Categories
Base Metals Collective Mining Junior Mining Precious Metals

Collective Mining Discovers a New High-Grade Zone at the Breccia to Porphyry Contact by Drilling 104.8 Metres Grading 5.56 g/t Gold Equivalent from Surface at Apollo

  • Two reconnaissance holes were drilled eastwards from Pad 6 at the Apollo system to test the potential for high grade mineralization at the eastern contact zone where the inter-mineral breccia and the host porphyry vein stockwork meet. Based on prior observations, the concept to be proved was that the contact zone forms a trap for the accumulation of excess metal driven by the location where the late-stage carbonate base metal veins enter the system. The scout hole, APC-41, was drilled obliquely to the contact and was not optimally situated to fully test the zone. Based on the logging of that hole, APC-42 was then appropriately drilled orthogonal to the contact zone.
  • APC-42, which expanded the overall dimensions of the Apollo system modestly to the southwest intersected high-grade gold-silver-copper mineralization from surface over a broad interval with the highest accumulation (grams X metres) of oxide material encountered to date as follows:
  • APC-41, which was drilled at a suboptimal angle, also intercepted high-grade mineralization from surface with a robust oxide zone as follows:
  • Six additional holes have been completed at the Apollo system with assay results expected in the near term. All six holes intersected cumulative mineralization over varying yet significant downhole drill lengths. Three drill rigs are operating on site with a fourth rig expected to begin operating prior the end of Q2, 2023.

Ari Sussman, Executive Chairman commented: “This new step-out drilling into the eastern area of the Apollo system has outlined a new and important high-grade zone where extensive quartz stockwork veining has resulted in an abundance of high-grade metal being trapped at the interface between breccia and porphyry. A drill hole from Pad 10, located northeast from Pad 6, is underway to test this new high-grade zone along the contact to the northeast. The surprises at Apollo continue to be positive and I am confident that not only will the Apollo porphyry system continue to grow with further exploratory drilling but that we will make new discoveries in the near term by remaining aggressive with our drilling.”

TORONTO, April 25, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from a further two drill holes completed within the Apollo porphyry system (“Apollo”) at the Guayabales project located in Caldas, Colombia. Apollo is a high-grade, bulk tonnage copper-silver-gold system, which owes its excellent metal endowment to an older copper-silver and gold porphyry system being overprinted by younger precious metal rich, carbonate base metal vein systems (intermediate sulphidation porphyry veins) within a magmatic, hydrothermal inter-mineral breccia body currently measuring 395 metres x 385 metres x 915 metres and open for expansion.

To watch a short video of David Reading, Special Advisor to Collective Mining, speak about the assay results announced today, please click here.

Details (See Table 1 and Figures 1-4)

The Phase II drilling program of 2023 is advancing on schedule with thirteen holes completed and results announced. A further six holes have been drilled and await assay results from the lab. The objectives of the 2023 program is to define the high-grade mineralization and dimensions of the Apollo porphyry system near surface, expand the size of the system through step-out and directional drilling and drill test multiple new targets generated through grassroot exploration. Since the announcement of the discovery hole at Apollo in June 2022, a total of 44 drill holes (approximately 18,400 metres) have been completed and assayed.

This press release announces results from two exploratory holes drilled eastwards from Pad 6 and designed to test the contact zone between the porphyry and inter-mineral breccia. The first hole, APC-41, was drilled to the northeast at a shallow angle and was suboptimal in design as it was drilled oblique to the contact zone. Based on the understanding gained from the first hole, APC-42 was drilled steeply due east and intercepted the contact zone at an orthogonal angle. Assay results and geological observations for both holes are summarized below:

APC-42 was drilled steeply to the east  from surface at Pad 6 to a maximum downhole depth of 126.3 metres. The mineralized interval includes 44.55 metres of combined saprolite and saprock with iron oxides formed from the oxidation of the sulphides hosted within the matrix of the breccia and within veins. Below the oxidized zone, the intercept passes into fresh rock with a sulphide composition of 0.5% chalcopyrite, 1.5% pyrite and pyrrhotite (up to 0.5%). One of the characteristic features of this intercept is the fact that it passes through a contact zone between breccia and porphyry. This zone contains both mineralized breccia and a stockwork of sulphide bearing quartz and carbonate veins within the adjacent porphyry material, all of which are associated with intense sericite alteration. Finally, the footwall zone of the porphyry is well altered and hosts mineralization associated with disseminated pyrite and quartz-pyrite veins with assay results as follows:

  • 104.8 metres @ 5.56 g/t gold equivalent (consisting of 4.21 g/t gold, 68 g/t silver and 0.3% copper) including:

This intercept is followed by 19.35 metres @ 0.33 g/t gold equivalent from 106.95 metres downhole and is hosted within quartz diorite porphyry.

APC-41 was drilled to the northeast from Pad 6 to a maximum downhole depth of 162.4 metres and was designed to test the contact zone between breccia and porphyry. The mineralized interval starts at 1.65 metres depth below the overburden and intersects 28.05 metres of combined saprolite and saprock with iron oxides formed from the oxidation of the sulphides hosted within the matrix of the breccia and within veins. Below the oxide zone, the intercept passes into fresh rock consisting of quartz diorite breccia with a matrix of chalcopyrite (0.2%), pyrite (up to 2%) and 0.1% pyrrhotite before exiting the breccia and entering into mineralized quartz diorite porphyry. As in APC-42, the contact zone is characterized by a stockwork of sulphide bearing quartz and carbonate, porphyry veins associated with intense sericite alteration. The sericite is overprinting earlier potassium alteration (biotite). Finally, the footwall porphyry is altered and hosts mineralization associated with disseminated pyrite and quartz-pyrite veins with assay results as follows:

  • 82.1 metres @ 3.09 g/t gold equivalent (consisting of 2.81 g/t gold, 13 g/t silver and 0.1% copper) including:

This intercept is followed by a lower grade intercept of 57 metres @ 0.34 g/t gold equivalent from 83.7 metres downhole and is hosted within quartz diorite porphyry.

Six additional holes have been completed at the Apollo system with assay results expected in the near term. All holes intersected bulk tonnage mineralization over core length of up to more than 500 metres.  APC-45 and APC-48 were shorter holes drilled from Pad 7, designed to test the contact zone between the inter-mineral breccia and porphyry host rock in the southern portion of the deposit. APC-44 and APC-46 were longer holes drilled from Pad 6 as part of the fan pattern of drilling to assess the shallow mineralization in the central area of the system. APC-49 was a deeper hole drilled to the northwest from Pad 6 and APC-47 was drilled eastwards from Pad 4.

The Company presently has three diamond drill rigs operating at the Apollo project with a fourth rig expected to begin operating prior to the end of Q2, 2023. Additional assay results are expected in the near term.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers a 1,000 metres X 1,200 metres area, and represents a large and unusually high-grade Cu-Ag-Au porphyry system. Mineralizations styles include early-stage porphyry veins, inter-mineral breccia mineralization and multiple zones of porphyry related late stage, sheeted, carbonate-base metal veins with high gold and silver grades. The Apollo target area is still expanding as the Company’s geologists have found multiple additional outcrop areas with porphyry veining, breccia, and late stage, sheeted, carbonate base metal veins.

Table 1: Assay Results

Hole #From(am)To(am)InterceptInterval
(am)		Au(g/t)Ag(g/t)Cu%MO%Sauté(g/t)*Cue(%)*Zone
APC-411.6583.7082.052.81130.100.0023.091.65Interlinearly
Breccia
Inc**1.6529.7028.053.44150.070.0013.67Oxidation
zone
83.70140.7057.000.2430.34Porphyry
Host Rock
APC-420.00104.80104.804.21680.300.0015.562.97Interlinearly
Breccia
Inc**0.0044.5544.556.48370.100.0016.99Oxidation
zone
84.80104.8020.006.26240.100.0026.59Interlinearly
Breccia
APC-42106.95126.3019.350.2630.33Porphyry
Host Rock
*Sauté (g/t) is calculated as follows: (Au (g/t) x 0.97) + (Ag g/t x 0.016 x 0.88) + (Cu (%) x 1.87 x 0.90)+ (MO (%)*11.43 x 0.85) and Cue (%) is calculated as follows: (Cu (%) x 0.90) + (Au (g/t) x 0.51 x 0.97) + (Ag (g/t) x 0.009 x 0.88)+ (MO(%)x 6.10 x 0.85) utilizing metal prices of Cu – US$4.10/lb, Ag – $24/oz MO – US$25.00/lb and Au – US$1,500/oz and recovery rates of 97% for Au, 88% for Ag, 85% for MO, and 90% for Cu. Recovery rate assumptions are speculative as limited metallurgical work has been completed to date. A 0.2 g/t Sauté cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.
(**) Zone of Oxidation
Figure 1: Plan View of Drilling Highlighting Assay Results of APC-41 and APC-42 (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View of Drilling Highlighting Assay Results of APC-41 and APC-42 (CNW Group/Collective Mining Ltd.)
Figure 2: Core Photo Highlights from Drill Hole APC-41 (CNW Group/Collective Mining Ltd.)
Figure 2: Core Photo Highlights from Drill Hole APC-41 (CNW Group/Collective Mining Ltd.)
Figure 3: Core Photo Highlights from Drill Hole APC-42 (CNW Group/Collective Mining Ltd.)
Figure 3: Core Photo Highlights from Drill Hole APC-42 (CNW Group/Collective Mining Ltd.)
Figure 4: Plan View of the Guayabales Project Highlighting the Apollo Target Area (CNW Group/Collective Mining Ltd.)
Figure 4: Plan View of the Guayabales Project Highlighting the Apollo Target Area (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Fijian Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver, and gold exploration company with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper-silver-gold Apollo porphyry system. The Company’s near-term objective is to drill the shallow portion of the porphyry system while continuing to expand the overall dimensions of the system, which remains open in all directions.

Management, insiders and close family and friends own nearly 45% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (AP) and NI43-101 Disclosure

David Jo Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MS in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SE).

Technical Information

Rock, soils and core samples have been prepared and analyzed at SS laboratory facilities in Medallion, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QUA/AC program.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski73) and Collective Mining (@CollectiveMini1) on Twitter.

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

Collective Mining Logo (CNW Group/Collective Mining Ltd.)
Collective Mining Logo (CNW Group/Collective Mining Ltd.)

SOURCE Collective Mining Ltd.

Categories
Dolly Varden Silver Energy Junior Mining Precious Metals Uncategorized

Dolly Varden Silver Mobilizes Five Drill Rigs and Outlines Discovery-Oriented 45,000 Meter Drill Program

Vancouver, British Columbia–(Newsfile Corp. – April 24, 2023) – Dolly Varden Silver Corporation (TSXV: DV) (OTCQX: DOLLF) (the “Company” or “Dolly Varden“) announces the 2023 Exploration Plans for the Kitsault Valley Project, which includes the Dolly Varden Silver property and Homestake Ridge Gold Silver property. A total of 40,000 to 45,000m of drilling is planned to build upon last year’s successes through further step outs following high grade silver and gold mineralization at the Wolf and Homestake Ridge deposits, as well as appropriately spaced exploration holes to allow the inclusion of new mineralization drilled over the past three drilling programs to be include in an updated Mineral Resource Estimate.

“2022 was a breakthrough exploration season at Dolly Varden Silver’s Kitsault Valley project. It hosts one of the largest, undeveloped high grade precious metals project in Western Canada. With the wide, high-grade silver intercepts in significant step-out holes from the Wolf and Homestake Silver deposits, coupled with the highest grade gold intercepts drilled in all of the Golden Triangle in 2022 from the Homestake Main deposit, we eagerly await the start of this season’s drilling. We are continuing our successful strategy of expanding current Resources, while also testing new exploration targets for discovery. The company has over $26 million in the treasury, positioning our exploration team with a tremendous opportunity to create value with the drill bit,” said Shawn Khunkhun, President and CEO of Dolly Varden Silver.

Figure 1. Kitsault Valley trend with 2023 exploration drilling targets

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1728/163488_7c088258f4c53a63_002full.jpg

Dolly Varden: Wolf and Kitsol Veins

Drilling allocated to the Wolf Deposit expansion will focus on both infill drilling of the wide-spaced intercepts from 2022 to be included in an upcoming resource estimate, as well as further step out holes in both the southwest, north and east directions where high grade silver mineralization remains open. Two intercepts from the Wolf Vein drilled in 2022 at the furthest strike extents of the vein, are approximately 825 meters apart. The deposit is wide open for expansion along strike and to depth.

  • Wolf Vein furthest Northeast: DV22-329: 1,499 g/t Ag, 1.89 %Pb, 0.46% Zn over 15.94 meters (8.77 meters estimated true width), including 23,997 g/t Ag, 1.24% Pb, 0.34% Zn over 0.35 meters (0.19m estimated true width).
  • Wolf Vein furthest Southwest: DV22-320: 321g/t Ag, 0.84 %Pb, 0.84% Zn over 12.85 meters (6.81 meters estimated true width) including 664 g/t Ag, 1.24% Pb, 3.54% Zn over 1.63 meters (0.86 meters estimated true width).

Figure 2. Wolf Vein Long Section outlining 2023 exploration drill targets

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1728/163488_dollyvardenimage2.jpg

Similar step out drilling will follow up on high grade silver mineralization at the Kitsol Vein, where drill hole DV22-323 demonstrated the continuity of steeply plunging, high-grade silver mineralization with results of 301g/t Ag, 0.23 %Pb, 0.56% Zn over 15.00 meters (9.60 meters estimated true width) including 434 g/t Ag, 0.41% Pb, 0.69% Zn over 5.90 meters (3.78 meters estimated true width).

Homestake Ridge: Main and Silver

The 2023 exploration drilling at the Homestake deposits are influenced by the structural information gained from the infill drilling at Main where two main plunge directions have been identified; a shallow, northerly plunge and a steep southerly plunge, where NE-SW structures crosscut the main Homestake trend. The planned drilling will target the down plunge extensions of higher grade and wider zones of gold mineralization such as 2022 drill hole HR22-333 which intersected 46.31 g/t Au, 70 g/t Ag and 0.19% Cu over 25.00 meters including 1,145 g/t Au, 826 g/t Ag and 0.51% Cu over 0.48 meters core length.

Figure 3. Homestake Ridge Long Section outlining 2023 exploration drill target

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1728/163488_7c088258f4c53a63_004full.jpg

Drilling at Homestake Silver will prioritize step out holes where 2022 expansion drilling had success at the southern extent, with HR22-362, a 200 meter step out that intersected 1,252 g/t Ag, 0.81 g/t Au and 0.14% Cu over 2.50 meters, including 3,330 g/t Ag, 0.75 g/t Au and 0.38% Cu over 0.75m.

Discovery Focused Exploration

The Moose Vein is a 2023 exploration drill target, testing an historic prospect with small exploration adit from the 1920s. It is located 1,500 meters north of the Wolf Deposit within the Potassic alteration halo associated with the Torbrit, Dolly Varden and Wolf silver deposits to the south. The Moose vein strikes east-west, similar to the Dolly Varden Vein, hosting silver grades and mineralization styles similar to areas of the Wolf vein, proximal to the high-grade plunge zone. The depth extent and projected extension of the Mooise Vein under the mid-valley sediment cap will be tested in the 2023 program.

Several blind drill targets under the 5.4 kilometer long mid-valley sediment cover will be better defined for later summer drill testing, after a planned ground IP survey is completed

Additional exploration targets will include parallel structural zones to the west of Homestake Main trend, coincident with a broad gold in soils anomalous zone overlying a quartz-sericite-pyrite alteration zone.

Qualified Person

Rob van Egmond, P.Geo. Vice-President Exploration for Dolly Varden Silver, the “Qualified Person” as defined by NI43-101 has reviewed, validated and approved the scientific and technical information contained in this news release and supervises the ongoing exploration program at the Dolly Varden Project.

About Dolly Varden Silver Corporation

Dolly Varden Silver Corporation is a mineral exploration company focused on advancing its 100% held Kitsault Valley Project (which combines the Dolly Varden Project and the Homestake Ridge Project) located in the Golden Triangle of British Columbia, Canada, 25kms by road to tide water. The 163 sq. km. project hosts the high-grade silver and gold resources of Dolly Varden and Homestake Ridge along with the past producing Dolly Varden and Torbrit silver mines. It is considered to be prospective for hosting further precious metal deposits, being on the same structural and stratigraphic belts that host numerous other, on-trend, high-grade deposits, such as Eskay Creek and Brucejack. The Kitsault Valley Project also contains the Big Bulk property which is prospective for porphyry and skarn style copper and gold mineralization, similar to other such deposits in the region (Red Mountain, KSM, Red Chris).

Forward-Looking Statements

This release may contain forward-looking statements or forward-looking information under applicable Canadian securities legislation that may not be based on historical fact, including, without limitation, statements containing the words “believe”, “may”, “plan”, “will”, “estimate”, “continue”, “anticipate”, “intend”, “expect”, “potential”, and similar expressions. Forward-looking statements involve known and unknown risks, uncertainties, and other factors which may cause the actual results, performance, or achievements of Dolly Varden to be materially different from any future results, performance, or achievements expressed or implied by the forward-looking statements. Forward-looking statements or information in this release relates to, among other things, the results of previous field work and programs and the continued operations of the current exploration program, interpretation of the nature of the mineralization at the project and that that the mineralization on the project is similar to Eskay and Brucejack, results of the mineral resource estimate on the project, the potential to grow the project, the potential to expand the mineralization and our beliefs about the unexplored portion of the property.

These forward-looking statements are based on management’s current expectations and beliefs and assume, among other things, the ability of the Company to successfully pursue its current development plans, that future sources of funding will be available to the company, that relevant commodity prices will remain at levels that are economically viable for the Company and that the Company will receive relevant permits in a timely manner in order to enable its operations, but given the uncertainties, assumptions and risks, readers are cautioned not to place undue reliance on such forward-looking statements or information. The Company disclaims any obligation to update, or to publicly announce, any such statements, events or developments except as required by law.

For additional information on risks and uncertainties, see the Company’s most recently filed annual management discussion & analysis (“MD&A“) and management information circular dated January 21, 2022 (the “Circular“), both of which are available on SEDAR at www.sedar.com. The risk factors identified in the MD&A and the Circular are not intended to represent a complete list of factors that could affect the Company.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX-V) accepts responsibility for the adequacy or accuracy of this news release.

For further information: Shawn Khunkhun, CEO & Director, 1-604-609-5137, www.dollyvardensilver.com.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/163488

Categories
Base Metals Energy Junior Mining Metallic Group Stillwater Critical Minerals

Stillwater Critical Minerals Appoints Dr. Wolfgang Maier as Senior Geological Advisor

VANCOUVER, BC / ACCESSWIRE / April 20, 2023 / Stillwater Critical Minerals Corp. (TSXV:PGE)(OTCQB:PGEZF) (the “Company”, “Stillwater” or “SWCM”) is pleased to announce that Wolfgang Maier, Ph.D., a recognized world expert geologist in magmatic mineral deposits, has joined the Company as Senior Geological Advisor.

Stillwater Critical Minerals, Thursday, April 20, 2023, Press release picture
Figure 1 – Stillwater Critical Minerals personnel at Stillwater West in August 2022 (L-R): Dr. Wolfgang Maier, Senior Geological Advisor, Dr. Danie Grobler, Vice-President Exploration, and Greg Johnson, Chairman of the Board

Dr. Maier has more than 25 years of global experience in mafic-ultramafic igneous systems and the formation of magmatic ore deposits, including deposits of nickel, copper, cobalt, platinum group elements (“PGE”), and chromium. He has authored and co-authored 144 publications which have received 5,175 citations to date and has been a contributing author or editor of several books, monographs, and geological maps. Dr. Maier studied geology at the Ludwig Maximilian University of Munich, Germany and at Rhodes University, South Africa, including doctoral studies on the Bushveld Complex in 1992. He taught igneous petrology and economic geology at the Universities of Pretoria (South Africa), University of Quebec at Chicoutimi (Canada), UWA (Australia), and Oulu (Finland) before joining Cardiff University in 2013 where he is currently a professor with the School of Earth and Environmental Sciences. In addition to his work studying the formation of magmatic ore deposits including PGE, Ni-Cu, Cr, and V-Ti-Fe deposits, Dr. Maier is also interested in increasing the sustainability of both exploration and mining.

Dr. Wolfgang Maier commented, “I am very impressed with the potential of the Stillwater project and excited to contribute to the exceptional team assembled by Stillwater Critical Minerals. During my site visit in 2022, I was impressed by the relatively underexplored nature of the lower Stillwater complex, which is surprising as the Stillwater Igneous Complex hosts the highest-grade platinum group element reef system in the world and the lower Stillwater complex shows similar exceptional PGE tenor within the more broadly mineralized nickel, copper, cobalt and chromium enriched lower magmatic stratigraphy. I look forward to further collaboration as SWCM focuses on expansion of their current resources and follows up on its exciting high-grade discovery holes in 2023. The potential for continued discovery of these important battery metals along with significant PGEs at Stillwater is outstanding.”

Dr. Danie Grobler, Stillwater Critical Minerals’ Vice-President of Exploration, stated, “We are very pleased to welcome Dr. Maier to the technical team at Stillwater in follow-up to his extended tour of the project last year. During his career, Dr Maier has worked on and published papers about most of the economically important layered mafic-ultramafic intrusives globally. Dr Maier’s extensive scientific understanding of these important critical metal deposits complements our experienced exploration team as we prioritize high-grade nickel, copper, cobalt, and platinum group element mineralized zones within the lower part of the Stillwater layered magmatic stratigraphy. We are currently finalizing our exploration plans for 2023 which will focus on continued expansion drilling at the resource areas. Particular focus is planned for targets adjacent to high-grade discovery intersects such as CM2021-05 at Chrome Mountain which intersected 13.2 meters of high-grade nickel sulphide grading 2.31% Ni, 0.35% Cu, 0.115% Co and 1.51 g/t PGEs+Au within 400.8 meters of continuous mineralization, and CZ2021-01 at Iron Mountain, which intersected 4.6 meters grading 0.96% Ni, 0.49% Cu, 0.073% Co and 0.87 g/t PGEs+Au within 367.6 meters of continuous mineralization.”

About Stillwater Critical Minerals Corp.

Stillwater Critical Minerals (TSX.V: PGE | OTCQB: PGEZF) is a mineral exploration company focused on its flagship Stillwater West Ni-PGE-Cu-Co + Au project in the iconic and famously productive Stillwater mining district in Montana, USA. With the recent addition of two renowned Bushveld and Platreef geologists to the team, the Company is well positioned to advance the next phase of large-scale critical mineral supply from this world-class American district, building on past production of nickel, copper, and chromium, and the on-going production of platinum group and other metals by neighboring Sibanye-Stillwater. An expanded NI 43-101 mineral resource estimate, released January 2023, delineates a compelling suite of critical minerals contained within five Platreef-style nickel and copper sulphide deposits at Stillwater West, which host a total of 1.6 billion pounds of nickel, copper and cobalt, and 3.8 million ounces of palladium, platinum, rhodium, and gold, and remains open for expansion along trend and at depth.

Stillwater Critical Minerals also holds the high-grade Black Lake-Drayton Gold project adjacent to Treasury Metals’ development-stage Goliath Gold Complex in northwest Ontario, currently under an earn-in agreement with Heritage Mining, and the Kluane PGE-Ni-Cu-Co critical minerals project on trend with Nickel Creek Platinum‘s Wellgreen deposit in Canada‘s Yukon Territory.

FOR FURTHER INFORMATION, PLEASE CONTACT:

Michael Rowley, President, CEO & Director – Stillwater Critical Minerals
Email: info@criticalminerals.com Phone: (604) 357 4790
Web: http://criticalminerals.com Toll Free: (888) 432 0075

Quality Control and Quality Assurance

2021 drill core samples were analyzed by ACT Labs in Vancouver, B.C. Sample preparation: crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm included cleaner sand. Gold, platinum, and palladium were analyzed by fire assay (1C-OES) with ICP finish. Selected major and trace elements were analyzed by peroxide fusion with 8-Peroxide ICP-OES finish to insure complete dissolution of resistate minerals. Following industry QA/QC standards, blanks, duplicate samples, and certified standards were also assayed.

Mr. Mike Ostenson, P.Geo., is the qualified person for the purposes of National Instrument 43-101, and he has reviewed and approved the technical disclosure contained in this news release.

Forward-Looking Statements

Forward Looking Statements: This news release includes certain statements that may be deemed “forward-looking statements”. All statements in this release, other than statements of historical facts including, without limitation, statements regarding potential mineralization, historic production, estimation of mineral resources, the realization of mineral resource estimates, interpretation of prior exploration and potential exploration results, the timing and success of exploration activities generally, the timing and results of future resource estimates, permitting time lines, metal prices and currency exchange rates, availability of capital, government regulation of exploration operations, environmental risks, reclamation, title, and future plans and objectives of the company are forward-looking statements that involve various risks and uncertainties. Although Group Ten believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Forward-looking statements are based on a number of material factors and assumptions. Factors that could cause actual results to differ materially from those in forward-looking statements include failure to obtain necessary approvals, unsuccessful exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital and financing on acceptable terms, general economic, market or business conditions, risks associated with regulatory changes, defects in title, availability of personnel, materials and equipment on a timely basis, accidents or equipment breakdowns, uninsured risks, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the companies with securities regulators. Readers are cautioned that mineral resources that are not mineral reserves do not have demonstrated economic viability. Mineral exploration and development of mines is an inherently risky business. Accordingly, the actual events may differ materially from those projected in the forward-looking statements. For more information on Group Ten and the risks and challenges of their businesses, investors should review their annual filings that are available at www.sedar.com.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE: Stillwater Critical Minerals Corp.



View source version on accesswire.com:
https://www.accesswire.com/750421/Stillwater-Critical-Minerals-Appoints-Dr-Wolfgang-Maier-as-Senior-Geological-Advisor

Categories
Energy Gold Shore Resources Junior Mining Precious Metals Uncategorized

Goldshore Expands Gold Mineralization Along Strike and at Depth at the Southwest Zone; Includes Intersects 2.17 g/t Au over 50.35m and 6.96 g/t Au over 15.05m

Vancouver, British Columbia–(Newsfile Corp. – April 20, 2023) – Goldshore Resources Inc. (TSXV: GSHR) (OTCQB: GSHRF) (FSE: 8X00) (“Goldshore” or the “Company“), is pleased to announce assay results from its recently completed drill program at the Moss Lake Project in Northwest Ontario, Canada (the “Moss Gold Project“).

Highlights:

  • Results from seven holes testing the extension of the Southwest Zone toward the Main Zone have delineated a new high-grade lens, including visible gold, northeast of the Southwest Zone resource that extends from surface to at least 250 meters depth with best intercepts of:
  • 6.96 g/t Au over 15.05m from 189.4m depth in MMD-22-105, including
    • 54.4 g/t Au over 1.6m from 189.4m
  • 2.17 g/t Au over 50.35m from 103.55m depth in MMD-23-114, including
    • 3.47 g/t Au over 26.05m from 120.35m
  • 1.30 g/t Au over 21.35m from 214m depth in MMD-22-108, including
    • 2.60 g/t Au over 7.35 from 228.0m
  • These drill results prove that the Southwest Zone is a continuation of the Main Zone and not a fault offset as previously interpreted. They also show that the Southwest Zone extends to depth and is potentially as large as the Main Zone.
  • With drilling recently completed, the Company is preparing an updated mineral resource expected in May. The updated resource will use data from an additional 72 holes compared to the November 2022 resource. Mineralization in the resource area remains open in multiple directions.

President and CEO Brett Richards stated: “These results continue to support our belief that the size and scale of the Moss Gold Project is much larger and continues to be open at all directions, along strike both to the northeast and southwest, as well as our understanding of lateral mineralized targets to the south-east of the Southwest Zone and the Main Zone. For now, we have halted the program to step back; understand the quantum of this resource, and prepare for a mineral resource update in early May, we can now see a viable path to a meaningful project PEA (preliminary economic analysis). We look forward to those results in the coming months, as we start to plan for an infill drilling program working towards a pre-feasibility study in the future.”

Technical Overview

Figure 1 shows the location of the drill holes in this press release and Figure 2 shows a close up of the drilled area with significant intercepts. Figure 3 is a typical section through hole MMD-22-105, -108 and -109. Table 1 shows the significant intercepts. Table 2 shows the drill hole locations.

Figure 1: Location of drill holes in this release relative to the November 2022 resource model and $1500 open pit shell constraint

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8051/163107_af741d8ce40c4b17_002full.jpg

Figure 2: insert close up of Southwest Zone with significant intercepts relative to the November 2022 resource model and $1500 open pit shell constraint

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8051/163107_af741d8ce40c4b17_003full.jpg

Figure 3: Drill section through holes MMD-22-105, -108 and -109 showing the significant expansion of the mineralized model beneath the November 2022 resource model and $1500 open pit shell constraint, which should add to mineral resources in the upcoming update

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8051/163107_af741d8ce40c4b17_004full.jpg

Continued infill of the Southwest Zone has delineated a new continuous high-grade structure over a 250m strike length from near surface to 200m depth immediately northeast of the historical Southwest Zone. Holes MMD-22-105, -108, -109 and MMD-23-113, and -114 intersected this structure along with previously released holes MMD-22-031, -042, -063, and -064. The newly understood zone orientation was tested against the phase 1 drill results and confirmed the continuity of the high-grade structures controlling the mineralization.

The mineralized zone occurs within an albitite+hematite altered diorite intrusion complex cut by closely spaced, texturally destructive sericite+chlorite+carbonate altered shears. Additional shearing, and subsequent alteration, is seen extending into the neighboring intermediate volcanics but is poorly mineralized.

The gold mineralization appears more nuggety than elsewhere in the deposit with a greater portion of the mineralization attributed to pyrite±chalcopyrite bearing quartz-carbonate veins within the sheared intervals. Mineralization includes visible gold (Figure 4). Several very high-grade intercepts include:

  • 54.4 g/t Au over 1.6m from 189.4m depth in MMD-22-105
  • 11.3 g/t Au over 0.5m from 147.7m depth in MMD-22-108 and
  • 11.5 g/t Au over 0.7m from 232.35m
  • 10.6 g/t Au over 0.95m from 323.3m depth in MMD-23-112
  • 19.0 g/t Au over 0.65m from 54m depth in MMD-23-114 and
  • 22.9 g/t Au over 1m from 128m depth and
  • 14.4 g/t Au over 1m from 137m depth

Holes MMD-22-109 and MMD-23-113 intersected the high-grade structure but encountered lesser vein mineralization resulting in more modest grade intercepts including:

  • 0.44 g/t Au over 81.2m from 298.8m depth in MMD-22-109, including
    • 1.08 g/t Au over 8.60m from 335.35m
  • 0.63 g/t Au over 29.5m from 129.55m depth in MMD-23-113, including
    • 4.76 g/t Au over 2.0m from 140.0m and
  • 0.51 g/t Au over 58m from 204.0m depth, including
    • 1.92 g/t Au over 4.0m from 205.0m and
    • 1.84 g/t Au over 3.0m from 229.0m

Holes MMD-22-106, and MMD-23-112 were focused on infilling the drill spacing of the existing Southwest Zone. All three holes intercepted broad zones of mineralization hosted primarily within altered granodiorite containing narrow higher grade shear zones. Best intercepts include:

  • 0.47 g/t Au over 63m from 277m depth in MMD-22-106
  • 0.61 g/t Au over 41.25m from 232m depth in MMD-23-112
  • 0.39 g/t Au over 53.5m from 301m depth in MMD-23-112

Figure 1: Visible gold flake within a quartz-carbonate-pyrite vein at 190.42m (1.6m @ 54.4 g/t Au) in MMD-22-105 within the sheared, altered intrusion of the Southwest zone. Note that this photo is not intended to be representative of broader mineralization on the Moss Lake Gold Project.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8051/163107_af741d8ce40c4b17_005full.jpg

Pete Flindell, VP Exploration for Goldshore, said, “These results show that the Southwest Zone is much larger and better mineralized than historical drillholes suggested; and is potentially as large as the Main Zone. We await the results from the final batch of assays that are expected to provide critical infill beneath the heart of the Southwest Zone.”

Table 1: Significant downhole gold intercepts

HOLEIDFROMTOLENGTH (m)TRUE WIDTH
(m)		CUT GRADE
(g/t Au)		UNCUT GRADE
(g/t Au)
MMD-22-10545.0048.003.002.30.330.33
62.0066.454.453.50.340.34
117.55125.007.456.00.380.38
189.40204.4515.0512.53.646.96
including189.40191.001.601.330.054.4
MMD-22-106165.00187.0022.0015.70.330.33
204.20229.0024.8018.00.500.50
256.00263.007.005.20.340.34
277.00292.4015.4011.50.370.37
299.20340.0040.8030.90.590.59
including325.00335.0010.007.61.171.17
353.15384.0030.8523.90.610.61
including359.00368.709.707.51.081.08
MMD-22-108126.55133.156.604.70.360.36
143.55168.0024.4517.60.620.62
including143.55148.204.653.31.991.99
including147.70148.200.500.411.311.3
190.80196.255.454.00.310.31
214.00235.3521.3515.91.301.30
including215.40218.002.601.91.101.10
and228.00235.357.355.52.602.60
including232.35233.050.700.511.511.5
319.00322.153.152.50.370.37
MMD-22-109238.35244.005.654.10.520.52
271.00274.003.002.20.370.37
298.80380.0081.2061.20.440.44
including335.35343.958.606.51.081.08
395.10404.659.557.40.390.39
MMD-23-112103.35106.853.502.50.380.38
118.00138.0020.0014.30.390.39
179.00182.003.002.20.570.57
207.00218.9011.908.91.171.17
including207.00215.008.006.01.631.63
232.00273.2541.2531.50.610.61
287.10290.103.002.30.330.33
301.00309.008.006.30.320.32
313.00354.0541.0532.80.420.42
including323.00325.602.602.14.414.41
including323.30324.250.950.810.610.6
368.00370.002.001.60.710.71
423.85428.504.653.80.330.33
462.00472.7510.759.00.560.56
526.80532.005.204.40.370.37
MMD-23-11318.0042.0024.0016.20.420.42
including31.0034.003.002.01.551.55
129.55132.002.451.80.410.41
136.00165.5029.5021.60.630.63
including140.00142.002.001.54.764.76
204.00262.0058.0044.50.510.51
including205.00209.004.003.01.921.92
and229.00232.003.002.31.841.84
274.00276.002.001.60.330.33
289.00291.002.001.60.310.31
332.00334.302.301.80.820.82
MMD-23-11430.0032.252.251.70.330.33
40.6562.6522.0016.30.780.78
including54.0054.650.650.519.019.0
103.55153.9050.3538.82.172.17
including120.35146.4042.8520.03.473.47
including128.00129.001.000.822.922.9
and137.00138.001.000.814.414.4
183.00189.856.855.40.360.36

Intersections calculated above a 0.3 g/t Au cut off with a top cut of 30 g/t Au and a maximum internal waste interval of 10 metres. Shaded intervals are intersections calculated above a 1.0 g/t Au cut off. Intervals in bold are those with a grade thickness factor exceeding 20 gram x metres / tonne gold. True widths are approximate and assume a subvertical body.

Table 2: Location of drill holes in this press release

HOLEEASTNORTHRLAZIMUTHDIPEOH
MMD-22-105668,4985,378,484438110°-41°249
MMD-22-106668,4385,378,379440126°-50°450
MMD-22-108668,5245,378,519437125°-50°450
MMD-22-109668,4665,378,591427125°-51°501
MMD-23-112668,1725,378,186443125°-50°600
MMD-23-113668,4945,378,469438126°-50°450
MMD-23-114668,5335,378,424428123°-44°402

Analytical and QA/QC Procedures

All samples were sent to ALS Geochemistry in Thunder Bay for preparation and analysis was performed in the ALS Vancouver analytical facility. ALS is accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025. Samples were analyzed for gold via fire assay with an AA finish (“Au-AA23”) and 48 pathfinder elements via ICP-MS after four-acid digestion (“ME-MS61”). Samples that assayed over 10 ppm Au were re-run via fire assay with a gravimetric finish (“Au-GRA21”).

In addition to ALS quality assurance / quality control (“QA/QC”) protocols, Goldshore has implemented a quality control program for all samples collected through the drilling program. The quality control program was designed by a qualified and independent third party, with a focus on the quality of analytical results for gold. Analytical results are received, imported to our secure on-line database and evaluated to meet our established guidelines to ensure that all sample batches pass industry best practice for analytical quality control. Certified reference materials are considered acceptable if values returned are within three standard deviations of the certified value reported by the manufacture of the material. In addition to the certified reference material, certified blank material is included in the sample stream to monitor contamination during sample preparation. Blank material results are assessed based on the returned gold result being less than ten times the quoted lower detection limit of the analytical method. The results of the on-going analytical quality control program are evaluated and reported to Goldshore by Orix Geoscience Inc.

About Goldshore

Goldshore is an emerging junior gold development company, and owns 100% of the Moss Gold Project located in Ontario. Wesdome is currently a large shareholder of Goldshore with an approximate 22% equity position in the Company. Well-financed and supported by an industry-leading management group, board of directors and advisory board, Goldshore is positioned to advance the Moss Gold Project through the next stages of exploration and development.

Peter Flindell, P.Geo., MAusIMM, MAIG, Vice President – Exploration of the Company, a qualified person under NI 43-101 has approved the scientific and technical information contained in this news release.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

For More Information – Please Contact:

Brett A. Richards
President, Chief Executive Officer and Director
Goldshore Resources Inc.

P. +1 604 288 4416 M. +1 905 449 1500
E. brichards@goldshoreresources.com
W. www.goldshoreresources.com

Facebook: GoldShoreRes | Twitter: GoldShoreRes | LinkedIn: goldshoreres

Cautionary Note Regarding Forward-Looking Statements

This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance or achievements, or developments to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur.

Forward-looking statements in this news release include, among others, statements relating to expectations regarding the exploration and development of the Moss Lake Gold Project, the release of an updated mineral resource estimate and preliminary economic assessment, and other statements that are not historical facts. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors and risks include, among others: the Company may require additional financing from time to time in order to continue its operations which may not be available when needed or on acceptable terms and conditions acceptable; compliance with extensive government regulation; domestic and foreign laws and regulations could adversely affect the Company’s business and results of operations; the stock markets have experienced volatility that often has been unrelated to the performance of companies and these fluctuations may adversely affect the price of the Company’s securities, regardless of its operating performance; and the impact of COVID-19.

The forward-looking information contained in this news release represents the expectations of the Company as of the date of this news release and, accordingly, is subject to change after such date. Readers should not place undue importance on forward-looking information and should not rely upon this information as of any other date. The Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/163107

Categories
Base Metals Energy Junior Mining Rover Metals

ROVER METALS RECEIVES EXPLORATION DRILL PERMIT FOR NEVADA LITHIUM PROJECT

Rover Metals Corp.
Rover Metals Corp.

VANCOUVER, British Columbia, April 19, 2023 (GLOBE NEWSWIRE) — Rover Metals Corp. (TSXV: ROVR) (OTCQB: ROVMF) (FSE:4XO) (“Rover” or the “Company”) is pleased to announce that it has it received its exploration drill permit from the Bureau of Land Management (“BLM”) to further exploration at its Let’s Go Lithium (“LGL”) project, NV, USA.

Let’s Go Lithium Project
The LGL project is located on approximately 6,000 acres of BLM land within the prolific southwest Nevada claystone lithium jurisdiction. The BLM permit allows for up to 30 drill holes to a depth of up to 90 meters per hole. The LGL project is located 12 km east-northeast of the historic Franklin Wells hectorite mine. The project includes green energy infrastructure of hydro power lines on site, direct road access, and a nearby town with a readily available work force. The Company is planning an RC drill program to follow-up on the high-grade lithium surface samples (see Phase 1 Exploration below) taken on the project in 2022.

LGL Property Map

Phase 1 Exploration at LGL – 2022
In H2-2022, the Company, through the vendor of the LGL project, and through ALS Laboratories, verified high-grade lithium surface samples at the project. Highlights of these surface grab samples processed by ALS Laboratories include: Sample# AMZ-8 of 780ppm Li, Sample# AMZ-26 of 910ppm Li, and Sample# AMZ-28 of 710ppm Li. The Company has pulled additional surface grab samples from the project and analysed them with a Handheld Laser Induced Breakdown Spectroscopy (“HH LIBS”). Highlights of the HH LIBS include: 1,218 ppm Li, 778 ppm Li, 724 ppm Li, and 707 ppm Li. Historic water well drill logs spread across the LGL project suggest an average thickness of the clay beds to be approximately 105 meters.

Regional Geology
LGL is located just 12 km away from the historic Franklin Wells hectorite (a rare lithium smectite mineral) deposit. Mining at Franklin Wells dates back to the 1920’s. The regional geology of the Amargosa Valley is a basin-and-range structure with the Greenwater Range and Funeral Mountains to the west and the Amargosa Desert to the east. The Greenwater/Funeral mountains are fault-controlled with narrow interior valleys and are bounded by broad, coalescing alluvial fans. The Greenwater/Funeral mountains are composed of lower Paleozoic marine and metamorphic rocks. LGL is located in a large basin of clay rich Tertiary lakebed sediments, the major host rock for the other lithium claystone deposits in the southwest Nevada lithium jurisdiction.

Later-stage company comparable claystone lithium projects in southwest Nevada include Century Lithium Corp.’s Clayton Valley project; American Lithium’s TLC project; Spearmint Resources’ McGee project; Noram Lithium’s Zeus project, and Nevada Lithium’s Bonnie Claire project. All of the aforementioned companies are later-stage mining companies, with a NI 43-101 resource calculation.

Technical information has been approved by David White, P.Geo., QP for the purposes of NI 43-101. ALS Laboratories is ISO/IEC 17025:2017 and ISO 9001:2015 certified.

Judson Culter, CEO at Rover Metals, states, “It’s been a great start to the year for Nevada claystone lithium projects. In Jan-2023, the Rhyolite Ridge project received a USD700MM conditional loan from U.S. Department of Energy Loan Programs Office. In Jan-2023, American Lithium announced a successful pilot plant processing of Lithium Carbonate from its TLC project. In Feb-2023, General Motors announced its intent to invest USD65MM into the Thacker Pass project. Reno, NV, also happens to be home to the Tesla battery factory. Management at Rover Metals believes that the LGL project is a well-timed, low cost exploration development project in the right area code. Management is currently reviewing proposals from drilling companies as we plan on embarking on our maiden drill program at the LGL project, now that we have our permit. Exact start dates will be the subject of a future news release.”

Advisor Appointments and Stock Option Grants
The Company has appointed John Zimmerman and Don Merrick to its advisory board. John and Don will help lead the technical team in Nevada and provide continued business development for new lithium opportunities in the U.S.

John Zimmerman has an BS in Geology from the University of California at Davis and an MS in Geology from the University of Arizona, and has been active in western US mineral exploration for over 40 years. He was the co-discoverer of the Chimney Creek (Twin Creeks) Mine, a 20 million oz. gold deposit, and as a result has an enviable reputation in the Industry. He is an expert in western US gold and lithium exploration and has been a consistent generator of quality exploration opportunities in in the US exploration and elsewhere. Mr. Zimmerman has been active in all phases of mineral exploration including strategy, planning, budgeting, property evaluation, and project generation. He has contributed to the success of several prosperous explorers including Newmont, Goldfields Mining, and Meridian Gold. Most recently, he directed all Great Basin gold exploration of BHP Minerals International. In addition to Nevada, he has worked in China and South America. Merrick and Zimmerman were the co-owners of Genesis Gold Corporation and built it into a success which they sold for several million dollars in 2020.

Don Merrick has been active in Great Basin gold exploration for over 40 years and has been involved in several successful exploration efforts. For 12 years, Mr. Merrick was the primary project generator and evaluator for BHP Minerals International in the Great Basin. Since leaving BHP, he has done grubstake generative work for Gold Fields and Kennecott, optioning properties to Gold Fields, Western Mining, and MK Gold. Most recently, he helped found Gateway Gold Corp., where as VP Exploration he discovered over 2.4 million ounces of gold. As a prospect generator, he has generated quality prospects for numerous other mining companies, including: Newmont, Barrick, Asarco, Plexus, Santa Fe Gold, Euro-Nevada, Gold Fields, Metalla Royalty and EMX Royalty. In addition to Nevada, he has work in Central America, China, and Russia.

Pursuant to the Zimmerman and Merrick advisory appointments, each will receive a stock option grant of 350,000 stock options with an exercise price of $0.12 under the standard terms of the Company’s stock option plan, which provides for a four-year life.

Re-pricing of Insider Stock Options
On March 28, 2023, the Company held its annual general and special meeting of its shareholders. Included in the agenda for the meeting was the re-pricing of issued and outstanding Insider stock options, on a post-consolidation basis, as a result of the Company’s six-for-one share consolidation that was effective October 28, 2022. Pursuant to the Toronto Venture Exchange’s (the “TSXV”) policies, the Company did receive majority approval from disinterested shareholders to re-price Insider stock options. As a result, the Company will be applying to the TSXV for final approval of the stock option re-pricings. The following is a table of the proposed stock option re-pricings:

RoleGrant DateNumber of OptionsOriginal Exercise PriceAmended Exercise Price
DirectorJuly 29, 2020133,333$0.45$0.15
DirectorJanuary 6, 202166,666$0.72$0.15
DirectorApril 26, 202266,666$0.36$0.15
CFOSeptember 24, 202050,000$0.51$0.15
Investor RelationsJanuary 1, 202114,583
14,583
14,583
14,583		$0.75
$0.90
$1.05
$1.20		$0.15
$0.15
$0.20
$0.20
Investor RelationsAugust 4, 202129,166
29,166
29,166
29,166		$0.75
$0.90
$1.05
$1.20		$0.15
$0.15
$0.20
$0.20
Investor RelationsFebruary 14, 202233,333
33,333
33,333		$0.36
$0.45
$0.54		$0.15
$0.20
$0.20

About Rover Metals
Rover is a publicly traded junior mining company that trades on the TSXV under symbol ROVR, on the OTCQB under symbol ROVMF, and on the FSE under symbol 4XO. Rover is currently focussed on the development of a claystone lithium project in southwest Nevada, USA. Plans for 2023 include a reverse circulation drill program at the Let’s Go Lithium project.

The Company has a diverse portfolio of mining resource development projects with varying exploration timelines. Its critical mineral projects include lithium, zinc, and copper. Its precious metals projects include gold and silver. The Company is exclusive to the mining jurisdictions of Canada and the U.S.

You can follow Rover on its social media channels:
Twitter: https://twitter.com/rovermetals
LinkedIn: https://www.linkedin.com/company/rover-metals/
Facebook: https://www.facebook.com/RoverMetals/
for daily company updates and industry news, and
YouTube: https://www.youtube.com/channel/UCJsHsfag1GFyp4aLW5Ye-YQ?view_as=subscriber
for corporate videos.
Website: https://www.rovermetals.com/

ON BEHALF OF THE BOARD OF DIRECTORS
“Judson Culter”
Chief Executive Officer and Director

For further information, please contact:
Email: info@rovermetals.com
Phone: +1 (778) 754-2855

Statement Regarding Forward-Looking Information

This news release contains statements that constitute “forward-looking statements.” Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause Rover’s actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking statements. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “potential” and similar expressions, or that events or conditions “will,” “would,” “may,” “could” or “should” occur. There can be no assurance that such statements prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements, and readers are cautioned not to place undue reliance on these forward-looking statements. Any factor could cause actual results to differ materially from Rover’s expectations. Rover undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.

THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS NEWS RELEASE REPRESENTS THE EXPECTATIONS OF THE COMPANY AS OF THE DATE OF THIS NEWS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE THE COMPANY MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE LAWS.

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OF THIS RELEASE.

Categories
Base Metals Diamcor Mining Junior Mining

Diamcor Appoints Award Winning Ross McElroy as Special Advisor

KELOWNA, BC / ACCESSWIRE / April 18, 2023 / Diamcor Mining Inc. (TSXV:DMI) (OTCQB:DMIFF) (FRA:DC3A), (“Diamcor” or, the “Company”) is pleased to announce the appointment of Mr. Ross McElroy as Special Advisor to the Company.

Mr. McElroy is a professional geologist with over 35 years of experience in the mining industry, holds a Bachelor’s Degree in Science with a Specialization in Geology from the University of Alberta in 1987, and is a registered professional geologist in Saskatchewan, British Columbia and Nunavut/Northwest Territories. He is the winner of the 2014 PDAC Bill Dennis award for exploration success and the Northern Miner “Mining Person of the Year Award”. Mr. McElroy’s comprehensive experience includes working and managing many types of mineral projects from grass roots exploration to feasibility and production. He has held senior technical and executive positions with both major and mid-tier mining companies, which include BHP, Orano, and Cameco. He was a key member of the discovery team of the giant MacArthur River uranium deposit and played a key roll in the discoveries and development of the hugely successful Fission Uranium Corp, where he presently holds the role as President and CEO. Mr. McElroy has also had a successful career in the search, discovery, development and mining of other commodities including diamonds during the several years he spent as Senior Geologist for BHP’s Ekati diamond mining operation in northern Canada.

“After many years of informal discussions on our Project and our long-term goals, I am very pleased to now have Mr. McElroy as a technical advisor to our Company,” stated Mr. Dean Taylor, Diamcor’s CEO. “I truly believe his input based on his past experiences and continued interest in the diamond sector, along with his proven ability to successfully advance various projects from discovery to production, will prove very beneficial to Diamcor.”

“Diamcor’s Krone-Endora at Venetia Project has always been a point of many interesting discussions, and the fact they are dealing with a significant low-cost displacement project from the prolific De Beers Venetia mine presents an attractive scenario,” stated Mr. Ross McElroy. “I know that the entire management team’s post-Covid focus is to execute its previous plans to grow the Project and expand their business. I look forward to providing them with my insight to enhance their ability to do so,” added Mr. McElroy.

About Diamcor Mining Inc.

Diamcor Mining Inc. is a fully reporting publicly traded junior diamond mining company which is listed on the TSX Venture Exchange under the symbol V.DMI, and on the OTC QB International under the symbol DMIFF. The Company has a well-established operational and production history in South Africa and extensive prior experience supplying rough diamonds to the world market.

About the Tiffany & Co. Alliance

The Company has established a long-term strategic alliance and first right of refusal with Tiffany & Co. Canada, a subsidiary of world famous New York based Tiffany & Co., to purchase up to 100% of the future production of rough diamonds from the Krone-Endora at Venetia Project at then current prices to be determined by the parties on an ongoing basis. In conjunction with this first right of refusal, Tiffany & Co. Canada also provided the Company with financing to advance the Project. Tiffany & Co. is now owned by Moet Hennessy Louis Vuitton SE (LVMH), a publicly traded company which is listed on the Paris Stock Exchange (Euronext) under the symbol LVMH and on the OTC under the symbol LVMHF. For additional information on Tiffany & Co., please visit their website at www.tiffany.com.

About Krone-Endora at Venetia

In February 2011, Diamcor acquired the Krone-Endora at Venetia Project from De Beers Consolidated Mines Limited, consisting of the prospecting rights over the farms Krone 104 and Endora 66, which represent a combined surface area of approximately 5,888 hectares directly adjacent to De Beers’ flagship Venetia Diamond Mine in South Africa. On September 11, 2014, the Company announced that the South African Department of Mineral Resources had granted a Mining Right for the Krone-Endora at Venetia Project encompassing 657.71 hectares of the Project’s total area of 5,888 hectares. The Company has also submitted an application for a mining right over the remaining areas of the Project. The deposits which occur on the properties of Krone and Endora have been identified as a higher-grade “Alluvial” basal deposit which is covered by a lower-grade upper “Eluvial” deposit. The deposits are proposed to be the result of the direct-shift (in respect to the “Eluvial” deposit) and erosion (in respect to the “Alluvial” deposit) of material from the higher grounds of the adjacent Venetia Kimberlite areas. The deposits on Krone-Endora occur in two layers with a maximum total depth of approximately 15.0 metres from surface to bedrock, allowing for a very low-cost mining operation to be employed with the potential for near-term diamond production from a known high-quality source. Krone-Endora also benefits from the significant development of infrastructure and services already in place due to its location directly adjacent to the Venetia Mine.

Qualified Person Statement:

Mr. James P. Hawkins (B.Sc., P.Geo.), is Manager of Exploration & Special Projects for Diamcor Mining Inc., and the Qualified Person in accordance with National Instrument 43-101 responsible for overseeing the execution of Diamcor’s exploration programmes and a Member of the Association of Professional Engineers and Geoscientists of Alberta (“APEGA”). Mr. Hawkins has reviewed this press release and approved of its contents.

On behalf of the Board of Directors

Mr. Dean H. Taylor
President & CEO

Diamcor Mining Inc.
www.diamcormining.com

For further information contact:

Mr. Dean H. Taylor
Diamcor Mining Inc
DeanT@Diamcor.com
+1 250 862-3212

Mr. Rich Matthews
Integrous Communications
rmatthews@integcom.us
+1 (604) 355-7179

This press release contains certain forward-looking statements. While these forward-looking statements represent our best current judgement, they are subject to a variety of risks and uncertainties that are beyond the Company’s ability to control or predict and which could cause actual events or results to differ materially from those anticipated in such forward-looking statements. Further, the Company expressly disclaims any obligation to update any forward looking statements. Accordingly, readers should not place undue reliance on forward-looking statements.

WE SEEK SAFE HARBOUR

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE: Diamcor Mining Inc.



View source version on accesswire.com:
https://www.accesswire.com/749724/Diamcor-Appoints-Award-Winning-Ross-McElroy-as-Special-Advisor

Categories
Base Metals Collective Mining Energy Junior Mining Precious Metals

Collective Mining Begins Mobilizing a Fourth Drill Rig to Test Six New High-Grade Porphyry Targets Within a 400 Metre Radius of the Apollo System

  • Exploration fieldwork has identified six well mineralized and outcropping porphyry and related style targets within a 400 metre radius of the Apollo system with assay results for soil and rock samples as follows:
  • Surface mapping at all six targets has outlined the same style of porphyry mineralization as the Apollo system, namely altered porphyry with vein stockwork, inter-mineral breccia with oxide followed by sulphides in the matrix and overprinting late-stage porphyry veins (“CBM Veins”).
  • Although the amount of rock and soil exposure in the sampling radius covering each of the six target areas is limited due to vegetation, historical landslides and volcanic ash cover, the scale of the areas and tenor of the assay results are similar to the original outcrop of the Apollo system. The Company estimates that there is no more than 5% rock exposure anywhere at the Guayabales project.
  • For comparison, the outcrop of the Apollo porphyry system prior to drilling only measured 10 metres in diameter. Subsequent drilling has outlined a porphyry system that to date measures 150 metres by 130 metres at surface, which then expands in dimensions quickly at depth to up to 500 metres wide and remains open.
  • Surface sampling was carried out in oxidized material and if the oxidation zone shares similar characteristics to the Apollo system, the copper and silver grades have been reduced by leaching. Recent drill results from Pad 6 and Pad 7 at Apollo corroborates this assertion.
  • A fourth drill rig is being mobilized to the project and is expected to initiate testing of the six new targets in late Q2, 2023.
  • Six additional holes have been completed at the Apollo system with assay results expected in the near term. APC-41, APC-42 and APC-45 are shorter holes designed to test the contact zones between the inter-mineral breccia and porphyry host rock in search of higher-grade sub zones. APC-44 and APC 46 are longer holes (up to 425 metres in mineralization) drilled from Pad 6 as part of a fan pattern to assess the shallow mineralization in this area and APC-47 is an exploratory hole drilled to the east from Pad 4 to test for mineralization beginning from below surface.

Ari Sussman, Executive Chairman commented: “The discovery of these new mineralized porphyry outcrops around Apollo are both exciting and significant for the Company. The original discovery outcrop of Apollo only covered a 10 metre radius and subsequent drilling has demonstrated that Apollo has the morphology of an inverted carrot with limited surface expression. This fact puts these new targets into perspective and highlights that the Apollo area is highly prospective for further exploration. We only found these new outcrops because of various recently excavated tracks emplaced to service and supply the drilling pads. I am looking forward to new drill rigs turning at these targets in the near term.”

TORONTO, April 18, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce exploration results from six newly generate porphyry and related style targets located within the Apollo target area at the Guayabales project located in Caldas, Colombia. The Apollo porphyry system is a high-grade, bulk tonnage copper-silver-gold system, which owes its excellent metal endowment to an older copper-silver and gold porphyry system being overprinted by younger precious metal rich, carbonate base metal vein systems (intermediate sulphidation porphyry veins) within a magmatic, hydrothermal inter-mineral breccia body currently measuring 395 metres x 385 metres x 915 metres and open for expansion.

Details (See Table 1 and Figures 1-3)

Exploration fieldwork has identified six target areas with outcropping porphyry style mineralization which are located within a 400 metre radius of the Apollo porphyry system. These new targets were generated by geological mapping, soil sampling and most importantly the emplacement of new tracks to enable supplies and equipment to be transported to the current drill pads in the area. Two key characteristics pertinent to understanding the potential impact of the targets and their associated metal values in rock and soil are as follows:

A. Collectively, the targets consist of all the same mineralization styles observed in the Apollo system, namely early-stage porphyry style with various porphyry veinlets, inter-mineral breccia, and late stage CBM veins which host higher values of gold and silver. The copper values range between 31 ppm and 1,410 ppm and reflect leaching of copper and silver due to surface oxidation. The leaching of copper in oxides at Apollo has been observed in all oxidized material drilled from Pad 6 and Pad 7. Copper values near surface in these drill holes display very similar grades to those observed in the six outcrops outlined in this release. Gold values range from 0.18 g/t to 8.29 g/t and silver values from 0.2 g/t to 346 g/t with variation in both cases related to the mineralization styles encountered.
B. Cognizance must be taken of the surface area and 3D morphology of the Apollo porphyry system when assessing these new porphyry outcrops. The original Apollo discovery outcrop was only 10 metres in diameter and was the only exposure identified prior to the drilling of discovery hole APC-1. The discovery outcrop had gold, silver, and copper values in the ranges of 0.07 to 4.1 g/t gold, 1.9 to 29 g/t silver and 377 to 1,023 ppm copper. After the erection of multiple drill pads, another two outcrop areas were located at Apollo following the construction of various tracks which were emplaced to service the various drill rigs with equipment and supplies. There is only approximately 5% outcrop exposure at the Guayabales project due to the dense vegetation and the covering of primary rock surfaces by historic landslide fill and young volcanic ash. Furthermore, drilling at the Apollo deposit has demonstrated that the surface expression is relatively small with a maximum known diameter at present of 150 metres whereas at depth this expands quickly to a known diameter of up to 500 metres. The deposit is still open in all directions.

The following brief descriptions and data are summarized for each outcrop target:

Target 1:

This target is located 200 metres west of the Apollo outcrop area. This outcrop has dimensions of 20 metres by 3 metres and hosts early-stage porphyry mineralization as well as clast supported crackle breccia with an iron oxide matrix cement of 3% to 5% in volume. Drusy quartz veining is superimposed on the breccia. Pervasive and strong sericite alteration overprints the rock exposures. Gold grades range from 1.13 g/t to 0.34 g/t with silver ranging from 0.2 g/t to 6.6 g/t and copper in the range of 90 ppm to 224 ppm.

Target 2:

This target is located 300 metres northeast of the Apollo system, has outcrop dimensions of 120 metres by 60 metres and contains a couple of historical and shallow artisanal mines. Geological mapping has identified altered porphyry hosting angular breccia with quartz diorite clasts. The matrix of the breccia has total sulphides of up to 5% which is predominantly pyrite with some chalcopyrite. CBM veinlets overprint the breccia and trend NW and EW. Alteration is strong and defined by sericite and chlorite. Gold values range from 8.29 g/t to 1.51 g/t, silver from 10 g/t to 346 g/t and copper from 72 ppm to 362 ppm.

Target 3:

Target 3 is located 300 metres east-northeast of the Apollo system and has outcrop dimensions of 15 metres by 3 metres. The outcrop area hosts angular breccia with quartz diorite clasts with an iron oxide cement (1%-2%) after sulphides. Strong Sericite-chlorite alteration is observed. The target has subsequently been expanded to 75 metres by 170 metres by anomalous gold in soil values. Rock samples range from 0.18 g/t to 0.63 g/t gold, silver ranges from 2 g/t to 68 g/t and copper from 43 ppm to 277 ppm.

Target 4:

This target is located 250 metres east of the Apollo system with dimensions measuring 20 metres x 4 metres and host crackle breccia of diorite composition and altered porphyry rocks. Breccia cement hosts 2%-3% iron oxide after sulphide while both the porphyry and breccia units are overprinted by CBM veinlets. Strong sericite alteration is observed in the outcrop. The target has been expanded to 150 metres by 100 metres by anomalous gold in soil values. Rock samples range from 0.90 to 4.31 g/t gold, 1 g/t to 56 g/t silver and copper ranges from 125 ppm to 323 ppm. 

Target 5:

This target area is located 100 metres due east of the Apollo system and has dimensions measuring 15 metres by 10 metres. Geology observed includes altered porphyry, angular breccia and late stage CBM veinlets. The breccia matrix hosts 3%-5% iron oxides after sulphide with strong sericitic alteration. Anomalous soil sample results for gold have expanded the target area to 200 metres by 100 metres. Rock samples range from 0.56 g/t to 5.59 g/t gold, 6 g/t to 70 g/t silver and copper ranges from 477 ppm to 833 ppm.

Target 6:

This target area is located 400 metres due southeast of the Apollo system and outcrops over a 30 metre diameter area. The outcrop hosts angular, polymictic, clast supported breccia (diorite and quartz diorite) and altered porphyry with quartz veinlets. The matrix cement hosts visible sulphides of 3%-5% and consists of chalcopyrite, sphalerite, galena and pyrite. Rock samples range from 0.39 g/t to 1.07 g/t gold, 6 g/t to 20 g/t silver and copper ranges from 32 ppm to 1,410 ppm.

Update on Apollo Drilling Progress

The Phase II drilling program of 2023 is advancing on schedule with thirteen holes completed and a further six holes in the lab awaiting assay results. Since the discovery of the Apollo porphyry system was announced in June 2022, a total of 44 drill holes (approximately 18,978 metres) have been completed and assayed.

Six additional holes have been completed from the three current drill pads with assay results expected in the near term. APC-44 and APC-46 are long holes drilled in westerly direction with continuous visual mineralization of up to 425 metres. APC-41, APC-42 and APC-45 are shorter holes designed to test the contact zones between breccia and porphyry in potentially higher-grade areas. APC-47 is an exploratory hole drilled to the east from Pad 4. Assay results are expected in the near term.

The Company presently has three diamond drill rigs operating at the Apollo project and additional assay results are expected in the near term.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers a 1,000 metres X 1,200 metres area, and represents a large and unusually high-grade Cu-Ag-Au porphyry system. Mineralization styles include early-stage porphyry veins, inter-mineral breccia mineralization and multiple zones of porphyry related late stage, sheeted, carbonate-base metal veins with high gold and silver grades. The Apollo target area is still expanding as the Company’s geologists have found multiple additional outcrop areas with porphyry veining, breccia, and late stage, sheeted, carbonate base metal veins.

Table 1: Assay Results for Sampling Undertaken on Targets 1 to 6 in the Apollo Target Area

Target #Sample
Type		Au (g/t)Ag (g/t)Cu (ppm)
Target 1Rock0.430.290.1
Target 1Rock0.340.2104.8
Target 1Rock0.881.8154.0
Target 1Rock0.910.6121.1
Target 1Rock1.136.6224.3
Target 2Rock1.5110.371.8
Target 2Rock7.0646.6146.0
Target 2Rock4.1078.0254.0
Target 2Rock4.5519.8309.0
Target 2Rock8.29345.6424.5
Target 2Rock6.55217.2362.0
Target 3Rock0.183.4155.9
Target 3Soil0.4367.743.0
Target 3Soil0.632.2277.0
Target 4Rock2.9735.6322.9
Target 4Soil0.901.3131.1
Target 4Soil2.8856.0198.2
Target 4Soil4.311.2124.6
Target 4Rock1.2827.9186.5
Target 5Rock5.5957.5833.1
Target 5Rock2.7069.7539.6
Target 5Rock2.4132.7507.7
Target 5Soil0.565.6477.0
Target 6Rock0.6019.81410.0
Target 6Rock0.3915.8217.3
Target 6Rock0.9516.441.9
Target 6Rock0.656.031.5
Target 6Rock1.0713.1132.3
Note: The values on the table correspond to rock chip and soil samples and should not be relied upon as being representative of average grades anticipated in any future resource estimate or mining scenario. Sample grades are uncapped and do not represent true width of the mineralization.
Rock and Soil samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.
Figure 1: Location and Assay Results of Rock and Soil Samples Taken From the Six Newly Generated Porphyry and Related Style Targets Surrounding the Apollo System (CNW Group/Collective Mining Ltd.)
Figure 1: Location and Assay Results of Rock and Soil Samples Taken From the Six Newly Generated Porphyry and Related Style Targets Surrounding the Apollo System (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target Area (CNW Group/Collective Mining Ltd.)
Figure 2: Plan View of the Guayabales Project Highlighting the Apollo Target Area (CNW Group/Collective Mining Ltd.)
Figure 3: Angular and Crackle Breccia in Target 6 (CNW Group/Collective Mining Ltd.)
Figure 3: Angular and Crackle Breccia in Target 6 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver, and gold exploration company with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper-silver-gold Apollo porphyry system. The Company’s near-term objective is to drill the shallow portion of the porphyry system while continuing to expansion the overall dimensions of the system, which remains open in all directions.

Management, insiders and close family and friends own nearly 45% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock, soils and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter.

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

Collective Mining Logo (CNW Group/Collective Mining Ltd.)
Collective Mining Logo (CNW Group/Collective Mining Ltd.)

SOURCE Collective Mining Ltd.

Cision
Cision

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/April2023/18/c9383.html

Categories
Energy Junior Mining Silver Bullet Mines

Silver Bullet Mines Corp. Announces Cash Advance on First Order

Burlington, Ontario–(Newsfile Corp. – April 17, 2023) – Silver Bullet Mines Corp. (TSXV: SBMI) (OTCQB: SBMCF) (‘SBMI’ or ‘the Company’) announces it has entered into a cash advance from a purchaser of SBMI’s silver products (the “Purchaser”).

SBMI has previously announced an order for 50 kilograms of silver from the Purchaser, which order has since been increased to 500 kilograms (17,600 oz) of silver. The Purchaser has indicated a willingness to purchase 17,600 oz of silver from SBMI every month for the foreseeable future. Management reasonably believes SBMI has the capability to fill such monthly orders.

The Purchaser and SBMI have since entered into an agreement whereby the Purchaser would advance USD$225,000 against the first delivery of silver to it by SBMI. This advance would be secured by a conditional convertible debenture (the “Debenture”). The Debenture only becomes convertible in the event SBMI does not deliver USD$225,000 of silver to the Purchaser within 60 days of SBMI receiving the USD$225,000 advance. This amounts to a little more than 9,000 oz of silver, depending upon the spot price at the time of delivery.

The principal amount of the Debenture would decrease as SBMI delivers silver to the Purchaser, and would expire upon the delivery of USD$225,000 worth of silver to the Purchaser. Once SBMI has delivered USD$225,000 worth of silver to the Purchaser, the Debenture would expire. The Debenture would accrue interest at the rate of 3% per month on the outstanding principal for one month, which interest begins to accrue after 30 days. After 60 days either the interest converts with the Debenture, or if SBMI has delivered USD$225,000 worth of silver to the Purchaser the obligation to pay interest would expire.

The funds would be advanced by the Purchaser immediately after SBMI receives regulatory approval for the Debenture, and would be used for working capital purposes.

For further information, please contact:

John Carter
Silver Bullet Mines Corp., CEO
cartera@sympatico.ca
+1(905)302-3843

Peter M. Clausi
Silver Bullet Mines Corp., VP Capital Markets
pclausi@brantcapital.ca
+1 (416) 890-1232

Cautionary and Forward-Looking Statements

This news release contains certain statements that constitute forward-looking statements as they relate to SBMI and its subsidiaries. Forward-looking statements are not historical facts but represent management’s current expectation of future events, and can be identified by words such as “believe”, “expects”, “will”, “intends”, “plans”, “projects”, “anticipates”, “estimates”, “continues” and similar expressions. Although management believes that the expectations represented in such forward-looking statements are reasonable, there can be no assurance that they will prove to be correct.

By their nature, forward-looking statements include assumptions, and are subject to inherent risks and uncertainties that could cause actual future results, conditions, actions or events to differ materially from those in the forward-looking statements. If and when forward-looking statements are set out in this new release, SBMI will also set out the material risk factors or assumptions used to develop the forward-looking statements. Except as expressly required by applicable securities laws, SBMI assumes no obligation to update or revise any forward-looking statements. The future outcomes that relate to forward-looking statements may be influenced by many factors, including but not limited to: the impact of SARS CoV-2 or any other global virus; reliance on key personnel; the thoroughness of its QA/QA procedures; the continuity of the global supply chain for materials for SBMI to use in the production and processing of mineralized material; the presence of mineable economic mineralized material; shareholder and regulatory approvals; activities and attitudes of communities local to the location of the SBMI’s properties; risks of future legal proceedings; income tax matters; fires, floods and other natural phenomena; the rate of inflation; availability and terms of financing; distribution of securities; commodities pricing; currency movements, especially as between the USD and CDN; effect of market interest rates on price of securities; and, potential dilution. SARS CoV-2 and other potential global pathogens create risks that at this time are immeasurable and impossible to define.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/162627

Categories
Precious Metals

IMF Unveils New Global Currency Known As The “Universal Monetary Unit” To “Transform” World Economy

IMF Unveils New Global Currency Known As The “Universal Monetary Unit” To “Transform” World Economy

Authored by Michael Snyder via The Economic Collapse blog,

A new global currency just launched, but 99 percent of the global population has no idea what just happened. 

The “Universal Monetary Unit”, also known as “Unicoin”, is an “international central bank digital currency” that has been designed to work in conjunction with all existing national currencies.  This should set off alarm bells for all of us, because the widespread adoption of a new “global currency” would be a giant step forward for the globalist agenda.  The IMF did not create this new currency, but it was unveiled at a major IMF gathering earlier this week…

Today, at the International Monetary Fund (IMF) Spring Meetings 2023, the Digital Currency Monetary Authority (DCMA) announced their official launch of an international central bank digital currency (CBDC) that strengthens the monetary sovereignty of participating central banks and complies with the recent crypto assets policy recommendations proposed by the IMF.

Universal Monetary Unit (UMU), symbolized as ANSI Character, Ü, is legally a money commodity, can transact in any legal tender settlement currency, and functions like a CBDC to enforce banking regulations and to protect the financial integrity of the international banking system.

As the press release quoted above indicates, this new “Universal Monetary Unit” was created by the Digital Currency Monetary Authority.

So who in the world is the Digital Currency Monetary Authority?

Honestly, I had no idea until I started doing research for this article.

The press release says that the organization consists of “sovereign states, central banks, commercial and retail banks, and other financial institutions”…

The DCMA is a world leader in the advocacy of digital currency and monetary policy innovations for governments and central banks.  Membership within the DCMA consists of sovereign states, central banks, commercial and retail banks, and other financial institutions.

Basically, it sounds like a secretive cabal of international banks and national governments is conspiring to push this new currency down our throats.

We are being told that the “Universal Monetary Unit” is “‘Crypto 2.0”, and those that created it are hoping that it will be widely adopted by “all constituencies in a global economy”…

The DCMA introduces Universal Monetary Unit as Crypto 2.0 because it innovates a new wave of cryptographic technologies for realizing a digital currency public monetary system with a widespread adoption framework encompassing use cases for all constituencies in a global economy.

I don’t know about you, but this sounds super shady to me.

Of course the Digital Currency Monetary Authority is not the only one that has been working on a new digital currency.

The UK has also been working on one.

The same is true for the European Union.

And would it surprise anyone that the Biden administration is touting the potential benefits of a “digital form of the U.S. dollar”?  The following comes from the official White House website…

A United States central bank digital currency (CBDC) would be a digital form of the U.S. dollar. While the U.S. has not yet decided whether it will pursue a CBDC, the U.S. has been closely examining the implications of, and options for, issuing a CBDC. If the U.S. pursued a CBDC, there could be many possible benefits, such as facilitating efficient and low-cost transactions, fostering greater access to the financial system, boosting economic growth, and supporting the continued centrality of the U.S. within the international financial system.

I don’t think that it is a coincidence that governments all over the western world are simultaneously developing CBDCs.

And the IMF has actually already put together an extensive handbook “to assist central banks and governments throughout the world in their CBDC rollouts”…

The International Monetary Fund (IMF) is putting together a Central Bank Digital Currency (CBDC) handbook to assist central banks and governments throughout the world in their CBDC rollouts.

Published publicly on April 10, the “IMF Approach to Central Bank Digital Currency Capacity Development” report outlines the IMF’s multi-year strategy for aiding CBDC rollouts, including the development of a living “CBDC Handbook” for monetary authorities to follow.

A lot of people out there will cheer when these digital currencies are introduced.

But it is imperative to understand that once everyone is using them, your financial privacy will be almost totally gone.

Authorities will be able to track virtually everything that you buy and sell, and I am sure that they won’t hesitate to use that information against you.

Needless to say, the potential for tyranny in such a system is off the charts.

Can you imagine a world in which you are restricted from buying meat for a while because you have already used your “carbon credits” for the month?

Your “financial privileges” could potentially be restricted at any time at the whim of a government bureaucrat, and if you are a big enough troublemaker you could be “deplatformed” from the system permanently.

Of course in order for such a system to have real teeth, cash and other forms of payment will need to be phased out, and that is precisely what is happening right now in Europe.  The following comes from the official website of the European Parliament…

To restrict transactions in cash and crypto assets, MEPs want to cap payments that can be accepted by persons providing goods or services. They set limits up to €7000 for cash payments and €1000 for crypto-asset transfers, where the customer cannot be identified.

Ultimately, they will just keep lowering the limits until the use of cash is almost completely eliminated.

Everyone will be slowly but surely forced on to the new digital system, and it will be a system that they control with an iron fist.

And most people will willingly go along with it.  These days, most people are just scraping by from month to month and one recent survey found that 70 percent of all Americans are “financially stressed” at this point…

Inflation, economic instability and a lack of savings have an increasing number of Americans feeling financially stressed.

Some 70% of Americans admit to being stressed about their personal finances these days and a majority — 52% — of U.S. adults said their financial stress has increased since before the Covid-19 pandemic began in March 2020, according to a new CNBC Your Money Financial Confidence Survey conducted in partnership with Momentive.

Most Americans simply do not care that these new digital currencies could open a door for great tyranny.

They just want to be able to pay the bills and take care of their families, and if our politicians tell them that this new system is good for the economy they will be all for it.

But those of us that are awake know that more globalism doesn’t lead anywhere good.

Concentrating even more power in the hands of the international elite is always a bad idea, and hopefully we can start to get more people to understand this.

*  *  *

Michael’s new book entitled “End Times” is now available in paperback and for the Kindle on Amazon.com, and you can check out his new Substack newsletter right here.

Tyler Durden
Sat, 04/15/2023 – 10:30

Original Source: https://www.nxtmine.com/economics/imf-unveils-new-global-currency-known-as-the-universal-monetary-unit-to-transform-world-economy/

Categories
Base Metals Collective Mining Energy Junior Mining

Collective Mining Drills 271.30 Metres at 3.35 g/t Gold Equivalent from Surface and Expands the Dimensions of the High-Grade Shallow Zone of the Apollo Porphyry System to the West

  • Hole APC-43, cut the longest continuous interval drilled to date of high-grade copper-silver-gold mineralization beginning at surface from Pad 7 at the Apollo system with results as follows:
  • Step out drill hole APC-40 also intercepted high-grade copper-silver-gold mineralization beginning from surface as follows:
  • APC-40 successfully extended the strike length of the shallow mineralization to the west of the previously known mineralization envelope and as a result has expanded the maximum known area of shallow mineralization to 150 metres X 130 metres (previously 130m X 130m).
  • The grade tenor and continuity of the intersections in APC-40 and APC-43 reflect an increased understanding of the dip and geometry of the southernmost, high-grade portion of the Apollo system. The surface dimensions of the shallow mineralization remain open for further expansion with drill holes from newly completed Pad 9 and Pad 10 now underway.
  • Five additional holes have been completed from Pad 6 and Pad 7 with assay results expected in the near term. APC-44 is the longest hole drilled to date as part of the shallow drilling program and cut more than 425 metres of continuous visual mineralization beginning at surface. APC-41 and APC-42 were shorter holes designed to test the contact between the breccia and the quartz diorite porphyry with very intense late-stage porphyry veining observed in APC-42. Assay results are expected in the near term.
  • The Company has commenced a long step out drill hole of up to 1,000 metres to the northwest from Pad 6. Presently, the hole (APC-49) is cutting mineralization, which began at surface, to its current depth of 783 metres.

Ari Sussman, Executive Chairman commented: “The latest assay results continue to demonstrate that the Apollo system has world-class grades for an outcropping bulk tonnage porphyry system. With a strong treasury now in hand due to the recently closed financing, the Company will aggressively look to expand the Apollo system with step out deep drill holes like APC-49 currently underway and by testing satellite targets within the Apollo area. More details on the revised and expanded drilling plan for the remainder of 2023 will be provided shortly.”

TORONTO, April 11, 2023 /CNW/ – Collective Mining Ltd. (TSXV: CNL) (OTCQX: CNLMF) (“Collective” or the “Company”) is pleased to announce assay results from an additional two drill holes completed from Pad 7. Drilling at Apollo in 2023 has been focused on discovering and defining shallow, high-grade mineralization below surface outcrops. With additional financing in place, the Company has expanded the aim of the program to include long step out holes. The Apollo porphyry deposit is a high-grade, bulk tonnage copper-silver-gold system, which owes its excellent metal endowment to an older copper-silver and gold porphyry system being overprinted by younger precious metal rich, carbonate base metal vein systems (intermediate sulphidation porphyry veins) within a magmatic, hydrothermal inter-mineral breccia body currently measuring 395 metres x 385 metres x 915 metres and open for expansion.

Details (See Table 1 and Figures 1-5)

The Phase II drilling program of 2023 is advancing on schedule with eleven holes completed and a further five holes in the lab awaiting assay results. Since the discovery of the Apollo porphyry system was announced in June 2022, a total of 42 drill holes (approximately 18,000 metres) have been completed and assayed. Assay results and geological observations for APC-40 and APC-43 are summarized below.

APC-40 was drilled to the southwest from Pad 7 to a maximum downhole depth of 214.55 metres and was targeted to intersect the contact zone between the mineralized breccia and the adjacent porphyry mineralization to the southwest. The hole intersected continuous and strong copper, silver and gold mineralization from surface bedrock to a depth of 169.25 metres (188 metres vertical due to topography) with the following assay results highlighted below:

  • 169.25 metres @ 2.81 g/t gold equivalent (consisting of 1.93 g/t gold, 19 g/t silver and 0.38% copper) including:

The mineralized interval starts from 1.5 metres depth with saprolite material followed by saprock and then continues with iron oxides and sulphides until a downhole depth of 18.25 metres. Below the oxide transition zone, the intercept passes into fresh rock consisting of quartz diorite breccia with a matrix of chalcopyrite (0.5% to 1.2%), pyrite (up to 1.5%) and 1% pyrrhotite. Higher-grade zones encountered from 18.25 metres and 87.85 metres downhole reflect zones with a higher percentage of sulphides plus quartz and carbonate in the matrix and reflect areas of higher permeability within the porphyry system.

APC-43 was drilled to the northwest from Pad 7 to a maximum downhole depth of 293 metres. The hole targeted the steeply dipping, southern high-grade zone as outlined by previous drilling from Pad 7 (Holes APC-36 and APC-38). The hole intersected continuous mineralization from surface outcrop to a downhole depth of 271.30 metres (282 metres vertical due to topography) with assay results as follows:

  • 271.30 metres @ 3.35 g/t gold equivalent (consisting of 2.37 g/t gold, 23 g/t silver and 0.42% copper) including:

The mineralized interval starts from surface to 3.9 metres depth within saprolite material followed by an additional 8.1 metres of saprock with iron oxides to 12 metres before transitioning into a zone with an oxidized sulphide matrix. From 19.30 metres the intercept passes into fresh rock with a sulphide composition of 0.5% to 1.3% chalcopyrite, 1.8% pyrite and pyrrhotite (up to 1.3%). The higher-grade zones commencing at 19.30 metres and 214.70 metres downhole relate to zones with a higher percentage of sulphides plus quartz and carbonate in the matrix and reflect areas of higher permeability within the porphyry system.

The grade tenor and continuity of the intersections in APC-40 and APC-43 reflect an increased understanding of the dip and geometry of the southern, high grade portion of the Apollo porphyry as gained from previous initial drilling in this area (holes APC-36 and APC-38, see press release dated March 30, 2023 for further details). Outcropping mineralization in the south dips steeply to the northwest and APC-43 has extended the mineralization another 100 metres vertically in this direction. APC-40 has extended the known area of shallow mineralization laterally and now measures 150 metres X 130 metres (previously 130 metres X 130 metres).

Outcrop mapping and sampling in the south and central portions of the system has outlined a 150 metre-by-130 metre area of known surface mineralization, which is open in all directions.  Pads 6 and 7 have been designed with the objective of understanding the styles and tenor of the shallow, high-grade mineralization from surface down to depths of up to 400 metres and Pad 6 is ideally situated for further step out holes to understand grade continuity at depth. In particular, short holes from Pad 6 (APC-41 and APC-42) have been targeted to intersect high grades at the contact zone between breccia and porphyry as previously announced in APC-29 which intersected 32 metres @ 10.48 g/t gold equivalent from a downhole depth of 112.10 metres below surface. (see press release dated January 31, 2023)

Deep drilling (APC-49) has recently commenced from Pad 6 with visuals highlighting continuous porphyry and breccia style mineralization from surface to its current depth of 783 metres. Drilling of APC-49 continues as of publication of this release and represents the longest mineralized intercept drilled to date into the Apollo system.

Five additional shallow drill holes have been completed from drill Pads 6 and 7 with fan drilling in various directions extending the outcropping mineralization to the west and northeast. Visual observations indicate continuous mineralization from surface over core lengths ranging from more than 80 metres to more than 425 metres. The Company presently has three diamond drill rigs operating at the Apollo project and additional assay results are expected in the near term.

Two new pads have recently been completed (Pad 9 and Pad 10) with drilling underway from both pads. The pad locations were chosen in order to provide more drilling options to test the potential for westerly and easterly extensions of the shallow portion of the Apollo system.

The Apollo target area, as defined to date by surface mapping, rock sampling and copper and molybdenum soil geochemistry, covers a 1,000 metres X 1,200 metres area and represents a large and unusually high-grade Cu-Ag-Au porphyry system. Mineralization styles include early-stage porphyry veins, inter-mineral breccia mineralization and multiple zones of porphyry related late stage, sheeted, carbonate-base metal veins with high gold and silver grades. The Apollo target area is still expanding as the Company’s geologists have found multiple additional outcrop areas with porphyry veining, breccia, and late stage, sheeted, carbonate base metal veins.

Table 1: Assays Results for APC-40 and APC-43

Hole #From
 (m)		To
(m)		Intercept
Interval(m)		Au
(g/t)		Ag
(g/t)		Cu
%		Mo
%		AuEq
(g/t)*		CuEq
(%)*
APC-401.50170.75169.251.93190.380.0032.811.50
Incl**1.5018.2516.752.90160.180.0023.37
18.2530.2011.959.4580.160.0029.57
87.85132.7044.852.58300.610.0053.99
APC-43–271.30271.302.37230.420.0023.351.79
Incl**–19.3019.304.0260.160.0024.28
19.3051.6032.304.3990.140.0044.65
127.80144.7016.904.02170.320.0024.71
214.70256.7542.055.07120.110.0025.29
*AuEq (g/t) is calculated as follows: (Au (g/t) x 0.97) + (Ag g/t x 0.016 x 0.88) + (Cu (%) x 1.87 x 0.90)+ (Mo (%)*11.43 x 0.85) and CuEq (%) is calculated as follows: (Cu (%) x 0.90) + (Au (g/t) x 0.51 x 0.97) + (Ag (g/t) x 0.009 x 0.88)+ (Mo(%)x 6.10 x 0.85) utilizing metal prices of Cu – US$4.10/lb, Ag – $24/oz Mo – US$25.00/lb and Au – US$1,500/oz and recovery rates of 97% for Au, 88% for Ag, 85% for Mo, and 90% for Cu. Recovery rate assumptions are speculative as limited metallurgical work has been completed to date. A 0.2 g/t AuEq cut-off grade was employed with no more than 15% internal dilution. True widths are unknown, and grades are uncut.
 (**) Zone of Oxidation
Figure 1: Plan View of the Apollo Porphyry System Highlighting Drill Holes APC-40 & APC-43 (CNW Group/Collective Mining Ltd.)
Figure 1: Plan View of the Apollo Porphyry System Highlighting Drill Holes APC-40 & APC-43 (CNW Group/Collective Mining Ltd.)
Figure 2: NW – SE Cross Section Highlighting APC-43 and APC-36 (CNW Group/Collective Mining Ltd.)
Figure 2: NW – SE Cross Section Highlighting APC-43 and APC-36 (CNW Group/Collective Mining Ltd.)
Figure 3: Plan View of the Guayabales Project Highlighting the Apollo Target Area (CNW Group/Collective Mining Ltd.)
Figure 3: Plan View of the Guayabales Project Highlighting the Apollo Target Area (CNW Group/Collective Mining Ltd.)
Figure 4: Core Photo Highlights from Drill Hole APC-40 (CNW Group/Collective Mining Ltd.)
Figure 4: Core Photo Highlights from Drill Hole APC-40 (CNW Group/Collective Mining Ltd.)
Figure 5: Core Photo Highlights from Drill Hole APC-43 (CNW Group/Collective Mining Ltd.)
Figure 5: Core Photo Highlights from Drill Hole APC-43 (CNW Group/Collective Mining Ltd.)

About Collective Mining Ltd.

To see our latest corporate presentation and related information, please visit www.collectivemining.com

Founded by the team that developed and sold Continental Gold Inc. to Zijin Mining for approximately $2 billion in enterprise value, Collective Mining is a copper, silver, and gold exploration company with projects in Caldas, Colombia. The Company has options to acquire 100% interests in two projects located directly within an established mining camp with ten fully permitted and operating mines.

The Company’s flagship project, Guayabales, is anchored by the Apollo target, which hosts the large-scale, bulk-tonnage and high-grade copper-silver-gold Apollo porphyry system. The Company’s near-term objective is to drill the shallow portion of the porphyry system while continuing to expansion the overall dimensions of the system, which remains open in all directions.

Management, insiders and close family and friends own nearly 45% of the outstanding shares of the Company and as a result, are fully aligned with shareholders. The Company is listed on the TSXV under the trading symbol “CNL” and on the OTCQX under the trading symbol “CNLMF”.

Qualified Person (QP) and NI43-101 Disclosure

David J Reading is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 (“NI 43-101”) and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same. Mr. Reading has an MSc in Economic Geology and is a Fellow of the Institute of Materials, Minerals and Mining and of the Society of Economic Geology (SEG).

Technical Information

Rock and core samples have been prepared and analyzed at SGS laboratory facilities in Medellin, Colombia and Lima, Peru. Blanks, duplicates, and certified reference standards are inserted into the sample stream to monitor laboratory performance. Crush rejects and pulps are kept and stored in a secured storage facility for future assay verification. No capping has been applied to sample composites. The Company utilizes a rigorous, industry-standard QA/QC program.

Information Contact:

Follow Executive Chairman Ari Sussman (@Ariski) and Collective Mining (@CollectiveMini1) on Twitter

FORWARD-LOOKING STATEMENTS

This news release contains certain forward-looking statements, including, but not limited to, statements about the drill programs, including timing of results, and Collective’s future and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties, and assumptions. Many factors could cause actual results, performance, or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully, and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, Collective cannot assure readers that actual results will be consistent with these forward-looking statements. These forward-looking statements are made as of the date of this news release, and Collective assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

Collective Mining Logo (CNW Group/Collective Mining Ltd.)
Collective Mining Logo (CNW Group/Collective Mining Ltd.)

SOURCE Collective Mining Ltd.

Cision
Cision

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/April2023/11/c5675.html