VANCOUVER, British Columbia, Sept. 08, 2022 (GLOBE NEWSWIRE) — Rover Metals Corp. (TSXV: ROVR) (OTCQB: ROVMF) (FSE:4XO) (“Rover” or the “Company”) further to its release of August 16, 2022, Rover is pleased to announce the launch of its new website showcasing the pivot by the Company into critical minerals. On August 16, 2022, the Company announced its intent to option a 90% ownership interest in the Indian Mountain Lake VMS project, NT, Canada.
Indian Mountain Lake VMS Project The Indian Mountain Lake VMS Project has had exploration dating back to the 1940s and has a historical resource spread across four zones on the project. The BB Zone and Kennedy Lake Zone have a combined historic resource of 1,400,000 tons grading 10% combined zinc and lead with 3.5 OPT (ounces per ton) of silver*. Approximately 900 metres west of the BB Zone, the Kennedy Lake West Zone has a historic resource of 610,000 tons grading 1.15% copper*. About 8 km southeast of the BB Zone, the Susu Lake Zone, has a historical resource consisting of 142,500 tons grading 0.95% copper*.
The property is located approximately 195 km east-northeast of Yellowknife, NT, off the eastern arm of Great Slave Lake. Seasonal access relies upon fixed or rotor wing support. A right of way was cleared to the project from Thompson Landing in the 1970s. If this right of way were to be brushed out it would provide barge access at Thompson Landing, from Yellowknife, with ground transportation, considerably lowering any logistical costs. Future Government of Canada federally funded hydro-energy infrastructure could come close to the project if the Taltson Hydro Dam expansion proceeds through the eastern arm of Great Slave Lake into Yellowknife. At the southwest-end of Great Slave Lake, Osisko Metals is gearing up to reopen the Pine Point Zinc-Lead Mine. At nearby Hay River, NT, there is a rail line to the Teck Resources Zinc Refinery in Trail, BC.
*These resources are historic in nature. Further drilling is needed to bring them up to CIM Definition Standards. The historic data has not been verified by Rover. The historic information is provided in the 2103 Assessment Report for Indian Mountain Lake which is in public record with the Government of the Northwest Territories.
Technical information has been approved by Gary Vivian, M.Sc., P.Geo., QP for the purposes of NI 43-101.https://embed.fireplace.yahoo.com/embed?ctrl=Monalixa&m_id=monalixa&m_mode=document&site=sports&os=android&pageContext=%257B%2522ctopid%2522%253A%25221542500%253B1577000%2522%252C%2522hashtag%2522%253A%25221542500%253B1577000%2522%252C%2522wiki_topics%2522%253A%2522Indian_Mountain_Lake%252C_Pennsylvania%253BCompany%253BGreat_Slave_Lake%253BTSX_Venture_Exchange%253BGovernment_of_Canada%253BYellowknife%253BCanada%253BVancouver%253BMetal%2522%252C%2522lmsid%2522%253A%2522a0770000002m0AbAAI%2522%252C%2522revsp%2522%253A%2522globenewswire.com%2522%252C%2522lpstaid%2522%253A%2522536092c9-1665-3bdf-9dc6-31420ca7ae8e%2522%252C%2522pageContentType%2522%253A%2522story%2522%257D
An updating release will be provided once the Company has executed its Definitive Option Agreement for the Indian Mountain Lake project.
Judson Culter, CEO at Rover Metals, states “We see tremendous growth coming for critical minerals fueled by domestic EV demand in the U.S. and Canada. We are also excited to see initiatives being put in place by the securities regulators to help publicly traded junior mining companies succeed, this includes enforcing rules against manipulative stock trading practices, such as naked short selling.”
Corporate Update A Q&A interview with Rover’s CEO, Judson Culter, is now also available for viewing here.
Upcoming Conference Rover Metals will be presenting at the Redefining Electric Metals Conference in Calgary, AB, on September 19th and 20th. Registration is at www.redefiningelectricalmetals.com
Shares for Services Agreement The Toronto Venture Exchange (TSXV) has approved a shares for services agreement with one of the Company’s Advisors (the “Services Agreement”). The Services Agreement calls for monthly advisory services of $7,500 to be settled through the issuance of common shares in the Company for a three-month period beginning July 1, 2022 and ending on September 30, 2022. Thereafter, for the final three months of the contract, the monthly fee shall revert to $5,000 per month, with up to 50% of the $5,000 monthly fee to be settled in common shares of the Company, at the option of the Company. The share issuances shall be made on a quarterly basis, and the conversion price shall be the higher of: (1) closing price on the last trading day of the calendar business quarter, or (2) the five day VWAP at the end of the quarter. In connection with TSXV policy, the conversion price shall not be lower then $0.05 per share.
About Rover Metals Rover is a publicly traded junior mining company that trades on the TSXV under symbol ROVR, on the OTCQB under symbol ROVMF, and on the FSE under symbol 4XO. The Company is now developing both: (1) critical minerals projects; as well as (2) precious metals projects. The Company is exclusive to the mining jurisdictions of Canada and the U.S. Five of the Company’s mineral resource development projects are located near to the city of Yellowknife, 60th parallel, Canada.
ON BEHALF OF THE BOARD OF DIRECTORS “Judson Culter” Chief Executive Officer and Director
For further information, please contact: Email: info@rovermetals.com Phone: +1 (778) 754-2617
Statement Regarding Forward-Looking Information This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause Rover’s actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur. There can be no assurance that such statements prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements, and readers are cautioned not to place undue reliance on these forward-looking statements. Any factor could cause actual results to differ materially from Rover’s expectations. Rover undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.
THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE REPRESENTS THE EXPECTATIONS OF THE COMPANY AS OF THE DATE OF THIS NEWS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE COMPANY MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE LAWS.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OF THIS RELEASE.
Highlights include 16.9m @ 2.82g/t PGM + Au, plus 0.23% Ni Sulphide, and
13.6m @ 2.67g/t PGM + Au, plus 0.23% Ni Sulphide
VANCOUVER, BC, Sept. 7, 2022 /CNW/ – Bravo Mining Corp. (TSX.V: BRVO), (“Bravo” or the “Company“) today announced that it has received assay results from a further twelve infill diamond drill holes (“DDH”), from its wholly owned Luanga PGM (palladium + platinum + rhodium) + gold + nickel project (“Luanga“), located in the Carajás Mineral Province, state of Pará, Brazil. Samples for a further 34 drill holes (including 18 re-assay holes) are already at the laboratory for analysis with results pending. Both downhole and surface electromagnetic (“EM”) programs are also underway to follow up on the previously announced massive sulphide intercept.
“The infill drilling and historic core re-assay programs continue to advance rapidly. As we receive more assay results, we continue to see results comparable to the historic grades and thicknesses, increasing our confidence in the prior work completed at Luanga,” said Luis Azevedo, Chairman and CEO of Bravo. “The Company is also following up on the recently discovered nickel and copper massive sulphide mineralization that had not been previously identified at Luanga. Downhole EM assisted with the placement of the two follow-up holes (results pending) and the design for drilling on the next drill section. Surface EM will also start shortly, which we hope will greatly assist in vectoring-in and following these potential feeder zone(s).”
Highlights
Assay results from infill drilling continue to compare well with the drill holes on their neighbouring historic drill sections in both tenor and mineralized thicknesses.
Highlights of Bravo’s recent intercepts are tabulated below, with details attached:
HOLE-ID
From(m)
To(m)
Thickness (m)
Pd(g/t)
Pt(g/t)
Rh(g/t)
Au (g/t)
Ni % (Sulphide)
PGM + Au (g/t)
TYPE
DDH22LU005
93.0
124.0
31.0
1.19
0.59
0.09
0.11
0.16
1.98
FR
DDH22LU018
90.8
107.7
16.9
1.60
0.89
0.22
0.10
0.23
2.82
FR
DDH22LU019
0.0
64.2
64.2
0.58
0.29
0.04
0.07
NA
0.99
Ox/FR
Including
50.6
64.2
13.6
1.58
0.80
0.14
0.16
0.22
2.67
FR
Notes:
All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole.
Given the orientation of the holes and the mineralization, the intercepts are estimated to range from ~75 to 95% of true thickness.
Type: Ox = Oxide. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization.
NA: Not Applicable as intercept is oxide or a mix of oxide and fresh rock mineralization.
Additional results from historic drill hole re-assaying are expected in the following weeks.
Following DHTEM, two new drill holes on the same section have been completed (results pending);
Drilling on the next section to the north is expected to start soon; and
Surface Fixed Loop TEM (FLTEM) surveying is expected to commence shortly.
67 drill holes have been completed, for a total of 11,091 metres (or 43% of Phase 1 Drilling Program), including 5 twin holes and 6 metallurgical holes.
9,621 samples submitted for assay to date including 2,943 re-assay samples from historic drill core.
6 drill rigs operating onsite.
Luanga Drill Program
The Phase 1 diamond drill program continues as planned at Luanga. With six drill rigs on site, drilling is now progressing in various locations along the entire 7km strike length of the known Luanga mineralized envelope (defined by historic drilling), including to the north where high-grade massive sulphide nickel/copper mineralization was intersected (see August 16rd, 2022 news release). DHTEM has been completed on this hole (see picture below), and two more drill holes have been completed on the same drill section (results pending), with two more holes about to commence on the section to the north. Surface FLTEM surveying is expected to start soon, to the south of the massive sulphide intercept. To date, 67 DDH have been completed for a total of 11,091m from the planned 25,500m Phase 1 drill program.
Phase 1 drilling is primarily designed to confirm, infill, and step out from the previously defined PGM+Au+Ni mineralization in order to increase confidence in the geological model and provide the basis for future mineral resource estimates. Additionally, drilling will target potential extensions to the mineralization at depth and, given the more recent discovery of massive sulphides, evaluate the potential of this new style of mineralization.
Commencement of DHTEM Surveying at Luanga – DDH22LU049 (CNW Group/Bravo Mining Corp.)
Location of Bravo Drilling Reported in this Document (CNW Group/Bravo Mining Corp.)
Complete Table of Assay Results
HOLE-ID
From(m)
To(m)
Thickness (m)(1)
Pd(g/t)
Pt(g/t)
Rh(g/t)
Au (g/t)
Ni % (Sulphide)
PGM + Au (g/t)
TYPE
DDH22LU005
93.0
124.0
31.0
1.19
0.59
0.09
0.11
0.16
1.98
FR
DDH22LU009
47.6
62.4
14.8
1.01
0.55
0.08
0.02
0.20
1.67
FR
DDH22LU010
29.7
33.0
3.3
0.71
0.45
0.13
0.01
0.08
1.30
FR
And
47.9
55.0
7.1
0.65
0.33
0.05
0.01
0.08
1.04
FR
And
64.0
73.1
9.1
0.77
0.35
0.06
0.01
0.10
1.19
FR
And
87.4
98.4
11.0
0.60
0.34
0.06
0.01
0.08
1.02
FR
DDH22LU011
84.2
88.2
4.0
0.98
0.46
0.09
0.03
0.14
1.56
FR
DDH22LU012
No Significant Result
DDH22LU013
0.0
5.9
5.9
0.49
0.30
0.05
0.01
NA
0.86
Ox
And
98.9
EOH
1.3
1.01
0.18
0.05
001
0.13
1.25
FR
DDH22LU014
25.3
31.7
6.4
0.77
0.29
0.05
0.01
NA
1.12
Ox
And
43.4
61.4
18.0
0.55
0.22
0.04
0.03
0.09
0.83
FR
And
66.0
70.0
4.0
0.85
0.32
0.05
0.02
0.14
1.23
FR
And
81.0
90.0
9.0
0.89
0.35
0.05
0.02
0.15
1.31
FR
And
102.0
111.6
9.6
1.07
0.39
0.06
0.03
0.08
1.55
FR
DDH22LU015
0.0
28.0
28.0
0.31
0.14
0.02
0.04
NA
0.52
Ox
And
57.8
71.0
13.2
0.59
0.23
0.05
0.01
0.36
0.88
FR
And
88.5
100.5
12.0
0.25
0.13
0.02
0.03
0.31
0.42
FR
DDH22LU017
0.0
11.2
11.2
0.81
0.47
0.09
0.02
NA
1.39
Ox
And
18.2
23.2
5.0
0.52
0.51
0.08
0.01
NA
1.12
Ox
And
85.9
88.9
3.0
1.15
0.44
0.06
0.01
0.05
1.66
FR
And
126.0
141.0
15.0
1.22
0.54
0.10
0.08
0.17
1.95
FR
DDH22LU018
59.9
71.9
12.0
0.55
0.26
0.08
0.04
0.19
0.93
FR
And
90.8
107.7
16.9
1.60
0.89
0.22
0.10
0.23
2.82
FR
DDH22LU019
0.0
64.2
64.2
0.58
0.29
0.04
0.07
NA
0.99
Ox/FR
Including
50.6
64.2
13.6
1.58
0.80
0.14
0.16
0.22
2.67
FR
And
74.2
78.8
4.6
0.60
0.52
0.07
0.02
0.10
1.21
FR
DDH22LU020
0.0
9.0
9.0
1.38
0.52
0.10
0.02
NA
2.02
Ox
And
13.0
31.7
18.7
0.98
0.38
0.07
0.04
NA
1.46
Ox/FR
And
55.4
117.4
62.0
0.35
0.25
0.01
0.01
0.01
0.61
FR
Notes:
All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole.
Given the orientation of the holes and the mineralization, the intercepts are estimated to range from ~75 to 95% of true thickness.
Type: Ox = Oxide. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization.
NA: Not Applicable as intercept is oxide or a mix of oxide and fresh rock mineralization.
About Bravo Mining Corp.
Bravo is a Canada and Brazil-based mineral exploration and development company focused on advancing its Luanga PGM + Au + Ni Project in the world-class Carajás Mineral Province of Brazil.
The Luanga Project benefits from being in a location close to operating mines, with excellent access and proximity to existing infrastructure, including road, rail and clean and renewable hydro grid power. The project area was previously de-forested for agricultural grazing land. Bravo’s current Environmental, Social and Governance activities includes replanting trees in the project area, hiring and contracting locally, and ensuring protection of the environment during its exploration activities.
Bravo was founded by a management team and board with extensive Brazilian and PGM exploration, permitting, project financing, construction and operating experience. This includes Luis Azevedo, Executive Chairman & CEO; Simon Mottram, President; Alex Penha, EVP Corporate Development; and Independent Directors, Dr. Nicole Adshead-Bell (Lead Director), Stuart Comline, Tony Polglase and Stephen Quin.
Technical Disclosure
Technical information in this news release has been reviewed and approved by Simon Mottram, F.AusIMM (Fellow Australia Institute of Mining and Metallurgy), President of Bravo Mining Corp. who serves as the Company’s “qualified person”, as defined in National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101“). Mr. Mottram has verified the technical data and opinions contained in this news release.
Forward Looking Statements
This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as “expectations”, “confirm”, “hope”, “potential”, “designed”, “increase confidence”, “interpreted”, “pending”, and other similar words, phrases or statements that certain events or conditions “should”, or “will” occur. In particular, this news release contains forward-looking information pertaining to the Company’s ongoing re-assay and drill programs and the results thereof; the expected arrival of geophysical equipment and the results of such surveys; the potential for the definition o new styles of mineralization and extensions to depth and the Company’s plans in respect thereof. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, environmental risks, limitations on insurance coverage; and other risks and uncertainties involved in the mineral exploration and development industry. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including, but not limited to, the assumption that the assay results confirm the interpreted mineralization contains significant values of nickel, copper and also contain PGMs and Au; final drill and assay results will be in line with management’s expectations; that activities will not be adversely disrupted or impeded by regulatory, political, community, economic, environmental and/or healthy and safety risks; that the Luanga Project will not be materially affected by potential supply chain disruptions; and general business and economic conditions will not change in a materially adverse manner. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.
Schedule 1: Drill Hole Collar Details
HOLE-ID
Company
East (m)
North (m)
RL (m)
Datum
Depth (m)
Azimuth
Dip
DDH22LU005
Bravo
657399.97
9339804.76
259.36
SIRGAS2000 UTM22S
152.35
360.00
-60.00
DDH22LU009
Bravo
659101.84
9341075.30
232.45
SIRGAS2000 UTM22S
200.50
360.00
-60.00
DDH22LU010
Bravo
659852.14
9341580.93
221.61
SIRGAS2000 UTM22S
160.25
330.00
-60.00
DDH22LU011
Bravo
659028.75
9341007.34
241.87
SIRGAS2000 UTM22S
100.20
330.00
-60.00
DDH22LU012
Bravo
659850.54
9341825.16
255.78
SIRGAS2000 UTM22S
200.10
330.00
-60.00
DDH22LU013
Bravo
659938.89
9341630.21
219.39
SIRGAS2000 UTM22S
151.10
90.00
-60.00
DDH22LU014
Bravo
656999.90
9339580.01
270.50
SIRGAS2000 UTM22S
100.15
330.00
-60.00
DDH22LU015
Bravo
659925.01
9341825.05
265.24
SIRGAS2000 UTM22S
151.35
360.00
-60.00
DDH22LU017
Bravo
659913.93
9341673.10
231.91
SIRGAS2000 UTM22S
199.05
90.00
-60.00
DDH22LU018
Bravo
659164.67
9341072.65
235.07
SIRGAS2000 UTM22S
150.30
330.00
-60.00
DDH22LU019
Bravo
659924.98
9341725.04
239.05
SIRGAS2000 UTM22S
150.25
330.00
-60.00
DDH22LU020
Bravo
657000.03
9339654.43
288.60
SIRGAS2000 UTM22S
150.00
330.00
-60.00
Schedule 2: Assay Methodologies and QAQC
Samples follow a chain of custody between collection, processing and delivery to the ALS laboratory in Parauapebas, state of Pará, Brazil. The drill core is delivered to the core shack at Bravo’s Luanga site facilities and processed by geologists who insert certified reference materials, blanks and duplicates into the sampling sequence. Drill core is half cut and placed in secured polyurethane bags, then in security-sealed sacks before being delivered directly from the Luanga site facilities to the Parauapebas ALS laboratory by Bravo staff. Additional information about the methodology can be found on the ALS global website (ALS) in the analytical guides.
Quality Assurance and Quality Control (“QAQC“) is maintained internally at the lab through rigorous use of internal certified reference materials, blanks, and duplicates. An additional QAQC program is administered by Bravo using certified reference materials, duplicate samples and blank samples that are blindly inserted into the sample batch. If a QAQC sample returns an unacceptable value an investigation into the results is triggered and when deemed necessary, the samples that were tested in the batch with the failed QAQC sample are re-tested.
Diamcor Mining Inc.Diamcor Mining Inc.Wed, September 7, 2022 at 9:00 AMIn this article:
DMIFF-4.47%
KELOWNA, BC / ACCESSWIRE / September 7, 2022 / Diamcor Mining Inc. (TSX-V.DMI)(OTCQB:DMIFF)(FRA:DC3A), (“Diamcor” or, the “Company”) announces today the results of its second tender and sale of rough diamonds recovered from the processing of quarry material from the Company’s Krone-Endora at Venetia Project (the “Project”) held during the current quarter. In the second tender and sale of its second fiscal quarter, the Company sold a total of 1,836.52 carats of rough diamonds including the previously announced 59.35 carat gem diamond, generating gross revenues of USD $1,621,559.42, resulting in an average price of USD $882.95 per carat.
Highlights
The larger gem quality 59.35 carat special rough diamond clearly enhanced the overall average dollar per carat achieved in the second tender and sale of the quarter, and is further confirmation of the potential for these types of rough diamonds to be recovered from the deposits and positively affect gross revenues.
The results of the tender and sale exclusive of the 59.35 carat special rough diamond was 1,777.17 carats, generating gross revenues of USD $425,423.42, resulting in an average price of USD $239.38 per carat.
Although the total number of carats sold to date this quarter is greater than the previous quarter, the total number of carats offered for tender and sale was lower than anticipated, largely a result of the significant Eskom power outages experienced in South Africa during July and August, and the resulting loss of operational hours during those months. Additionally, while the average dollar per carat net of the 59.35 carat rough diamond remained consistent with recent sales, the percentage of +2.0 carat rough diamonds appeared to be lower than normal. This deficiency is believed to be the result of errors in the Project’s final recovery systems, which may have been caused by repeated power supply issues. With both the Eskom outages and power variations now ended for the most part, the Company has undertaken a full review of these systems to ensure any potential for further issues in this area have been minimized moving forward.
In total, 3,776.33 carats have now been sold in the current quarter to date, generating gross revenues of USD $2,099,951.32 resulting in an average price of USD $556.08 per carat inclusive of the 59.35 carat special rough diamond. These gross revenues in the current quarter represent a 276% increase from the gross revenues generated in the previous quarter ending June 30, 2022.
“We are very pleased with the strong results achieved at our latest tender and sale, despite dealing with the significant challenges of operational interruptions and the resulting lower processing volumes caused by the rolling blackouts implemented by South Africa’s national power supplier, Eskom.”, stated Mr. Dean Taylor, Diamcor CEO. “The revenues achieved confirm the potential and value of recovering large gem quality rough diamonds in the specials category, and with the country’s power supply now appearing to have stabilized, we look forward to increased processing volumes through to the end of this year and the potential of recovering additional large rough diamonds in the specials category.”
Update on the Annual Filings and Revocation of the MCTO
The Company is also pleased to announce that the delay in filing its audited financial statements and corresponding management’s discussion and analysis for the year ended March 31, 2022, resulting from the ongoing delays in South Africa related to Stage 6 load-shedding (also known as rolling blackouts) in July by the state-owned electricity utility, Eskom, has been rectified. The Company is now current in its required filings, and the Management Cease Trade Order detailed in its news releases on July 29, 2022, and August 12, 2022, has been revoked by the British Columbia Securities Commission.
About Diamcor Mining Inc.
Diamcor Mining Inc. is a fully reporting publicly traded junior diamond mining company which is listed on the TSX Venture Exchange under the symbol V.DMI, and on the OTC QB International under the symbol DMIFF. The Company has a well-established operational and production history in South Africa and extensive prior experience supplying rough diamonds to the world market.
About the Tiffany & Co. Alliance
The Company has established a long-term strategic alliance and first right of refusal with Tiffany & Co. Canada, a subsidiary of world famous New York based Tiffany & Co., to purchase up to 100% of the future production of rough diamonds from the Krone-Endora at Venetia Project at then current prices to be determined by the parties on an ongoing basis. In conjunction with this first right of refusal, Tiffany & Co. Canada also provided the Company with financing to advance the Project. Tiffany & Co. is now owned by Moet Hennessy Louis Vuitton SE (LVMH), a publicly traded company which is listed on the Paris Stock Exchange (Euronext) under the symbol LVMH and on the OTC under the symbol LVMHF. For additional information on Tiffany & Co., please visit their website at www.tiffany.com.
About Krone-Endora at Venetia
In February 2011, Diamcor acquired the Krone-Endora at Venetia Project from De Beers Consolidated Mines Limited, consisting of the prospecting rights over the farms Krone 104 and Endora 66, which represent a combined surface area of approximately 5,888 hectares directly adjacent to De Beers’ flagship Venetia Diamond Mine in South Africa. On September 11, 2014, the Company announced that the South African Department of Mineral Resources had granted a Mining Right for the Krone-Endora at Venetia Project encompassing 657.71 hectares of the Project’s total area of 5,888 hectares. The Company has also submitted an application for a mining right over the remaining areas of the Project. The deposits which occur on the properties of Krone and Endora have been identified as a higher-grade “Alluvial” basal deposit which is covered by a lower-grade upper “Eluvial” deposit. The deposits are proposed to be the result of the direct-shift (in respect to the “Eluvial” deposit) and erosion (in respect to the “Alluvial” deposit) of material from the higher grounds of the adjacent Venetia Kimberlite areas. The deposits on Krone-Endora occur in two layers with a maximum total depth of approximately 15.0 metres from surface to bedrock, allowing for a very low-cost mining operation to be employed with the potential for near-term diamond production from a known high-quality source. Krone-Endora also benefits from the significant development of infrastructure and services already in place due to its location directly adjacent to the Venetia Mine.
Qualified Person Statement:
Mr. James P. Hawkins (B.Sc., P.Geo.), is Manager of Exploration & Special Projects for Diamcor Mining Inc., and the Qualified Person in accordance with National Instrument 43-101 responsible for overseeing the execution of Diamcor’s exploration programmes and a Member of the Association of Professional Engineers and Geoscientists of Alberta (“APEGA”). Mr. Hawkins has reviewed this press release and approved of its contents.
This press release contains certain forward-looking statements. While these forward-looking statements represent our best current judgement, they are subject to a variety of risks and uncertainties that are beyond the Company’s ability to control or predict and which could cause actual events or results to differ materially from those anticipated in such forward-looking statements. Further, the Company expressly disclaims any obligation to update any forward looking statements. Accordingly, readers should not place undue reliance on forward-looking statements.
WE SEEK SAFE HARBOUR
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Plan View of the Guayabales Project Highlighting the Apollo Target Area
Figure 2
Plan View of the Apollo Target Area Outlining the Porphyry and Breccia Targets, their Related Soil Anomalies and Drill Holes Completed or Currently Underway
Figure 3
Plan View of Apollo with Drill Hole Traces Completed to Date Highlighting the New High-Grade Vein System and Northern Breccia System Discoveries from Pad 2 and Pad 1 Respectively
APC-4, which is the first hole drilled to test a grassroot generated vein target located shallower and above the Main Breccia discovery at Apollo cut a near surface zone of sheeted veins and returned:
APC-7 and predecessor scout hole OLCS-3 were drilled to test a grassroot generated breccia target located 250 metres to the north of the Main Breccia discovery at Apollo and intersected multiple zones of mineralization between 45 metres and 320 metres below surface including:
41.8 metres @ 1.07 g/t gold equivalent; and
38.4 metres @ 1.51 g/t gold equivalent
Four rigs continue to actively drill at the Guayabales project with assay results anticipated in the near term for two holes as follows:
APC-6 and APC-8 tested the Main Breccia discovery at Apollo with both holes intersected more than 265 metres of potentially favourable mineralization
TORONTO, Sept. 07, 2022 (GLOBE NEWSWIRE) — Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from reconnaissance holes completed designed to test new ideas at the Apollo target (“Apollo”) at the Company’s Guayabales project located in Caldas, Colombia. Targets within Apollo consists of hydrothermal breccia, porphyry and vein systems including the recently discovered copper-gold-silver Main Breccia highlighted by drill hole APC-2, which intersected 207.15 metres @ 2.68 g/t AuEq (see press release dated August 10, 2022). Apollo is one of eight porphyry-related target zones situated within a three-by-four-kilometre cluster area generated by the Company through grassroots exploration at the Guayabales project. As part of its fully funded 20,000+ metre drill program for 2022, there are currently three diamond drill rigs operating at the Apollo target with an additional rig drilling from underground at the Olympus target.
“Our very first reconnaissance drill holes undertaken outside of the Main Breccia at Apollo has led to some very positive and exciting surprises which include the presence of a high grade late-stage porphyry related CBM vein zone adjacent to our exciting Main Breccia discovery. These discoveries attest to the amazing potential of the Apollo target area, which continues to expand as we step-out with drilling. Over the coming months, our drilling will be aggressively focused on flushing out the multi-million-ounce potential of the Main Breccia discovery at Apollo, but without question the new discoveries announced today highlight excellent additional opportunities for follow up in the future,” commented Ari Sussman, Executive Chairman.
Details (See Table 1 and Figures 1 – 3)
The Company recently completed five scout and reconnaissance diamond drill holes to test various conceptual targets locating within the Apollo area but outside of the Main Breccia discovery. APC-4 was designed to test a zone of northwest trending high grade, carbonate base metal veins (“CBM”), located shallower and above the Main Breccia system. APC-7 and the earlier drilled scout hole, OLCS-3, drilled beneath surface soil anomalies and discovered new, mineralized breccia bodies located approximately 250 metres north of the Main Breccia system.
APC-4, which was drilled to the southeast from Pad 2, intersected a high-grade zone of sheeted CBM veins and returned:
17.5 metres @ 12.79 g/t Au and 21 g/t Ag from 132.3 metres (65 metres vertical) including 0.65 metres @ 331.47 g/t Au and 53 g/t Ag
Mineralization relates to multiple sheeted CBM veins hosting sphalerite and pyrite sulphides.
APC-7 and OLCS-3 were drilled to the southwest from Pad 1 and intersected multiple mineralized breccia bodies at various depths and returned the following intercepts:
In addition to the new CBM vein discoveries a further two reconnaissance holes were drilled south from Pad 1 and southeast from Pad 2 to respectively test for breccia mineralisation and a mineralised porphyry body. Diamond Hole APC-9 had to be discontinued due to drilling problems and stopped short of the target zone. Diamond Hole APC-10 intersected altered quartz diorites with a porphyry vein stockwork and hosting anomalous copper, molybdenum, and gold values. The hole is interpreted to be peripheral to the main porphyry target as defined by copper soil anomalism and surface mapping. Further drilling is warranted in the future to better test both conceptual targets. Drill holes APC-12, APC-13 and APC-14 are underway with all three holes targeting the Main Breccia discovery at Apollo. Assay results for holes APC-6 and APC-8 are expected in the near term, with both holes intercepting more than 265 metres of potentially favourable mineralization.
The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers an 800 metre X 700 metre area. The Apollo target area hosts the Company’s new grassroots Main Breccia discovery plus additional yet untested breccia, porphyry and vein targets. The Apollo target area also remains open for further expansion.
Table 1: Assays Results
HoleID
From (m)
To (m)
Intercept (m)
Au (g/t)
Ag (g/t)
AuEq (g/t)*
Notes
APC-4
132.30
149.80
17.50
12.79
21
New sheeted vein discovery
143.60
144.25
0.65
331.47
53
APC-7
85.65
111.20
25.55
0.40
23
0.69
New Northern Breccia discovery
Incl
110.10
111.20
1.10
5.62
158
7.48
APC-7
199.85
238.25
38.40
1.30
21
1.51
Incl
207.10
222.35
15.25
2.29
33
2.62
and
325.00
345.45
20.45
0.49
31
0.89
OLCS-3
37.00
78.80
41.80
0.64
34
1.07
New Northern Breccia discovery
Incl
38.50
48.90
10.40
1.67
36
2.08
73.60
78.80
5.20
0.78
117
2.33
APC-9
NSV**
APC-10
NSV**
*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.95) + (Ag g/t x 0.014 x 0.95) utilizing metal prices of Ag – $20/oz and Au – US$1,400/oz and recovery rates of 95% for Au, Ag. Recovery rate assumptions are speculative as no metallurgical work has been completed to date. A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut. ** NSV: No significant Values
To see our latest corporate presentation and related information, please visit www.collectivemining.com
Collective Mining is an exploration and development company focused on identifying and exploring prospective mineral projects in South America. Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, the mission of the Company is to repeat its past success in Colombia by making significant new mineral discoveries and advance the projects to production. Management, insiders and close family and friends own nearly 45% of the outstanding shares of the Company and as a result, are fully aligned with shareholders.
The Company currently holds an option to earn up to a 100% interest in two projects located in Colombia. As a result of an aggressive exploration program on both the Guayabales and San Antonio projects, a total of eight major targets have been defined. The Company has made significant grassroot discoveries at both projects with near-surface discovery holes at the Guayabales project yielding 302 metres at 1.11 g/t AuEq at the Olympus target, 163 metres at 1.3 g/t AuEq at the Donut target and recently, at the Apollo target, 207.15 metres at 2.68 g/t AuEq, 180.6 metres at 2.43 g/t AuEg and 87.8 metres at 2.49 g/t AuEg. At the San Antonio project, the Company intersected, from surface, 710 metres at 0.53 AuEq. (See related press releases on our website for AuEq calculations)
Qualified Person (QP) and NI43-101 Disclosure
David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG). Technical Information
Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.
Contact Information
Collective Mining Ltd. Steven Gold, Vice President, Corporate Development and Investor Relations Tel. (416) 648-4065
FORWARD-LOOKING STATEMENTS This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.
Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.
VANCOUVER, BC / ACCESSWIRE / September 7, 2022 / Metallic Minerals (TSX.V:MMG)(OTCQB:MMNGF) (“Metallic Minerals“, or the “Company“) is pleased to announce that it has acquired 100% interest in 5 square kilometres (“km2“) of new mineral properties in the Keno Hill silver district of Canada’s Yukon Territory, bringing the Company’s total district hard-rock land position to 171 km2. Each of these newly acquired properties have demonstrated the presence of high-grade Keno-style silver-lead-zinc mineralization and are adjacent to, or contiguous with, Metallic Minerals’ Keno Silver property and the Keno Hill properties now owned by Hecla Mining following the completion of the acquisition of Alexco Resources (see Figure 1).
Acquisition Highlights
Nabob and Faro Claims – In the Keno Summit area, the Nabob claim hosts the Keno Hill “Main” vein and its numerous offshoots where drilling in 2012 returned impressive results (NA-12-02, 0.4 meters (m) of 4,090.6 grams per ton (g/t) Silver Equivalent (Ag Eq) (3,140 g/t Ag, 0.86 g/t Au, 22.37% Pb and 0.25% Cu), that led to high-grade surface mining of 65 tons of ore material over 4,200 g/t Ag (see Table 1)1. The Nabob Main vein was successfully targeted by two Metallic Minerals drill holes in its 2022 field program and assay results are pending.
Rage 1-3 Claims – The Rage claims cover the Rain and Shine target area where a typical Keno-style Ag-Pb-Zn vein has been sampled at surface and returned grades to 889.1 g/t Ag Eq in grab samples from the vein. The Rain and Shine mineralization appears to occur at the intersection of the Flame & Moth and Onek trends, which host 41.5 million ounces of silver (“Moz Ag”) and 4.3 Moz Ag respectively, in mineral reserves and M&I resources2. Well located regarding infrastructure, the Rage claims are crossed by the Bellekeno mine-to-mill haul road, only 600 meters from the Hecla Mill.
The Tveter-Pavlovich claims on the south side of Sourdough Hill, 500 meters from Hecla’s Bellekeno mine, is associated with extension of structures from the Bellekeno deposit which has produced 7.9 Moz Ag5 and hosts 4.75 Moz Ag in current reserves and M&I resources2. These potential extensions were tested by drilling at the Tveter-Pavlovich claim boundary in 2018 returning 3.3 m of 469.3 g/t Ag Eq (63.1 g/t Ag, 0.93% Pb, 0.92% Zn) including 0.2 m of 1,120.5 g/t Ag Eq (832.0 g/t Ag, 3.34%1)4. In addition to the Bellekeno vein extensions, historic exploration identified and exposed two additional vein occurrences with high-grade Ag-Pb-Zn and gold potential called the Mo vein showings on the property3.
Metallic Minerals President, Scott Petsel, stated, “We are very pleased to have been able to add these significant and very prospective properties in the high-grade Keno Hill silver district, and to immediately initiate drill testing of the Nabob vein as a historically drilled, potentially ‘resource-ready’ target.”
“Additionally, Metallic’s 171 km2 land position is the second largest in the prolific Keno Hill camp and now contains five ‘resource-ready’ advanced-stage targets, 11 ‘growth-stage’ targets with initial positive drilling and over 20 early-stage drill-ready targets with numerous additional untested soil anomalies of greater than 6.0 g/t Ag Eq., all in a district with over 100 years of mining history and over 300 million ounces of past silver production and current resources5. We are currently wrapping up our exploration program at the Keno Silver Project and we anticipate receiving initial results over the coming months from our core drilling and surface sampling programs including results from the Nabob target drilling.”
Keno District Alluvial Claims
In addition to the recently acquired hard-rock properties mentioned above, Metallic Minerals has been assembling, through acquisition and staking, a significant package of alluvial claims and leases in prospective areas in the Keno District. These claim groupings, including the Granite Creek East claims, the Allen/Faith Creek Claims and the Badger and Honey claims total over 20 miles of prospective alluvial deposits to explore and develop. Claims in the Granite Creek area have produced over 16,000 ounces of gold between 2015 and 2020 and gold production continues in multiple operations6. Metallic intends to pursue royalty agreements with known operators interested in alluvial claim development and production. A further update on Metallic’s alluvial claim and activities at both Keno and in the Klondike is expected in the coming weeks.
Upcoming Events
Metals Investor Forum – Metallic Minerals will be participating in the upcoming Metals Investor Forum in Vancouver on September 9-10, during which the Company will provide a live presentation with Q&A. For more information and to register click here.
Precious Metals Summit – Metallic Minerals will be attending the 2022 Precious Metals Summit in Beaver Creek, Colorado, where the Company will participate in 1-on-1 meetings with institutional investors and deliver a live presentation update. For more information and to register, click here.
Figure 1 – Keno Silver District Map Highlighting Metallic Minerals Property and New Acquisitions
Metallic Minerals Corp., Wednesday, September 7, 2022, Press release picture
Table 1 – Highlight Assay Results from Historic Drilling and Sampling at Recent Acquisition Targets
Target Area
DDH or Sample ID
Sample Type
From (m)
To (m)
Width (m)
Ag Eq (g/t)1
Ag (g/t)
Au (g/t)
Pb (%)
Zn (%)
Cu (%)
Rage
113362
Grab
–
–
–
565.3
56.8
0.03
0.22
10.54
0.03
Rage
113363
Grab
–
–
–
193.0
26.0
0.31
0.07
2.80
0.03
Rage
113364
Grab
–
–
–
660.4
198.0
4.51
0.40
0.10
0.14
Rage
10-06-LB
Grab
–
–
–
889.1
36.0
1.41
0.05
14.42
0.38
Rage
11-06-LB
Grab
–
–
–
301.5
263.0
0.22
0.38
0.07
Nil
Rage
RS-01-06
Grab
–
–
–
326.7
275.0
0.25
0.59
0.12
Nil
Rage
RS-02-06
Chip
–
–
–
259.3
28.0
0.01
0.05
4.87
Nil
Nabob2
NA-12-02
Core
21.24
24.64
3.4
637.5
466.5
0.12
4.06
0.08
0.01
Nabob2
Incl.
Core
21.24
21.64
0.4
4090.6
3140.0
0.86
22.37
0.25
0.09
Nabob2
NA-12-03
Core
22.5
23.7
1.2
292.5
169.7
0.13
2.69
0.15
0.01
Nabob2
NA-12-04
Core
16.76
17.76
1
236.7
122.0
0.07
2.33
0.40
0.01
Nabob2
NA-12-06
Core
20
20.75
0.75
240.4
200.0
0.13
0.60
0.09
0.01
Nabob2
NA-12-11
Core
4.75
5.55
0.8
1202.0
1019.0
0.29
3.60
0.28
0.05
Nabob2
NA-12-11
Core
16.1
16.7
0.6
251.6
172.0
0.05
1.56
0.27
0.03
Nabob2
NA-12-12
Core
7.05
8.25
1.2
1125.4
798.7
0.41
7.10
0.36
0.02
Nabob2
Incl.
Core
7.05
7.45
0.4
2951.9
2142.0
0.71
18.63
0.67
0.04
Nabob2
NA-12-13
Core
8.6
10.1
1.5
211.5
119.2
0.44
0.58
0.60
0.01
Nabob2
NA-12-14
Core
5.2
6.1
0.9
779.8
655.0
0.44
1.56
0.34
0.08
Nabob2
NA-12-15
Core
11.35
13.00
1.65
455.3
394.0
0.15
0.40
0.65
0.01
Tveter -Pavlovich3
K-18-0695
Core
285.3
289.5
4.15
83.8
33.9
0.01
0.82
0.38
–
incl.
Core
287.65
288
0.35
724.2
354.0
0.01
8.99
0.61
–
Tveter -Pavlovich3
K-18-0697
Core
230.5
233.8
3.3
469.3
63.1
0.01
0.93
0.92
–
Incl.
Core
230.5
230.7
0.2
1120.5
832.0
0.14
3.34
3.17
–
Table Notes: 1 – Silver equivalent (Ag Eq) values assume Ag $19/oz, Pb $1.05/lb, Zn $1.30/lb, Au $1,800/oz, Cu $3.00/lb and 100% metallurgical recovery. Sample intervals are based on measured drill intercept lengths. 2 – Historic Nabob drill samples were subject to highly selective sampling procedures for the purpose of evaluating high-grade mining opportunities and may not be representative of the entire mineralized widths of the Nabob vein system. 3 – Drilled by Alexco Resources at the Tveter-Pavlovich property boundary while the property was under option to Alexco Resources.
Nabob Target Area
The Nabob target, located in the Keno Summit target area, directly adjoins other holdings for Metallic. It was one of the original four claims filed on the Keno Summit discovery in 1919. The fact that it still has exposed high-grade Ag-Pb-Zn vein material, and in the 2010s saw 65 tons of very-high-grade silver production, emphasizes the overall prospectivity of this under-explored part of the district.
Hosted by the Nabob claim the “Main” vein and its transverse offshoots are exposed for 250 m on strike. Work completed in 2012 included rock sampling, trenching, geophysics and the drilling of 17 holes (490.7 m). As reported from the 2012 work, a bulk sample ran 1,618 g/t Ag, 18.5% Pb and 0.51 g/t Au underscoring the high-grade nature of the Nabob target1. After review of the available drill data and surface exposures, Metallic Minerals chose to drill two holes at the Nabob target in 2022 which have successfully encountered the vein structure and assay results are pending. The Nabob claim acquisition is accompanied by the equally prospective but undrilled Faro claim, also in the Keno Summit area. Together the claims enhance and expand Metallic’s holdings at the Keno Summit and add to the potential to rapidly develop a resource for the target area.
2022 Drill set up at the Nabob target
Rain and Shine (Rage 1-3) Target Area
The Rage claims, vended with the Nabob and Faro claims, host the Rain and Shine Ag-Pb-Zn-Au vein target. Mineralization at Rain and Shine is exposed at surface and has been sampled by Metallic Minerals returning substantial grades in grab sampling (see Table 1). The proximity of the Rain and Shine target to existing infrastructure, including Hecla’s operating mill and the Bellekeno haul road as well as being 750 m from underground developments at Hecla’s Flame & Moth mine (41.5 million silver ounces of combined reserves and M&I resources2), bode well for its exploration and development prospects. Mineralization at Rain and Shine is known to have occasional high grade gold numbers associated with the typical Ag-Pb-Zn mineralization and the exposed vein system is parallel to, and similar in style and mineralogy to the vein system being mined at the Flame & Moth. The Rain and Shine is a drill-ready target that Metallic will evaluate for drilling in 2023.
Tveter-Pavlovich Target Area
Consisting of 23 quartz mineral claims (Mo 1-8, Caroline 1-2, Rex 1-2, Boso 1-5, Casy 1-3, Bonny, Chrissie G and the Windy 1), the Tveter-Pavlovich claim block was optioned by Alexco Resources in 2017 with four holes drilled to test the extension of veins in the hanging wall of the Bellekeno 48 vein in the Bellekeno mine. Two of these drill holes encountered significant mineralization up to 1,120.5 g/t Ag Eq (see Table 1) with mineralization open to expansion with follow-up drilling.
Mineralization also outcrops on the Tveter-Pavlovich claims at the Mo target where historic trenching, dozing, shafting and the driving of an adit have exposed two parallel veins with select high-grade sample assays up to 9,771 g/t Ag, 80.5% Pb and 1.7 g/t Au3. Additionally, trenching in 1980 is reported to have exposed a segment of the Mo vein which ran up to 13,719 g/t Ag.
About Metallic Minerals
Metallic Minerals Corp. is an exploration and development stage company, focused on silver, gold and copper in the high-grade Keno Hill and La Plata mining districts of North America. Our objective is to create shareholder value through a systematic, entrepreneurial approach to making exploration discoveries, growing resources and advancing projects toward development. Metallic Minerals has consolidated the second-largest land position in the historic Keno Hill silver district of Canada’s Yukon Territory, directly adjacent Hecla Mining’s operations, with more than 300 million ounces of high-grade silver in past production and current M&I resources. Hecla Mining Company, the largest primary silver producer in the USA and third largest in the world, completed the acquisition of Alexco in September 2022. Metallic recently announced the inaugural NI 43-101 mineral resource estimate for its La Plata silver-gold-copper project in southwestern Colorado. The Company also continues to add new production royalty leases on its holdings in the Klondike gold district in the Yukon. All three districts have seen significant mineral production and have existing infrastructure, including power and road access. Metallic Minerals is led by a team with a track record of discovery and exploration success on several major precious and base metal deposits, as well as having large-scale development, permitting and project financing expertise.
About the Metallic Group of Companies
The Metallic Group is a collaboration of leading precious and base metals exploration and development companies, with a portfolio of large, brownfields assets in established mining districts adjacent to some of the industry’s highest-grade producers of silver and gold, platinum and palladium, and copper. Member companies include Metallic Minerals in the Yukon’s high-grade Keno Hill silver district and La Plata silver-gold-copper district of Colorado, Granite Creek Copper in the Yukon’s Minto copper district, and Stillwater Critical Minerals in the Stillwater PGE-nickel-copper district of Montana and Kluane district in the Yukon. The founders and team members of the Metallic Group include highly successful explorationists formerly with some of the industry’s leading explorer/developers and major producers. With this expertise, the companies are undertaking a systematic approach to exploration and development using new models and technologies to facilitate discoveries in these proven, but under-explored, mining districts. Members of the Metallic Group have been recognized as recipients of awards for excellence in environmental stewardship demonstrating commitment to responsible resource development and appropriate ESG practices. The Metallic Group is headquartered in Vancouver, BC, Canada, and its member companies are listed on the Toronto Venture, US OTCQB and Frankfurt stock exchanges.
Footnotes
Blackburn, L. R., Assessment Report, Nabob Project, Keno Hill Yukon Territory, Canada, Keno Hill Exploration Corp., Yukon, 2014
Alexco Resource Corp Technical Report, titled “NI 43-101 Technical Report on Updated Mineral Resource and Reserve Estimate of the Keno Hill Silver District” with an effective date of April 1, 2021 and issue date of May 26, 2021.
Yukon MINFILE – Mineral Occurrence 105M 013 – Version 2004-1. Yukon Geological Survey, Energy, Mines and Resources, Yukon Government, 2004.
Stammers, et al., Assessment Report, 2018 Pavlovich Option Sourdough Hill, Alexco Resources, Yukon, 2019.
Cathro, R. J., Great Mining Camps of Canada 1. The History and Geology of the Keno Hill Silver Camp, Yukon Territory. Geoscience Canada, Sept. 2006. ISSN 1911-4850.
Steinke, et al., Public Presentation, Placer Gold Settings in an Alpine Glaciated Environment, Granite Creek, Yukon, Placer Forum 2022.
References to adjoining properties are for illustrative purposes only and are not necessarily indicative of the exploration potential, extent or nature of mineralization or potential future results of the Company’s projects.
The disclosure in this news release of scientific and technical information regarding exploration projects on Metallic Minerals’ mineral properties has been reviewed and approved by Scott Petsel, P.Geo., President, who is a Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”).
Forward-Looking Statements
This news release includes certain statements that may be deemed “forward-looking statements”. All statements in this release, other than statements of historical facts including, without limitation, statements regarding potential mineralization, historic production, estimation of mineral resources, the realization of mineral resource estimates, interpretation of prior exploration and potential exploration results, the timing and success of exploration activities generally, the timing and results of future resource estimates, permitting time lines, metal prices and currency exchange rates, availability of capital, government regulation of exploration operations, environmental risks, reclamation, title, and future plans and objectives of the company are forward-looking statements that involve various risks and uncertainties. Although Metallic Minerals believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the companies with securities regulators. Readers are cautioned that mineral resources that are not mineral reserves do not have demonstrated economic viability. Mineral exploration and development of mines is an inherently risky business. Accordingly, the actual events may differ materially from those projected in the forward-looking statements. For more information on Group Ten and the risks and challenges of their businesses, investors should review their annual filings that are available at www.sedar.com
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Vancouver, British Columbia–(Newsfile Corp. – September 6, 2022) – Riverside Resources Inc.(TSXV: RRI) (OTCQB: RVSDF) (FSE: 5YY) (“Riverside” or the “Company”), is pleased to report that the BHP – Riverside Exploration Funding Agreement (“EFA”) will be extended into a fourth year. Building on the past three years of BHP fully funded generative exploration work, the EFA will move into the next exploration phase focusing on five copper projects in Sonora, Mexico (see Figure 1) with a currently approved US$1,100,000 in exploration funding to work on the Llano de Nogal district and US$500,000 in ongoing High Value Work programs in the Sonora Projects for a total so far allocated budget of US$1,600,000 exploration work on the specified properties in the EFA.
The approved next phase of work focuses toward property specific funding to advance the current priority projects with derisking exploration, geophysics, geology, geochemistry, mineral titles, and other related mineral exploration aspects to progress towards drilling and drill decisions. Additional expanded budgets for drilling will be added as projects are moved forward to the Operational Phase for the BHP -Riverside EFA. To that effect, Riverside has experience in all aspects of the upcoming work, as Riverside has managed this successfully in earlier exploration alliances with Kinross Gold, Antofagasta, Cliffs, and Hochschild among others.
Riverside’s President and CEO, John-Mark Staude, commented: “We are pleased to see our partnership with BHP progress from the generative phase into more focused exploration work across the portfolio of projects we’ve acquired and advanced to-date. Now that our partnership with BHP is focusing on a priority group of copper projects, the extensive data, relationships and additional targets we’ve generated within the broader EFA area can also be leveraged and pursued by Riverside. The solid funding support by BHP builds beyond Riverside’s strong balance sheet and other projects. The Company owns and anticipates catalysts in the coming quarter.“
This exploration program is coordinating with the technical teams from BHP and Riverside Resources to work together towards programs which are jointly defined by both companies, while Riverside continues to be the EFA Operator. The five projects that are moving forward are called collectively the “Sonora Projects”. BHP and Riverside will progress the Sonora Projects exploration for large Tier 1 scale porphyry Cu targets and work toward drilling where the majority ownership and funds from BHP could earn a minimum of 80%. Once any of the Sonora Projects are named a Designated Project and moved to the Operational Phase, the partnership continues through a funding by BHP of at least $4M into each project, as outlined in earlier news releases, with Riverside retaining an NSR on projects, should BHP earn an interest and Riverside does not choose to continue as JV partner.
BHP and Riverside will now focus the EFA on Sonora Projects with additional funding to be fully funded by BHP for this fourth year, with emphasizing on drill targeting, permitting, preparation for future drill testing of identified assets and expand on the work programs of the five projects noted below.
The Technical Committee, comprised of both BHP and Riverside personnel, reviewed and visited prospective areas in Sonora, identified during the Generation Phase of the EFA, and singled out a portfolio of five priority copper projects, which are inside of two reduced focused zones and specific property boundaries.
Figure 1: Progressing five projects inside of two focused areas for the BHP – Riverside funded work extended EFA.
Additionally, with the thorough evaluations completed by the BHP – Riverside EFA, the Company and BHP now hold a comprehensive and unique data set on Sonora’s porphyry copper potential. Certain prospective target areas were not selected within the EFA framework for various reasons but still have significant potential to host large copper deposits, and both parties can now pursue these opportunities themselves. Moreover, Riverside is also working up four Additional Properties that are mutually agreed for BHP to consider and could be added to the Sonora Projects. These additional properties have yet to reach an on-going funding decision and if not, then may become part of the going forward target ideas that Riverside could pursue as well as the larger exploration region in the coming months.
Options Grant
On September 2nd, 2022 the Company granted 1,000,000 incentive stock options (the “Options”) to Directors, Officers and Consultants of the Company. The Options are exercisable at $0.13 per share for a period of 5 years from the date of grant. Options granted to individuals in their capacity as a Director vest in 3 equal instalments over 18 months and Options granted to Officers and Consultants vest in 4 equal instalments over 12 months. The Options were granted pursuant to the Company’s shareholder-approved stock option plan and are subject to the policies of the TSX Venture Exchange and any applicable regulatory hold periods.
About Riverside Resources Inc.:
Riverside is a well-funded exploration company driven by value generation and discovery. The Company has over $4M in cash, no debt and less than 75M shares outstanding with a strong portfolio of gold-silver and copper assets and royalties in North America. Riverside has extensive experience and knowledge operating in Mexico and Canada and leverages its large database to generate a portfolio of prospective mineral properties. In addition to Riverside’s own exploration spending, the Company also strives to diversify risk by securing joint-venture and spin-out partnerships to advance multiple assets simultaneously and create more chances for discovery. Riverside has properties available for option, with information available on the Company’s website at www.rivres.com.
ON BEHALF OF RIVERSIDE RESOURCES INC.
“John-Mark Staude”
Dr. John-Mark Staude, President & CEO
For additional information contact:
John-Mark Staude President, CEO Riverside Resources Inc. info@rivres.com Phone: (778) 327-6671 Fax: (778) 327-6675 Web: www.rivres.com
Certain statements in this press release may be considered forward-looking information. These statements can be identified by the use of forward-looking terminology (e.g., “expect”,” estimates”, “intends”, “anticipates”, “believes”, “plans”). Such information involves known and unknown risks — including the availability of funds, the results of financing and exploration activities, the interpretation of exploration results and other geological data, or unanticipated costs and expenses and other risks identified by Riverside in its public securities filings that may cause actual events to differ materially from current expectations. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
By 2025, the metals could be priced at $15,000 a tonne (U$6.80 per pound), a rise of 66%. (current copper price is $9,300 per tonne (U$4.24 per pound)) Goldman said in a report titled “Copper is the new Oil”
The report also drills down into three drivers of green copper demand: electric vehicles (EVs); solar power and wind power. The bank estimates that 5.1 million EVs likely will be sold in 2021, rising to 31.51 million EVs in the year 2030. It also forecasts that 30 million charging units will be installed in 2030.
A rising tide of electrification, as many countries seek to lower their emissions through developing new technologies, promises robust demand for years to come. Global copper production would need to rise by between 3% and 6% per annum by 2030 for countries to meet the targets of the Paris Agreement on climate change, according to a Sept. 14 Bernstein Research note.
Joining us for a conversation is Judson Culter the CEO of Rover Metals to discuss the company’s newest project acquisition, the Indian Mountain Lake Project, representing approximately 30,000 acres of greenstone belt, that will offer shareholders exposure to critical minerals – Zinc, Lead, Silver, and Copper.
0:00 Introduction 0:35 Rover Metals Company Overview 1:00 Indian Mountain Lake – Critical Minerals Project (Brownfields) 3:13 (3%) Blue Sky Potential 4:07 New Flagship – Zinc, Lead, Silver, Copper 5:43 Genetic Model 7:46 Infrastructure 10:18 Goals this year on the Indian Mountain Lake Project 11:42 Exploration Work – Twin and or Step Out Drilling 12:57 News flow for the 2022 14:55 Capital Structure 15:23 Message for Shareholders 17:06 What did I forget to ask
Rover Metals has an option to own a 90% interest in the Indian Mountain Lake Volcanic Massive Sulphide project, NT, Canada. The Indian Mountain Lake Project is the Company’s first district scale land package, representing approximately 30,000 acres of greenstone belt. The project has a historical Zinc-Copper-Lead-Silver geological resource. The Indian Mountain Lake VMS Project has had exploration dating back to the 1940s and has a historical resource spread across four zones on the project. The BB Zone and Kennedy Lake Zone have a combined historic resource of 1,400,000 tons grading 10% combined zinc and lead with 3.5 OPT (ounces per ton) of silver. Approximately 900 metres west of the BB Zone, the Kennedy Lake West Zone has a historic resource of 610,000 tons grading 1.15% copper. About 8 km southeast of the BB Zone, the Susu Lake Zone, has a historical resource consisting of 142,500 tons grading 0.95% copper*.
The property is located approximately 195 km east-northeast of Yellowknife, NT, off the eastern arm of Great Slave Lake. Seasonal access relies upon fixed or rotor wing support. A right of way was cleared to the project from Thompson Landing in the 1970’s. If this right of way were to be brushed out it would provide barge access at Thompson Landing, from Yellowknife, with ground transportation, considerably lowering any logistical costs. Future Government of Canada federally funded hydro-energy infrastructure could come close to the project if the Taltson Hydro Dam expansion proceeds through the eastern arm of Great Slave Lake into Yellowknife. At the southwest-end of Great Slave Lake, Osisko Metals is gearing up to reopen the Pine Point Zinc-Lead Mine. At nearby Hay River, NT, there is a rail line to the Teck Resources Zinc Refinery in Trail, BC.
*These resources are historic in nature. Further drilling is needed to bring them up to CIM Definition Standards. The historic data has not been verified by Rover. The historic information is provided in the 2103 Assessment Report for Indian Mountain Lake which is in public record with the Government of the Northwest Territories. Technical information has been approved by Gary Vivian, M.Sc., P.Geo., QP for the purposes of NI 43-101.
The Company’s management believes that the Indian Mountain Lake VMS Project has the potential to be a Tier 1 Zinc and Copper project. The historical resource represents only 3% of the total land package. The blue sky on the remaining 97% of the greenstone belt is: (1) for additional zinc resources and (2) a significant new copper discovery. Historical workings also document the presence of copper-gold skarn systems. The historic zones are open along strike and below a vertical depth of 150 meters.
In Canada, Zinc and Copper are on the Federal Government’s Critical Minerals List, and part of the Canadian Government’s Critical Minerals Strategy. As a result, the project qualifies for the 30% critical mineral flow-through investor tax credit. Zinc-Copper-Lead-Silver are also on the U.S. Critical Minerals List.
Metals trades under the symbol “ROVR” on the TSXV. Rover also obtained a public co-listing of its securities on the OTCQB on January 17, 2019 (OTCQB: ROVMF), and on the Frankfurt Stock Exchange on February 1, 2021 (FRA: 4XO).
On August 9, 2018, Rover Metals acquired a 100% interest in the Cabin Lake Property completing its area play for the Cabin Lake Group of Gold Projects. The Cabin Lake Group of Gold Projects are located 110 km northwest of Yellowknife and 20 km southeast of Fortune Minerals’ NICO Project and close to the new Tlicho All Season Road. The properties hosts high-grade gold in iron formation in archean metasedimentary.
On September 9, 2016, Rover Metals Optioned up to a 100% interest in the Up Town Gold Property. The Up Town Gold Property is a high grade Archean lode gold prospect adjoining the Giant Mine in Yellowknife, Northwest Territories. The Property consists of 6 claims covering 3,227 hectares and borders the west side of the Giant Mine leases. The Property centre is approximately 6 km north from downtown Yellowknife, and adjoins Gold Terra’s Northbelt claims.
Proven and Probable Where we deliver Mining Insights & Bullion Sales. I’m a licensed broker for Miles Franklin Precious Metals Investments, where we provide unlimited options to expand your precious metals portfolio, from physical delivery, offshore depositories, and precious metals IRA’s. Call me directly at (855) 505-1900 or you may email maurice@milesfranklin.com.
Proven and Probable provides insights on mining companies, junior miners, gold mining stocks, uranium, silver, platinum, zinc & copper mining stocks, silver and gold bullion in Canada, the US, Australia, and beyond.
Vancouver, British Columbia–(Newsfile Corp. – September 2, 2022) – EMX Royalty Corporation (NYSE American: EMX) (TSXV: EMX) (FSE: 6E9) (the “Company” or “EMX”) is pleased to announce it has executed a purchase and sale agreement (the “Agreement”) for a portfolio of royalties, with Pediment Gold LLC, a wholly-owned subsidiary of Nevada Exploration Inc. (“NGE”) for $500,000. The portfolio consists of a 2% NSR royalty on NGE’s Nevada gold exploration portfolio covering ~62.5 square miles in Nevada and includes four district-scale land positions as well as certain other interests. In addition, if NGE options, farms out, or sells a project, beginning on the first anniversary of the third-party agreement, EMX will receive annual advanced royalty payments (“AAR”) of $20,000 that escalate $10,000 per year and are capped at $50,000. NGE has the right to buy back half of EMX’s 2% NSR by purchasing a 0.5% NSR interest for $1,000,000 anytime prior to the 7th anniversary of the Agreement and then, if the first NSR interest is purchased, purchasing the second 0.5% NSR interest anytime prior to production for $1,500,000.
Discussion of the Portfolio. NGE’s portfolio covers approximately 62.5 square miles of prospective mineral rights in Nevada and targets both Carlin and epithermal precious metal mineralization. NGE has advanced these projects from initial targeting, using NGE’s in-house ground water sampling programs and databases, and property acquisition through the collection of various geophysical datasets, geologic mapping, further bore-hole ground water sampling and in several cases, drill defined geologic orientation studies to further refine targets undercover. The portfolio was built over a decade with more than $10,000,000 spent in exploration advancing the projects. EMX’s royalty footprints cover these key tracks of ground and provides exceptional exploration and royalty upside.
Qualified Person. Michael P. Sheehan, CPG, a Qualified Person as defined by NI 43-101 and employee of the Company, has reviewed, verified and approved the above technical disclosure.
About EMX. EMX is a precious, base and battery metals royalty company. EMX’s investors are provided with discovery, development, and commodity price optionality, while limiting exposure to risks inherent to operating companies. The Company’s common shares are listed on the NYSE American Exchange and TSX Venture Exchange under the symbol “EMX”, and also trade on the Frankfurt exchange under the symbol “6E9”. Please see www.EMXroyalty.com for more information.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release
Forward-Looking Statements
This news release may contain “forward-looking statements” that reflect the Company’s current expectations and projections about its future results. These forward-looking statements may include statements regarding perceived merit of properties, exploration results and budgets, mineral reserves and resource estimates, work programs, capital expenditures, timelines, strategic plans, market prices for precious and base metal, or other statements that are not statements of fact. When used in this news release, words such as “estimate,” “intend,” “expect,” “anticipate,” “will”, “believe”, “potential” and similar expressions are intended to identify forward-looking statements, which, by their very nature, are not guarantees of the Company’s future operational or financial performance, and are subject to risks and uncertainties and other factors that could cause the Company’s actual results, performance, prospects or opportunities to differ materially from those expressed in, or implied by, these forward-looking statements. These risks, uncertainties and factors may include, but are not limited to unavailability of financing, failure to identify commercially viable mineral reserves, fluctuations in the market valuation for commodities, difficulties in obtaining required approvals for the development of a mineral project, increased regulatory compliance costs, expectations of project funding by joint venture partners and other factors.
Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this news release or as of the date otherwise specifically indicated herein. Due to risks and uncertainties, including the risks and uncertainties identified in this news release, and other risk factors and forward-looking statements listed in the Company’s MD&A for the quarter ended June 30, 2022 (the “MD&A”), and themost recently filed Annual Information Form (“AIF”) for the year ended December 31, 2021, actual events may differ materially from current expectations. More information about the Company, including the MD&A, the AIF and financial statements of the Company, is available on SEDAR at www.sedar.com and on the SEC’s EDGAR website at www.sec.gov.
