

All these low-grade zones occur as envelopes to higher-grade structures that form a three-dimensional, anastomosing shear network that has developed in response to strain on the altered diorite intrusion. Results include the broad zones of +1 g/t Au mineralization shown in the highlights (e.g., 1.31 g/t Au over 63.6m from 427m depth in MQD-22-090A) and several narrow high-grade intervals, including 10.1 g/t Au over 0.7m from 545.8m and 36.9 g/t Au over 1m from 577m in MQD-22-076; 10.0 g/t Au over 1m from 427m in MQD-22-085; 20.6 g/t Au over 0.9m from 370.65m, 28.3 g/t Au over 0.3m from 540.3m and 11.5 g/t Au over 3.1m from 555.2m in MQD-22-087; and 19.4 g/t Au over 1.15m from 455.85m in MQD-22-090A.

An additional parallel shear was discovered within the intermediate volcanic package approximately 150m south of the main QES system which contains broad intercepts of low-grade mineralization including 0.91 g/t over 24.8m from 246.4m in MQD-22-080; 0.33 g/t over 45.7m from 150.0m in MQD-22-085; 0.42 g/t over 39.0m from 189.0m in MQD-22-087 containing internal higher grade intercepts including 3.44 g/t Au over 5.8m from 246.4m depth in MQD-22-080; 1.22 g/t Au over 4.0m from 206.0m depth in MQD-22-087; 1.15 g/t Au over 7.3m from 75.0m depth in MQD-22-090A.

Importantly, these intercepts have identified additional high-grade shears not modelled in the recent Mineral Resource.

Pete Flindell, VP Exploration for Goldshore, said, “These drill results confirm high-grade shears that we have modelled at the QES Zone and confirmed additional shears that we expect to include in the next mineral resource update early next year.”

Table 1: Significant downhole gold intercepts

HOLE ID	FROM	TO	LENGTH (m)	TRUE WIDTH (m)	CUT GRADE (g/t Au)	UNCUT GRADE (g/t Au)
MQD-22-075	243.00	264.00	21.00	15.4	0.47	0.47
including	254.00	256.40	2.40	1.8	1.54	1.54
	468.00	476.90	8.90	6.8	0.45	0.45
	493.00	576.00	83.00	64.6	0.77	0.77
including	502.00	508.00	6.00	4.6	1.51	1.51
and	530.00	560.10	30.10	23.5	1.47	1.47
	595.25	610.00	14.75	11.7	0.54	0.54
including	596.00	599.00	3.00	2.4	1.13	1.13

MQD-22-076	192.00	196.00	4.00	2.8	0.46	0.46
	214.00	216.00	2.00	1.4	0.39	0.39
	355.00	358.15	3.15	2.4	0.38	0.38
	437.55	470.00	32.45	25.0	0.41	0.41
including	453.00	456.70	3.70	2.9	1.52	1.52
	483.50	489.40	5.90	4.6	0.35	0.35
	493.00	624.10	131.10	103.8	0.71	0.77
including	545.80	546.50	0.70	0.6	10.1	10.1
and	576.00	581.00	5.00	4.0	7.07	8.45
including	577.00	578.00	1.00	0.8	30.0	36.9
and	602.25	609.00	6.75	5.4	1.87	1.87
	641.00	644.00	3.00	2.4	0.46	0.46

MQD-22-080	82.75	86.60	3.85	2.6	0.35	0.35
	131.40	143.75	12.35	8.5	0.63	0.63
	181.30	187.80	6.50	4.6	0.40	0.40
	209.90	220.85	10.95	7.7	0.57	0.57
	246.40	271.20	24.80	17.7	0.91	0.91
including	246.40	252.20	5.80	4.1	3.44	3.44
	355.00	369.00	14.00	10.2	0.57	0.57
including	361.70	363.70	2.00	1.5	1.67	1.67
	382.00	385.45	3.45	2.5	0.63	0.63
	398.50	401.30	2.80	2.1	0.58	0.58
	418.00	421.00	3.00	2.2	0.54	0.54
	429.20	434.00	4.80	3.6	0.35	0.35
	458.00	460.70	2.70	2.0	0.59	0.59
	476.00	578.00	102.00	79.7	0.54	0.54
including	524.00	528.00	4.00	3.1	1.32	1.32
and	544.00	558.15	14.15	11.2	1.31	1.31
	613.00	616.00	3.00	2.4	0.37	0.37
	624.10	633.00	8.90	7.3	0.30	0.30
	643.00	670.95	27.95	23.1	0.39	0.39

MQD-22-085	63.60	74.10	10.50	7.1	0.38	0.38
	116.15	118.35	2.20	1.5	1.57	1.57
	150.00	195.70	45.70	32.2	0.33	0.33
	248.00	250.00	2.00	1.4	0.39	0.39
	256.00	258.00	2.00	1.4	0.41	0.41
	284.80	288.05	3.25	2.4	0.91	0.91
including	286.00	288.05	2.05	1.5	1.30	1.30
	337.00	342.00	5.00	3.7	0.30	0.30
	362.00	371.65	9.65	7.2	0.31	0.31
	382.45	388.00	5.55	4.1	0.30	0.30
	390.80	410.90	20.10	15.0	0.31	0.31
	419.00	489.00	70.00	53.1	0.78	0.78
including	422.00	428.00	6.00	4.5	2.07	2.07
including	427.00	428.00	1.00	0.8	10.0	10.0
and	443.00	446.00	3.00	2.3	1.09	1.09
and	457.00	472.00	15.00	11.4	1.07	1.07
and	481.00	485.00	4.00	3.1	2.10	2.10
	506.00	508.00	2.00	1.5	0.67	0.67
	521.25	550.00	28.75	22.4	0.50	0.50
	573.85	581.00	7.15	5.7	1.26	1.26
	665.20	671.55	6.35	5.1	0.35	0.35

MQD-22-087	78.00	81.55	3.55	2.4	0.43	0.43
	92.00	109.00	17.00	11.6	0.33	0.33
	189.00	228.00	39.00	27.3	0.42	0.42
including	206.00	210.00	4.00	2.8	1.22	1.22
	249.75	261.00	11.25	8.0	0.49	0.49
	289.50	298.70	9.20	6.6	0.42	0.42
including	294.50	296.65	2.15	1.6	1.07	1.07
	342.00	349.65	7.65	5.6	0.40	0.40
	369.00	393.70	24.70	18.2	1.07	1.09
including	370.65	371.55	0.90	0.7	20.6	20.6
	408.10	524.00	115.90	87.3	0.50	0.50
including	425.30	429.50	4.20	3.1	1.28	1.28
and	489.00	494.00	5.00	3.8	2.15	2.15
and	513.95	522.00	8.05	6.1	1.75	1.75
	536.90	567.65	30.75	23.6	2.11	2.11
including	539.55	567.65	28.10	21.6	2.23	2.23
including	540.30	540.60	0.30	0.2	28.3	28.3
and	555.20	558.30	3.10	2.4	11.5	11.5
	579.00	592.00	13.00	10.1	0.37	0.37
	628.65	634.00	5.35	4.2	0.48	0.48

MQD-22-090A	75.00	82.30	7.30	3.8	1.15	1.15
including	78.00	81.55	3.55	1.8	2.05	2.05
	94.00	98.00	4.00	2.1	0.54	0.54
	133.00	146.00	13.00	7.0	0.35	0.35
	193.00	196.00	3.00	1.6	0.39	0.39
	227.70	230.60	2.90	1.6	0.53	0.53
	238.55	240.85	2.30	1.3	0.42	0.42
	245.00	252.25	7.25	4.0	0.35	0.35
	287.35	292.75	5.40	3.0	0.44	0.44
	427.00	490.60	63.60	37.7	1.31	1.31
including	427.00	429.00	2.00	1.2	1.10	1.10
and	439.00	471.00	32.00	19.0	2.07	2.07
including	455.85	457.00	1.15	0.7	19.4	19.4
	503.85	508.00	4.15	2.5	0.73	0.73
	519.00	541.00	22.00	13.3	0.35	0.35
including	525.00	527.00	2.00	1.2	1.47	1.47
	552.05	579.50	27.45	16.8	0.48	0.48
including	574.00	576.00	2.00	1.2	1.14	1.14
Intersections calculated above at 0.3 g/t Au cut off with a top cut of 30 g/t Au and a maximum internal waste interval of 10 metres. Bordered intervals are intersections calculated above a 1.0 g/t Au cut off. Intervals in bold are those with a grade thickness factor exceeding 20 gram x metres / tonne gold. True widths are approximate and assume a subvertical body.

Table 2: Location of drill holes in this press release

HOLE	EAST	NORTH	RL	AZIMUTH	DIP	EOH
MQD-22-075	670,308	5,379,250	443	336°	-47°	675.1
MQD-22-076	670,379	5,379,296	442	338°	-47°	651.0
MQD-22-080	670,462	5,379,398	450	335°	-50°	675.05
MQD-22-083	670,667	5,379,431	433	156°	-50°	630.1
MQD-22-085	670,636	5,379,537	441	336°	-49°	675.0
MQD-22-087	670,546	5,379,463	449	336°	-49°	675.0
MQD-22-090A	670,654	5,379,625	429	346°	-60°	606.0
Approximate collar coordinates in NAD 83, Zone 15N

Analytical and QA/QC Procedures

All samples were sent to ALS Geochemistry in Thunder Bay for preparation and analysis was performed in the ALS Vancouver analytical facility. ALS is accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025. Samples were analyzed for gold via fire assay with an AA finish (“Au-AA23”) and 48 pathfinder elements via ICP-MS after four-acid digestion (“ME-MS61”). Samples that assayed over 10 ppm Au were re-run via fire assay with a gravimetric finish (“Au-GRA21”).

In addition to ALS quality assurance / quality control (“QA/QC”) protocols, Goldshore has implemented a quality control program for all samples collected through the drilling program. The quality control program was designed by a qualified and independent third party, with a focus on the quality of analytical results for gold. Analytical results are received, imported to our secure on-line database and evaluated to meet our established guidelines to ensure that all sample batches pass industry best practice for analytical quality control. Certified reference materials are considered acceptable if values returned are within three standard deviations of the certified value reported by the manufacture of the material. In addition to the certified reference material, certified blank material is included in the sample stream to monitor contamination during sample preparation. Blank material results are assessed based on the returned gold result being less than ten times the quoted lower detection limit of the analytical method. The results of the on-going analytical quality control program are evaluated and reported to Goldshore by Orix Geoscience Inc.

About Goldshore

Goldshore is an emerging junior gold development company, and owns the Moss Lake Gold Project located in Ontario. Wesdome Gold Mines Ltd. is currently a large shareholder of Goldshore with an approximate 27% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Lake Gold Project through the next stages of exploration and development.

About the Moss Lake Gold Project

The Moss Lake Gold Project is located approximately 100 km west of the city of Thunder Bay, Ontario. It is accessed via Highway 11 which passes within 1 km of the property boundary to the north. The Moss Lake Gold Project covers 14,292 hectares and consists of 282 unpatented and patented mining claims.

The Moss Lake Gold Project hosts a number of gold and base metal rich deposits including the Moss Lake Deposit (Table 3), the East Coldstream Deposit (Table 4), the historically producing North Coldstream Mine (Table 5), and the Hamlin Zone, all of which occur over a mineralized trend exceeding 20 km in length.

The Moss Lake Deposit hosts an estimated inferred mineral resource of 4.17 Moz Au (see Goldshore’s news release dated November 15, 2022). A technical report is being prepared in accordance with National Instrument 43-101 (“NI 43-101“) and will be available on the Company’s website and SEDAR within 45 days of November 15, 2022.

A historical mineral resource estimate (the “East Coldstream Historical Estimate“) was completed on the East Coldstream Deposit in 2011 by Foundation Resources Inc.²^,3 The East Coldstream Deposit is a shear-hosted disseminated-style gold deposit which locally outcrops at surface. It has been drilled over a 1.3 km length and to depths of 200 m with 138 holes completed between 1988 and 2017. The deposit remains largely open at depth and may have the potential for expansion along strike. Historic drill hole highlights from the East Coldstream Deposit include 4.86 g/t Au over 27.3 m in C-10-15.

The historically producing North Coldstream Mine is reported to have produced significant amounts of copper, gold and silver⁴ from mineralization with potential iron-oxide-copper-gold deposit style affinity. The exploration potential immediately surrounding the historic mining area is not currently well understood and historic data compilation is required.

The Hamlin Zone is a significant occurrence of copper and gold mineralization, and also of potential iron-oxide-copper-gold deposit style affinity. Between 2008 and 2011, Glencore tested Hamlin with 24 drill holes which successfully outlined a broad and intermittently mineralized zone over a strike length of 900 m. Historic drill hole highlights from the Hamlin Zone include 0.9 g/t Au and 0.35% Cu over 150.7 m in HAM-11-75.

The Moss Lake, East Coldstream and North Coldstream deposits sit on a mineral trend marked by a regionally significant deformation zone locally referred to as the Wawiag Fault Zone in the area of the Moss Lake Deposit. This deformation zone occurs over a length of approximately 20 km on the Moss Lake Gold Project and there is an area spanning approximately 7 km between the Moss Lake and East Coldstream deposits that is significantly underexplored.

Table 3: Mineral Resource Estimate (Moss Lake Deposit) ¹

Inferred Resources (Domains)	Tonnes (Mt)	Grade (g/t Au)	Contained Metal (Moz AU)
Shear	34.7	2.0	2.20
Intrusion	87	0.7	1.97
TOTAL	121.7	1.1	4.17

Notes:

(1) The Moss Lake Deposit hosts an estimated inferred mineral resource of 4.17 Moz Au (see Goldshore’s news release dated November 15, 2022). A technical report is being prepared in accordance with NI 43-101 and will be available on the Company’s website and SEDAR within 45 days of November 15, 2022.

Table 4: Historical Mineral Resources (East Coldstream Deposit) ²^,3

	INDICATED	INFERRED
	Tonnes	Grade (g/t Au)	Oz Au	Tonnes	Grade (g/t Au)	Oz Au
East Coldstream Total	3,516,700	0.85	96,400	30,533,000	0.78	763,276

Notes:
(2) Source: McCracken, T. “Technical Report and Resource Estimate on the Osmani Gold Deposit, Coldstream Property, Northwestern Ontario”, prepared for Foundation Resources Inc. and Alto Ventures Ltd. The East Coldstream Historical Estimate is based on a 0.4 g/t Au cut-off grade. The qualified persons for the East Coldstream Historical Estimate are Todd McCracken, P.Geo. (Tetratech Wardrop), and Jeff Wilson, Ph.D., P.Geo. (Tetratech Wardrop), and the effective date of the East Coldstream Historical Estimate is December 12, 2011. Resources are presented unconstrained, undiluted and in situ. The East Coldstream Historical Estimate includes 2 gold-bearing zones. A cut-off grade of 0.4 g/t Au was selected as the official resource cut-off grade. The East Coldstream Historical Estimate is based on 116 diamond drill holes drilled from 1986 to 2011. A fixed density of 2.78 g/cm3 was used. Capping was established at 5.89 g/t Au and 5.70 g/t Au for domains EC-1 and EC-2, respectively. This is supported by statistical analysis and the high grade distribution within the deposit. Compositing was done on drill hole sections falling within the mineralized zone solids (composite = 1 m). Resources were evaluated from drill hole samples using the ID2 interpolation method in a multi-folder percent block model using Datamine Studio 3 version 3.20.5321.0. Resource categorization is based on spatial continuity based from the variography of the assays within the drillholes. Ounce (troy) = metric tons x grade / 31.10348. Calculations used metric units (metres, tonnes and g/t). The number of metric tonnes was rounded to the nearest thousand. Any discrepancies in the totals are due to rounding effects; rounding followed the recommendations in NI 43-101.

(3) The reader is cautioned that the East Coldstream Historical Estimate is considered historical in nature and as such is based on prior data and reports prepared by previous property owners. The reader is cautioned not to treat it, or any part of it, as current mineral resources or reserves. The Company has determined this historical resource is reliable, and relevant to be included here in that it demonstrates simply the mineral potential of the Moss Lake Gold Project. A qualified person has not done sufficient work to classify the East Coldstream Historical Estimate as a current resource and Goldshore is not treating the East Coldstream Historical Estimate as a current resource. Significant data compilation, re-drilling, re-sampling and data verification may be required by a qualified person before the East Coldstream Historical Estimate can be classified as a current resource. There can be no assurance that any of the historical mineral resources, in whole or in part, will ever become economically viable. In addition, mineral resources are not mineral reserves and do not have demonstrated economic viability. Even if classified as a current resource, there is no certainty as to whether further exploration will result in any inferred mineral resources being upgraded to an indicated or measured mineral resource category. The East Coldstream Historical Estimate relating to inferred mineral resources was calculated using prior mining industry standard definitions and practices for estimating mineral resource and mineral reserves. Such prior definitions and practices were utilized prior to the implementation of the current standards of the Canadian Institute of Mining for mineral resource estimation, and have a lower level of confidence.

Table 5: Reported Historical Production (North Coldstream Deposit) ⁴

Deposit	Tonnes	Cu %	Au g/t	Ag	Cu lbs	Au oz	Ag oz
Historical Production	2,700,0000	1.89	0.56	5.59	102,000,000	44,000	440,000

Note:

(4) Source: Schlanka, R., 1969. Copper, Nickel, Lead and Zinc Deposits of Ontario, Mineral Resources Circular No. 12, Ontario Geological Survey, pp. 314-316.

Peter Flindell, P.Geo., MAusIMM, MAIG, Vice President – Exploration of the Company, a qualified person under NI 43-101 has approved the scientific and technical information contained in this news release.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

For More Information – Please Contact:

Brett A. Richards
President, Chief Executive Officer and Director
Goldshore Resources Inc.

P. +1 604 288 4416 M. +1 905 449 1500
E. brichards@goldshoreresources.com
W. www.goldshoreresources.com

Facebook: GoldShoreRes | Twitter: GoldShoreRes | LinkedIn: goldshoreres

Cautionary Note Regarding Forward-Looking Statements

This news release contains statements that constitute “forward-looking statements.” Such forward looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur.

Forward-looking statements in this news release include, among others, statements relating to expectations regarding the exploration and development of the Moss Lake Gold Project, plans to conduct a preliminary economic assessment and timing thereof, updating the mineral resource estimates, the filing of a technical report to support the mineral resource estimate at the Moss Lake Deposit, and other statements that are not historical facts. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors and risks include, among others: the Company may require additional financing from time to time in order to continue its operations which may not be available when needed or on acceptable terms and conditions acceptable; compliance with extensive government regulation; domestic and foreign laws and regulations could adversely affect the Company’s business and results of operations; the stock markets have experienced volatility that often has been unrelated to the performance of companies and these fluctuations may adversely affect the price of the Company’s securities, regardless of its operating performance; the ongoing military conflict in Ukraine; and other risk factors outlined in the Company’s public disclosure documents.

The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. The Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/145867

Tags #BrettRichards, #GoldShoreResources, #GSHR, #InvestingInBatteryMetals, #InvestingInCopper, #JuniorMining, #MauriceJackson, #MilesFranklin, #MossLakeProject, #PreciousMetals, #ProvenAndProbable, Canadian Mining Stocks, maurice jackson, proven and probable

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

Category: Blog

Lion One Discovers New Near-Surface Lode at Tuvatu and Intersects Ore-Grade Mineralization Associated with Near-Mine CSAMT Anomaly

Silver Bullet Mines Provides Update on Idaho and Arizona Mines

Collective Mining Drills 298.6 Metres at 1.54 g/t Gold Equivalent and 102.20 metres at 3.38 g/t Gold Equivalent into the Main Breccia Discovery at Apollo

Silver Bullet Mines Closes Final Tranche of Financing

Rover Metals Provides Corporate Update, Including Analyst Report

Ari Sussman from Collective Mining to Present at OTC Markets Group Metals & Mining Virtual Investor Conference on December 8th, 2022

Collective Mining – Expands the Main Breccia at Apollo

The Best Video on WHY and WHEN to Buy and Sell Physical Precious Metals:

Stillwater Critical Minerals Files Early Warning Report Regarding its Holdings of Heritage Mining

Collective Mining Significantly Expands the Main Breccia Discovery at Apollo and Drills Near Surface High-Grade Mineralization Including 168.6 Metres at 2.91 g/t Gold Equivalent

Goldshore Intersects Additional High-Grade Shears in the QES Zone at the Moss Lake Gold Project

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

FOUNDATIONAL READING

The Best Video on WHY and WHEN to Buy and Sell Physical Precious Metals:

Sign up to Stay Up to Date on News and Progress from Page